Radial Leaded Ceramic Disc Capacitors Safety Standard .
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated,AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)OverviewKEMET’s 900 Series encapsulated radial leaded ceramicdisc capacitors are specifically designed for interferencesuppression AC line filtering applications. Having internationally recognized safety certifications, these capacitorsare well-suited for applications that require keeping potentially disruptive or damaging line transients and EMI outof susceptible equipment. They are also an ideal solutionin situations where there is a need to suppress line disturbances at the source.With a working voltage of 440 VAC in line-to-line (Class X)and 300 VAC in line-to-ground (Class Y) applications, thesesafety capacitors meet the impulse test criteria outlined inIEC Standard 60384. Meeting subclass X1 and Y2 requirements, these devices are certified to withstand impulses upto 4 KV (X1) and 5 KV (Y2) respectively. These encapsulateddevices also meet the flame test requirements outlined in ULStandard 94V–0.Safety Certified Capacitors are classified as either X and/orY capacitors. Class X capacitors are primarily used in line-toline (across-the-line) applications. In this application there isno danger of electric shock to humans should the capacitorfail, but could result in a risk of fire. The class Y capacitor isprimarily used in line-to-ground (line by-pass) applications. Inthis application, failure of the capacitor could lead to dangerof electric shock.Click image above for interactive 3D contentOpen PDF in Adobe Reader for full functionalityOrdering ng1,2,4Spec.C9 Ceramic900Series0 7.0 mm1 8.0 mm2 9.0 mm3 10.0 mm4 11.0 mm6 13.0 mm8 15.0 mm7 7.5 mm1 10.0mmU Safety472MCapacitance CapacitanceCode (pF)ToleranceTwosignificantdigits andnumber ofzeroesJ 5%K 10%M 20%ZWDRated Dielectric/DesignVoltage Temp. Char.Z X1440 VAC/Y2 300VACS SLY Y5PW Y5UV Y5VD pec)A StraightB VerticalKinkC OutsideKinkD InsideKinkA e to a high risk of arcing, "Inside Kink" lead configuration cannot be combined with the 5 mm lead spacing option. The "Inside Kink" option is onlyavailable on capacitors with lead spacing of 7.5 mm or greater. A potential for arcing may exist when combining the "Inside Kink" lead configurationwith a 7.5mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage andclearance requirements.2Capacitor body diameter will limit available lead spacing and packaging options. See "Dimensions" and "Product Ordering Codes and Ratings" sectionsof this document to determine availability.3"Vertical Kink", "Outside Kink" and "Inside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm leadlength is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contactKEMET.4Bulk packaging lead length availability is dependent upon "Lead Configuration" and "Lead Spacing." See "Dimensions" section of this document toverify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET.1One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20161
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Packaging C-Spec Ordering Options TablePackaging TypeLead Length(mm)2,3PackagingOrdering Code (C-Spec)Ammo Pack20.0 1.5/ 1.0 (straight leads)18.0 2.0/ 0 (preformed leads1)7317Bulk Bag3.0 1.03.5 1.04.0 1.04.5 1.05.0 1.020.0 minimum4WL30WL35WL40WL45WL50WL20Preformed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"sections of this document for further details.2"Vertical Kink", "Outside Kink" and "Inside Kink" lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm leadlength is only available on capacitors with straight leads (lead configuration ordering code "A"). For nonstandard lead length inquiries, please contactKEMET.3For nonstandard lead length inquiries, please contact KEMET.4Lead length of 20.0 mm minimum only available for straight leads.1Benefits Safety Standard Recognized (IEC 60384–14)Reliable operation up to 125 CClass X1/Y27.5 mm and 10 mm lead spacingLead (Pb)-free and RoHS CompliantHalogen freeCapacitance offerings ranging from 10 pF up to 10 nFAvailable capacitance tolerances of 5%, 10% and 20%High reliabilityPreformed (crimped) or straight lead configurationsNon-polar device, minimizing installation concernsEncapsulation meets flammability standard UL 94V–0ApplicationsTypical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20162
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Lead ConfigurationsStraightVertical KinkTDTD3.0MaximumOutside Kink13.0Maximum5.0 MaximumLLFS5.0 MaximumLLFSTD3.0Maximum4.0 MaximumFTD3.0MaximumLLInside Kink1LLFSSDue to a high risk of arcing, the "Inside Kink" lead configuration option cannot be combined with 5 mm lead spacing ("F" dimension above). The "InsideKink" option is only available on devices with lead spacing of 7.5 mm or 10 mm.Dimensions – ing Code1StraightAVertical Kink(Preformed)BOutside Kink(Preformed)CInside .5 1.010.0 1.07.5 1.010.0 1.07.5 1.010.0 1.07.5 1.010.0 dDiameter3.0maximum0.55 0.1See Table 1 "Product Ordering Codesand Ratings"Lead Configuration is identified in the 13th character of the ordering code. See "Lead Configuration" and "Ordering Information" sections of thisdocument for further details.2Body diameter of capacitor will limit available lead spacing and packaging options. See "Product Ordering Codes and Ratings" sections of thisdocument for further details.1 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20163
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Approval Standard and Certification No.Safety StandardStandard No.VDE(ENEC)IEC 60384–14ULCAN/CSAUL 60384–14 andE60384–14SubclassWorking VoltageX1440 VACY2300 VACX1440 VACY2300 VACCertificate No.40036415E356389These devices are VDE/ENEC and UL recognized for antenna coupling and AC line-to-line (Class X) and line-to-ground (Class Y) applications perIEC60384–14 and UL 60384–14.Environmental ComplianceThese devices are Halogen free and RoHS Compliant. They meet all requirements set forth by both EU and China RoHSdirectives.General Specifications/Performance CharacteristicsDielectric/Temperature CharacteristicSLY5POperating Temperature Range:Capacitance Change with Reference to 25 Cand 0 VDC Applied (TCC):Y5V 20%/ 55% 30%/ 80% 40 C to 125 C 1,000 350 ppm/ºCDielectric Withstanding Voltage(7.5 mm and 10 mm Lead Spacing) 10%2,600 VAC(60 5 seconds at 25ºC)Quality Factor (Q)30 pF and above: 1,000Below 30 pF: 400 (20xC)*Dissipation Factor (tanδ) at 25ºC1See “Quality Factor”Insulation Resistance (IR) Limit at 25 CY5USee “Dissipation Factor”2.50%2.50%5.0%10,000 MΩ Minimum(500 VDC applied for 60 5 seconds at 25 C)*C Nominal capacitanceCapacitance and Dissipation Factor (DF) measured under the following conditions:SL: 1 MHz 100 kHz and 1.0 0.2 VrmsX5P, Y5U and Y5V: 1 kHz 50 Hz and 1.0 0.2 VrmsNote: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature knownas Automatic Level Control (ALC). The ALC feature should be switched to "ON."1 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20164
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Table 1 – Product Ordering Codes and RatingsDimensions (mm)Dielectric/Temp.Char.KEMETPart ZSD(2)A(3)10 pF12 pF15 pF18 pF20 pF22 pF24 pF27 pF30 pF33 pF36 pF39 pF47 pF50 pF51 pF56 pF62 pF68 pF75 pF82 pF100 92(1)U821KZYD(2)A(3)C92(1)U102KZYD(2)A(3)100 pF150 pF220 pF330 pF470 pF560 pF680 pF820 pF1,000 (2)A(3)C96(1)U472MZWD(2)A(3)1,000 pF1,500 pF2,200 pF3,300 pF3,900 pF4,700 98(1)U103MZVD(2)A(3)1,000 pF1,500 pF2,200 pF3,300 pF3,900 pF4,700 pF6,800 pF10,000 pF 20%KEMET Part citanceToleranceBodyDiameter(Maximum)Lead SpacingBodyThickness(Maximum)LeadDiameter5.00.55 0.17.5 mmor10 mm5.00.55 0.17.5 mmor10 mm5.00.55 0.1BulkPackagingAmmoPackaging7.0 5%8.09.010.07.0 10%8.09.07.0 20%9.011.07.5 mm or 10 mm13.07.5 mm or 10 mm10 mm only7.09.011.05.00.55 0.113.015.0Body Diameter(Maximum)7.5 mm or 10 mm7.5 mm or 10 mm10 mm onlyBody Thickness(Maximum)Lead DiameterLead Spacing(1) To properly complete ordering code, insert the one-digit numeric code to reflect required lead spacing: (Note that select capacitance values andpackaging options may limit lead spacing availability. See table above to verify availability.)7 7.5 mm1 10.0 mm(2) To properly complete ordering code, insert the one-digit character code to reflect the required lead configuration: (See "Lead Configuration" sectionof this document, page 2, for further details.)A StraightB Vertical KinkC Outside KinkD Inside Kink(3) To properly complete ordering code, enter the four-digit numeric or alphanumeric "Packaging C-Spec Ordering Code." See "Dimensions" section ofthis document, page 2, for available options. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20165
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Table 2 – Performance & Reliability: Test Methods and ConditionsItemSpecification 40ºC to 125ºCOperating Temperature RangeDielectricStrengthBetween leadwiresNo failuresBody InsulationNo failuresInsulation Resistance (IR)10,000 MΩ minimumCapacitanceWithin specified toleranceDissipation Factor (DF) or QTemperature tionY5P, Y5UDF 2.5%Y5VDF 5.0%SL 30 pF: Q 1000 30 pF: Q 400 (20 x C)C tanceChangeY5PThe capacitor shall not be damaged when 2,600 VAC(rms) isapplied between the lead wires for 60 seconds.The terminals (leads) of the capacitorshall be connected together. A metal foilis tightly wrapped around the body of thecapacitor at a distance of about 3 to 4 mmMetalaboutfrom each terminal. The capacitor is thenFoil3 to 4 mminserted into a container filled with metalballs approximately 1 mm in diameter. 2,600MetalBallsVAC(rms) is applied for 60 seconds betweenthe capacitor lead wires and metal balls.The insulation resistance shall be measured with 500 50 VDCapplied after 60 5 seconds of charging.Y5P, Y5U and Y5V: Capacitance is measured at 1 kHz 20% and 5Vrms or less. (20 2 C)SL: Capacitance is measured at 1 MHz 20% and 1.0 0.2 Vrms(25 C)A capacitance measurement is made at each step specified:StepTemperature1 20 2ºCWithin 10%2 25 2ºCY5UWithin 20%/ 55%3 20 2ºCY5VWithin 30%/ 80%4 85 2ºCSL 1,000 350ppmºC( 20ºC 85ºC)5 20 2ºCTensileLead wire or capacitor body shall notbreak.BendingLead wire or capacitor body shall notbreak.TerminalStrength1Test MethodPre-treatment:Capacitor is stored at 85 2ºC for 1 hour and then placed at roomcondition1 for 24 2 hours before measurement.With the termination in its normal position, the specimen is heldby its body in such a manner that the axis of the termination isvertical; a tensile force of 10 N is applied to the termination in thedirection of its axis and acting in a direction away from the bodyof the specimen.With the termination in its normal position, the specimen is heldby its body in such a manner that the axis of the termination isvertical; a mass force of 5 N is then suspended from the end ofthe termination. The body of the specimen is then inclined withina period of 2 to 3 seconds, through an angle of approximately 90 in the vertical plane and then resumed to its initial position overthe same period of time; this operation constitutes one bend.One bend immediately followed by a second bend in the oppositedirection.“Room Condition” is defined as follows: Temperature: 15 35 C/Humidity: 45 75%/Atmospheric Pressure: 86 106 kPa. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20166
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Table 2 – Performance & Reliability: Test Methods and Conditions cont'dItemSpecificationLead wire should have a uniform coatingof solder in the axial direction and over3/4 of its circumference.SolderabilityAppearanceNo visual defectIRDielectricStrength1,000 MΩPer item 1ThermalScreenSoldering Effect(Non-Preheat)CapacitanceY5P, Y5U and Y5V: Within 10%SL: Within 2.5% or 0.25 pF, whicheveris larger.AppearanceIRDielectricStrengthNo visual defect1,000 MΩPer item 1CapacitanceY5P, Y5U and Y5V: Within 10%SL: Within 2.5% or 0.25 pF, whicheveris larger.AppearanceNo visual defectCapacitanceBiased risticsCapacitanceChangeY5PWithin 10%Y5UWithin 20%Y5VWithin 30%SLWithin 2.5% or 0.25 pF, whicheveris larger.Y5P and Y5U: 5.0% maximumY5V: 7.5% maximumSL: Less than 30 pF:Q 100 10 C/3More than 30 pF: Q 200C Nominal capacitanceY5P, Y5V and Y5U: 3,000 MΩ minimumSL: 1,000 MΩ minimumCapacitor1.5 to2.0 mmMoltenSolderPre-treatment: Capacitor is stored at 85 C 2 C for 1 hour andthen placed at room condition1 for 24 2 hours before initialmeasurements.Post-treatment: Capacitor is stored for 1 to 2 hours at roomcondition1.Capacitor is stored at 120 C 0/ 5 C for 60 0/ 5 seconds.Then, as shown in the figure below, the lead wires are immersedin molten solder up to 1.5 mm ( 5/-0mm) from the end of theepoxy meniscus (root of lead wire).Duration/Solder Temperature: 7.5 0/ 1 seconds/260 C 5 CThermalScreenSoldering Effect(Preheat)1Test MethodThe lead wire of the capacitor is dipped into molten solder for5 0.5 seconds. The depth of immersion is up to 1.5 mm( 5/ 0 mm) from the root of lead wires.Solder Temperature: Lead free solder (Sn-3Ag – 0.5Cu)245 C 5 C.As shown in the figure below, the lead wires are immersed inmolten solder up to 1.5 mm ( 5/ 0 mm) from the end of theepoxy meniscus (root of lead wire).Duration/Solder Temperature: 3.5 0.5 seconds/350 C 10 C or10 1 seconds/260 C 5 CCapacitor1.5 to2.0 mmMoltenSolderPre-treatment: Capacitor is stored at 85 C 2 C for 1 hour andthen placed at room condition1 for 24 2 hours before initialmeasurements.Post-treatment: Capacitor is stored for 1 to 2 hours at roomcondition1.Steady State Humidity:Load Humidity:90 to 95% humidity at 40 C 2 C for 500 12 hours.90 to 95% humidity at 40 C 2 C for 500 12 hours withfull rated voltage applied.Post Treatment:Capacitor is stored for 1 to 2hours at room condition1.Post Treatment:Capacitor is stored for 1 to 2hours at room condition1.No failures“Room Condition” is defined as follows: Temperature: 15 35 C/Humidity: 45 75%/Atmospheric Pressure: 86 106 kPa. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20167
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Table 2 – Performance & Reliability: Test Methods and Conditions LifeSpecificationTest MethodNo visual defectImpulse Voltage: Each individual capacitor is subjected to three 5kv impulses prior to life testing.Y5P, Y5V and Y5U: Within 20%SL: Within 3 or 0.3 pF,whichever is larger.3,000 MΩ minimumSL: 1,000 MΩ minimumU PPNo failuresThe capacitor flame extinguishes asfollows:CycleTime1 430 secondsmaximum560 lame Test0.9VpCx tr(uF) (uS)0.01 1.20.1 1.5U PRVpVoltageItemTimetdCapacitors are placed in a circulating air oven for a period of1,000 hours. The air in the oven is maintained at a temperature of125 C 2 throughout the test. The capacitors are subjected to AC510 Vrms. Each hour the voltage is increased to 1,000 Vrms for0.1 seconds.The capacitor is exposed to a flame for 15 seconds and thenremoved for 15 seconds. This test is repeated for 5 cycles.CapacitorFlame7638127Gas Burner20º(Unit:mm)The capacitors are individually wrapped in at least one, but notmore than two, complete layers of cheesecloth. They are thensubjected to 20 discharges. The interval between successivedischarges is 5 seconds. The VAC is maintained for 2 minutesafter the last discharge.FS1TrC1S2 VacL1L2C2L3C3L4RCXCtVtOscilloscopeActive FlammabilityThe cheesecloth should not ignite.C1, 21 μF 10%C30.033 μF 5% 10 kVL1-41.5 Mh 20% 16A Rod core chokeCxTest capacitorR100 2%VACVR 5%Ct3 μF 5% 10 kVVRRated VoltageFFuse, Rated 10AVtVoltage applied to CtVx5kVtime1“Room Condition” is defined as follows: Temperature: 15 35 C/Humidity: 45 75%/Atmospheric Pressure: 86 106 kPa. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.comC1065 X1 440 VAC Y2 300 VAC 10/11/20168
Radial Leaded Ceramic Disc CapacitorsSafety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade)Table 2 – Performance & Reliability: Test Methods and Conditions cont'dItemSpecificationTest MethodThe capacitor under test is held into a flame and in a positionwhich best promotes burning. Each specimen is exposed to theflame one time.Passive FlammabilityAbout 8mmThe burning time should not exceed 30seconds.The tissue paper should not ignite.Test Specimen20045º 5mmTissueAbout 10mmThick BoardTime of exposure to flame:Length of flame:Gas burner length:Inside diameter:Outside diameter:Gas butane gas purity:AppearanceCapacitanceTemperatureCycleNo visual LWit
Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, 900 Series, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Ordering Information C9 7 1 U 472 M Z W D A A 7317 Ceramic Series Body Diameter Lead Spacing1,2,4 Spec. Capacitance Code (pF) Capacitance Tolerance Rated Voltage Dielectric/ Temp. Char. Design Lead Config .
PHILIPS FW-C577 Philips Consumer Electronics North America P.O.Box 14810 Knoxville, TN 37914-1810 Phone no.: 1-800-531-0039. 3 P3 DISC 5 DISC 5 DISC 1 DISC 1 D 2 DISC 2 DISC 3 DISC D 4 DISC 4 DISC DISC 3 DISC4 DISC DISC DISC 5 DISC DISC 2 DISC 1 CD/C -R CD-R-W W OMPATIBLE TIBLE ST
Safety Standard Certified Lead Type Disc Ceramic Capacitors for Automotive Type KJ -Class X1, Y2- (For Automotive Use/AC Line Filter of PHEV/EV Charger) p59 Type KJ Specifications and Test Methods p60 Characteristics Data (Typical Example) p64 Packaging p65!Caution p66 Notice p69 Lead Type Disc Ceramic Capacitors (Safety Certified)/
sliding velocity. Friction coefficients are very high for the ceramic/ceramic pair beginning at 0.60 -4-0.10 (very erratic) at room temperature and steadily increasing with temperature to above 1.0 at 900 C. The friction coefficient for the ceramic/metal pair is about the same as that of the ceramic/ceramic pair at
AC polymeric film capacitors can be used on both circuits but using AC film capacitors for DC circuits would increase the size and cost of a UPS system. As a result, DC electrolytic capacitors are used in the DC circuit and The difference between service life and AC polymeric film capacitors are used in reliability will be discussed in section 7.
Demos: Descriptions, Process and Teaching Points 31 Disc 1 Pavitar 32 Disc 2 Cheryl 33 Disc 4 Amara 33 Disc 5 Masti 35 Disc 6 Nirala 37 Disc 7 Coral 39 Disc 8 Sam 40 Disc 9 Sahaja 41 Disc 10
KEMET’s 900 encapsulated radial leaded ceramic disc capacitors are specifically designed for interference-sup-pression AC line filtering applications. Having internation-ally recognized safety certifications, these capacitors are well-suited for applications that require keeping potentially
Radial Leaded Ceramic Disc Capacitors Safet Standard Recognized, C700, Encapsulated, KJY Type, 1 400 AC/Y2 250 AC Industrial rade) Ordering Information. C7 8 1 U 103 M Y V D A A 7301. Ceramic Series Body Diameter Lead Spacing. 1,2,4. Spec. Capacitance Code (pF) Capacitance Tolerance Rated Voltage Dielectric/ Temp. Char. Design Lead .
López Austin, Alfredo, “El núcleo duro, la cosmovisión y la tradición mesoamericana”, en . Cosmovisión, ritual e identidad de los pueblos indígenas de México, Johanna Broda y Féliz Báez-Jorge (coords.), México, Consejo Nacional para la Cultura y las Artes y Fondo de Cultura Económica, 2001, p. 47-65. López Austin, Alfredo, Breve historia de la tradición religiosa mesoamericana .
