AWS-American Welding Society - موسسه هرکولس
Standards Manager Web Standards ListAWS-American Welding B2.1-8-310TitleStandard Welding Terms and Definitions - Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting,and Thermal SprayingStructural Welding CodeSafety Guidelines for Proper Selection of Welding CablesSpecification for AWS Certification of Resistance Welding TechniciansSpecification for Carbon and Low-Alloy Steel Electrodes for Electrogas WeldingSpecification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc WeldingSPECIFICATION FOR FLUX AND ELECTRODE COMBINATIONS FOR SUBMERGED ARC AND ELECTROSLAGJOINING AND SURFACING OF STAINLESS STEEL AND NICKEL ALLOYSSpecification for the Ultrasonic Pulse-Echo Examination of Brazed JointsSpecification for Resistance BrazingBridge Welding CodeSpecification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) ApplicationsStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of CarbonSteel (S-1) to Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-309 ER309L, in theAs-Welded Condition,Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of CarbonSteel (S-1) to Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL- 309-XX and MIL309L-XX, in the As-WelStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding Followed byShielded Metal Arc Welding of Carbon Steel (S-1) to Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch[38 mm] Thick, MIL-3Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2), 3/16 inch [5 mm] through 3/4 inch [19 mm] Thick, E7016 and E7018, in the As-Welded Condition, Primarily Plate andStructural ApplicatioStandard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2), 3/16 inch [5 mm] through 7/8 inch [22 mm] Thick, ER70S-2 and ER70S-3, in the As-Welded Condition, Primarily Plateand Structural ApplicatStandard Welding Procedure Specification (SWPS) for 75% Argon Plus 25% Carbon Dioxide Shielded Gas Metal ArcWelding (Short Circuiting Transfer Mode) followed by 75% Argon Plus 25% Carbon Dioxide Shielded Flux Cored ArcWelding of Carbon SteelStandard Welding Procedure Specification (SWPS) for 75% Argon Plus 25% Carbon Dioxide Shielded Gas Metal ArcWelding (Short Circuiting Transfer Mode) followed by 98% Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding(Spray Transfer Mode) of Carbon SteelStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding Followed byShielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2 andMIL- 7018-M, in the As-WeldStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding Followed byShielded Metal Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2 andMIL-7018-M, in the As-WeldeStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding Followed byShielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL3XX and MIL-3XX-XX, inYear Organization2020 2020AWS2020AWS2020AWS2020AWS2020AWS2020AWS2020AWS
2.1-1-20952D17.2/D17.2MStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding Followed byShielded Metal Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL3XX and MIL-3XX-XX, inGuide to Installation and Maintenance of Resistance Welding MachinesStandard Symbols for Welding, Brazing, and Nondestructive ExaminationStandard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and DuplexFerritic-Austenitic Stainless Steel Weld MetalStandard Methods for Classification Testing of Positional Capacity and Root Penetration ofWelding Consumables in aFilletWeldStandard Method for Evaluation of Brazed Joints Using Visual andMetallographic TechniquesSpecification for the Design of Welded Joints in Machinery and EquipmentSpecification for Use and Performance of Transparent Welding Curtains and ScreensSpecification for Classification of Weld-Through Paint PrimersSpecification for Welding Earthmoving and Construction EquipmentRailroad Welding Specification for Cars and LocomotivesSpecification for Fabrication of Metal Components using Additive ManufacturingGuide for the Joining of Solid Solution Austenitic Stainless SteelsRecommended Practices for Resistance WeldingSpecification for the Qualification of Resistance Welding TechniciansStandard Method for Evaluating the Strength of Brazed JointsBridge Welding Code - 7th Edition; Interim RevisionWelding Consumables Procurement of Filler Metals and FluxesSpecification for Filler Metals for Brazing and Braze WeldingSpecification for Carbon Steel Electrodes and Fluxes for Submerged Arc WeldingSpecification for Nickel-Alloy Electrodes for Flux Cored ArcWeldingStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical UphillStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical UphiStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition (Primarily PiStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical UpStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical UphiStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical UpStandard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition (Primarily Pipe ApplStandard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition (Primarily Pipe AppliStandard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal ArcWelding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018,Specification for Resistance Welding for Aerospace Applications - 3rd 019AWS02019AWS02019AWS02019AWS02019AWS02019AWS00
53B2.1-1-0265455F3.2NAVSEA B2.11-30156B2.1-8-02357NAVSEA EA 31678B2.1-1-022Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Downhill) Followed by E7018, in the As-Welded orPWHT Condition, PrimaVentilation Guide for Weld Fume - 2nd EditionStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of CarbonSteel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition,Primarily Plate and Structural NaStandard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8Group 1) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, in the As-Welded Condition, Primarily Plate and StructuralApplications - 2ndStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of CarbonSteel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70S-2, in the As-Welded or PWHT Condition,Primarily Pipe for Naval ApplicatBridge Welding Code - 7th Edition; Interim RevisionSpecification for Robot Arc Welding Training and Testing Cell - 1st EditionSpecification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding - 9th EditionStandard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E7018, in the As-Welded or PWHT Condition, Primarily Plate andStructural ApplicationsSpecification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc WeldingSpecification for Nickel and Nickel-Alloy Bare Welding Electrodes and RodsStandard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S1, Group 1 or 2), 1/8 Through 1/2 Inch Thick, E71T-11, As-Welded Condition Site LicenseSpecification for the Qualification of Welding Inspector Specialists and Welding Inspector AssistantsRecommended Practices for Safe Oxyfuel Gas Heating Torch Operation - Third EditionNULLSheet Metal Welding CodeGuide forWelding Ferritic/Austenitic Duplex Stainless Steel Piping andTubingMethod for Sampling Airborne Particulates Generated by Welding and Allied ProcessesVentilation Guide for Weld FumeStandard Welding Procedure Specification for Naval Applications (SWPS-N) for 75% Argon Plus 25% Carbon DioxideShielded Flux Cored Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1and MIL-71T-1, in the As-WeldSpecification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys andComposites for the Corrosion Protection of Steel - 2nd EditionStandard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding Followed by Shielded Metal ArcWelding of Carbon Steel (M-1/P-1, Group 1 or 2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, ER70S-2 and E7018,in the As-Welded or PWHT CondiStandard Welding Procedure Specification for Naval Applications (SWPS-N) for Argon Plus 2% Oxygen Shielded GasMetal Arc Welding (Spray Transfer Mode) of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick,MIL-70S-3, in the As-Welded orStandard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Uphill) Followed by E7018, in the As-Welded orPWHT Condition, 018AWS02018AWS0
2103NAVSEA B2.1- Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of8-309Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX-XX, in the As-WeldedCondition, Primarily Plate and StruB2.1-1-317Standard Welding Procedure Specification for Naval Applications (SWPS-N) for 75% Argon Plus 25% Carbon DioxideShielded Flux Cored Arc Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1and MIL-71T-1, in the As-WeldNAVSEA B2.1- Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Shielded Metal Arc Welding of8-319Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX-XX, in the As-WeldedCondition, Primarily Pipe for NavalB2.1-1-314Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding withConsumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL70S-2B2.1-1-315Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding withConsumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL70S-2B2.1-8-321Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding withConsumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX,in the As-Welded ConditionB2.1-8-322Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding withConsumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX,in the As-Welded ConditionB2.3/B2.3MSpecification for Soldering Procedure and Performance Qualification - 3rd EditionB2.1-1-017Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or2) 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010, in the As-Welded or PWHT Condition, Primarily Plate andStructural ApplicationsD1.4/D1.4MStructural Welding Code - Steel Reinforcing Bars - 8th EditionB2.1-1-019Standard Welding Procedure Specification (SWPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1,Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E70T-1C and E71 T-1C, in the As-Welded Condition,Primarily Plate and StructNAVSEA B2.1- Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Carbon Dioxide Shielded Flux Cored Arc1-304Welding of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-70T-1 and MIL-71T-1, in the AsWelded Condition, PrimaD16.1M/D16.1 Specification for Robotic Arc Welding Safety - 2nd EditionB2.1-1-020Standard Welding Procedure Specification (SWPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of CarbonSteel (M-1/P-1, Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E70T-1M and E71T-1M, in the AsWelded or PWHT Condition, PrimarilQC10Specification for Qualification and Certification for Entry Level WeldersC3.12M/C3.12C4.2/C4.2MRecommended Practices for Safe Oxyfuel Gas Cutting Torch OperationC7.4/C7.4MProcess Specification and Operator Qualification for Laser Beam WeldingC7.6/C7.6MD1.6/D1.6MStructural Welding Code - Stainless SteelD3.6MSpecification for Underwater WeldingD8.2MD8.14MSpecification for Automotive Weld Qualityù Arc Welding of AluminumD14.1/D14.1M Specification for Welding of Industrial and Mill Cranes and Other Material Handling EquipmentAMD 1D16.3M/D16.3 Risk Assessment Guide for Robotic Arc 017AWS0
C2.20/C2.20MC3.5MC3.5AMD 4C3.5MC3.5C3.6MC3.6D1.1D1.1MERTA 2D1.8D1.8MD17.3D17.3MJ1.2MJ1.2QC1NAVSEA B2.11-302NAVSEA B2.11-312D16.4MD16.4Guide for The Training and Qualification of Welding Personnel Entry Level WelderGuide for The Training and Qualification of Welding Personnel Entry Level Welder20172017AWSAWS00Guide for Estimating Welding Emissions for EPA and Ventilation Permit ReportingRecommended Safe Practices for the Preparation for Welding and Cutting of Containers and PipingSpecification for Bare Stainless Steel Welding Electrodes and RodsSpecification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and RodsSpecification for Carbon Steel Electrodes and Rods for Gas Shielded Arc WeldingCode Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities - ReferenceManualSpecification for Resistance Welding of Carbon and Low-Alloy SteelsGuide for Thermal-Spray Operator QualificationSpecificatiopn for Thermal Spraying Zinc Anodes on Steel Reinforced SAWS0000002017201720162016AWSAWSAWSAWS0000Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic WeldsMetric Practice Guide for the Welding IndustryNULLNULLNULLStandard Methods for Mechanical Testing of 000000000000000NULLNULLNULLStandard for AWS Certification of Welding 0000NULL2015AWS0NULL2015AWS0Specification for Torch BrazingSpecification for Induction BrazingSpecification for Furnace BrazingProcess Specification for Electron Beam WeldingSpecification for Friction Stir Welding of Aluminum Alloys for Aerospace Applications
74175176D18.3D18.3MD1.9D1.9MD1.5MD1.5D1.1 CCRMBUNDLE ABUNDLE BBUNDLE 1B2.1B2.1MERTA 1B1.11M/B1.11B2.1-1/8-010NULLNULLNULLCODE CLINIC For Study of AWS D1.1/D1.1M: 2010 Structural Welding 0132013AWSAWSAWSAWSAWSAWSAWS0000000Guide for the Visual Examination of WeldsStandard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1) to AusteniticStainless Steel (M-8/ P-8), 18 through 10 Gauge, in the As-Welded Condition, with or without Backing - 3rd EditionD1.1/D1.1MStructural Welding Code - Steel - 23rd EditionWHB-5.9Welding Handbook Volume 5 - ALUMINUM AND ALUMINUM ALLOYS, Part 2WIWelding Inspection Handbook - Fourth EditionA5.24/A5.24M Zirconium and Zirconium Alloy Welding Electrodes and RodsD8.8MSpecification for Automotive Weld Quality - Arc Welding of SteelB2.1B2.1MNULLBMGA5.5/A5.5MSpecification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding - 10th EditionB2.1/B2.1MSpecification for Welding Procedure and Performance Qualification - Sixth EditionB5.17Specification for the Qualification of Welding Fabricators - Fourth EditionD1.2/D1.2MStructural Welding Code-Aluminum - 6th EditionERTAD1.2/D1.2MStructural Welding Code-Aluminum - 6th EditionG2.4/G2.4MGuide for the Fusion Welding of Titanium and Titanium AlloysJ1.1M/J1.1Specification for Resistance Weldi
3 F4.2 Safety Guidelines for Proper Selection of Welding Cables 2020 AWS 4 QC20 Specification for AWS Certification of Resistance Welding Technicians 2020 AWS 5 A5.26/A5.26M Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding 2020 AWS
4 AWS Training & Services AWS Essentials Training AWS Cloud Practitioner Essentials (CP-ESS) AWS Technical Essentials (AWSE) AWS Business Essentials (AWSBE) AWS Security Essentials (SEC-ESS) AWS System Architecture Training Architecting on AWS (AWSA) Advanced Architecting on AWS (AWSAA) Architecting on AWS - Accelerator (ARCH-AX) AWS Development Training
AWS A2.4, Standard Symbols for Welding, Brazing, and Nondestructive Examination AWS A3.0, Standard Welding Terms and Definitions AWS B2.1, Specification for Welding Procedure and Performance Qualification AWS B5.1, Specification for the Qualification of Welding Inspectors AWS QC1 Standard for AWS Certification of Welding Inspectors
AWS SDK for JavaScript AWS SDK for JavaScript code examples AWS SDK for .NET AWS SDK for .NET code examples AWS SDK for PHP AWS SDK for PHP code examples AWS SDK for Python (Boto3) AWS SDK for Python (Boto3) code examples AWS SDK for Ruby AWS SDK for Ruby co
AWS TSD 1.1:2011, Specification for the Preparation of American Welding Society Standards, for implementation in the development of all AWS American National Standard (ANSI) standards as well as other standards developed by AWS. The Specification for the Preparation of American Welding Society Standards is a compilation of
1. Bolts and nuts - ASTM A307 2. Washers - ANSI B27.2 F. Anchor bolts: F1554 (Grade 36) G. High strength threaded fasteners: 1. ASTM A325 2. ASTM A490 H. Filler metals for welding: 1. Shielded Metal-Arc Welding - AWS A5.1 or 5.5 and AWS Code. 2. Submerged ARC Welding - AWS A5.17 and AWS Code. 3. Flux-cored Arc Welding - AWS A5.20 and AWS Code. 4.
AWS Directory Amazon Aurora R5 instance Service AWS Server Migration Service AWS Snowball AWS Deep Amazon GameLift Learning AMIs AWS CodeBuild AWS CodeDeploy AWS Database Migration Service Amazon Polly 26 26 20 40 12 0 5 10 15 20 25 30 35 40 45 2018 Q1 2018 Q2 2018 Q3 2018 Q4 2019 Q1 New Services& Features on AWS
AWS instances with Nessus while in development and operations, before publishing to AWS users. Tenable Network Security offers two products on the AWS environment: Nessus for AWS is a Nessus Enterprise instance already available in the AWS Marketplace. Tenable Nessus for AWS provides pre-authorized scanning in the AWS cloud via AWS instance ID.
The SBSS-prepared A02 and A0B MILS transactions carry the expanded length descriptive data, which could contain various types of information for part-numbered requisitions in rp 67-80, and requires mapping to the DLMS transaction. This information is common to the YRZ exception data used by DLA, and so can be mapped to the generic note field as specified above. b. DLMS Field Length .
