GP1234 Airless Sprayer
GP1234 Airless sprayerPressure conversion ratio: 34: 1No-load displacement(L/min): 5.6Inlet pressure(MPa): 0.3-0.6Air consumption(L/min): 180-2000Cylinder diameter(mm): Ф125Dimensions(mm)width height high: 480 480 800Weight(kg): 39Note: The no-load displacement is the displacement pressure of the coating underGP1234 high pressure airless coating equipmentScope：Can be spray encaustic tile, furniture, steel structure, ships, constructs theinside and outside wall latex paint, tannery spray coating glue water, each kind ofcoating and paint pressured air as the power, steady and reliable, malfunction ratio isextremely low.Pressure pulsation is small, the coating layer is even, the coating quality is better.The route is long, the exhaust is big, the frequency of switching direction is low, hard tobe damaged by friction, the life of the machine and the maintenance cycle extends.Use new type silencing device.It is a type of small car, the structure is close, the movement is convenient.
TALENCO DVB-3091Portable Dust Free Blast Machine is a light-weight , portable abrasive blastingtools with an integral abrasive recovery system. During Blasting , abrasive iscontinually recycled , while dust and other debris are collected in a slip-on dust bagInterchange adapter boots for level surfaces , corners, etc. fit over the swivel blasthead to assure efficient recovery on any surfaceFeatureLightweightMachine weight only 7 lbs (3 kg) plus up to 4 lbs (2 kg) abrasive charge.CompactSmall enough for being used in the “hard-to-get-at areas”.FlexibleSwivel head – use at any angle.Time savingAlways ready for action – simply couple 3/4″ (19 mm) air line and startblast cleaning.Recycles abrasiveRe-usable abrasives, i.e. steel shot and grit, chilled iron, aluminumoxide, silicon carbides, glass beads, etc. can be used.(40 100Mesh is advised).Double action leverNo dismantling to recharge empty abrasive container. First pressurepicks up new abrasive charge or vacuums the work surface. Secondpressure starts blast cleaning/recycling operation.Air pressure only – no other form of power supply neededRequires 33-60 CFM at 9-100 lbs P.S.l.Blast pattern approximately 1 1/4 (32 mm) wide.
TALENCO DVB-3091
TLS-395 Airless sprayerThe TLS-395 is a solid unit built for the professional just “starting out.”Light-weight and portable – at 20 kg it's easy to lift and carry.The TLS-395 is the ideal sprayer for residential jobs, and is the best value in small electric sprayers.Standard supplied including 10 meter airless hose, spray gun and nozzle (ready for use)Now also available in 110 volt
TLS-595 Airless sprayerThe TLS-595 Pro is a workhorse. It's proven to be a hit with contractors who are looking for higher outputand professional features in a compact and portable sprayerStandard supplied including 10 meter airless hose, spray gun and nozzle (ready for use)
TLS-795 Airless sprayerWith a powerful 2800 watt motor, the TLS-795 Pro can handle multiple guns and is ideal for theprofessional residential remodeling and repainting contractor who sprays a wide variety of coatingsStandard supplied including 10 meter airless hose, spray gun and nozzle (ready for use)
GP1234 high pressure airless coating equipment Scope：Can be spray encaustic tile, furniture, steel structure, ships, constructs the inside and outside wall latex paint, tannery spray coating glue water, each kind of coating and paint pressured air as the power, steady and reliable, malfunction ratio is
sprayer. Setting up the Airless Sprayer to Paint After inspection, prime the fluid section of the sprayer. Airless sprayers will have a prime and spray setting or a valve that can be opened to initiate prime and closed to initiate spraying. To prepare the airless sprayer ready for painting, to place the pickup tube in the material to be sprayed and
Basic Mechanical 1. Pump frozen or hardened paint Thaw sprayer if water or water-based paint has frozen in sprayer. Place sprayer in warm area to thaw. Do not start sprayer until thawed com-pletely. If paint hardened (dried) in sprayer, replace pump packings. See page 11, Dis-placement Pump Replacement. 2. Displacement pump connecting rod pin.
the longest lasting airless pumps and accessories on the market. T4 Airless Sprayer Precision Motor Control. PMC Balanced fluid manifold No pulsation delivery of paint at any pressure setting No cylinder to wear out. Lightweight, easy to carry Professional Airless Sprayer All metal construction.
The Graco e-Xtreme Electric Airless Sprayer is the world’s first electric sprayer for protective coatings approved for hazardous locations. The e-Xtreme sprayer operates on a more reliable, convenient and
GM 5000 Airless Paint Sprayer 3000 psi (210 bar) Maximum Working Pressure Sprayers with Upright Carts Model 220–886, Series C Basic sprayer, without hose or gun Model 231–052 Complete sprayer, with hose and Contractor gun, RAC IV DripLess Tip Guard, and 517 size Swi
ULTRA@ 1000 AIRLESS PAINT SPRAYER Z" psi (207 bar) MAXIMUM WORKING PRESSURE Model 231-034. Series A Basic sprayer, without hose or gun Model 231-043 Complete sprayer with hose, gun, RAP IV DripLessTM Tip Guard and SwitchTipTM. Model 220-411 Same as 231-043 except sprayer is CSA certified. -. INDEX
ELECTRIC-HYDRAULIC AIRLESS PAINT SPRAYER EH 433 GT HYDRA–SPRAY 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Provides 1 gpm at 1000 psi (70 bar) Model 231–004, Series A, 60 Hz, 120 VAC Basic sprayer on upright cart without hose or gun Model 226–433 Complete sprayer with hose, Silver Plus gun, RAC IV DripLess Tip Guard and SwitchTip
PLAYING FIELD, INTRODUCTION OF LAND DRAINAGE SYSTEM, FENCING, LANDSCAPE PLANTING AND INTRODUCTION OF NEW VEHICULAR ACCESS FOR MAINTENANCE AND EMERGENCY PURPOSES Report by the Director of Environment & Economy (Growth & Infrastructure) Location: Field to the north of Aston Rowant C of E Primary School, School Lane, Aston Rowant, Watlington, Oxfordshire, OX49 5SU Application No: R3.0056/11 .
