Quick-Connects, QC, QF, QM, And QTM Series (MS-01
Quick-Connects—QC, QF, QM, and QTM Series1www.swagelok.comQ uick- Conne ctsQUICKCONNECTSQC, Q F, Q M, a nd QTM Se r ie s No twisting, turning, or wrenching necessary Single-end shutoff, double-end shutoff, and full-flow models
2Hose, Quick-Connects, and Sample CylindersContentsMiniature Quick-ConnectsQM Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Full-Flow Quick-ConnectsQF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9PTFE-Sealed Quick-ConnectsQTM Series (Standard and Keyed) . . . . . . . . . . . . . . . . . . . 15QUICKCONNECTSInstrumentation Quick-ConnectsQC Series (Standard and Keyed) . . . . . . . . . . . . . . . . . . . . . . 3Swagelok Quick-ConnectsCouplingOperation of Swagelok Quick‑ConnectsAny quick-connect stem will fit any quick-connect body ofthe same series and size. Use filters ahead of quick-connects.Examples: Any QC4 stem will fit any QC4 body.Any QC8 stem will fit any QC8 body. Use body and stem protectors or dust caps onuncoupled bodies and stems. Align bodies and stems when coupling or uncoupling.Single- and Double-End Shutoff Stems Couple and uncouple quick-connects at roomSingle-end shutoff (SESO) stems have no valves andremain open when uncoupled. Couple and uncouple quick-connects during systemDouble-end shutoff (DESO) stems have valves and shut offwhen uncoupled. Support hanging hoses or other equipment to preventSpillage Relubricate stem seal O-rings periodically.Spillage is the amount of system fluid that escapes when aquick-connect is uncoupled (DESO only). Warning:Air InclusionAir inclusion is the amount of air trapped between thebody and stem that enters the system when a quickconnect is coupled (DESO only).Flow Coefficient (Cv)Cv is an average value and may vary 10 %. Cv is basedon like end connections on stem and body. For unlike endconnections, average the two Cv values.End ConnectionsAdditional end connections—such as ISO parallel andtapered thread, AN thread,pipe weld—are available.Where these end connectionsare not listed, a tube adaptercan be used to create a twopiece ass embly. For moreinformation on tube adapters,see the Swagelok GaugeableTube Fittings and AdapterFittings catalog, MS-01-140.temperature.cleaning operations.side load. Pressure rating restrictions apply when couplingand uncoupling. Do not uncouple single-end shutoff quick-connectsunder pressure.Caution: Do not rotate quick-connects while coupled. Do not insert foreign objects into uncoupled bodies orstems.
Quick-Connects—QC, QF, QM, and QTM SeriesInstrumentation Quick-ConnectsQC Series3Single-End Shutoff (SESO)FeaturesStemLockingdogs RedesignedInsert sealO-ringBody valveO-ringSWAGELOKSWAGELOKstem insertrequires just oneO-ring seal, yetimproves O-ringcontainment.Stem sealO-ring New-design stems and bodiesinterchange with old-design stemsand bodies.Stem sleeveBody sleeveHousingBody Locking dog mechanism with largecontact area retains stem.quick, easy operation.Flow Direction QUICKCONNECTS Push-to-connect coupling enablesDouble-End Shutoff (DESO)—Red Stem Sleeve Wide variety of options, includingkeyed quick-connects, are available.DESO valve O-ring Heavy-duty sleeve shields open endof body.SWAGELOKSWAGELOKMaterials of ConstructionSpillage and Air InclusionMaterialComponent316 SSBrassBody, stem, bodyvalve, body insert316 SSBrass C36000DESO valve,DESO retainer316 SSQC4: 316 SSQC6/QC8: Brass C36000SESO stem insert316 SSBrass C26000O-ringsFluorocarbon FKM,ethylene propylene,perfluorocarbon FFKMBuna Nat 70 F (20 C)Standard DESO and BodySeriesQC4QC6QC8Spillagecm30.31.03.0Springs316 SSMaximum Flow RateSnap rings302 SSat 70 F (20 C)SESO and Full Flow BodyBody sleevePowdered metal300 series SSBrass C36000Housing316 SSBrass C36000DESO stem sleevePolyurethane enamelcoated 316 SSPolyurethane enamelcoated brass C36000316 SSBrass C36000SESO stem sleeveLocking dogsXylan -coated 316 SS powdered etted components listed in italics.Other O‑ring materials and lubricants available. Contact your authorizedSwagelok sales and service representative.SeriesWater FlowU.S. gal/min(L/min)QC44 (15)QC66 (22)QC810 (37)Air Inclusioncm30.31.03.0
4Hose, Quick-Connects, and Sample CylindersPressure-Temperature Ratings, QC SeriesQC4 SeriesQC6 SeriesMaterialO-RingMaterial316 SSFluoro carbonFKMTemperature F ( C)BrassPerfluoro carbonFFKM➀➁EthylenepropyleneBuna NPressure Ratingpsig (bar)MaterialO-RingMaterial316 SSFluoro carbonFKMTemperature F ( C)QUICKCONNECTSEthylenepropyleneBuna NPressure Ratingpsig (bar)Coupled–50 (–45)BrassPerfluoro carbonFFKM➀➁Coupled—3000 (206)——–50 (–45)—1500 (103)——0 (–17)—3000 (206)—2000 (137)0 (–17)—1500 (103)—1000 (68.9)10 (–12)3000 (206)3000 (206)—2000 (137)10 (–12)1500 (103)1500 (103)—1000 (68.9)60 (15)3000 (206)3000 (206)3000 (206)2000 (137)60 (15)1500 (103)1500 (103)1500 (103)1000 (68.9)100 (37)3000 (206)3000 (206)3000 (206)2000 (137)100 (37)1500 (103)1500 (103)1500 (103)1000 (68.9)150 (65)2750 (189)2750 (189)2750 (189)1300 (89.5)150 (65)1350 (93.0)1350 (93.0)1350 (93.0)700 (48.2)200 (93)2300 (158)2300 (158)2300 (158)700 (48.0)200 (93)1150 (79.2)1150 (79.2)1150 (79.2)450 (31.0)250 (121)1850 (127)1850 (127)1850 (127)300 (20.6)250 (121)970 (66.8)970 (66.8)970 (66.8)300 (20.6)300 (148)1400 (96.4)1400 (96.4)1400 (96.4)—300 (148)750 (51.6)750 (51.6)750 (51.6)—350 (176)950 (65.4)—950 (65.4)—350 (176)580 (39.9)—580 (39.9)—400 (204)500 (34.4)—500 (34.1)➀—400 (204)400 (27.5)—400 (27.5)➀——150 (10.3)➁—500 (260)—150 (10.3)➁—500 (260)—Uncoupled and When Coupling and Uncoupling70 (20)Uncoupled and When Coupling and Uncoupling250 (17.2)70 (20)➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).O-RingMaterial316 SSFluoro carbonFKMTemperature F ( C)EthylenepropyleneBrassPerfluoro carbonFFKM➀➁Buna NPressure Ratingpsig (bar)Coupled–50 (–45)—750 (51.6)——0 (–17)—750 (51.6)—500 (34.4)10 (–12)750 (51.6)750 (51.6)—500 (34.4)60 (15)750 (51.6)750 (51.6)750 (51.6)500 (34.4)100 (37)750 (51.6)750 (51.6)750 (51.6)500 (34.4)150 (65)680 (46.8)680 (46.8)680 (46.8)400 (27.5)200 (93)600 (41.3)600 (41.3)600 (41.3)350 (24.1)250 (121)520 (35.8)520 (35.8)520 (35.8)300 (20.6)300 (148)440 (30.3)440 (30.3)440 (30.3)—350 (176)360 (24.8)—360 (24.8)——300 (20.6)➀150 (10.3)➁—400 (204)500 (260)300 (20.6)——Uncoupled and When Coupling and Uncoupling70 (20)250 (17.2)➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).250 (17.2)➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).QC8 SeriesMaterial——
Quick-Connects—QC, QF, QM, and QTM Series5Ordering Information and Dimensions, QC SeriesDimensions are for reference only andare subject to change.AF flatFluorocarbon FKM O-rings are standard for 316 SSbodies and DESO stems; for other materials, add anO-ring material designator to the ordering number.Select a basic ordering number andadd a material designator.O-Ring MaterialDesignatorMaterialDesignatorEthylene propyleneEP316 SSSSPerfluorocarbon FFKM withsilicone-based lubricantKRPerfluorocarbon FFKM withPTFE-based lubricantKZBrassBExample: SS-QC4-S-200Example SS-QC4-B-200EPStemsFittingSizeFlow Coefficient (Cv)BasicOrdering SODESOF, in.Dimensions, in. (mm)1/8-QC4-S-200-QC4-D-200➀QC40.080.080.082.32 (58.9)2.77 6 (59.9)2.42 (61.5)5/83/8-QC6-S-600-QC6-D-600QC61.00.51.52.52 (64.0)2.64 (67.1)3/41/2-QC8-S-810-QC8-D-810QC82.41.53.32.96 (75.2)3.16 (80.3)15/165/8Dimensions, mm (in.)6-QC4-S-6M0-QC4-D-6M0QC40.30.20.459.9 (2.36)61.5 (2.42)10-QC6-S-10M0-QC6-D-10M0QC61.00.51.567.3 (2.65)70.4 (2.77)3/412-QC8-S-12M0-QC8-D-12M0QC82.41.53.375.2 (2.96)80.3 (3.16)15/16Dimensions shown with Swagelok tube fitting nuts finger-tight.➀ -QC4-D-200 is a two-piece assembly.Male Pipe ThreadsPipeSizein.Flow Coefficient (Cv)BasicOrdering NumbersSESODESOSeriesSESODESOFullFlowDimensions, in. )15/16ISO/BSP Tapered1/4-QC4-S-4MT-QC4-D-4MTQC40.30.20.42.22 (56.4)2.28 (57.9)3/8-QC6-S-6MT-QC6-D-6MTQC60.80.51.62.35 (59.7)2.47 (62.7)3/41/2-QC8-S-8MT-QC8-D-8MTQC82.01.33.12.84 (72.1)3.04 (77.2)15/16Female Pipe ThreadsPipeSizein.Flow Coefficient (Cv)BasicOrdering NumbersSESODESOSeriesSESO5/8Dimensions, in. PFQC40.30.20.42.01 (51.1)2.07 PFQC4QC60.30.90.20.50.41.52.26 (57.4)2.35 (59.7)2.32 (58.9)2.47 5 (59.7)2.47 (62.7)7/81/2-QC8-S-8PF-QC8-D-8PFQC82.01.33.12.82 (71.6)3.02 (76.7) 1 1/16ISO/BSP Tapered1/4-QC4-S-4FT-QC4-D-4FTQC40.30.20.42.26 (57.4)2.32 (58.9)3/43/8-QC6-S-6FT-QC6-D-6FTQC60.80.51.62.35 (59.7)2.47 (62.7)7/81/2-QC8-S-8FT-QC8-D-8FTQC82.01.33.12.82 (71.6)3.02 (76.7) 1 1/16See next page for bodies.QUICKCONNECTSSwagelok Tube Fitting
6Hose, Quick-Connects, and Sample CylindersOrdering Information and Dimensions, QC SeriesDimensions are for reference only and are subject to change.Insertion DepthTo calculate overall length in thecoupled position, subtract the insertiondepth from any overall stem and bodycombination length.ADepth, in. (mm)HSeriesBodiesSwagelok Tube 09 (27.7) 1.15 (29.2)QC61.18 (30.0) 1.30 (33.0)QC81.48 (37.6) 1.68 (42.7)DimensionsSeriesAHQUICKCONNECTSDimensions, in. (mm)1/8-QC4-B-200QC42.26 (57.4)0.91 (23.1)Full-Flow Quick-Connects1/4-QC4-B-400QC42.30 (58.4)0.91 (23.1)3/8-QC6-B-600QC62.58 (65.5)1.03 (26.2)1/2-QC8-B-810QC83.09 (78.5)1.21 (30.7)A full-flow QC series quick-connectconsists of a SESO stem and a full-flowbody.Dimensions, mm (in.)6-QC4-B-6M0QC458.4 (2.30)23.1 (0.91)10-QC6-B-10M0QC668.1 (2.68)26.2 (1.03)12-QC8-B-12M0QC878.5 (3.09)30.7 (1.21)Dimensions shown with Swagelok tube fitting nuts finger-tight.Male Pipe ThreadsExample: SS-QC4-S-200To order a full-flow body, select a basicordering number and add a materialdesignator and MB.Example: ions, in. (mm)SeriesAHNPT1/8-QC4-B-2PMQC42.01 (51.1)0.91 (23.1)1/4-QC4-B-4PM-QC6-B-4PMQC4QC62.16 (54.9)2.38 (60.5)0.91 (23.1)1.03 (26.2)3/8-QC6-B-6PMQC62.38 (60.5)1.03 (26.2)1/2-QC8-B-8PMQC82.97 (75.4)1.21 (30.7)1/4-QC4-B-4MTQC42.16 (54.9)0.91 (23.1)3/8-QC6-B-6MTQC62.38 (60.5)1.03 (26.2)1/2-QC8-B-8MTQC82.97 (75.4)1.21 2.42 (61.5)0.91 (23.1)3/8-QC6-B-6FTQC62.57 (65.3)1.03 (26.2)1/2-QC8-B-8FTQC83.22 (81.8)1.21 (30.7)ISO/BSP TaperedFemale Pipe ThreadsTo order a SESO stem, select a basicordering number and add a materialdesignator.Dimensions, in. (mm)AHQC42.16 (54.9)0.91 (23.1)QC4QC62.42 (61.5)2.54 (64.5)0.91 (23.1)1.03 (26.2)-QC6-B-6PFQC62.57 (65.3)1.03 (26.2)-QC8-B-8PFQC83.22 (81.8)1.21 (30.7)NPTISO/BSP Tapered
Quick-Connects—QC, QF, QM, and QTM Series7Ordering Information and Dimensions, QC SeriesDimensions are for reference only and are subject to change.Bulkhead StemsSwagelok Tube FittingADimensionsBasicOrdering NumbersFittingSizeSESOMaxMinPanelPanelThickness Hole DiaADESOSeriesF flatSESODESOF5/80.25 (6.4) 15/32 (11.9)Dimensions, in. (mm)1/4-QC4-S1-400-QC4-D1-400QC42.74 (69.6)2.80 (71.1)3/8-QC6-S1-600-QC6-D1-600QC62.92 (74.2)3.07 (78.0)3/40.27 (6.9) 19/32 (15.1)1/2-QC8-S1-810-QC8-D1-810QC83.43 (87.1)3.63 (92.2)15/160.26 (6.6) 25/32 (19.8)Dimensions, mm (in.)C-PH-377 DIMGELOK QUICK CONNECTS- MS-01-138-QC4-S1-6M0-QC4-D1-6M0QC469.6 (2.74)71.1 (2.80)166.4 (0.25)11.5 (29/64)10-QC6-S1-10M0-QC6-D1-10M0QC677.7 (3.06)78.7 (3.10)226.9 (0.27)16.7 (21/32)12-QC8-S1-12M0-QC8-D1-12M0QC887.1 (3.43)92.2 (3.63)246.6 (0.26)19.6 (49/64)Dimensions shown with Swagelok tube fitting nuts finger-tight.Bulkhead BodiesBasicOrderingNumberFittingSizeSwagelok Tube FittingSeriesDimensionsMaxMinPanelPanelHThickness Hole DiaADimensions, in. (mm)AH1/4-QC4-B1-400QC42.67 (67.8)0.91 (23.1)0.25 (6.4) 15/32 (11.9)3/8-QC6-B1-600QC62.98 (75.7)1.03 (26.2)0.27 (6.9) 19/32 (15.1)1/2-QC8-B1-810QC83.56 (90.4)1.21 (30.7)0.26 (6.6) 25/32 (19.8)6-QC4-B1-6M0QC467.8 (2.67)23.1 (0.91)6.4 (0.25)11.9 (15/32)10-QC6-B1-10M0QC675.9 (2.99)26.2 (1.03)6.9 (0.27)16.7 (21/32)12-QC8-B1-12M0QC890.4 (3.56)30.7 (1.21)6.6 (0.26)19.6 (49/64)Dimensions, mm (in.)Dimensions shown with Swagelok tube fitting nuts finger-tight.Options, QC SeriesStem and Body ProtectorsStem and body protectors guardagainst damage and contaminantswhen bodies and stems are uncoupled.Protectors are not pressurecontaining devices; for pressureretaining protectors, contact yourauthorized Swagelok representative.Stem ProtectorsMaterialsOrdering InformationComponentProtectorMaterial316 SS or platedbrass C36000Lanyard302 SSLanyard clamps304 SSTo order, select a basic orderingnumber and add SS for stainless steelor B for brass.SeriesBody ProtectorsBasic Ordering QC6-QC6-SP-QC6-BPQC8-QC8-SP-QC8-BPExample: SS-QC4-SPKeyed ProtectorsStandardKeyedStandardKeyedTo order a keyed protector, add a keydesignator from the table on page 8to the ordering number.Example: SS-QC4-SPK1QUICKCONNECTS6
8Hose, Quick-Connects, and Sample CylindersOptions, QC SeriesKeyed QC SeriesSwagelok keyed quick-connects provide apositive mechanical lockout system to preventaccidental intermixing of different lines inmultifluid or multipressure systems.KeyedsleeveFeatures Keyed quick-connects will not interchangewith any other Swagelok keyed quickconnects If an attempt is made to couple unlike keys,the valve system will not open.QUICKCONNECTS Stems and bodies are color coded andnumbered for easy identification.QC Series Key Numbers and Sleeve Outside DiametersOrdering Informationfor use in calculating alignment positions when panel mountingTo order, add a key number designatorto a QC series quick-connect e Outside Diameter, in. (mm)QC4BodyQC6StemBodyQC8StemBodyStemBlackK10.96 (24.4) 0.82 (20.8) 1.13 (28.7) 0.99 (25.1) 1.26 (32.0) 1.10 (27.9)OrangeK20.99 (25.1) 0.85 (21.6) 1.16 (29.5) 1.02 (25.9) 1.29 (32.8) 1.14 (29.0)GreenK31.02 (25.9) 0.88 (22.4) 1.19 (30.2) 1.05 (26.7) 1.32 (33.5) 1.17 (29.7)YellowK41.05 (26.7) 0.91 (23.1) 1.22 (31.0) 1.08 (27.4) 1.35 (34.3) 1.20 (30.5)BlueK51.08 (27.4) 0.94 (23.9) 1.24 (31.5) 1.11 (28.2) 1.38 (35.1) 1.23 (31.2)WhiteK61.11 (28.2) 0.97 (24.6) 1.28 (32.5) 1.14 (29.0) 1.41 (35.8) 1.26 (32.0)PurpleK71.14 (29.0) 1.00 (25.4) 1.31 (33.3) 1.17 (29.7) 1.44 (36.6) 1.29 (32.8)BrownK81.17 (29.7) 1.03 (26.2) 1.34 (34.0) 1.20 (30.5) 1.47 (37.3) 1.32 (33.5)Bulkhead Bodies withTwo Panel NutsLow-Profile SleeveLow-profilesleeveG nut hexB2bulkheadfemaleNPTThis option is available for use in areaswhere space is limited.DimensionsOrdering InformationDimensions, in. (mm)Max Panel Min PanelThicknessHole DiaSeriesGQC47/80.20 (5.1)QC615/160.25 (6.4)27/32 (21.4)QC81 1/80.31 (7.9)1 1/32 (26.2)23/32 (18.3)Ordering InformationTo order, replace B in the orderingnumber with B2.Example: SS-QC4-B2-400B2 style bulkhead body is availableonly with low-profile IS sleeve.To order, add IS to the orderingnumber.Example: SS-QC4‑B‑400ISExample: SS-QC4-S-200K1Additional End ConnectionsOther end connections may beavailable from the factory as two-piececomponents. Contact your authorizedSwagelok representative for information.
Quick-Connects—QC, QF, QM, and QTM Series9Full Flow Quick-ConnectsQF SeriesFeaturesMaterials of Construction Compact coupling offers full flow without orifice restrictions. O-ring is easily replaced without disassembling body.MaterialComponent316 SSBrassBody, stem316 SSBrass C36000Spring, snap ring,locking balls Bidirectional flowSleeve316 SSBrass C36000O-ringFluorocarbon FKM,ethylene propylene,perfluorocarbonFFKMBuna NLubricants Silicone-basedWetted components listed in italics.Other O‑ring materials and lubricants available. Contact your authorizedSwagelok representative. Warning: Do not uncouple under pressure.Pressure-Temperature Ratings, QF SeriesPressure ratings may be limited by end connections.QF4 Series and QF8 SeriesQF12 Series and QF16 SeriesMaterial316 SSO-RingMaterialFluoro Perfluoro carbon EthylenecarbonFKM propylene FFKM➀➁SeriesBrassQF4 and QF8Temperature F ( C)MaterialBuna NQF4QF8Pressure Ratingpsig (bar)–50 (–45)—0 (–17)—10 (–12)40 (4)100 (37)150 (65)200 (93)250 (121)300 (148)350 (176)400 (204)500 50004000(344)(275)5000(344)200 (13.7)4000(275)3000300 (148)1400 (96.4)200 (13.7)1400 (96.4)—27002000350 (176)800 (55.1)—800 (55.1)—(186)(137)400 (204)200 (13.7)—200 (13.7)➀—500 (260)—150 (10.3)➁—(206)—➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).1300 (89.5)700 (48.2)—200➁3500 (241)2100 (144)—(13.7)2000 (137)700 (48.2)——2000 (137)3500 (241)2100 (144)——4000 (275)250 (121)—400➀4000 (275)(206)—(27.5)4000 (275)3000——2000 (137)100 (37)4000(275)(20.6)4002000 (137)4000 (275)2800 (192)(20.6)(27.5)—4000 (275)1300 (89.5)300(82.6)4000 (275)4000 (275)2800 (192)30012004000 (275)40 (4)200 (93)3000—10 (–12)(206)1400(82.6)2000 (137)(275)30001200—150 (65)(68.9)(137)4000 (275)30001000(27.5)——4000(96.4)(137)—0 (–17)(206)1400(206)4000 (275)(275)4000(275)2000—3000(186)400–50 (–45)40002700(96.4)Pressure Ratingpsig (bar)—(275)(206)Buna N—40002000Temperature F ( C)EthylenepropyleneBrassPerfluoro 6 SSFluoro carbonFKM—➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).QUICKCONNECTS 316 SS
10Hose, Quick-Connects, and Sample CylindersOrdering Information and Dimensions, QF SeriesDimensions are for reference only andare subject to change.AF flatSelect a basic ordering number andadd a material designator.Fluorocarbon FKM O-rings are standard for 316 SSbodies; for other materials, add an O-ring materialdesignator to the ordering number.O-Ring MaterialDesignatorEPMaterialDesignatorEthylene propylene316 SSSSPerfluorocarbon FFKM withsilicone-based lubricantKRPerfluorocarbon FFKM withPTFE-based lubricantKZBrassBExample: SS-QF4-S-400Example SS-QF4-B-400EPQUICKCONNECTSStemsSwagelok Tube -1610Dimensions, in. (mm)QF42.21.77 (45.0)QF42.81.77 (45.0)QF82.91.88 (47.8)QF813.01.99 (50.5)QF1226.02.15 (54.6)QF1645.02.45 (62.2)9/1611/167/87/81 1/161 3/8-QF4-S-6M0Dimensions, mm (in.)QF42.245.0 6.1)(7.1)(10.4)(15.7)(22.4)4.8 (0.19)Dimensions shown with Swagelok tube fitting nuts finger-tight.Female Pipe F8QF8QF12QF16(63.2)3/47/81 1/161 1/161 5/161 5/81/41/2-QF4-S-4FT-QF8-S-8FTISO/BSP TaperedQF41.71.60 (40.6)QF811.51.82 (46.2)1 1/160.24 (6.1)0.50 (12.7)1/41/2-QF4-S-4FS-QF8-S-8FSQF4QF8ISO/BSP Parallel1.71.60 (40.6)11.51.82 (46.2)3/41 1/160.24 (6.1)0.50 s, in. 2.7)(18.3)(22.4)
Quick-Connects—QC, QF, QM, and QTM Series11Ordering Information and Dimensions, QF SeriesDimensions are for reference only and are subject to change.Insertion DepthATo calculate overall lengthin the coupled position,subtract the insertion depthfrom any overall stem andbody combination length.F umberSeriesADimensionsFin.SQF40.78 (19.8)QF80.81 (20.6)QF120.90 (22.9)QF160.94 -B-810-QF12-B-1210-QF16-B-1610Dimensions, in. (mm)QF41.80 (45.7)11/16QF41.81 (46.0)11/16QF82.17 (55.1)1 1/16QF82.23 (56.6)1 1/16QF12 2.45 (62.2)1 1/2QF16 2.75 (69.9)1 11/160.870.871.301.301.661.88(47.8)0.47 (11.9)0.62 (15.7)0.88 (22.4)-QF4-B-6M0Dimensions, mm (in.)QF445.7 (1.80)11/1622.1 (0.87)4.8 (0.19)(22.1)0.19 (4.8)(22.1)(33.0)0.28 (7.1)(33.0)(42.2)Dimensions shown with Swagelok tube fitting nuts finger-tight.Female Pipe ThreadsDimensions, in. F16-B-16PFQF4QF4QF8QF8QF12QF16NPT1.50 (38.1)1.63 (41.4)1.73 (43.9)1.73 (43.9)1.89 (48.0)2.12 (53.8)3/47/81 1/161 1/161 1/21 11/160.87 (22.1)0.87 (22.1)1.30 (33.0)1.30 (33.0)1.66 (42.2)1.88 -B-8FTISO/BSP TaperedQF41.50 (38.1)3/4QF81.73 (43.9)1 1/160.87 (22.1)1.30 (33.0)0.38 (9.7)0.63 (16.0)1/41/2-QF4-B-4FS-QF8-B-8FSQF4QF8ISO/BSP Parallel1.50 (38.1)3/41.73 (43.9)1 1/160.87 (22.1)1.30 (33.0)0.38 (9.7)0.63 (16.0)3/81/23/41Depthin. ICKCONNECTSSwagelok Tube FittingSeries
12Hose, Quick-Connects, and Sample CylindersOrdering Information and Dimensions, QF SeriesDimensions are for reference only and are subject to change.StemsPipeSizein.Male Pipe ThreadsBasicOrderingNumberDimensions, in. 4-S-4PMQF41.71.59 (40.4)9/160.24 (6.1)3/8-QF4-S-6PM-QF8-S-6PMQF4QF81.77.11.59 (40.4)1.65 (41.9)11/167/80.24 (6.1)0.41 (10.4)1/2-QF8-S-8PMQF811.51.84 (46.7)7/80.50 (12.7)3/4-QF12-S-12PMQF1223.62.03 (51.6)1 1/160.72 (18.3)1-QF16-S-16PMQF1639.02.35 (59.7)1 3/80.88 (22.4)1/4-QF4-S-4MTQF41.71.59 (40.4)9/160.24 (6.1)1/2-QF8-S-8MTQF811.51.84 (46.7)7/80.50 (12.7)-QF16-S-16MTQF1639.02.35 (59.7)1 3/80.88 (22.4)QUICKCONNECTSISO/BSP Tapered1ISO/BSP Parallel➀1/4-QF4-S-4MSQF41.71.60 (40.6)3/40.24 (6.1)1/2-QF8-S-8MSQF811.51.82 (46.2)1 1/160.50 (12.7)➀ Include a female 60 cone profile. They accept a 60 male cone with female swivel nut.BodiesPipeSizein.Male Pipe ThreadsDimensions, in. F4-B-4PMQF41.57 (39.9)11/160.87 (22.1)0.25 (6.4)3/8-QF4-B-6PM-QF8-B-6PMQF4QF81.57 (39.9)1.83 (46.5)11/161 1/160.87 (22.1)1.30 (33.0)0.37 (9.4)0.41 (10.4)1/2-QF8-B-8PMQF82.08 (52.8)1 1/161.30 (33.0)0.50 (12.7)3/4-QF12-B-12PMQF122.33 (59.2)1 1/21.66 (42.2)0.72 (18.3)1-QF16-B-16PMQF162.65 (67.3)1 11/161.88 (47.8)0.88 (22.4)1/4-QF4-B-4MTQF41.57 (39.9)11/160.87 (22.1)0.24 (6.1)1/2-QF8-B-8MTQF82.08 (52.8)1 1/161.30 (33.0)0.50 (12.7)-QF16-B-16MTQF162.65 (67.3)1 11/161.88 (47.8)0.88 (22.4)1/4-QF4-B-4MSQF41.80 (45.7)3/40.87 (22.1)0.24 (6.1)1/2-QF8-B-8MSQF82.08 (52.8)1 1/161.30 (33.0)0.47 (11.9)ISO/BSP Tapered1ISO/BSP Parallel➀➀ Include a female 60 cone profile. They accept a 60 male cone with female swivel nut.Options, QF SeriesStem and Body ProtectorsStem and body protectors guardagainst damage and contaminantswhen bodies and stems are uncoupled.Protectors are not pressurecontaining devices; for pressureretaining protectors, contact yourauthorized Swagelok representative.MaterialsComponentProtectorOrdering InformationMaterial316 SS or platedbrass C36000Lanyard302 SSLanyard clamps304 SSTo order, select a basic orderingnumber and add SS for stainless steelor B for brass.SeriesStem ProtectorBody ProtectorBasic Ordering F16-BPExample: SS-QF4-SP
Quick-Connects—QC, QF, QM, and QTM SeriesMiniature Quick-ConnectsQM ingBodysleeveBodyvalveO‑ring13Body Lightweight, compact design offersfingertip operation. Low dead volume reduces spillageand air inclusion.DESO valve springDESO valve O‑ring Materials of ConstructionMaterialBody, body insert,SESO stem insert,DESO adapter, stem316 SSBrass C36000O-RingMaterialTemperature F ( C)Fluorocarbon FKM,ethylene propylene,perfluorocarbonFFKM316 SSBrassPerfluoro carbonFFKM➀➁EthylenepropyleneBuna NPressure Ratingpsig (bar)Coupled316 SSSleeve, housing316 SSFluoro carbonFKMBuna NBrassDIMC36000C-PH-420A–50 (–45)—4000 (275)——0 (–17)—4000 (275)—2000 (137)10 (–12)4000 (275)4000 (275)—2000 (137)40 (4)4000 (275)4000 (275)4000 (275)2000 (137)100 (37)4000 (275)4000 (275)4000 (275)2000 (137)150 (65)3500 (241)3500 (241)3500 (241)1300 (89.5)200 (93)2800 (192)2800 (192)2800 (192)700 (48.0)250 (121)2100 (144)2100 (144)2100 (144)200 (13.7)Locking balls,snap rings316 SSLubricantsSilicone-based300 (148)1400 (96.4)1400 (96.4)1400 (96.4)—LubricantsPTFE-based350 (176)800 (55.1)—800 (55.1)—400 (204)200 (13.7)—200 (13.7)➀——150 (10.3)➁—Wetted components listed in italics.DIMand lubricants available. ContactC-PH-811your authorizedSwagelok representative.500 (260)WAGELOK ge and AirInclusion70 (20)Maximum Flow Rate0.1 cm31 U.S. gal/min (3.8 L/min)water at 70 F (20 C)(Standard DESO and Body)(SESO and Full Flow Body)—Uncoupled and When Coupling and Uncoupling100 (6.8)➀ With KR designator (silicone-based lubricant).➁ With KZ designator (PTFE-based lubricant).Ordering Information and Dimensions, QM SeriesAFflatDimensions are for reference onlyand are subject to change.Select a basic ordering numberand add a material designator.SESOAF flatMaterialDesignator316 SSSSBrassDESOFluorocarbon FKM O-rings are standard for 316SS bodies and DESO stems; for other materials,add an O-ring material designator to the orderingnumber.BExample: SS-QM2-S-100O-Ring MaterialDesignatorEthylene propyleneEPPerfluorocarbon FFKM withsilicone-based lubricantKRPerfluorocarbon FFKM withPTFE-based lubricantKZExample SS-QM2-B-100EPStemsSwagelok Tube FittingBasicFittingOrdering NumbersSizein.SESODESO1/16 -QM2-S-100-QM2-D-1001/8-QM2-S-200-QM2-D-200Flow Coefficient s shown with Swagelok tube fitting nuts finger-tight.Dimensions, in. (mm)ASESO1.18 (30.0)1.29 (32.8)DESO1.76 (44.7)1.87 (47.5)F7/16QUICKCONNECTSBrassOK QUICK CONNECTS- MS-01-138 Material316 SSO-ringsFlow DirectionBody valve springPressure-Temperature RatingsComponentBody valve,valve stop,DESO valve,DESO stem fin,springsHousing
14Hose, Quick-Connects, and Sample CylindersOrdering Information and Dimensions, QM SeriesDimensions are for reference only and are subject to change.StemsC-PH-420B DIM BasicNPTOrdering NumbersSizein.SESODESO1/16 -QM2-S-1PM -QM2-D-1PM1/8-QM2-S-2PM -QM2-D-2PMGELOK QUICK CONNECTS- MS-01-138Male NPTFlow Coefficient (Cv)SESODESOFullFlowSESODESOFQM20.060.050.061.03 (26.2)1.61 (40.9)7/16QUICKCONNECTSFlow Coefficient (Cv)BasicOrdering D-2PFASeriesFemale NPTNPTSizein.1/161/8Dimensions, in. s, in. (mm)ASESO1.03 (26.2)1.18 (30.0)DESO1.61 (40.9)1.81 (46.0)F7/169/16BodiesAF flatSwagelok Tube FittingFittingBasicSizeOrderingin.Number1/16 -QM2-B-1001/8-QM2-B-200Dimensions, in. (mm)SeriesQM2A1.50 (38.1)1.70 (43.2)F7/16Dimensions shown with Swagelok tube fitting nuts finger-tight.Male NPTFemale NPTTo calculate overall length in thecoupled position, subtract the insertiondepth from any overall stem and bodycombination length.Depth, in. (mm)C-PH-406A DIMSWAGELOK QUICK CONNECTS- MS-01-138Insertion ber-QM2-B-1PF-QM2-B-2PFSeriesDimensions, in. (mm)QM2A1.42 (36.1)1.44 (36.6)SESODESO0.47 (11.9)0.53 (13.5)F7/16Dimensions, in. (mm)QM2A1.43 (36.3)1.62 (41.1)F7/169/16Full-Flow Quick-ConnectsA full-flow QM series quick-connectconsists of a SESO stem and a full-flowbody.To order a SESO stem, select a basicordering number and add a materialdesignator.AF flatExample: SS-QM2-S-200To order a full-flow body, select a basicordering number and add a materialdesignator and MB.Swagelok BulkheadTube FittingExample: iesAF1/8-QM2-B1-200QM22.09 (53.1)7/16Dimensions, in. (mm)Dimensions shown with Swagelok tube fitting nuts finger-tight.Maximum panel thickness is 0.25 in. (6.4 mm); minimum panelhole diameter is 21/64 in. (8.3 mm).
Quick-Connects—QC, QF, QM, and QTM Series15PTFE-Sealed Quick-ConnectsQTM SeriesSlideFeaturesSlide hook Product qualification tests are basedBody valve sealon ANSI B93.51M.DESO valve seal Flush valve design reduces airinclusion and spillage. Locking dog mechanism with largecontact area retains stem. Seals are recessed for protection. Keyed option is available. Push-to-connect design enablesquick, simple operation.Packing sealQUICKCONNECTSStem sealLocking dogsAdapter seallownal f iorectBidi Pressure-Temperature RatingsMaterials of ConstructionPressure ratings may be limited by end connections.MaterialComponent316 SSAlloy 400BodyXylan-coated316 SSXylan-coatedalloy 400Slide, stem, stemadapter, body valve,DESO valve, packinggland, body bolt,body valve seal cap,DESO valve seal cap,DESO stem fins316 SSEyelet, body insert,DESO valve post316 SS—Snap rings316 SSAlloy X-750Body fin(QTM4 only)PTFE-coatedpowdered metal300 series SS—Front ferrule(QTM4 only)316 SS—Springs316 SS andElgiloy Alloy X-750 andElgiloy316 SSAlloy 400Temperature F ( C)QTM2QTM4QTM8QTM20 to 120450032003200(–17 to 48)(310)(220)(220)Pressure Rating, psig (bar)CoupledAlloy 400UncoupledPacking seal, stemseal, adapter sealDyneon TFM 1600Body valve seal,DESO valve sealPacking backup ring10001000(68.9)(68.9)When Coupling And Uncoupling70 (20)250 (17.2)at 70 F (20 C)SESO and Full Flow BodySeriesWater FlowU.S. gal/min(L/min)15 (56)Virgin PTFEQTM435 (130)Filled PTFEQTM850 (180)316 SS or CF8MM-35-1Rear sleeve,front sleeve,slide hooks316 SSAlloy 100 (6.8)Maximum Flow RateQTM2Locking dogsWetted components listed in italics.0 to 120(–17 to 48)Spillage and Air Inclusionat 70 F (20 C)Standard DESO and Bo
Locking dog mechanism with large contact area retains stem. Push-to-connect coupling enables quick, easy operation. Wide variety of options, including keyed quick-connects, are available. Heavy-duty sleeve shields open end of body. Instrumentation Quick-Connects QC Series
LOGIQ e GE Healthcare. 2 LOGIQ e Quick Card The Quick Card is a quick reference to operation. Please refer to Basic User Manual for detailed information. Control Panel 1 15 14 6 7 13 12 5 11 4 10 3 9 2 8. LOGIQ e Quick Card 3 The Quick Card is a quick reference to operation. Please refer to Basic User Manual for detailed information.
LOGIQ e Quick Card 10 11 LOGIQ e Quick Card The Quick Card is a quick reference and not does not replace the User Manual. Please refer to the Basic User Manual for complete safety and operation information. The Quick Card is a quick reference and not does not replace the User Manual. Please refer to the Basic User Manual for complete safety
1.4 Fonts Font sizes Point size Latex cmd User-de ned * Sample 5 6 \tiny \xxxsmall the quick brown fox 7 8 \scriptsize \xxsmall the quick brown fox 8 10 \footnotesize \xsmall the quick brown fox 9 11 \small \small the quick brown fox 10 12 \normal \normal the quick brown fox
Quick-Build Warehouse SBH2600, height 2.6m 6 Quick-Build Warehouse SBH3000, height 3.0m 8 Quick-Build Warehouse SBH4000, height 4.0m 10 Quick-Build Warehouse SBH4800, height 4.8m 12 Useful accessories 14 Your individual Quick-Build Warehouse
6 About Your Dell E-Port Plus VGA VIDEO CONNECTOR— Connects an external monitor. SERIAL CONNECTOR— Connects serial devices, such as a mouse or handheld device. PS/2 CONNECTORS (2) —Connects PS/2-compatible mouse and keyboard to the E-Port Plus. Shut down
EPIC and Home Energy Assistance Program (HEAP) IT-214 Form/ Property Tax Reduction . NY Connects of Onondaga County 315-435-1400 Revised August 2021 10 Senior Dining Sites. NY Connects of Onondaga County 315-435-1400 Revised August 2021
back: Right satellite connects to black RCA output and left satellite connects to grey RCA output. Do not use the white and red audio inputs. – Audio source connects to the control pod or subwoofer back using the 3.5
Senior Jazz Combo Wild and unpredictable band of senior musicians in years 10 to 13 for whom anything goes! (Grade 5 with a focus on improvisation). Senior Vocal Group Run by 6th form students for 6th form students, this is an acappella group of mixed voices with high standards of singing. St Bartholomew’s School Orchestra (SBSO) All instrumentalists are expected to perform in the school .
