ADEMCO VISTA SERIES VISTA-128BP/VISTA-250BP/

2y ago
31 Views
2 Downloads
502.26 KB
80 Pages
Last View : 1d ago
Last Download : 2m ago
Upload by : Nadine Tse
Transcription

ADEMCO VISTA al BurglaryPartitioned Security SystemWith SchedulingUser GuideK5895V3 6/04 Rev A

Your Honeywell security system is designed for use with devices manufactured or approved byHoneywell for use with your security system. Your Honeywell security system is not designed foruse with any device that may be attached to your security system's keypad or othercommunicating bus if Honeywell has not approved such device for use with your security system.Use of any such unauthorized device may cause damage or compromise the performance of yoursecurity system and affect the validity of your Honeywell limited warranty. When you purchasedevices that have been manufactured or approved by Honeywell, you acquire the assurance thatthese devices have been thoroughly tested to ensure optimum performance when used with yourHoneywell security system.–2–

TABLE OF CONTENTSSYSTEM OVERVIEW.5General.5A Partitioned System.5Panel Linking .6Zones .6Fire Protection .6Burglary Protection.7Alarms .7Memory of Alarm.7Speed Key (Macros) .8Using Schedules .8Device Timers.8To Access Another Partition (GOTOCommand).8Master Keypad Operation .9Self-Help Feature.9Phone Access & Voice ResponseCapability.9ABOUT THE KEYPADS . 10General. 10The Alpha Keypad . 10FUNCTIONS OF THE KEYPAD. 11ENTRY/EXIT DELAYS . 14General Information . 14SECURITY CODES & AUTHORITYLEVELS. 15General Information . 15Duress Code. 15Quick Arming . 15Authority Levels . 16General Rules on Authority Levels andChanges . 17To Exit User Edit Mode . 17To Add a User. 18To Change a User's Code . 20To Delete a User. 21ACCESSING OTHER PARTITIONS . 22To Access Another Partition . 22Global Arming . 22Master Keypad Operation . 23Common Lobby Operation . 25How User Codes Affect the CommonLobby .26ACCESSING OTHER PANELS.27Single-Partition Single-Panel Mode.27Multi-Partition Multi-Panel Mode .28Multi-Panel View Mode.29Priority of Displays for Multi-Partitionand Multi-Panel Modes.30CHECKING FOR OPEN ZONES.31Using the READY Key .31DISPLAYING ALL ZONEDESCRIPTORS .32Using the READY Key .32BYPASSING PROTECTION ZONES .33Using the 6 BYPASS Key .33Quick Bypass .34Displaying Bypassed Zones.34Group Bypass .35ARMING PERIMETER ONLY .36Using the 3 STAY key.36Auto-STAY Arming .37ARMING PERIMETER ONLY .38Using the 7 INSTANT Key .38ARMING ALL PROTECTION .39Using the 2 AWAY Key.39ARMING ALL PROTECTION .40Using the 4 MAXIMUM Key .40QUICK EXIT .41Using the # 9 Keys.41DISARMING AND SILENCING ALARMS.42Using the 1 OFF Key .42Memory of Alarm.42USING THE KEYSWITCH .43General .43Arming .43–3–

Disarming . 43CHIME MODE. 44SETTING THE TIME AND DATE .61TESTING THE SYSTEM.62Using the 9 Key. 44Using the 5 TEST Key .62VIEWING CENTRAL STATIONMESSAGES . 45General Information . 45PANIC KEYS . 46Using Panic Keys. 46SPEED KEY (MACROS) . 47General Information . 47Defining . 47Executing. 48ACCESS DOOR CONTROL. 49General Information . 49Executing. 49USING #70 RELAY MENU MODE. 50General Information . 50USING SCHEDULES . 51Delaying the Closing Time . 51Temporary Open/Close Schedules. 51Programming Temporary Schedules . 52PROGRAMMING DEVICE TIMERS . 54General Information . 54Randomize Output Device Times. 56USING #77 INSTANT ACTIVATIONMODE . 57EVENT LOG PROCEDURES. 60General Information . 60To Display The Event Log. 60Testing Your System.62FIRE ALARM SYSTEM.63In Case Of Fire Alarm.63Silencing A Fire Alarm.63Fire Display Lock.63Typical Trouble Displays .64Power Failure.65Recommendations For Smoke AndHeat Detectors .66Recommendations For ProperIntrusion Protection .67EMERGENCY EVACUATION.68MAINTAINING YOUR SYSTEM.69Taking Care of Your System.69Replacing Batteries in WirelessSensors .69Silencing Low Battery Warning Tonesat the Keypad.70Routine Care.70QUICK GUIDE TO SYSTEMFUNCTIONS.71QUICK GUIDE TO SYSTEMFUNCTIONS.72SUMMARY OF AUDIBLENOTIFICATION.73INDEX .78–4–

System OverviewGeneralYour Honeywell security system consists of a main control panel, at least onekeypad, and various sensors strategically positioned throughout thepremises. The system offers you three forms of protection: burglary, fire andemergency. The keypad provides full control of system operation.The system uses microcomputer technology to monitor all protection zonesand system status and provides appropriate information for display on thekeypad(s) used with the system, and initiates appropriate alarms. Yoursystem may also have been programmed to automatically transmit alarm orstatus messages over the phone lines to a central alarm monitoring station.This manual is designed to help you become comfortable operatingyour system. Each function is explained in step-by-step detail. Werecommend you read the SYSTEM OVERVIEW section to becomefamiliar with the terminology and the basic features of the system.NOTE: If you have a Symphony (Advanced User Interface) and/orTeleSmart connected to your system, refer to the Symphony andTeleSmart User Guides for operating instructions for those units.NOTE: All references in this manual for number of zones, number ofuser codes, number of access cards, and the event log capacity, usethe VISTA-250BP’s features. The following table lists the differencesbetween the VISTA-128BP/128SIA and the VISTA-250BP controlpanels. Additionally, only the VISTA-128BP/128SIA supports thecapability to have a device duplicate keypad sounds at a remotelocation. All other features are identical for both panels.FeatureVISTA-128BP/128SIAVISTA-250BPNumber of Zones128250Number of User Codes150250Number of Access Cards250500Event Log Capacity5121000815VistaKey Modules–5–

System Overview (cont’d)A Partitioned SystemSimply stated, a partitioned system shares one physical alarm system amongdifferent users, each with their own requirements. For the most part, you asa user need not know about other users and their structure in the system,but from time to time, you may see display messages that indicate the systemis in use by another user. Do not be concerned, this is normal. Refer to theACCESSING OTHER PARTITIONS section for additional information.Panel LinkingPanel Linking networks up to eight VISTA-128BP/VISTA-250BP controlpanels, enabling a user to control the features of all control panels from asingle location. The Panel Linking is ideal for multi-building environments(e.g. a shopping mall, college campus, etc.).The system provides the following three modes to access other “linked”control panels: Single-Partition, Single-Panel displays status of a partition on a remotecontrol panel and allows control of that remote control panel. Multi-Partition, Multi-Panel Mode displays status and allowsarming/disarming of multiple partitions at once on a remote controlpanel. Multi-Panel View Mode displays status and allows arming/disarming ofmultiple remote control panels at a time.ZonesYour system's sensing devices have been assigned to various "zones." Forexample, the sensing device on your Entry/Exit door may have been assignedto zone 001, sensing devices on windows in the master bedroom to zone 002,and so on. These numbers will appear on the display, along with an alphadescriptor for that zone (if programmed), when an alarm or trouble conditionoccurs.Fire ProtectionThe fire protection portion of your security system (if used) is always on andwill sound an alarm if a fire condition is detected. Refer to the FIRE ALARMSYSTEM section for important information concerning fire protection, smokedetectors and planning emergency exit routes from your house.–6–

System Overview (cont’d)Burglary ProtectionThe burglary protection portion of your system must be turned on or "armed"before it will sense burglary alarm conditions. Your system provides fourmodes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, andeven allows you to BYPASS selected zones of protection while leaving therest of the system armed. The system also provides a CHIME mode, foralerting users to the opening and closing of doors and windows while thesystem is disarmed. Refer to the other sections of this manual for proceduresfor using these features.The following table lists the four different arming modes and the results ofeach.Features For Each Arming YYesYesYesSTAY YesYesYesINSTANT YesNoYesMAXIMUMYesNoYes The system provides three different STAY and INSTANT arming modes. SeeARMING IN THE STAY MODES and ARMING IN THE INSTANT MODESsections for details on these modes.AlarmsWhen an alarm occurs, both the keypad and external sounders will sound,and the keypad will display the zone(s) causing the alarm. If your system isconnected to a central monitoring station, an alarm message will also be sent.To stop the alarm sounding, simply disarm the system.Memory of AlarmWhen an alarm condition occurs, the keypad displays the number(s) of thezone(s) that caused the problem, and displays the type of alarm (ex. FIRE,ALARM). It remains displayed until it is cleared by disarming the system(see DISARMING THE SYSTEM section).–7–

System Overview (cont’d)Speed Key (Macros)The system can store a string of up to 32 keystrokes, which can be activatedanytime by simply pressing the “A, B, C, or D” keys. This feature can beused to make it easy to perform multiple functions at once (such as going toanother partition to bypass a zone), or it can be used to simplify an everyday,repeated procedure. Refer to the SPEED KEY section for procedures forusing this feature.Using SchedulesYour system may have been programmed with schedules for automaticallyarming, disarming and activating various devices and/or performing othersystem functions at predetermined times. Users can modify some of theseschedules by manually delaying a closing time, using temporary schedules, orby programming special user schedules. Refer to the USING SCHEDULESsection at the end of this manual for scheduling related procedures.Device TimersThe system provides up to 20 "timers" that can be used to control variousdevices, such as lights or appliances. These timers are similar in concept tothe individual appliance timers that might be purchased at a departmentstore. The devices that can be controlled are programmed into the system bythe installer. Up to 96 of these devices can be programmed. Refer to thePROGRAMMING DEVICE TIMERS section for procedures.To Access Another Partition (GOTO Command)Each keypad is assigned a default partition for display purposes, and willshow only that partition's information. But, if the user is authorized, akeypad in one partition can be used to perform system functions in anotherpartition, by using the GOTO command. Note that only those partitionsauthorized and programmed by the installer can be accessed in this manner.To GOTO another partition, enter your security code, then press [ ] followedby the desired partition number (1-8).The keypad will remain in the new partition until directed to go to anotherpartition, or until 120 seconds has elapsed with no keypad activity. Enteringyour security code, pressing [ ] followed by [0] will return the keypad to itsoriginal partition.–8–

System Overview (cont’d)Master Keypad OperationA "Master" keypad is one on which the status of all 8 partitions is displayedsimultaneously. A user can get more information about a certain partition bysimply entering [ ] the desired partition number (1-8). To log on to the"Master" partition (9) using the GOTO command, and to perform anyfunctions at a Master keypad, a user must have access to all partitions.Self-Help FeatureAbbreviated user's instructions are built into the system that can be easilyviewed on the alpha keypad's message display screen. This feature will proveparticularly useful if this manual is not conveniently accessible when youneed to perform a system procedure with which you are not familiar.To view the abbreviated instructions:Simply press and hold down the function key of interest until the descriptionstarts to appear (about 5 seconds) and then release it. The system must be“READY TO ARM” to perform this function.Refer to the FUNCTIONS OF THE KEYPAD section for descriptions of eachkey function.Phone Access & Voice Response CapabilityYour system may include a 4285 or 4286 VIP module that will permit you toaccess the system via a Touch-tone phone, either on-premises or by call-inwhen away. The phone access feature will enable you to do the following: Receive synthesized voice messages over the telephone regarding thestatus of the security system. Arm and disarm the system and perform most function commands viathe telephone, with voice confirmation provided after each commandentry. Control 4204/4204CF relays devices and lights and appliances throughthe #70 Manual Relay Activation mode.Complete information regarding the use of this feature is provided in aseparate manual entitled PHONE ACCESS USER'S GUIDE, whichaccompanies the 4285 or 4286 VIP module.–9–

About The KeypadsGeneralIMPORTANT: If the keypad beeps rapidly upon entering thepremises, it indicates that an alarm has occurred during yourabsence. LEAVE IMMEDIATELY and CONTACT THE POLICEfrom a safe location nearby.NOTE: If you have a Symphony (Advanced User Interface) and/orTeleSmart connected to your system, refer to the Symphony andTeleSmart User Guides for operating instructions for those units.Your keypads allow you to control all system functions. The keypads featurea telephone style (digital) keypad and a Liquid Crystal Display (LCD) thatshows the nature and location of all occurrences. Keypad display backlighting is programmable to always stay on or to light only when a key ispressed, then turn off a few minutes later.The keypads also feature a built-in sounder that will sound during alarmsand troubles. It will also "beep" during certain system functions, such asduring entry/exit delay times, during CHIME mode, and when depressingkeys to perform system functions (to acknowledge the key press). Thesesounds can be optionally suppressed in some of your keypads (so as not todisturb other users of the system). Ask your installer if this has been done.The Alpha KeypadAlpha keypads feature a 2-line, 32 character alphanumeric Liquid CrystalDisplay (LCD) that can display system messages in user-friendly English.Abbreviated user's instructions can also be displayed (see Self Helpparagraph in the SYSTEM OVERVIEW section). These keypads can also beprogrammed with custom zone descriptors.– 10 –

––

between the VISTA-128BP/128SIA and the VISTA-250BP control panels. Additionally, only the VISTA-128BP/128SIA supports the capability to have a device duplicate keypad sounds at a remote location. All other features are identical for both panels. Feature VISTA-128BP/128SIA VISTA-250BP Number of Zones 128 250 Number of User Codes 150 250

Related Documents:

programming the VISTA-128SIA. All references in this manual for number of zones, number of user codes, number of access cards, and the event log capacity, use the VISTA-250BP’s features. The following table lists the differences between the VISTA-128BP/128SIA and the VISTA-250BP control panels. All other features are identical, except for the

programming the VISTA-128SIA. All references in this manual for number of zones, number of user codes, number of access cards, and the event log capacity, use the VISTA-250BP's features. The following table lists the differences between the VISTA-128BP/128SIA and the VISTA-250BP control panels. All other features are identical, except for the

ADEMCO VISTA-10PSIA Security Systems User Guide K0736V3 10/04 Rev. B – 2 – IMPORTANT! . Your Honeywell security system is designed for use with devices manufactured or approved by . The features and procedures described in this manual apply to the ADEMCO VISTA-10P and ADEMCO VISTA-10PSIA. Differences are noted where applicable.

VISTA-128BP Symphony ECP Bus 5808LST Wireless Smoke 5890 Wireless PIR 5816 Door/Window Transmitter VISTA-128BP 5800 Series Wireless Devices VISTAKey V-Plex Access Control Module 5817CB Universal Contact Monitori

ADEMCO VISTA-48A ADEMCO VISTA-48E Security Systems Installation and Setup Guide K0749-1ENV1 10/05 Rev. A

ADEMCO VISTA-48A ADEMCO VISTA-48E Security Systems User Guide K0750-1EN 11/04 Rev. A

ADEMCO VISTA-48A ADEMCO VISTA-48E Security Systems User Guide ÕðغðóïÛÒ ïïæðì »“ò ß www.msealarms.com.au

Austin, Oscar Palmer Nacogdoches, TX Vietnam War Austin, William . Lopez, Jose Mendoze Mission, TX (Santiago Huitlan, Mexico) World War II (Most sources say that Lopez was born in Texas but he later stated in multiple interviews and his funeral program recorded that he was born in Mexico) Lummus, Jack Ennis, TX World War II Martinez, Benito Fort Hancock, TX Korean War . Compiled by Gayle .