Cisco 640-916 Exam
Cisco 640-916 ExamVolume: 182 QuestionsQuestion No : 1A network architecture team is looking for a technology on Cisco Nexus switches that significantlysimplifies extending Layer 2 applications across distributed data centers. The team wants the Cisco DataCenter Interconnect between sites and without changing or reconfiguring the existing network design.Which technology should be used?A. Multiprotocol Label SwitchingB. Cisco FabricPathC. virtual switching systemD. virtual port channelE. Overlay Transport VirtualizationAnswer: EQuestion No : 2Which three devices support FCoE? (Choose three.)A. Cisco Nexus 5500B. Cisco Nexus 7000C. Cisco Nexus 3000D. Cisco Nexus 1000VE. Cisco UCS Fabric InterconnectAnswer: A,B,EQuestion No : 3Which is the maximum number of active zone sets on Cisco MDS 9500 Series Fibre Channel Switches?A. 1 with all licensesLeading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamB. 2 with Standard Zoning licenseC. 3 with Enhanced Zoning licenseD. 4 with Enterprise Zoning licenseAnswer: AQuestion No : 4In a large enterprise, which two SAN switches are ideal core switches for providing high availability?(Choose two.)A. Cisco Nexus 5548B. Cisco MDS 9710C. Cisco MDS 9509D. Cisco Nexus 7028E. Cisco MDS 9222iAnswer: B,CQuestion No : 5A network engineer wants to enable a FCoE feature on a Cisco Nexus 5500 Series Switch. When doesthat occur?A. after the configuration is saved and rebootedB. after the configuration is savedC. after at least one port is configured to operate in FCoE modeD. after the license is appliedAnswer: AQuestion No : 6In a Cisco Nexus 7009 switch with three N7K-F248XP-25E modules, what is the minimum number ofLeading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamFabric-2 modules needed to support full utilization of all the installed ports?A. 2B. 3C. 4D. 5E. 6Answer: DQuestion No : 7Where does the data plane operate on a Cisco Nexus 7000 Series Switch?A. unified crossbar fabricB. unified port controllerC. supervisor moduleD. Policy Feature CardE. Connectivity Management ProcessorAnswer: AQuestion No : 8Leading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamLeading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamThe Cisco Nexus 7000 Switch supports feature-based Licenses for various protocols. OnNexus-7010-PROD-A Switch, which package (PKG) applies to OTV?A. MPLS PKGB. TRANSPORT SERVICES PKGC. FCOE-N7K-F132XPD. OTV LICENSE PKGLeading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamAnswer: BQuestion No : 9Refer to the exhibit.Which two pieces of configuration information about interface Ethernet 1/10 can the engineer determine?(Choose two.)A. It runs at 10 Gbps.B. It is part of a logical port channel interface.C. It is configured as a point-to-point interface.D. It is administratively down.E. It uses a nonstandard MTU size.Answer: A,BQuestion No : 10Customer is configuring FCoE and NPV in their Data Center on Cisco Nexus 5000 Series Switches.Please go through the Topology and Exhibit 1 through 4 to answer the following questions.Topology:Leading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamLeading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamWhich two statements are true regarding disruptive load balancing and regarding the configuration in thisexample? (Choose two).A. In this scenario disruptive load balancing is disabled.B. In this scenario disruptive load balancing is enabled.C. Since FCID: 0x1c0000 is reserved, disruptive load balancing is not configured correctly.D. When disruptive load balancing is enabled, NPV redistributes the server interfaces across all availableNP uplinks when a new NP uplink becomes operational. To move a server interface from one NP uplink toanother NP uplink, NPV forces reinitialization of the server interface so that the server performs a newlogin to the core switch.Leading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamAnswer: A,DQuestion No : 11Refer to the exhibit.An engineer has configured a primary fabric interconnect with this configuration. Which two pieces ofinformation are needed to guarantee high availability and fail over for the secondary fabric interconnectfor the cluster? (Choose two.)A. Cisc0123!B. 10.10.10.10C. 10.10.10.1D. 10.10.10.16E. 10.0.10.25F. Fabric-AAnswer: A,BQuestion No : 12A network engineer needs to add four native Fibre Channel ports to a pair of UCS fabric interconnects.What two items would be the result of the engineer configuring four universal ports in the fabricinterconnect expansion card for storage mode and selecting apply? (Choose two.)A. The fabric interconnect port module reboots.B. The fabric interconnect reboots.Leading the way in IT testing and certification tools, www.examkiller.net
Cisco 640-916 ExamC. The ports immediately transition to storage ports.D. The ports are reconfigured as Fibre Channel storage ports.E. The ports are reconfigured as Fibre Channel host adapter ports.Answer: A,DQuestion No : 13What is the role of FIP in FCoE enabled Storage Area Networks?A. uses a dedicated EtherType of 0xFFFFB. discovers and initializes converged network capable devices connected to an Ethernet cloudC. reduces the number of network interface cards required to connect to disparate storage and IPnetworksD. reduces the number of cables and switchesAnswer: BQuestion No : 14Which is a key characteristic of virtual device contexts?A. allowing logical switches to be aggregated into a single physical switchB. allowing logical switches to be aggregated into multiple physical switchesC. allowing physical switches to be partitioned to a single virtual switchD. allowing physical switches to be partitioned to multiple virtual switchesAnswer: DQuestion No : 15Which three are features of Cisco OTV? (Choose three.)A. control plane-based MAC learningLeading the way in IT testing and certification tools, www.examkiller.net
A. Cisco Nexus 5548 B. Cisco MDS 9710 C. Cisco MDS 9509 D. Cisco Nexus 7028 E. Cisco MDS 9222i Answer: B,C Question No : 5 A network engineer wants to enable a FCoE feature on a Cisco Nexus 5500 Series Switch. When does that occur? A. after the configuration is saved and rebooted B. after the configuration is saved
Cisco ASA 5505 Cisco ASA 5505SP Cisco ASA 5510 Cisco ASA 5510SP Cisco ASA 5520 Cisco ASA 5520 VPN Cisco ASA 5540 Cisco ASA 5540 VPN Premium Cisco ASA 5540 VPN Cisco ASA 5550 Cisco ASA 5580-20 Cisco ASA 5580-40 Cisco ASA 5585-X Cisco ASA w/ AIP-SSM Cisco ASA w/ CSC-SSM Cisco C7600 Ser
Supported Devices - Cisco SiSi NetFlow supported Cisco devices Cisco Catalyst 3560 Cisco 800 Cisco 7200 Cisco Catalyst 3750 Cisco 1800 Cisco 7600 Cisco Catalyst 4500 Cisco 1900 Cisco 12000 Cisco Catalyst 6500 Cisco 2800 Cisco ASR se
Cisco Nexus 1000V Cisco Nexus 1010 Cisco Nexus 4000 Cisco MDS 9100 Series Cisco Nexus 5000 Cisco Nexus 2000 Cisco Nexus 6000 Cisco MDS 9250i Multiservice Switch Cisco MDS 9700 Series Cisco Nexus 7000/7700 Cisco Nexus 3500 and 3000 CISCO NX-OS: From Hypervisor to Core CISCO DCNM: Single
Cisco Nexus 7706 Cisco ASR1001 . Cisco ISR 4431 Cisco Firepower 1010 Cisco Firepower 1140 Cisco Firepower 2110 Cisco Firepower 2130 Cisco FMC 1600 Cisco MDS 91485 Cisco Catalyst 3750X Cisco Catalyst 3850 Cisco Catalyst 4507 Cisco 5500 Wireless Controllers Cisco Aironet Access Points .
Sep 11, 2017 · Note: Refer to the Getting Started with Cisco Commerce User Guide for detailed information on how to use common utilities for a record in Cisco Commerce. See Cisco Commerce Estimates and Configurations User Guide for more information.File Size: 664KBPage Count: 5Explore furtherSolved: Cisco Serial Number Lookups - Cisco Communitycommunity.cisco.comHow to view and/or update your CCO profilewww.cisco.comSolved: How do I associate a contract to my Cisco.com .community.cisco.comHow do I find my Cisco Contract Number? - Ciscowww.cisco.comPower calculator tool - Cisco Communitycommunity.cisco.comRecommended to you b
Apr 05, 2017 · Cisco 4G LTE and Cisco 4G LTE-Advanced Network Interface Module Installation Guide Table 1 Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Description Mode Operating Region Band NIM-4G-LTE-LA Cisco 4G LTE NIM module (LTE 2.5) for LATAM/APAC carriers. This SKU is File Size: 2MBPage Count: 18Explore furtherCisco 4G LTE Software Configuration Guide - GfK Etilizecontent.etilize.comSolved: 4G LTE Configuration - Cisco Communitycommunity.cisco.comCisco 4G LTE Software Configuration Guide - Ciscowww.cisco.comCisco 4G LTE-Advanced Configurationwww.cisco.com4G LTE Configuration - Cisco Communitycommunity.cisco.comRecommended to you b
Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unified Computing System (Cisco UCS), Cisco UCS B-Series Blade Servers, Cisco UCS C-Series Rack Servers, Cisco UCS S-Series Storage Servers, Cisco UCS Manager, Cisco UCS
Cisco 2951 2 2 Cisco 3925 4 4 Cisco 3945 4 4 Cisco 3925E 3 3 Cisco 3945E 3 3 Cisco 1841 1 1 Cisco 2801 2 1 Cisco 2811 2 1 Cisco 2821 2 1 Cisco 2851 2 1 Cisco 3825 4 2 Cisco 3845 4 4 Table 1A provides relevant software information Router Chassis Software Release Minimum Software Package Cisco 1921 15.0(1)M2 IP Base
