CATALOGUE 1-2 DRIVE CHAIN ATTACHMENT CHAIN
DRIVE CHAINATTACHMENT CHAINCATALOGUE 1-2 2015
CATALOGUE 1-2 DRIVE CHAINClassificationChain SeriesGeneralStandard Roller Chain SeriesLAMBDA SeriesLube-FreeX-LAMBDA SeriesHeavy Duty SeriesHeavy DutySUPER SeriesNP SeriesCarbon SteelBaseAnti CorrosionCorrosionProtectedTsubaki Chain TypeFeaturesBS GT4 WinnerSuperior Performance Chain inANSI G7both BS/DIN and ANSIBS LAMBDASelf Lube Chain;ANSI LAMBDAMaintenance FreeBS X-LAMBDASelf Lube under Severe Dust ConditionsANSI HHigher Fatigue StrengthANSI HTAnti-Shock PerformanceANSI SUPERBetter Fatigue StrengthANSI SUPER-HBetter Fatigue Strength and Anti-Shock PerformanceANSI ULTRA SUPERUltimate StrengthBS (LAMBDA) NPANSI (LAMBDA) NPShining Nickel Plated PartsBS N.E.P.N.E.P. SeriesBS LAMBDA N.E.P.ANSI N.E.P.Environmental Friendly Corrosion ProtectionANSI LAMBDA N.E.P.SS SeriesCorrosionResistantStainlessSteelBaseAS SeriesPC SeriesSpecialty ChainLeaf Chain SeriesLow Noise SeriesBS SSStainless Steel SUS304ANSI SSExcellent Corrosion ResistantANSI ASHigher Maximum Allowable LoadBS PCSUS304 Engineering Plastic Inner Link;ANSI PCLube FreeANSI ALANSI BLANSI SNSIdeally Suited for Lifting ApplicationsUnique Spring Roller for Noise Reduction
Chain SeriesTsubaki Chain TypeAll Major Chain Attachments AvailableBS Single Pitch RFStraight Side Plate for Direct ConveyingANSI Single Pitch StandardAll Major Chain Attachments AvailableANSI Single Pitch HPHollow Pin ChainANSI Single Pitch CUCurved Chain (Side Bow Chain)ANSI Double Pitch StandardFor Longer Conveyor LinesANSI Double Pitch HPHollow Pin ChainBS Single Pitch LAMBDASelf Lube, Maintenance FreeBS Single Pitch LAMBDA RFSelf Lube, Maintenance FreeANSI Single Pitch LAMBDASelf Lube, Maintenance FreeANSI Single Pitch LAMBDA HPSelf Lube, Hollow Pin ChainANSI Double Pitch LAMBDASelf Lube, Maintenance FreeBS Single Pitch N.E.P.Environmental Friendly Corrosion ProtectionBS Single Pitch SSStainless Steel SUS304ANSI Single Pitch SSStainless Steel SUS304ANSI Single Pitch SS HPSUS304, Hollow PinANSI Double Pitch SSSUS304, Double PitchANSI Double Pitch SS HPSUS304, Double Pitch, Hollow PinPC AttachmentChain SeriesBS Single Pitch PCSUS304 Engineering Plastic Inner LinkANSI Single Pitch PCSUS304 Engineering Plastic Inner LinkP Attachment Chain SeriesANSI Single Pitch PEngineering Plastic Block SUS304 PinsGeneralANSI Standard AttachmentChain SeriesBS LAMBDA AttachmentChain SeriesLube-FreeANSI LAMBDA AttachmentChain SeriesCorrosionProtectedCarbonSteel BaseStainlessSteel BaseCorrosionResistantPlastic BaseClassificationN.E.P. Attachment ChainSeriesSS AttachmentChain SeriesTsubaki Chain TypeChain SeriesLube-Free SeriesCATALOGUE 3 CUSTOM MADE CHAINANSI Drive ChainCorrosion Resistant SeriesCold Resistant SeriesSelf Lube, Increased Tensile StrengthANSI X-LAMBDASelf Lube under Severe Dust ConditionsLube-FreeSeriesAll TitaniumSuperior Chemical ResistanceANSI NSUltimate Corrosion Protection, Heat ApplicationANSI KTLow Temperature Freezing Application down to -60 CSelf Lube ChainANSI Single Pitch LAMBDA CUCurved ChainANSI Double Pitch LAMBDASelf Lube ChainSpecialEnvironmentsANSI Double Pitch LAMBDA CKFStandard SeriesTsubaki StandardLow Maintenance SeriesHigh Temperature up to 230 CFood GradeHigh Temperature up to 230 CFood GradeANSI Single Pitch SSSUS304, Excellent Corrosion ResistantANSI Single Pitch SS CUSUS304, Curved ChainANSI Double Pitch SSSUS304, Excellent Corrosion ResistantRFWide VariationRF LAMBDASelf Lube, Direct ConveyingBR Bearing RollerLow Friction of Roller, Save EnergyDeep Link SeriesRFDIdeal for Direct ConveyingFree Flow SeriesVR Double PlusChain Speed can be Reduced 2,5 Times, Save EnergyStandard SeriesConveyor ChainFlexible Design CapabilityANSI Single Pitch LAMBDAANSI Single Pitch LAMBDA CKFCorrosion Resistant SeriesFood GradeANSI PC-SYANSI Double Pitch StandardStandardHigh Temperature up to 230 CANSI TIANSI Single Pitch StandardStandard SeriesFeaturesANSI LAMBDA Heavy DutyANSI LAMBDA DKFANSI Attachment ChainFeaturesBS Single Pitch StandardBS Standard AttachmentChain SeriesAnti CorrosionCATALOGUE 1-2 ATTACHMENT CHAINClassificationHollow Pin SeriesDIN StandardDeep Link SeriesScraper SeriesMFVMCFVCMTFVTTFMTFWide VariationHollow PinIdeal for Direct ConveyingScraping Attachments
LEADING PRODUCTS AND EXCELLENT SERVICEAt TSUBAKI we know that customers want the best. We are also aware that each andevery one of our customers has unique requirements. Therefore, we take pride in ourability to deliver an extensive product line-up that satisfies these high expectations.We believe that in coming years there will be an increase in demand for quality inproducts as well as in services. With an eye on these future trends, we are committedto take on the challenge of technical innovation.Our main products, along with automotive timing-drive systems,are industrial drive chains, attachment chains and large sizeconveyor chains. Related products such as cam clutches, sprockets, shaft couplings, safety devices, toothed belts & pulleyscompliment the program. In the new and modern workshop inDordrecht, standard attachment chains can be assembled asready-to-use items, thus saving customers time and achievinghighest quality. In case of special needs it is possible to manu facture chains completely to order.For optimum performance and reliability, a chain has to be selectedcarefully. In respect of this customers can rely on our specialisedsales people and our experienced field engineers for technicaladvice (including maintenance and chain inspection on site). Toensure a close customer contact and excellent service an extensive network of distribution points is strategically placed throughout Europe and other designated markets.Tsubakimoto Europe B.V. serves the Pan-European market, Africaand the Middle East. Our headquarters are located in Dordrecht,the Netherlands, serving Power Transmission customers. Fromthe subsidiary office in Nottingham, Tsubaki UK serves the UnitedKingdom, Ireland and Iceland and from the office in Gilching,Germany customers in Germany, Austria and Switzerland areserved. The TSUBAKI Group includes 46 production locationsand 63 group companies worldwide. Our production and salesnetworks are now more developed than ever.3
TABLE OF CONTENTSIntroduction to TSUBAKI Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8- Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8- Roller Chain Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10BS LAMBDA Lube Free Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12- BS LAMBDA Lube Free Roller Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13BS X-LAMBDA Lube Free Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14- BS X-LAMBDA Lube Free Roller Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15RS Roller Chain GT4 Winner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16- BS GT4 Winner - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17BS Chain for Corrosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18- BS PC Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19- BS SS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20- BS LAMBDA N.E.P. Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21- BS N.E.P. Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22- BS NP Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23ANSI LAMBDA Lube Free Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24- ANSI LAMBDA Lube Free Roller Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25ANSI G7 Standard Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26- ANSI G7 Standard Roller Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27ANSI Chain for Corrosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28- ANSI PC Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29- ANSI SS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30- ANSI AS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314
TABLE OF CONTENTS- ANSI LAMBDA N.E.P. Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32- ANSI N.E.P. Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33- ANSI NP Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34ANSI Heavy Duty Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35- H Series - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36- HT Series - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37- SUPER Series - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38- SUPER-H Series - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39- ULTRA SUPER Series - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ANSI Low Noise Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41- ANSI SNS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42ANSI Leaf Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43- AL Type - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44- BL Type - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45TSUBAKI Drive Chain Application Check Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Note:Chains which are included in this catalogue are available from stock, with the exception of the chains of which the Tsubaki chain number is indicatedwith gray characters.5
TABLE OF CONTENTSIntroduction to TSUBAKI Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47- Attachment Chain Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47- Chain Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51- Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51- Chain Length Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53- Match & Tag Service: High Accuracy, Narrow Tolerance Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53- Local Assembly Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54BS LAMBDA Lube Free Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55- BS Single Pitch LAMBDA Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56- BS Single Pitch LAMBDA RF Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57BS Standard Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58- BS Single Pitch Standard Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59- BS Single Pitch RF Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60BS Attachment Chain for Corrosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61- BS Single Pitch PC Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62- BS Single Pitch SS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63- BS Single Pitch N.E.P. Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64ANSI LAMBDA Lube Free Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65- ANSI Single Pitch LAMBDA Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66- ANSI Single Pitch LAMBDA Hollow Pin (HP) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . 67- ANSI Double Pitch LAMBDA Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68ANSI Standard Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69- ANSI Single Pitch Standard Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70- ANSI Single Pitch Hollow Pin (HP) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 716
TABLE OF CONTENTS- ANSI Single Pitch Curved (CU) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72- ANSI Double Pitch Standard Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73- ANSI Double Pitch Hollow Pin (HP) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74ANSI Attachment Chain for Corrosive Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75- ANSI Single Pitch P Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76- ANSI Single Pitch PC Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77- ANSI Single Pitch SS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78- ANSI Single Pitch SS Hollow Pin (HP) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 79- ANSI Double Pitch SS Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80- ANSI Double Pitch SS Hollow Pin (HP) Chain - Drawings and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 81Stock Specialty Attachment Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82TSUBAKI Attachment Chain Application Check Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83TSUBAKI Attachment Chain Layout Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Temperature Selection Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Corrosion Resistance Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86General Terms and Conditions of Sale Tsubakimoto Europe B.V. . . . . . . . . . . . . . . . . . . . . . . . . . . . 88For Safe Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89Note:Chains which are included in this catalogue are available from stock, with the exception of the chains of which the Tsubaki chain number is indicatedwith gray characters.7
INTRODUCTION TO TSUBAKI ROLLER CHAIN3.Average Tensile Strength as perTSUBAKI StandardisationThis is a fracture load reading obtained after a long period ofactual tensile strength testing of a large number of chain strands.Of course, when any given strand of roller chain fractures, thisvalue may be higher or lower, so it does not represent a guaranteed value.ISO min. Tensile StrengthTSUBAKI min. Tensile StrengthFrequencyTSUBAKI av. Tensile StrengthPmMinimum Tensile Strength as perTSUBAKI StandardisationThis is a minimum value determined by statistical processes atTSUBAKI. If a roller chain fractures at a tensile load below thisvalue, it does not surpass TSUBAKI standards. TSUBAKI standardsare higher than ISO standards.Pa2.PmaxMinimum Tensile Strength as perISO Standar disationThis is the Minimum Tensile Strength determined by ISO. If a rollerchain fails a tensile load below this value, it does not surpass thestandards.Pmin1.5. Maximum Allowable LoadThe Maximum Allowable Load (M.A.L.) of a roller chain (excludingStainless Steel Chain and Engineering Plastic Chain) is the valuederived from the lowest fatigue limit. When a load lower than thisvalue is repetitively applied to the roller chain, fatigue failure willnever occur.The TSUBAKI M.A.L. is determined after 10 million repetitiveloads instead of 3 million repetitive loads which is the EuropeanStandard.The Maximum Allowable Load of Stainless Steel Chain andEngineering Plastic Chain is determined by the surface pressurebetween the pins and bushes.LoadGlossaryTimeFig. 4 Summary chart for repetitive loads6. Ring Coining ProcessFor easy assembling the pin and link plate of a connecting linkare slip fit. In general, this type of connecting link has a 20% lowerfatigue strength than the chain itself. However, TSUBAKI developeda special process to eliminate that loss of fatigue strength and stillsatisfy the customers demand for easy assembling: the Ring Coining process. By applying the Ring Coining process, TSUBAKIgenerates a cold deformation around the pin hole of the connecting link plate. This results in residual stress around the pinhole and thereby adds strength. By using this process, transmission capacity is increased back to 100%.Tensile StrengthFig. 1 Relationship between the three tensile strengths mentionedabove.4. Tensile Strength Testing MethodAs shown in Fig. 2, a roller chain with minimum of five links isfixed at both ends by clevises and tensioned until fracture occurs.The type of fracture can be used to determine the cause of thebreakage of the chain (Fig. 3).Fig. 5 Ring CoinFor severe conditions, TSUBAKI has developed the Heavy DutyChain seri
BS PC SUS304 Engineering Plastic Inner Link; ANSI PC Lube Free Specialty Chain Leaf Chain Series ANSI AL Ideally Suited for Lifting Applications ANSI BL Low Noise Series ANSI SNS Unique Spring Roller for Noise Reduction. CATALOGUE 1-2 DRIVE CHAIN CATALOGUE 3 CUSTOM MADE CHAIN
BS PC SUS304 Engineering Plastic Inner Link; ANSI PC Corrosion Protected and Lube Free Specialty Chain Leaf Chain Series ANSI AL Ideally Suited for Lifting Applications ANSI BL Low Noise Series ANSI SNS Unique Spring Roller for Noise Reduction Catalogue 1 CATALOGUE 3 CUSTOM MADE CHAIN
#2 –Chain tensioner and guide rail #3 –Slide rail #4 –Sprocket #5 –Chain tensioner with seal Part Number Description Quantity 11 41 7 605 366 Chain Drive 1 11 31 8 648 732 Timing chain 1 11 31 7 592 877 Chain tensioner and guide rail 1 11 31 7 603 944 Sprocket 1 TIS Service Bulletin Page 4 of 7
Circular Chain (Curved Chain) 63 Double Pitch Conveyor Chain C2040 to C2160H C2042 to C2162H 64 ANSI Roller Chain with Attachment 25 to 160 65 Double Pitch Roller Chain with Attachment 66 ANSI Roller Chain with Extend Pin 35 to 120 67 Double Pitch Roller Chain with Extend Pin C2040 to C2102H 68 ANSI Roller Chain with Wide Contour Attachment 69 D
DEFINITION. The bi-chain condition holds in L if every bi-chain of CX terminates. We note that the bi-chain condition is self-dual. Moreover, f[An,in-)pn} is a bi-chain ofdl, Im (in) is a descending chain and Ker(pn) is an ascending chain. Hence the bi-chain condition holds in L if the ascending and descending chain conditions both hold.
chain tension design is important in order to minimize disc, chain and pipe wear. In addition, the chain return line is kept continuously in slight . DRAG LINK-CHAIN CONVEYOR Fig.2 . 3 Chain speed is adjustable using a variable frequency drive with a range of 4 feet per minute up to 88 FPM. The variation in chain speed enables
u.s. tsubaki engineering chain division engineering class chains contents page drive chains a-1 a-16 introduction a-1 a-2 drive chain specifications a-3 a-4 drive chain selection guidelines a-5 a-16 roller conveyor chains a-17 a-52 introduction a-17 a-18 roller conveyor chain specifications a-19 a-20
CHAIN & KITS FOR CASE IH COMBINES PART NO. DESCRIPTION APPLICATION 84207190 Complete Feeder Chain – 557 Chain; 54.5"Feeder with Serrated Slats 2377/2388/2577/2588/ 5088/6088/7088/5130/ 6130/7130 1989520C1 557 Chain – Outer Chain (2) Required 1989519C1 557 Chain – Center Chain (1)
K-5 ELA Missouri Learning Standards: Grade-Level Expectations Missouri Department of Elementary and Secondary Education Spring 2016 . Reading 2 1 Develop and apply skills to the reading process. Grade K Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 A With assistance, develop and demonstrate reading skills in response to read-alouds by: a. predicting what might happen next in a text based on the .
