SHINWOO PRECISION CO.,LTD

SHINWOO PRECISION CO.,LTD

PRODUCTINTRODUCTIONLightweight TypeManual Air Edge GrinderMulti Chamfering ToolSWT-0001SPECSWT-0001MotorAir 1″Max. Output1.4PSCutting SpeedBevel radius / anglem/min : 3/1R1 R2 / 1C 2CWeight0.7kgPower (rpm)15000Average of Air4kg As an ultra-lightweight model, it is mainly used for nonferrous metal processing. Air ON / OFF opening / closing method using the handleSWT-000293 years Japan’s “NPK” GRINDER use of technologySPECMotorAir 2″Max. Output1.4PSCutting SpeedBevel radius / anglem/min : 3/1R1 R2 / 1C 2CWeight1.2kgPower (rpm)12000Average of AirROUNDINGSWT-00024kgBEVELING 155mm overall length and easy grip Compared to existing 4-inch and 7-inch models, it is light in weight and can work perfectly in narrowspaces. The height can be adjusted in 0.1mm increments, so you can work with the desired C / Rvalue.2

PRODUCTINTRODUCTIONNarrow TypeManual Air Edge GrinderSWT-0004SWT-0004(H)Narrow section workSPECSWT-0004 / SWT-0004(H)MotorAir 4″Max. Output1.4PSR2 R4 / 1C 3CWeight2.4kgPower (rpm)11000Average of Air5 6kgGuide Plate”Bevel radius / anglem/min : 3/1Clampe“RCutting SpeedFacing CutterGuide RollerSteel Plate As a model for narrow spaces,Mainly used in areas with interference Because rpm is higher than 7 inches,Reduce fatigue Compared to the same model, boasts excellent durability and power. It is equipped with automatic governor, so it does not exceed the safety rotation speed even in thechange of air pressure and flow rate, so it can work safely.Narrow Area Working Photos3

Universal TypePRODUCTINTRODUCTIONManual Air Edge GrinderSWT-0007SPECMotorAir 7″Max. Output1.4PSCutting SpeedBevel radius / angleFacing CutterPower (rpm)7600Average of Air5 6kgGuide Plate”Steel Plate Mostly used in shipyards that work for a long time. By applying exhaust cooling system exclusive for gearbox Excellent output, easy to improve processing to C4Processed picture4R2 R4 / 2C 4C2.9kgClampeThe gear life is long.m/min : 3/1Weight“RGuide RollerSWT-0007

PRODUCTINTRODUCTIONInnovative New ProductAuto Edge Milling MachineSWTAC-18NSPECSWTAC-18NMotorAir 4″Cutting SpeedProduct SizeBevel radius / anglem/min : 3/1200 220 310R2 R4 / 2C 4CPower (rpm)11000Average of Air5 6kgWeight Various machining conditions (Flat, Vertical, Overhead) can be performed. Manhole autonomous driving technology. It is mainly used for machining long corners of iron plates. Easy to use with spindle height adjustment valve. Application of magnet height adjuster; Height adjustable according to wheel wear.511kg

PRODUCTINTRODUCTIONUniversal TypeManual Electric Edge GrinderSWT-0004(E)SPECSWT-0004(E)MotorElectric 4″Max. Bevel Depth1/2″(3mm)Voltage220VBevel radiusR2 R4Bevel angle15 / 22 / 30 / 45 / 52 / 60 rpm2800 ic 5″Max. Bevel Depth1/2″(4mm)Voltage220VBevel radiusR2 R4Bevel angle15 / 22 / 30 / 45 / 52 / 60 rpmPower1700W/2200 75001700W Mainly used at work sites where air supply is not smooth. Since the rpm adjustment is possible (2800 9300), it is possible to process various kinds of steelplates. It is mainly used for non-ferrous metals and convenient for SUS processing. SWT-0004(E) products are mainly used for hole work, and SWT-0005(E) products are used for longworking because they have excellent output.6

PRODUCTINTRODUCTIONInnovative New ProductManual Electric Edge GrinderSWT-0007(U)SPECWorking PhotoMotorAir 7″Max. Output1.4PSCutting SpeedBevel radiusMachined surface Processable steel plate range (10T 30T)7m/min : 3/1R2 R4Weight4.7kgPower (rpm)7600Average of Air5 6kg Mainly used for grinding from top to bottom without steel sheet reversal Dangerous work can be safely grinded.SWT-0007(U)

Beveling onlyPRODUCTINTRODUCTIONManual Electric Edge GrinderSWT-0007(E)SWT-0007(E)Bevel Cutters15 22.5 30 37.5 45 52.5 60 SPECMotorRound CuttersR2R3R4R5R6R8Processed picture8SWT-0007(E)ElectricMax. Bevel Depth1/2″(12mm)Bevel radiusR2 / R3 / R4Bevel angle15 / 22.5 / 30 / 37.5 / 45 / 52.5 / 60 Power1600 WVoltage220VSpeed8,500 rpmWeight5.7kgTorque14Nm

BEVEL HEADINTRODUCTION

PRODUCTINTRODUCTIONMAXMAX6 6MMMMBevel head (Max 6mm)ALUALUSTEELSTEELPREMIUMPREMIUM15 15 EMIUM45-06-PREMIUM22.5 22.5 TypeType30 30 TypeType37.5 37.5 TypeType45 45 TypeType10

PRODUCTINTRODUCTIONBevel head (Max 6mm)MAX 6MMALUSTEELPREMIUM52.5 STLR4-06-ALUR4-06-PREMIUM60 11

PRODUCTINTRODUCTIONMAX 8MMBevel head (Max 8mm)ALUSTEELPREMIUM15 8-PREMIUM22.5 Type30 Type37.5 Type45 Type12

PRODUCTINTRODUCTIONBevel head (Max 8mm)MAX 8MMALUSTEELPREMIUM52.5 STLR4-08-ALUR4-08-PREMIUM60 13

PRODUCTINTRODUCTIONMAX 12MMBevel head (Max 12mm)ALUSTEELPREMIUM15 2-PREMIUM22.5 Type30 Type37.5 Type45 Type14

PRODUCTINTRODUCTIONBevel head (Max 12mm)MAX 12MMALUSTEELMAX 12MMALUSTEELPREMIUMPREMIUM52.5 Type52.5 IUM52-12-PREMIUM60 TypeType60 0-12-PREMIUM22

SHINWOO PRECISION CO.,LTD22, Ansirye-gil, Buk-gu, Ulsan, Republic of KoreaTEL : 82-52-227-0985 6   FAX : 82-52-227-0984http:// www.shinwoo-tools.com2019. 06

As an ultra-lightweight model, it is mainly used for nonferrous metal processing. Air ON / OFF opening / closing method using the handle 93 years Japan’s “NPK” GRINDER use of technology . SHINWOO PRECISION CO.,LTD 22, Ansirye-gil, Buk-gu, Ulsan, Republic of Korea