JSRHF Series NEW: Option See Page

JSRHF SeriesHigh Flow Bioprocess Clean Gas Pressure Reducing ValvesThe JSRHF Series high purity gas pressure regulator wasdesigned and built specifically for Bio-Pharma gas applications.Traditionally, manufacturers adapted their industrial gasregulators for use in biopharm by simply changing theconstruction materials and surface finish. Not so with theJSRHF. It's been designed specifically to minimize theexposed threaded connections associated with thosetraditional designs. And, it features an in-line removable trimset to facilitate quick trim change out and cleaning withoutvalve removal or disassembly.applicationsFeatures In-line removable seat and trim facilitate cleaning andmaintenanceBarstock construction guarantees material integrity andsurface finishMinimized internal volumeProprietary Jorlon diaphragm material provides exceptionally long life, CIP/SIP capability, and FDA and USP ClassVI complianceSoft seat material for ANSI Class VI shutoffDocumentationThe following documentation is shipped at no charge: Steriflow Unicert, a QC signed Certificate of Compliance for:- Material, listing heat numbers with attached MTR’s- Surface Finish- FDA/USP Class VI - for all thermoplastic and elastomers Traceability:- Each individual product serial number is traceable to theUnicert serial number, heat numbers and attached MTR’sIdeal for clean gases typically found inbio-pharmaceutical, pharmaceutical andfood & beverage processes including:Clean Filter AirNitrogenCarbon DioxideArgonOxygenCustom purge or blanket gasNOTE: Though not drainable in any installation orientation, this valve can be used onclean steam or non-cavitating liquids withSteriflow engineering application approval.Other documents must be requested at time of RFQ, or order:- ADI/TSE Free, Certified Test reports, Certificate of Origin.Steriflow by Jordan Valve3170 Wasson Road Cincinnati, OH 45209513.533.5600 800.543.7311 513.871.0105 (f)steriflow@richardsind.com www.steriflowvalve.comJSRHF Series High Flow Pressure Reducing ValvesThe durable valve body is machined from ASTM A479 316L.The metal trim components are machined from S21800Nitronic 60 to prevent galling. The internal components arefinished to ASME BPE SF5 20Ra μin (0.5 Ra μm), electropolished standard. The valve is outfitted with the rugged Jorlondiaphragm and Teflon seats and seals that are all FDAapproved, USP Class VI compliant materials. Thesematerials of construction enable JSRHF to withstand the rigors of SIP and CIP processes (if required for valves used onliquid applications).Sanitary ValvesNEW: Air AugmentOption: See Page 6

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEspeciFicationsSizes: 3/4" - 2" (DN20 - DN50)Maximum Operating Pressure: 300 psi max inlet @100 F / psi max PEnd Connections: Tri-clamp, Tube weld end and NPTStandard. VCR on Tri-clamp connections optional, contact factoryMaximum Operating Temperature: 250 psi max inlet@ 275 FOptional Cleaning Specifications: Clean for Oil-Free O2 Cleaning complying with ASTM G93-03 2011and CGA G-4.1-2009Gauge Ports: 1/4" FNPT is standard. Consult factory forothersBody and Trim Material*: ASME SA479 316L (UNS31603) is standard. EN 10272:2000 GR 1.4435, AL6XN , Hastelloy C-22 and others are optional.Flow Capacity - Cv (Kv) 3/4": Cv 2.5 (Kv 2,16) 1" & 1-1/2": Cv 3.5 (Kv 3,03), Cv 5 (Kv 4,31),Cv 7.5 (Kv 6,47), Cv 10 (Kv 8,65) 2": Cv 5 (Kv 4,31), Cv 7.5 (Kv 6,47), Cv 10 (Kv 8,65)Body Seals: Elastomer o-rings (EPDM, Viton,Silicon, Kalrez) - All FDA and USP Class VIcompliantSoft Seat: PTFE to 252 F (122 C) continuous or 275 F(135 C) intermittent [not to exceed 15 min. in a one hourperiod] FDA, USP Class VIFailure - Cv (Kv) 3/4": Cv 3.0 (Kv 2,59) 1" & 1-1/2": Cv 4.2 (Kv 3,63) 2": Cv 12 (Kv 10,38)Shutoff: Class VISpring Range: 25 - 250 psi (1,7 - 17,2 bar) 10 - 150 psi (0,7 - 10,3 bar) 5 - 100 psi (0,3 - 6,9 bar) 5 - 50 psi (0,3 - 3,4 bar) 5 -20 psi (0,3 - 1,4 bar) (2.5 & 3.5 Cv only)Surface Finish: Wetted Internal surface finish: Mechanically polished, and electropolished to ASME BPE SF5, 20Ra μin (0.5 Ra μm) as standard Exterior surface finish: Mechanically polished, andelectropolished to 40 Ra μin (1.0 Ra μm) as standard, Other finishes available upon requestSizing: Use SVCV Steriflow software sizing module, Sizeat 60% capacity for 2.5 & 3.5 Cv models, and size at 70%capacity on 5, 7.5 & 10 Cv modelsOptions: Panel Mount* The return spring is manufactured from 316 steel.Note: For a complete ancillary list of all wetted and non-wettedmaterial specifications, please contact Steriflow Valve.Dimensions2.5 & 3.5 Cv Model5, 7.5 &10 Cv Model6(152)6.57 (167)10.6 (269)2.6(66)1.86 (47)7.25(184)Weight: 12 lbs (5 kgs)8.82(224)-2-Weight: 33 lbs (15 kgs)

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEFeatures & BeneFits - moDel JsrHF: 2.5 anD 3.5 cvAutoclavable anodized aluminum knobavailable as cataloged optionOne piece diaphragm sub assemblypromotes quick, inline maintenance andfewer spare partsFive different color coded springranges allow you to select theoptimum spring for your applicationto minimize droopRugged bolted springhousing eliminates potentialbonnet compression failuresdue to inline vibrationLong lived Jorlon diaphragm(FDA and USP 88 , and 87 Class VI) virtuallyeliminates repetitive cycleinduced diaphragm failuresAll wetted parts areASTM A479 316LBalanced port design minimizes DPforces on the plug, maximizing stabilityin spite of supply pressure variationsPTFE seat for ANSIClass VI shutoff. Seat isalso made of FDA andUSP Class VI compliantmaterialIn-line removable seat and plug subassembly facilitatescleaning and maintenance in less than 10 minutesNOTE: Can be used on clean steam ornon-cavitating liquids (the design is notdrainable) with Steriflow engineering application approval.-3-

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEFeatures & BeneFits - moDel JsrHF: 5, 7.5 & 10 cvOne piece diaphragm sub assemblypromotes quick, inline maintenanceand fewer spare partsRugged bolted spring housingeliminates potential bonnetcompression failures due to inlinevibration and insure diaphragmperimeter compressionFive different color coded springranges allow you to select theoptimum spring for your applicationto minimize droopLong lived Jorlon diaphragm(FDA and USP 88 , and 87 Class VI) virtuallyeliminates repetitive cycleinduced diaphragm failuresAll wetted parts are made fromASTM A479 316L stainless steelbarstock materialFDA and USP ClassVI compliant TeflonSeatCaptured seat is same proventechnology that's been employed inthe MK96 PRV series for 25 yearsNOTE: Can be used on clean steam or noncavitating liquids (the design is not drainable)with Steriflow engineering application approval.-4-Inline replaceable seat and lower stem

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEpanel mount (pm) option For JsrHF 2.5, 3.5 cv5(127)Ø4.25 (108)5 (127)Required panel cut-out0.50(12,7)0.50(12,7)Ø0.332 (8,4)4 holes EQ SP on aØ5.66 (144) B.C.Weight: 12 lbs (5 kgs)0.25(6,4)panel mount (pm) option For 5, 7.5 & 10 cv5(127)Ø4.25 (108)5 (127)Required panel cut-out0.50(12,7)0.50(12,7)Ø0.332 (8,4)4 holes EQ SP on aØ5.66 (144) B.C.Weight: 33 lbs (15 kgs)0.25(6,4)-5-

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEFloW conFiGurations/ GauGe port optionsoutlet gageAoutletBinletoutletoutletinletCinletoutlet gageinlet gageoutlet gage270 DoutletSAMPLEEinletoutletinletoutletinlet90 inlet gage* Gage ports are 1/4" FNPT. Consult factory for Tri-clamp, VCR or other alternatives, or porting options.options For JsrHFAir AugmentThe air augment option provides a means for air loading the valve spring housing for automated control. To enable this function a 1/8" FNPT collar is installed on the spring housing(the same one used for the captured vent option), and a Teflon seal nut is included to sealthe adjusting screw threads to prevent leakage. The 1/8" FNPT port is used as the inputfitting for loading the spring housing with instrument air to completely automate or augmentmanual regulator control. An I/P transducer, or a small, self-relieving air set PRV regulator isrequired (ordered separately) to regulate the instrument air pressure.sample speciFicationsStainless Steel pressure regulator shall be made from ASTM A479 barstock material, whichincludes body and all wetted metal parts. Regulator shall be activated by an un-tied, FDAapproved, USP Class VI certified JorlonTM diaphragm. Regulator internal to hold minimalmedia volume. Regulator shall have one piece diaphragm subassembly, and trim that can bereplaced inline without dome/spring chamber disassembly.-6-

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEorDerinG scHematicModelSizeJSRHF — 075 —Material /Connection Type1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 141516176CJSRHFModelHigh Flow Gas Pressure Reducing Valve075100150200Size3/4" (DN20)1" (DN25)1-1/2" (DN40)2" (DN50)6C6N6T30Material / Connection Type*316L / Tri-Clamp316L / NPT316L / Tube WeldS. Steel 316L, 30 Ra µin (0,76 Ra µm) EP5&6T1T2T3T4ZZTrim/Seat Material - FDA & USP Class VI6L/PTFE (2.5 & 3.5 Cv)6L/PTFE (5 Cv)6L/PTFE (7.5 Cv)6L/PTFE (10 Cv)Non-Standard7&80205101525Range Spring/Outlet Pressure5 - 20 PSI (0,3 - 1,4 bar) (2.5 & 3.5 Cv only)5 - 50 PSI (0,3 - 3,4 bar)5 - 100 PSI (0,3 - 6,9 bar)10 - 150 (0,7 - 10,3 bar)25 - 250 (1,7- 17,2 bar)9 & 10Diaphragm MaterialJorlon PTFE - FDA & USP Class VI(2.5 & 3.5 Cv)Jorlon PTFE - FDA & USP Class VI (5 -10 Cv)Non-Standard* See Page 2 for complete material descriptions.J11&2Body FeatureCv / Connection SizePort Configuration*A2.5 Cv (3/4)"APort "A"B3.5 Cv (1" - 1-1/2")BPort "B"C5 Cv (1" - 2")CPort "C"D7.5 Cv (1" - 2")DPort "D"E10 Cv (1" - 2")EPort "E"ZZNon-StandardJ2ZZ11 & 12SKAK* Std. Gauge Ports are 1/4" FNPT. Contact factory for availability ofothers.3&41E1V1K1L2E2V2K2LAA1PMZZO-Ring - FDA & USP Class VEPDM (2.5 & 3.5 Cv)Viton (2.5 & 3.5 Cv)KLRZ (2.5 & 3.5 Cv)Silicone (2.5 & 3.5 Cv)EPDM (5-10 Cv)Viton (5-10 Cv)KLRZ (5-10 Cv)Silicone (5-10 Cv)1ActuatorStandard Actuator / Nylon KnobStandard Actuator / Autoclavable Anod.Aluminum KnobAir Loading provides fitting for air input onspring housing, and a stem seat nutPanel MountNon-StandardSee page 6 for complete description13 & 14ØNØBØCØDØEØFØGZZInlet Gauge*None0 - 30 PSIG/Bar (Dual)0 - 60 PSIG/Bar (Dual)0 - 100 PSIG/Bar (Dual)0 - 160 PSIG/Bar (Dual)0 - 200 PSIG/Bar (Dual)0 - 400 PSIG/Bar (Dual)Non-Standard* Gauges are Oil Free and O2 clean as standard.Continued on next page-7-

JSRHF SERIES HIGH FLOW BIOPROCESS CLEAN GAS PRESSURE REDUCING VALVEJSRHF/0920orDerinG scHematic (con't)ModelMaterial /Connection TypeSizeJSRHF — 075 —15NBCDEFGZ1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 141516176COutlet Gauge*None0 - 30 PSIG/Bar (Dual)0 - 60 PSIG/Bar (Dual)0 - 100 PSIG/Bar (Dual)0-160 PSIG/Bar (Dual)0 - 200 PSIG/Bar (Dual)0 - 300 PSIG/Bar (Dual)Non-Standard* Gauges are Oil Free and O2 clean as standard.160GFZSEP ComplianceNone RequiredSEP CompliantPED/CE compliance for 1-1/2” and 2”Non-Standard170SXAccessoriesNoneClean For Oil FreeClean for Oxygen*EN10204 3.1 Cert for Cv 2.5 -3.5Wetted PartsEN10204 3.1 Cert for Cv 5-10 Wetted PartsNon-StandardABZ* Procedure complies with ASTM G-93 2011 andCGA G-4.1-2009Steriflow Valve reserves the right to make revisions to its products, specifications, literature, and related information without notice.Please visit our website at www.steriflowvalve.com for the latest information on our products.

media volume. Regulator shall have one piece diaphragm subassembly, and trim that can be replaced inline without dome/spring chamber disassembly. outlet inlet outlet gage inlet gage * Gage ports are 1/4" FNPT. Consult factory for Tri-clamp, VCR or other alternatives, or porting options. A B D E outlet inlet outlet inlet outlet inlet inlet gage .