OWNER’S MANUAL IPS LED MONITOR (LED LCD MONITOR)
ENGLISHOWNER’S MANUALIPS LED MONITOR(LED LCD MONITOR)Please read this manual carefully before operatingyour set and retain it for future reference.IPS LED(LED LCD) MONITOR MODEL22BK55WD24BK55WD22BK55WY24BK55WYwww.lg.com
2TABLE OF CONTENTSCONTENTSENGLISHENG3ASSEMBLING AND PREPARING23TROUBLESHOOTING3Unpacking4Parts and buttons25SPECIFICATIONS6Setting up the Monitor set2522BK55WY6- Attaching the Stand Base2622BK55WD6- Detaching the stand base2724BK55WY7- Detaching the stand body2824BK55WD7- Using the cable holder29Preset Modes (Resolution)7- Mounting on a table30Indicator8- Adjusting the angle9- Adjusting the stand height9- Using the Kensington locking device31PROPER POSTURE10- Swivel stand31Proper posture for using the Monitor set.10- Using the Pivot function11- Mounting on a wall12USING THE MONITOR SET12Connecting to a PC12- D-SUB connection12- DVI-D connection14- Peripheral device connection15CUSTOMIZING SETTINGS16Customizing Settings16- Menu Settings17- Picture18- Color19- Display19- Audio20- Others21- READER Setting22- SMART ENERGY SAVING Setting
ASSEMBLING AND PREPARING3ASSEMBLING AND PREPARINGCheck your product box for the following items. If there are any missing accessories, contact the localdealer where you purchased your product. The illustrations in this manual may differ from the actual productand accessories.CD(Owner's Manual) /CardPower CordAudio Cable( Depending on the country )DVI-D CableD-SUB Cable(This cable is not included in all (This cable is not included in allcountries.)countries.)Stand BaseOne ScrewCable HolderDisplay Port CableUSB Cable( Depending on the country )(This cable is not includedin all countries.)22BK55WY 24BK55WY22BK55WY 24BK55WYCAUTIONDo not use any unapproved accessories to ensure the safety and product life span.yyAny damages or injuries by using unapproved accessories are not covered by the warranty.yyNOTEThe accessories supplied with your product may vary depending on the model.yyProduct specifications or contents in this manual may be changed without prior notice due to upgradeyyof product functions.ENGENGLISHUnpacking
4ASSEMBLING AND PREPARINGParts and buttonsENGLISHENG22BK55WY24BK55WYPower IndicatoryyLED On : Power is onyyLED Off: Power is off(Power Button)Front Side ButtonsInput Connectors ( See p. to 14 )
ASSEMBLING AND PREPARING5ENGENGLISH22BK55WD24BK55WDPower IndicatoryyLED On : Power is onyyLED Off: Power is off(Power Button)Front Side ButtonsInput Connectors ( See p. to 14 )
6ASSEMBLING AND PREPARINGENGLISHENGSetting up the Monitor setDetaching the stand baseAttaching the Stand Base1 Place the monitor's screen face down.1 Place the Monitor set with the screen sideTo protect the screen from scratches, cover thesurface with a soft cloth.down on a flat and cushioned surface.CAUTIONTo protect the screen from scratches, coveryythe surface with a soft cloth.2 Using a coin, turn the screw in the stand basecounterclockwise. Detach the stand base fromthe stand body.2 Check the position (at the front and rear) ofStand Bodythe stand body, then mount the stand base onthe stand body as shown in the figure.Stand BodyStand BaseStand Base3 Using a coin, turn the screw clockwise to secure the stand base.Stand BaseCAUTIONThe components appearing in the illustrayytions may look different from the actual product.Do not carry the monitor upside-down as thisyymay cause it to fall off its stand, resulting indamage or injury.To avoid damaging the screen when liftingyyor moving the monitor, only hold the stand orthe plastic cover. This avoids putting unnecessary pressure on the screen.Only remove the tape and the locking pinyywhen the monitor is mounted on the standbase and is in an upright position. Otherwise,the stand body may protrude, which maylead to injury.
ASSEMBLING AND PREPARINGDetaching the stand bodyprotect the screen from scratches, cover thesurface with a soft cloth.NOTEThe holes are used for wall mount bracket.yyVaries depending upon your country oryymodel.2 Using a screwdriver, remove the four screwsand detach the stand from the monitor.Mounting on a table1 Lift the monitor and place it on the table in anupright position.Using the cable holder123Install at least 100 mm away from the wall toensure sufficient ventilation.Fix the Knob (Cable holder) to theHole(Hingebody).Use one screw to fix the Cable Holder andmonitor set.Close the Cable holder.100 mm100 mm100 mm100 mmENGENGLISH1 Place the monitor's screen face down. To7
8ASSEMBLING AND PREPARING21ENGLISHENG2Connect the Power cord to the monitor, thenplug the power cord into the wall outlet.(Before connect please check the “ON/OFF”knob in “O” state).Press the “ON/OFF” knob in “ ” state(Open the power).WARNINGTo avoid injury to the fingers when adjustingyythe screen, do not hold the lower part of themonitor's frame as illustrated below.Be careful not to touch or press the screenyyarea when adjusting the angle of the monitor.3 Press the(Power) button on the front of themonitor to turn on the monitor.CAUTIONUnplug the power cord prior to moving oryyinstalling the monitor. There is risk of electricshock.Adjusting the angle1 Place the monitor mounted on the stand basein an upright position.2 Adjust the angle of the screen. The angle ofthe screen can be adjusted up to 5 forwardsand 35 backwards for a comfortable viewingexperience.Rear SideFront Side
ASSEMBLING AND PREPARINGAdjusting the stand height9CAUTIONin an upright position.Once the pin is removed, it is not necessaryyyto re-insert it to adjust the height.2 Remove the tape attached at the bottom rearof the stand body, then pull out the lockingpin.WARNINGDo not put your finger beyytween the screen and thebase (chassis) when adjusting the screen's height.Stand Body TapeLocking PinUsing the Kensington lockingdeviceThe connector for the Kensington lock is locatedon the rear of the monitor.For more information on installation and usage,refer to the Kensington lock user manual or visitthe website at http://www.kensington.com.Connect the monitor to the table with the Kensington lock cable.3 The height can be adjusted up to 130 mm.130.0mmNOTEUsing the Kensington lock is optional. Theyyaccessories can be purchased at your localelectronics store.ENGENGLISH1 Place the monitor mounted on the stand base
10ASSEMBLING AND PREPARINGSwivel standENGLISHENGImage shown may differ from your Monitoryyset.1 Swivel 355 degrees and adjust the angle of theMonitor set to suit your view.Using the Pivot functionThe pivot function allows you to rotate the screen90 degrees clockwise.1 Lift the monitor to its highest height to utilizethe Pivot function.2 Landscape & Portrait : You can rotate the panel90 clockwise. Please be cautious and avoidcontact between the monitor head and theStand Base when rotating the screen to accessthe Pivot function. If the monitor head touchesthe Stand Base, then the Stand Base couldcrack.HeadsectionStandsection3 Be careful with the cables when rotating thescreen.
ASSEMBLING AND PREPARINGModel22BK55WDMounting on a wall22BK55WY100 mm100 mm100 mm100 mm24BK55WD24BK55WY200 x 100M44CAUTIONDisconnect the power cord first, and thenyymove or install the Monitor set. Otherwiseelectric shock may occur.If you install the Monitor set on a ceiling oryyslanted wall, it may fall and result in severeinjury.Use only an authorized LG wall mountyyand contact the local dealer or qualifiedpersonnel.Do not over tighten the screws as this mayyycause damage to the Monitor set and voidyour warranty.Use only screws and wall mounts thatyymeet the VESA standard. Any damagesor injuries by misuse or using an improperaccessory are not covered by the warranty.Screw length from outer surface of backyycover should be under 8mm.If you intend to mount the Monitor set to a wall,attach Wall mounting interface (optional parts) tothe back of the set.When you install the Monitor set using a wallmounting interface (optional parts), attach itcarefully so it will not drop.1 Please, Use the screw and wall mount interfacein accordance with VESA Standards.Wall mount Pad2 If you use screw longer than standard, theStandard screwBack CoverWall mount PadBack Covermonitor might be damaged internally.3 If you use improper screw, the product might bedamaged and drop from mounted position. Inthis case, LG Electronics is not responsible forit.4 VESA compatible only with respect to screwmounting interface dimensions and mountingscrew specifications.5 Please use VESA standard as below.784.8 mm (30.9 inch) and underyy* Wall Mount Pad Thickness : 2.6 mm* Screw : Φ 4.0 mm x Pitch 0.7 mm xLength 10 mm787.4 mm (31.0 inch) and aboveyy* Please use VESA standard wall mount padand screws.Max.8mmNOTEUse the screws that are listed on the VESAyystandard screw specifications.The wall mount kit will include an installationyymanual and necessary parts.The wall mount bracket is optional. You canyyobtain additional accessories from your localdealer.The length of screws may differ dependingyyon the wall mount. Be sure to use the properlength.For more information, refer to theyyinstructions supplied with the wall mount.ENGENGLISHFor proper ventilation, allow a clearance of 100mm on each side and from the wall. Detailedinstructions are available from your dealer, see theoptional Tilt Wall Mounting Bracket Installation andSetup Guide.VESA (A x B)100 x 100Standard screwM4Number of screws 411
12USING THE MONITOR SETUSING THE MONITOR SETENGLISHENGConnecting to a PCYour Monitor set supports Plug & Play*.yy*Plug & Play: A PC recognizes a connecteddevice that users connect to a PC and turnon, without device configuration or userintervention.D-SUB connectionTransmits analog video from your PC to theMonitor set. Connect the PC and the Monitor setwith the supplied D-sub 15 pin signal cable asshown in the following illustrations.NOTEWhen using a D-Sub signal input cableyyconnector for MacintoshMac adapteryyFor Apple Macintosh use, a separate plugadapter is needed to change the 15 pinhigh density (3 row) D-SUB VGA connectoron the supplied cable to a 15 pin 2 rowconnector.DVI-D connectionTransmits a digital video signal from your PC tothe Monitor set. Connect the PC and the Monitorset with a DVI cable as shown in the followingillustrations.
USING THE MONITOR SETNOTESelf Image Setting FunctionPress the power button on the bottom panel toturn the power on. When monitor power is turnedon, the "Self Image Setting" Function is executedautomatically. (Only supported in Analog Mode)CAUTIONConnect the signalyyinput cable and tightenit by turning the screwsclockwise.Do not press the screenyywith your finger for a long time as this mayresult in temporary distortion on the screen.Avoid displaying a fixed image on theyyscreen for a long period of time to preventimage burn. Use a screensaver if possible.NOTE"Self Image Setting" Function.yyThis function provides the user with optimaldisplay settings.When the user connectsthe monitor for the first time, this functionautomatically adjusts the display to optimalsettings for individual input signals.(Onlysupported in Analog Mode)‘AUTO’ Function.yyWhen you encounter problems such asblurry screen, blurred letters, screen flickeror tilted screen while using the device orafter changing screen resolution, press theAUTO function button to improve resolution.(Only supported in Analog Mode)ENGENGLISHIf you use DP, it can cause compatibilityyyproblem.When you want to use two PC in our Monitor,yyplease connect the signal cable(D-SUB/DVI-D/DP) respectively in Monitor set.If you turn the Monitor set on while it is cold,yythe screen may flicker. This is normal.Some red, green, or blue spots may appearyyon the screen. This is normal.13
14USING THE MONITOR SET22BK55WY 24BK55WYENGLISHENGPeripheral device connectionConnect peripheral devices to the monitor.Two USB Downstream portsConnect these ports to a mouse,USB keyboard, memory stick withcurrent spec under 100mA.One USB Upstream portConnect this port to the downstream port of a computer, laptopor USB monitor (Your computeror USB monitor must supportUSB and have USB ports).(Not Provided)NOTEThe monitor's USB terminal supports USByy2.0 and high speed cables.DP Display PortyyThe cable is Separate purchase.NOTEPeripheral devices are sold separately.yyThe USB ports on the left and bottom of theyymonitor can be used to connect the keyboard, mouse, and other USB devices.NOTEHeadphones or speakers may not work noryymally, depending on the server PC settings.Virtual solutions may affect the functions oryyspeed of the specific USB storage device.
CUSTOMIZING SETTINGS15CUSTOMIZING SETTINGS2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.To return to the upper menu or set other menu items, use the up arrow () button.3 Select EXIT to leave the OSD menu.Monitor set ButtonsButtonDescriptionAccesses the main menus.(See p.16)OSD Locked/OSDUnlockedThis function allow you to lock the current control settings, sothat they cannot be inadvertently changed.Press and hold the MENU button for several seconds. ThenOSD of “OSD Lock” will appear. After that, user can selectlock or unlock by pressing left/right button.If user selects the “Lock” icon by pressing the “OK” button,the message “OSD Locked” will appear. Otherwise, “OSDUnlocked” will appear. After selecting the “Lock”, If you wantto change to Unlock, you can push the “MENU” button forseveral seconds. The message “OSD Unlocked” will appear.Use this button to enter Reader Mode menu. Its function works to display screen aspaper-like picture for Eye comfort.If you want to more information.(See p.21)Use this button to enter SMART ENERGY SAVING menu.(See p.22)When adjusting your display settings, always press the AUTO button on the MONITORSETUP OSD. (Only supported in Analog Mode)The best display mode 22BK55WD/22BK55WY: 1680 x 105024BK55WD/24BK55WY: 1920 x 1200You can choose the input signal. When two input signals are connected, you can select the input signal (D-SUB/DVI-D/DP) you want. When only one signal is connected, it is automatically detected. The default setting isD-SUB.EXITExit the OSD(On Screen Display).(Power Button)Turns the power on or off.Power IndicatorThe power indicator stays white if the display is runningproperly (On Mode). If the display is in Sleep Mode, the powerindicator blinks white.ENGENGLISH1 Press the desired button on the bottom of the Monitor set.
16CUSTOMIZING SETTINGSCustomizing SettingsENGLISHENGMenu Settings1 Press MENU button on the bottom of the Monitor set to display the Menu OSD.2 Set the options by pressing the or or buttons.3 Select the "Next Menu" button to enter the more option settings.4 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow () button.Each option is explained below.AnalogDigitalDPVolume To adjust the volumeBrightness To adjust the brightness of the screenResponse Time (Onlyuse for 24BK55WD/24BK55WY Model) You can set a response time for displayed pictures based on thespeed of the screen. For a normal environment, it is recommendedthat you use 'Off'. For a fast-moving picture, it is recommendedthat you use 'High'.MenuWide/OriginalDescriptionWideSwitch to full screen mode according to input image signal.Reset Original Restore all factory default settings. Press the , buttons toreset immediately.Menu Next MenuPictureColorChange the input image signal ratio to original.* This function works only if input resolution is lower than Monitorset ratio (16:9).Analog DigitalDPDescriptionContrast To adjust the contrast of the screenSharpness To adjust the clearness of the screen To customize the color of the screenGammaColor TempSix Color (Onlyuse for 24BK55WD/24BK55WY Model)Color Reset (Onlyuse for 24BK55WD/24BK55WY Model)Display HorizontalVerticalClockPhaseAudioAudio InputOthersLanguagePower Indicator To adjust the position of the screen To improve the clarity and stability of the screen To select the audio input To customize the screen status for a user's operatingenvironmentOff Time SettingAnalog: D-SUB(Analog signal) input.yyDigital: DVI-D(Digital signal) input.yyDP: Display Port input.yy
CUSTOMIZING SETTINGS17Picture2 Select the "Next Menu" button to enter the more option settings.3 Enter to Picture by pressing the button.4 Set the options by pressing the or or buttons.5 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow (Each option is explained below.Menu Next Menu PictureDescriptionContrastTo adjust the contrast of the screen.SharpnessTo adjust the clearness of the screen.) button.ENGENGLISH1 Press MENU button on the bottom of the Monitor set to display the Menu OSD.
18CUSTOMIZING SETTINGSColorENGLISHENG1 Press MENU button on the bottom of the Monitor set to display the Menu OSD.2 Select the "Next Menu" button to enter the more option settings.3 Select Color by pressing the button.4 Enter to Color by pressing the button.5 Set the options by pressing the or or buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow () button.Each option is explained below.Menu Next Menu ColorDescriptionGammaSet your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor,high gamma values display whitish images and low gamma values displayblackish images.Color TempCustom Red:Set your own red color levels. Green: Set your own green color levels. Blue:Set your own blue color levels.Select the screen color.Warm: Set the screen to warm color temperature (more red).Medium: Set the screen to medium color temperature.Cool: Set the screen to cool color temperature (more blue).Six Color(Only use for 24BK55WD/24BK55WY Model)Color Reset(Only use for 24BK55WD/24BK55WY Model)Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/Magenta/Yellow) to satisfy the color requirements of a user.HueAdjusts the screen hue.SaturationAdjusts the color sharpness on the screen. Lower values makethe color sharpness weaker and colors lighter while highervalues make the color sharpness stronger and colors dark.Resets the color settings to the factory default settings for the current inputdevice.
CUSTOMIZING SETTINGS19Display2 Select the "Next Menu" button to enter the more option settings.3 Select Display by pressing the button.4 Enter to Display by pressing the button.5 Set the options by pressing the or or buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow () button.Each option is explained below.Menu Next Menu DisplayDescriptionHorizontalTo move image left and right.VerticalTo move image up and down.ClockTo minimize any vertical bars or stripes visible on the screen background.Thehorizontal screen size will also change.PhaseTo adjust the focus of the display. This item allows you to remove any horizontalnoise and clear or sharpen the image of characters.Audio22BK55WY 24BK55WY1 Press MENU button on the bottom of the Monitor set to display the Menu OSD.2 Select the "Next Menu" button to enter the more option settings.3 Select Audio by pressing the button.4 Enter to Audio by pressing the button.5 Set the options by pressing the or buttons.6 Select EXIT to leave the OSD menu.To return to the upper menu or set other menu items, use the up arrow () button.Each option is explained below.Menu Next Menu AudioAudio InputDescriptionTo Select the audio source to output to speaker/headphone from below items.1. DP: The audio source on DP port (Only in DP input).2.Audio-In: The audio source on external analog audio jack.(Only in Dsub/DVI-D input)3.Auto : The audio source is switched automatically between DP or Audio-In.DP has higher priority. (Only in DP input)ENGENGLISH1 Press MENU button on the bottom of the Monitor set to display the Menu OSD.
20CUSTOM
OWNER’S MANUAL IPS LED MONITOR (LED LCD MONITOR) 22BK55WD 24BK55WD 22BK55WY 24BK55WY Please read this manual carefully before operating your set and retain it for future reference. IPS LED(LED LCD) MONITOR MODEL ENGLISH. 2 ENG ENGLISH TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR-ING
Aug 21, 2019 · philips lytecaster 344dstx-302mrex-42017-4 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 led 120 . recessed white 4" recessed downlight led, 1160 delivered lumens, 3000k, 90 cri cree lighting eaton mcgraw-edison ist-af-350-
IPS Style IPS e.max IPS Ivocolor universel glaçure individualiser Essence IPS d.SIGN polyvalent souple esthétique IPS InLine améliorer IPS d.SIGN Zenostar JOB
Owner's Manual IPS LED MOnItOr (LED MOnItOr*) *LG LED Monitors are LCD Monitors with LED Backlighting. 27UD88. 2 ENGLISH Contents 3 LICense 4 AsseMBLInG AnD PRePARInG 4 Product Components 5 Supported Drivers and Software 6 Component and Button Description 6 - How to Use the Joystick Button
A. Drive Bays M. Memory Fault LED B. UID Button N. UID Button C. Optical Disk Drive O. Module Power LED D. System Power LED P. SAFE TO PULL LED E. System Status LED Q. PRIMARY LED F. System FT LED R. IO Module Fault LED G. UID LED S. Fan Fault LED H. USB Connector T. PSU Fault LED I. Pull-out Tab U. DC Power Fault LED J. Power Button V .
2 Network IPS Appliances: IBM Security. The best practice is to use zero configuration networking and then to use IPS Setup, the web-based configuration wizard, to configure network settings for the IPS system. Find specific information on this method in the Installation Guide, Chapter 2. "Configuring network settings for the Network IPS system,"
Cisco ASA Series Firewall CLI Configuration Guide 31 Configuring the ASA IPS Module This chapter describes how to configure the ASA IPS module. The ASA IPS module might be a hardware module or a software module, depending on your ASA model. For a list of supported ASA IPS modules per ASA model, see the Cisco ASA Compatibility Matrix:
Please read this manual carefully before operating your set and retain it for future reference. *LG LED Monitors are LCD Monitors with LED Backlighting. LED LCD MONITOR MODEL OWNER'S MANUAL LED LCD Monitor (LED Monitor*) 24MK600M 22MK600M 27MK600M 27MK60TM
Anatomi Tulang dan Fisiologi Panggul 2.1.1 Tulang Tulang pelvis merupakan komposisi dari tiga buah tulang yakni dua tulang kokse . tulang pria lebih kekar dan kuat, sedangkan kerangka perempuan lebih ditujukan kepada pemenuhan fungsi reproduksi. Pada wanita bentuk thorak bagian bawah lebih besar, panggul berbentuk ginekoid dengan ala iliaka lebih lebar dan cekung, promontorium kurang .
