Cisco Intelligent Automation For Cloud Starter Edition .
Cisco Intelligent Automation for CloudStarter Edition Configuration GuideRelease 3.0.2Published: September 2012Revised: October 10, 2012Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Text Part Number: OL-27806-01
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALLSTATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUTWARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THATSHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSEOR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s publicdomain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITHALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUTLIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OFDEALING, USAGE, OR TRADE PRACTICE.IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCOOR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to thisURL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnershiprelationship between Cisco and any other company. (1110R)Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command displayoutput, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers inillustrative content is unintentional and coincidental.Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration Guide 2012 Cisco Systems, Inc. All rights reserved.
CONTENTSNew and Changed sxvProduct Documentation xviDocumentation Formats xviGuides and Release Notes xviOnline Help xviProduct Naming Conventions xviOther Naming Conventions xviObtaining Documentation and Submitting a Service RequestCHAPTER1Solution Prerequisitesxvii1-1Minimum System Requirements 1-2Minimum Hardware Requirements for Platform ElementsMinimum Software Requirements 1-3Default Ports and ProtocolsLimitations and Scalability1-21-41-5Customer Environment 1-6Starter Edition Software Installation Preparation 1-6Networks 1-7Storage Management Preparation 1-7Cisco UCS and Bare Metal Operating System Provisioning PreparationCisco UCS Manager 1-8Cisco UCS Manager Pools 1-8Cisco UCS Manager Service Profile Templates and Policies 1-9VMware Software Preparation 1-9Supported Installation Media for ESXi 1-10VMware Software Installation Requirements 1-10Directory and Mail Server Preparation 1-10Organizations and Users Preparation 1-101-8Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01iii
ContentsCHAPTER2Configuring Tidal Enterprise Orchestrator2-1Import the Automation Packs in Tidal Enterprise Orchestrator 2-2Launch the Automation Pack Import Wizard 2-2Import the Core Automation Pack 2-3Import the Common Activities Automation Pack 2-8Import and Configure the Intelligent Automation for Compute Automation PackImport and Configure the Intelligent Automation for Cloud StarterAutomation Pack 2-132-9Manually Set Extended Target Properties for Linux 2-19Configure Extended Target Properties for Cisco Cloud Portal Integration API 2-19Create a Runtime User for the Linux Target 2-19Create a Target for the Linux Server 2-21Configure the Extended Target Properties for Both Cloud Portal Web Service TargetsConfigure Extended Target Properties for Cisco Cloud Portal Request Center API 2-22Refresh Tidal Enterprise Orchestrator Server Web ServiceCHAPTER3Installing the REX AdapterPrerequisites3-2Install the REX Adapter42-233-1Apply the Cloud Portal 9.4 Patch V2LCHAPTER2-223-23-2Setting Up Cisco Cloud Portal and Deploying Starter Edition ContentEnable Web Services4-14-2Create a Dropbox for Data Synchronization4-3Import and Deploy Starter Edition Service Catalogs 4-3Copy Service Catalog Files to Cloud Portal Server 4-4Import and Deploy Service Catalogs 4-4Import and Deploy Portal Packages 4-5Copy the Starter Edition Portlets Package and Extract FilesConfigure Cloud Portal Stylesheets 4-6Import and Deploy Portal Pages 4-9Modify Maximum Numbers for Tabs, Portals, and PortletsModify Column Settings for the Site Homepage4-54-104-12Set Permissions for Portals and Portlets 4-13Set Permissions for the Cisco IAC Starter Edition Administration PortalsSet Permissions for the My Workspace Portals 4-15Set Permissions for the System Portal 4-154-13Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideivOL-27806-01
ContentsSet Permissions for Portlets4-16Add Portal Access to My Workspace4-17Add Starter Edition Roles to the Cisco Intelligent Automation for Cloud Roles GroupAssign Additional Permissions for the Cloud Provider Technical Administrator RoleSet Read/Write Permissions for Organization Unit, Person, and Queue 4-21Set Read/Write Permissions for Role 4-22Set Permissions for Service Queue Management 4-234-194-21Enable Task Supervisor to Cancel Tasks in theCancellation Queue 4-25CHAPTER5Running the Starter Edition Quick Setup WizardPrerequisitesOverview5-25-2Getting Started5-3Step 1: Agent Properties ConfigurationStep 2: Cloud Administration5-35-4Step 3: Connect Cloud InfrastructureStep 4: Set Provisioning Settings5-55-6Step 5: Register Blades and TemplatesStep 6: Add Networks65-75-8Step 7: Set Up Shared ZoneCHAPTER5-15-9Setting Up the Cloud AdministrationSet Up REX and nsAPI User Accounts6-16-2Configure Agent Properties 6-5Set Username and Password for REX Set REX Agent PropertiesStart the REX and HTTP Agent Properties Agents 6-7Set REX Agent Configuration 6-7Set HTTP Agent Configuration 6-10Start All Other Agents 6-12Assign Email Addresses for Queue NotificationsConfigure the Email Notification Templates6-66-136-15Create the Cloud Provider Technical Administrator Home Organization6-19Add Cloud Provider Technical Administrators 6-20Add Cloud Administrators in the Directory Service (If Applicable) 6-20Manually Add Cloud Administrators (Without Directory Service) 6-21Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01v
ContentsCHAPTER7Setting Up the Cloud Infrastructure7-1Connect the Cloud Platform Elements 7-2Define the VMware vCenter Server Platform Element 7-2Define the Cisco UCS Manager Platform Element 7-4Define the Cisco Server Provisioner Platform Element 7-5Obtain the Authorization APID 7-6Set Provisioning Settings7-7Add Required Networks 7-9Add an Infrastructure Network 7-9Add a Community Network 7-13Set Up the Shared Server Zone7-15Register One or More VM TemplatesRegister One or More Cisco UCS Blades7-187-20Register One or More Cisco UCS Service Profile TemplatesCHAPTER8Post-Configuration Options7-228-1Register Additional Templates 8-2Register an Operating System Template 8-2Register Additional VM Templates 8-3Register Additional Service Profile TemplatesRegister Additional Blades and Manage Blade PoolsRegister Additional Cisco UCS Blades 8-4Manage Blade Pools 8-48-38-4Modify Standards for Service Options 8-7View Standards Settings 8-7Add, Modify, or Delete a Lease Term Standard 8-8Add a New Lease Term Standard 8-9Modify a Lease Term Standard 8-11Delete a Lease Term Standard 8-12Add, Modify, or Delete an Operating System StandardAdd an Operating System Standard 8-13Modify an Operating System Standard 8-14Delete an Operating System Standard 8-14Add, Modify, or Delete a Server Size Standard 8-15Add a Server Size Standard 8-15Modify a Server Size Standard 8-16Delete a Server Size Standard 8-168-13Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideviOL-27806-01
ContentsAdd Additional Networks 8-17Add a User Network 8-17Add a Management Network8-19Remove Reserved Portlet Buttons from the My Workspace ToolbarCHAPTER9Setting Up an Organization and Adding UsersCreate an Organization8-209-19-2Set Up Directory Integration (If Applicable)9-4Create a New User to Add as an Organization Technical Administrator9-4Assign Additional Permissions for the Organization Technical Administrator RoleAssign Read/Write Permissions for Role 9-6Assign Read/Write Permissions for Person 9-7Add a Server OwnerAPPENDIXA9-8Upgrading to Cisco Intelligent Automation for Cloud Starter Edition 3.0.2Overview9-6A-1A-2Back Up the Cloud Portal and TEO DatabasesA-2Manually Update the Port Number for Cloud Portal TargetsInstall Tidal Enterprise Orchestrator Content Update 2.3.2Upgrade Cisco Cloud Portal from 9.3.2 to 9.4Apply the Cloud Portal 9.4 Patch V2LInstall the REX AdapterA-3A-4A-4A-4Deploy Service Catalog PackagesDeploy Portal PackagesA-3A-4A-5Configure Contact Information for Service Queue NotificationsConfigure the Email Notification TemplatesA-5A-5Add Starter Edition Roles to the Cisco Intelligent Automation For Cloud Roles GroupConfigure Agent PropertiesA-6Verify Cloud Provider Technical Administrator OrganizationSet Provisioning SettingsAPPENDIXBIntroductionA-6A-6Setting Up Directory IntegrationPrerequisitesA-5B-1B-2B-2Step 1: Configuring the LDAP ServerB-3Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01vii
ContentsStep 2: Configure AuthenticationConfigure Mappings B-5Configure Events B-6B-5Step 3: Configure Authorization (Optional) B-8Create a Security Group for Each User Role on the LDAP ServerAdd the nsAPI User to the Cloud Administration Group B-9Configure User Role Mappings B-9Step 4: Enable Directory IntegrationAPPENDIXB-10Constructing Paths Using Cisco UCS Manager and VMware vSphereCCisco UCS PathsDC-1C-2VMware vCenter PathsAPPENDIXB-8C-4Solution Prerequisites ChecklistsD-1Minimum Hardware Requirements for Platform ElementsMinimum Software RequirementsDefault Ports and ProtocolsLimitations and ScalabilityD-3D-4D-5Starter Edition Software Installation PreparationNetwork RequirementsD-2D-5D-6Storage Management RequirementsD-6Cisco UCS Manager and Bare Metal Operating System Provisioning RequirementsVMware Software RequirementsD-8Directory and Mail Server RequirementsOrganizations and Users PreparationAPPENDIXESolution Deployment ChecklistsStarter Edition PrerequisitesD-8D-8E-1E-2Tidal Enterprise Orchestrator Setup ChecklistREX Adapter Installation ChecklistCloud Portal Setup ChecklistD-7E-2E-2E-3Service Catalog Deployment ChecklistPortal and Portlet Deployment ChecklistE-3E-3Permissions Settings for Portal and Portlets ChecklistsE-4Starter Edition Quick Setup Wizard Checklist (Optional)E-5Cloud Administration Setup ChecklistE-6Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideviiiOL-27806-01
ContentsEmail Notification Template Modification ChecklistCloud Infrastructure Setup ChecklistE-8Directory Integration Setup Checklist (If Applicable)Organizations and Users Setup ChecklistAPPENDIXFSolution Deployment WorksheetsHardware SpecificationsF-2Software SpecificationsF-3Database Connection SettingsE-7E-8E-9F-1F-4TEO Web Service Target SettingsF-5TEO-Cloud Portal Integration API Connection User Account CredentialsREX Adapter Installation SettingsF-5F-6Directory Integration Settings (If Applicable)Datasource Settings F-7Mappings Settings F-8Events Settings F-8F-7Cloud Administrator and Organization SettingsF-9Agent Properties Settings F-9REX Set REX Agent Configuration Settings F-9REX Agent Configuration Settings F-10Set HTTP Properties Configuration Settings F-10Email Addresses for Queue NotificationsF-11Cloud Platform Connection Settings F-11VMware vCenter Server Connection Settings F-11Cisco UCS Manager Connection Settings F-12Cisco Server Provisioner Connection Settings F-12Provisioning SettingsF-13Network Settings F-14Infrastructure Network Settings F-14Community Network Settings F-15User Network Settings (Optional) F-15Management Network Settings (Optional)Shared Server Zone SettingsVM Template SettingsF-16F-16F-17Cisco UCS Service Profile Template SettingsF-18Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01ix
ContentsCisco UCS Blade SettingsF-19Operating System Template Settings (Optional)F-20Standards Settings (Optional) F-21Lease Term Standards F-21Operating Systems Standards F-22Server Size Standards F-22INDEXCisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuidexOL-27806-01
New and Changed InformationTable 1 lists new and changed information in the Cisco Intelligent Automation for Cloud StarterEdition 3.0.2 Configuration Guide.Table 1New and Changed Information—Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 ConfigurationGuideFeatureLocationChanged onVersion numbers of supported software removed fromChapter 1, “Solution Prerequisites,” and replaced withcross references to the Cisco Intelligent Automation forCloud Product Compatility Matrix.Chapter 1, “Solution Prerequisites”October 2012Version numbers of supported software removed fromAppendix D, “Solution Prerequisites Checklist,” andreplaced with cross references to the Cisco IntelligentAutomation for Cloud Product Compatility Matrix.Appendix D, “Solution PrerequisitesChecklists”October 2012Name of Chapter 3, “Installing Cisco Cloud Portal and the Chapter 3, “Installing the REX Adapter” September 2012REX Adapter,” changed to “Installing the REX Adapter.”Instructions for installing Cisco Cloud Portal removed.Chapter 3, “Installing the REX Adapter” September 2012Instructions for installing the REX adapter added.Chapter 3, “Installing the REX Adapter” September 2012Checklist added for the REX adapter installation.Appendix E, “Solution DeploymentChecklists”September 2012Worksheet added for recording variable definitions for the Appendix F, “Solution DeploymentREX adapter installation.Worksheets”September 2012The file name for the Starter Edition Portlets package hasbeen updated from StarterEditionPortlets 9.3.1.zip toStarterEditionPortlets 9.4.zip.September 2012Chapter 4, “Setting Up Cisco CloudPortal and Deploying Starter EditionContent”Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01xi
New and Changed InformationTable 1New and Changed Information—Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 ConfigurationGuide (continued)FeatureLocationChanged onThe file path to the location where you extractRequestCenter war.zip has been updated fromChapter 4, “Setting Up Cisco CloudPortal and Deploying Starter EditionContent”September 2012 CiscoServicePortal tCenter.ear\RequestCenter.warto JBOSS DIR /standalone/deployments/RequestCenter.warA new screenshot of the Set HTTP Agent Configurationform, showing the new Authentication Scheme field, hasbeen added.Set HTTP Agent Configuration, page 10, September 2012in Chapter 6, “Setting Up the CloudAdministration”A description of the new Authentication Scheme field and Set HTTP Agent Configuration, page 10, September 2012its options has been added.in Chapter 6, “Setting Up the CloudAdministration”Item added to worksheet for Authentication Scheme setting Appendix F, “Solution Deploymentin Set HTTP Agent Configuration.Worksheets”September 2012Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuidexiiOL-27806-01
PrefaceThe Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration Guide providesinstructions for installing the REX adapter and configuring Starter Edition. It includes information aboutpreparing your environment with the prerequisite application servers and software, installing the StarterEdition content, configuring Cisco Cloud Portal and setting up your cloud environment.OrganizationThis guide includes the following sections:Chapter 1Solution PrerequisitesProvides information about preparing your environmentwith the prerequisite servers and software prior toinstalling Starter Edition.NoteYou must review this chapter in its entirety beforeinstalling Starter Edition to ensure that allrequirements are fulfilled. Use the checklists inAppendix D, “Solution Prerequisites Checklists,”to ensure that your environment meets allrequirements.Chapter 2Configuring Tidal Enterprise Guides you through the necessary tasks to importOrchestratorAutomation Packs into Tidal Enterprise Orchestrator andset extended target properties for Linux (if applicable).Chapter 3Installing the REX AdapterChapter 4Guides you through the necessary tasks to prepare CiscoSetting Up Cisco CloudPortal and Deploying Starter Cloud Portal for configuration, deploying service catalogs,and deploying portal pages.Edition ContentChapter 5Running the Starter EditionQuick Setup WizardProvides instructions for installing the required REXadapter.Guides you through setting up and configuring vitalcomponents of Cisco Intelligent Automation for CloudStarter Edition. It saves you time by providing access tothe various forms and services from one locationCisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration GuideOL-27806-01xiii
PrefaceChapter 6Setting Up the CloudAdministrationProvides steps for establishing the Cloud ProviderTechnical Administrator home organization and addingCloud Provider Technical Administrators.Chapter 7Setting Up the CloudInfrastructureProvides steps for setting up platform elements forVMware vCenter Server , Cisco Unified ComputingSystem (UCS) Manager, and Cisco Server Provisioning;adding networks; and setting up a shared server zone.Chapter 8Post-Configuration OptionsProvides steps for optional tasks, such as adding additiontemplates and networks, registering Cisco UCS blades,and modifying standards.Chapter 9Setting Up an Organizationand Adding UsersGuides you through creating an organization, assigning anOrganization Technical Administrator, assigningpermissions, and adding Server Owners.Appendix A Upgrading to CiscoIntelligent Automation forCloud Starter Edition 3.0.2Guides you through upgrading from Starter Edition 3.0.1to 3.0.2.Appendix B Setting Up DirectoryIntegrationProvides instructions for integrating your directory serviceinto Starter Edition.NoteRefer this appendix only if you are using adirectory service to import user and organizationinformation.Appendix C Constructing Paths UsingCisco UCS Manager andVMware vSphereProvides instructions on how to identify the paths toVMware vCenter and UCS Manager resources that youmust enter when performing certain tasks.Appendix D Solution PrerequisitesChecklistsProvides a means for ensuring that your environmentmeets all of the requirements for setting up and usingStarter Edition.Appendix E Solution DeploymentChecklistsGuides you through each step in the configuration process.The checklists include each set of instructions in thisguide, in sequence, that
Contents v Cisco Intelligent Automation for Cloud Starter Edition 3.0.2 Configuration Guide OL-27806-01 Set Permissions for Portlets 4-16 Add Portal Access to My Workspace 4-17 Add Starter Edition Roles to the Cisco Intelligent Automation for Cloud Roles Group 4-19 Assign Additional Permissions for the Cloud Provider Technical Administrator Role 4-21 Set Read/Write Permissions for Organization .
The Cisco Intelligent Automation for Cloud 3.0 Starter Edition User Guide provides instructions for setting up, managing, and ordering from the Cloud Portal. About Cisco Intelligent Automation for Cloud Starter Edition The Cisco Intelligent Automation for Cloud 3.0 Starter Edition is a simple, compute-only, single
Cisco ASA 5505 Cisco ASA 5505SP Cisco ASA 5510 Cisco ASA 5510SP Cisco ASA 5520 Cisco ASA 5520 VPN Cisco ASA 5540 Cisco ASA 5540 VPN Premium Cisco ASA 5540 VPN Cisco ASA 5550 Cisco ASA 5580-20 Cisco ASA 5580-40 Cisco ASA 5585-X Cisco ASA w/ AIP-SSM Cisco ASA w/ CSC-SSM Cisco C7600 Ser
Cisco Intelligent Automation for Cloud . Compatibility & Requirements Matrix . Release 4.2 . Cisco Systems, Inc. . Cisco IAC Compatibility Matrix Cisco Systems Confidential 3 Cisco Intelligent Automation for Cloud 4.2 Compatibility Matrix Revised: KEY 4 4: 32 0 * 4.2 4.1.1 4.1: 4.0.0 3.1.1:
Supported Devices - Cisco SiSi NetFlow supported Cisco devices Cisco Catalyst 3560 Cisco 800 Cisco 7200 Cisco Catalyst 3750 Cisco 1800 Cisco 7600 Cisco Catalyst 4500 Cisco 1900 Cisco 12000 Cisco Catalyst 6500 Cisco 2800 Cisco ASR se
Cisco Nexus 1000V Cisco Nexus 1010 Cisco Nexus 4000 Cisco MDS 9100 Series Cisco Nexus 5000 Cisco Nexus 2000 Cisco Nexus 6000 Cisco MDS 9250i Multiservice Switch Cisco MDS 9700 Series Cisco Nexus 7000/7700 Cisco Nexus 3500 and 3000 CISCO NX-OS: From Hypervisor to Core CISCO DCNM: Single
Cisco Nexus 7706 Cisco ASR1001 . Cisco ISR 4431 Cisco Firepower 1010 Cisco Firepower 1140 Cisco Firepower 2110 Cisco Firepower 2130 Cisco FMC 1600 Cisco MDS 91485 Cisco Catalyst 3750X Cisco Catalyst 3850 Cisco Catalyst 4507 Cisco 5500 Wireless Controllers Cisco Aironet Access Points .
Sep 11, 2017 · Note: Refer to the Getting Started with Cisco Commerce User Guide for detailed information on how to use common utilities for a record in Cisco Commerce. See Cisco Commerce Estimates and Configurations User Guide for more information.File Size: 664KBPage Count: 5Explore furtherSolved: Cisco Serial Number Lookups - Cisco Communitycommunity.cisco.comHow to view and/or update your CCO profilewww.cisco.comSolved: How do I associate a contract to my Cisco.com .community.cisco.comHow do I find my Cisco Contract Number? - Ciscowww.cisco.comPower calculator tool - Cisco Communitycommunity.cisco.comRecommended to you b
Apr 05, 2017 · Cisco 4G LTE and Cisco 4G LTE-Advanced Network Interface Module Installation Guide Table 1 Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Cisco 4G LTE NIM and Cisco 4G LTE-Advanced NIM SKUs Description Mode Operating Region Band NIM-4G-LTE-LA Cisco 4G LTE NIM module (LTE 2.5) for LATAM/APAC carriers. This SKU is File Size: 2MBPage Count: 18Explore furtherCisco 4G LTE Software Configuration Guide - GfK Etilizecontent.etilize.comSolved: 4G LTE Configuration - Cisco Communitycommunity.cisco.comCisco 4G LTE Software Configuration Guide - Ciscowww.cisco.comCisco 4G LTE-Advanced Configurationwww.cisco.com4G LTE Configuration - Cisco Communitycommunity.cisco.comRecommended to you b
