Speaks In 4 Languages - Prodigy Diabetes Care
Speaks in4 Languages
AutoCode Blood Glucose MeterDear Prodigy AutoCode Meter Owner:Thank you for choosing the Prodigy AutoCode as yourblood glucose monitoring system. Please read thismanual carefully as it contains important informationabout your new Prodigy AutoCode system.The Prodigy AutoCode meter has the latest technology for blood glucose monitoring and is made withquality components. It is easy to use, provides fast testresults with a minimal sample of blood, has a large,easy-to-read display screen, and is lightweight andportable for your convenience.The Prodigy AutoCode meter is designed to help youand your healthcare professionals monitor your bloodglucose levels. This Owner’s Manual will help you learnhow to use your Prodigy AutoCode meter effectively.A warranty registration card is included with yoursystem. Please return the completed card to us, complete the warranty online at www.prodigymeter.com,or call Customer Care to register your Prodigy AutoCode meter. Customer Care is available by calling1.800.243.2636 Monday - Friday 8:30AM to 5:30PM(EST). All questions concerning test results should bedirected to your healthcare professional.Owner’s Manual2
AutoCode Blood Glucose MeterProdigy AutoCode meters: Require No Coding, allowing you to save timeand decreases the chances of human error dueto improper coding. Allow you to perform Alternate Site Testing (AST). Have memory and data management capabilities.Prodigy’s Diabetes Management software gives youand your healthcare professional, powerful graphictools to manage your diabetes.Owner’s Manual3
AutoCode Blood Glucose MeterTable of ContentsLetter to Meter Owner.2-3Table of Contents.4-5Important Safety Instructions.6-9Important Health-Related Information. 10Alternate Site Testing (AST). 11-12Introduction to Prodigy AutoCode Meters. 13-14Intended Use. 13Test Principle. 13-14About Prodigy No Coding Blood Glucose Test Strips. 14-16Key Functions of the Test Strip. 14-15Important Test Strip Information. 15-16Contents of the Prodigy AutoCode Meter. 17Setting up the Prodigy AutoCode Meter. 18-27Key Functions. 18Meter Display. 19-20Speaking Function. 21Setup Steps. 22-27Control Solution Testing. 28-34Performing a Control Solution Test. 31-34Performing a Blood Glucose Test. 35-44Preparing the Lancing Device. 35-36Getting a Blood Sample. 37-38Tips for Applying Blood Without Sight. 39-41Applying Blood to the Test Strip. 42-44Owner’s Manual4
AutoCode Blood Glucose MeterTable of ContentsUsing the Meter Memory. 45-47Viewing Results on a Personal Computer. 47Specifications. 48Caring for your Prodigy AutoCode Meter. 49-54Cleaning your System. 50-51Lancing Device. 51Disinfecting your System. 51-52Storing your System. 52Battery. 53Low Battery. 53Battery Replacement. 54System Troubleshooting. 55-61Special Messages. 55-56Error Messages. 56-57Troubleshooting Guide. 58-61Information About your Prodigy AutoCode Meter. 62-71Comparing Meter and Laboratory Results. 62-63Performance Characteristics. 64-65Expected Test Results. 66Unexpected Test Results. 67-68Accuracy of Meter Measurements. 69-71Symbol Information. 72Warranty Information. 73Limited Lifetime Warranty. 73Owner’s Manual5
AutoCode Blood Glucose MeterImportant Safety InstructionsREAD ALL INSTRUCTIONS THOROUGHLY BEFORE USING.The following basic safety precautions should alwaysbe taken. Close supervision is necessary when the device is usedby, on, or near children and handicapped persons. Use the device only as described in this manual. Use only Prodigy No Coding Blood Glucose TestStrips and Prodigy Control Solution with your ProdigyAutoCode meter. Using other test strips and controlsolutions with this meter can produce inaccurate results. Do not use the device if it has suffered any damagesor if it appears to not be working properly. Keep the test strip vial away from children; the vial capand test strips can be a potential choking hazard. Never chew or swallow a test strip. If this occurs, seekmedical assistance immediately. All parts of the system are considered biohazardousand can potentially transmit infectious diseases, evenafter cleaning and disinfection.Owner’s Manual6
AutoCode Blood Glucose MeterImportant Safety Instructions The device is intended for patient over-the-counteruse to self-monitor blood glucose. It should not beused to collect blood from more than one person. The meter and lancing device are for single patientuse. Do not share them with anyone including otherfamily members! Do not use on multiple patients! To reduce the risk of electromagnetic interference,DO NOT use this meter near cellular and cordlesstelephones, intercom systems, electric garage gates,radio transmitters and other electrical or electricalequipment that are sources of electromagnetic radiation, which may interfere with the meter’s operation.For further information, please refer to:FDA Public Health Notification: Use of FingerstickDevices on More Than One Person Poses Risk ation (2010) Notices/ucm224025.htmCDC Clinical Reminder: Use of Fingerstick Deviceson More than One Person Poses Risk for TransmittingBloodborne Pathogens ck-DevicesBGM.htmlOwner’s Manual7
AutoCode Blood Glucose MeterDO NOT CHANGE YOUR TREATMENT BASED ONA SINGLE RESULT THAT DOES NOT MATCH WITHHOW YOU FEEL, OR IF YOU BELIEVE THAT YOURTEST RESULT COULD BE INACCURATE.LimitationsHematocrit: Hematocrit levels below 20% or above 60%can cause false results. Please consult your healthcareprofessional if you do not know your hematocrit level.For self-testing only.For in vitro diagnostic use only.Do not share your Prodigy AutoCode meter, test strips,lancets and lancing device with anyone, including otherfamily members.Do not use on multiple patients.The system should NOT be used for the diagnosis of orscreening for diabetes.The system should NOT be used in neonates.The system should NOT be used on critically ill patients.Not for use on patients who are dehydrated,hypotensive, in shock or in a hyperosmolar state.Owner’s Manual8
AutoCode Blood Glucose MeterAlternate Site Testing results should NOT be usedfor calibrating CGMs or for insulin dosing calculations when glucose levels may be rapidly changing orfluctuating, such as after meals or exercise, or after taking insulin.Do not use the Prodigy AutoCode Blood Glucose Monitoring System during or after a Xylose Absorption Test.This may falsely raise glucose results. Please check withyour Doctor before using the Prodigy AutoCode BloodGlucose Monitoring System.The system exhibits interference from Acetaminophen,ascorbic acid and Ibuprofen. If you are taking acetaminophen containing drugs (Tylenol, etc., 8.0 mg/dL in your blood), or ibuprofen containing drugs (Advil,etc., 50.0 mg/dL in your blood) or vitamin C (ascorbic acid, 5.0 mg/dL in your blood), you may obtaininaccurate readings from this blood glucose monitoringsystem. Please check with your doctor before using theProdigy Autocode Blood Glucose Monitoring System.High uric acid concentrations ( 8 mg/dL in your blood)may interfere with the glucose measurements withthis device. If you have medical conditions that areassociated with high uric acid level or hyperuricemia (e.g. gout), then please check with your Doctorbefore using the Prodigy AutoCode Blood GlucoseMonitoring System.Owner’s Manual9
AutoCode Blood Glucose MeterImportant Health-Related InformationSevere dehydration and excessive water loss maycause false low results. If you believe you are sufferingfrom severe dehydration, consult with a healthcare professional immediately.If you are experiencing symptoms that are notconsistent with your blood glucose test results andyou have followed all instructions described in this owner’s manual, contact your healthcare professional.Test results below 60 mg/dL (3.3 mmol/L) indicate lowblood glucose (hypoglycemia).Test results greater than 240 mg/dL (13.3 mmol/L) indicate high blood glucose (hyperglycemia).If your test result is below 60 mg/dL or above 240 mg/dL, repeat the test, and if the result is still below 60 mg/dL (3.3 mmol/L) or above 240 mg/dL (13.3 mmol/L),consult with your healthcare professional immediately.Inaccurate results may occur in severely hypotensive individuals, individuals in shock, and in thoseexperiencing a hyperglycemic-hyperosmolar state.Please refer to the test strip package insert foradditional important information.Owner’s Manual10
AutoCode Blood Glucose MeterAlternate Site TestingThere are important limitations to performing AST.Consult with your healthcare professional before testingwith a blood sample obtained from AST locations.What is AST?Alternate Site Testing (AST)means you can use parts of thebody other than your fingertipsto check your blood glucoselevels. The system allows youto test from the palm, forearm,upper arm, calf or thigh, withequivalent results to fingertiptesting.What is the advantage?Fingertips feel pain morereadily because they are fullof nerve endings (receptors).At other body sites, nerveendings are not so numerousand you will not feel as muchpain as you will experience atthe fingertip.Owner’s ManualFigure 111
AutoCode Blood Glucose MeterWhen to use AST?Food, medication, illness, stress and exercise can affectblood glucose levels. Capillary blood at fingertip reflects these changes faster than capillary blood at othersites. Therefore, if you are testing blood glucose levelsduring or immediately after a meal, physical exercise orstressful event, take the blood sample from your fingertip only.Use AST only: In a pre-meal or fasting state (more than 2 hours afterthe last meal). Two hours or more after taking insulin. Two hours or more after exercise. During steady state blood glucose conditions.Do NOT use AST if:1. You have reason to believe you have hypoglycemiaor hyperglycemia.2. Your routine glucose results are often fluctuating.Owner’s Manual12
AutoCode Blood Glucose MeterIntroduction to Prodigy AutoCode MetersIntended UseThe Prodigy AutoCode Blood Glucose MonitoringSystem is intended to be used for the quantitativemeasurement of glucose (sugar) in fresh capillarywhole blood samples drawn from the fingertips,forearm, upper arm, palm, calf or thigh.The system is intended for self-testing outside thebody (in vitro diagnostic use) by people with diabetesand is an at-home aid to monitor the effectiveness ofdiabetes control. It should not be used for the diagnosis or screening of diabetes or for neonatal use.Test PrincipleBlood glucose is measured by an electrical currentthat is produced when a blood sample mixes withthe reagent (special chemicals) of the test strip. Theelectrical current changes with the amount of glucosein the blood sample. The Prodigy AutoCode metermeasures the strength of the electrical current, calculates the blood glucose level and then displays theresult in milligrams per deciliter (mg/dL) or millimolesper liter (mmol/L). (USA standard: mg/dL)Owner’s Manual13
AutoCode Blood Glucose MeterThe Prodigy AutoCode meter, test strips and controlsolution has been designed, tested and is proven towork together as a system to produce accurate bloodglucose test results.Important:Use only Prodigy No Coding Blood Glucose Test Stripsand Prodigy Control Solution with your Prodigy AutoCode meter. Using other test strips and control solutions with thismeter can produce inaccurate results.About Prodigy No Coding Blood Glucose Test StripsKey Functions of the Test StripThe Prodigy AutoCode meter measures the amountof sugar in the blood, commonly referred to as bloodglucose. Blood is applied to the opening of theabsorbent channel on the end of the test strip andis automatically drawn into the test strip.Owner’s Manual14
AutoCode Blood Glucose Meter2134P R O D I G Y 1. Absorbent Channel: Apply a drop of blood here.2. Confirmation Window: To confirm if enough bloodis applied or has been drawn into the strip.3. Test Strip Handle: Hold this part to insert the test stripinto the test strip slot.4. Contact Bar: Insert this end into the test strip slot.Please refer to the “Performing a Blood Glucose Test”section for complete instructions.Important Test Strip Information Store test strip packages in a cool, dry placebetween 39.2 F–104 F (4 C–40 C) and 10-85% relative humidity. Do not freeze. Keep away from direct sunlight and heat.(Do not store in your car.) Store your test strips in their original vial only. Do nottransfer them to a new vial or any other container.Owner’s Manual15
AutoCode Blood Glucose Meter Close the test strip’s vial lid immediately afterremoving a strip, and use each strip promptly. With clean, dry hands you may touch the test stripanywhere on its surface when removing it from thevial or inserting it into the meter. Wash the test site thoroughly with soap and water. Record the discard date on the vial label when youfirst open it. Discard remaining test strips 90 days after the first opening date. Do not use test strips beyond the expiration dateprinted on the package. After removing the test strip from the vial, insert it directly into the meter. Do not lay the test strip on anyother surface.Warning: Keep the test strip vial away from children; the vial cap and the test strips can be a potential choking hazard. Never chew or swallowa test strip. If this occurs, please seek medicalassistance immediately.Owner’s Manual16
AutoCode Blood Glucose MeterContents of the Prodigy AutoCode MeterPlease review the contents of your purchase to confirmthat all the components are included as listed on theside of your meter box.You will need the following items to test your blood glucose levels:1.2.3.4.5.Prodigy AutoCode Blood Glucose MeterProdigy No Coding Blood Glucose Test StripsLancetsLancing DeviceProdigy Control SolutionIf any item is not included in the box, pleasepurchase it separately. Please contact CustomerCare at 1.800.243.2636.Owner’s Manual17
AutoCode Blood Glucose MeterSetting Up the Prodigy AutoCode MeterKey FunctionsTest Strip SlotInsert the test strip here.The meter will turn on automatically.LCD Display ScreenShows test results and messages.M ButtonTurns the meter on and performs otherfunctions described in this manual.USB Data PortUSB cable connection to your computer.Set ButtonUsed to set up the meter. Locatedon the back of the meter, insidethe battery compartment.Owner’s Manual18
AutoCode Blood Glucose MeterFigure 4Meter DisplayTimeDateTest Result AreaTest Strip SymbolAppears whenthe meter is intesting mode.mg/dLmmol/LBlood Drop SymbolFlashes when sample shouldbe applied.Unit of MeasureIndicates the test result unitof measure. Default value: mg/dL.Control Solution SymbolAppears when set to control solution mode.Owner’s Manual19
AutoCode Blood Glucose MeterMeter DisplayDay AverageIndicates that thedisplayed test resultis an average.mg/dLmmol/LMemory SymbolAppears whenreviewing thememory.TemperatureSymbolAppears whentemperature isoutside of theoperating range.Low BatterySymbolAppears whenthe battery poweris low.Figure 5Voice SymbolShows if audiofunction is on.Owner’s Manual20
AutoCode Blood Glucose MeterSpeaking FunctionThe Prodigy AutoCode meter talks you through thetesting procedure.When does themeter speak?What does themeter say?When the meteris turned on.“Your meter is on.Please wait. Please insertthe test strip.”When the roomtemperature is outsideof the operating range;50 F-104 F (10 C-40 C).When the meteris ready to test( appears on display).When the test iscompleted (the resultappears on the display).When you turn offthe meter.When a used test stripis inserted.When blood is appliedto the test strip.“Temperature isout of range.”“Please apply bloodinto the test strip.”“Blood glucose (number)milligrams per deciliter/millimoles per liter.”“Goodbye.”“Test strip has beenused.”“Testing.”Owner’s Manual21
AutoCode Blood Glucose MeterSetup StepsThe Prodigy AutoCode meter has several differentsettings that may need to be adjusted before use.You should check the time and date each time the batteries are replaced.STEP 1: Insert the BatteriesOpen the battery cover located on the back of themeter. Insert two (2) AAA Alkaline batteries andalign them properly. The meter will turn on andenter Setting Mode.STEP 2: Enter Setting ModeIf your meter is off, press the “SET” button locatedin the battery compartment. The meter will enter settingmode.Voice Speaks: “Your meter is on.Please wait. Setting mode. English.”STEP 3: Select LanguageThe language option appears first with “L-1” on theLCD. “L-1” indicates the default language (English);“L-2” indicates the second language (Spanish); “L-3”indicates the third language (French); and “L-4”indicates the fourth language (Arabic). See figure 6.Owner’s Manual22
AutoCode Blood Glucose MeterPress the “M” button to select a language. With the correct languageselected, press the “SET” buttonand a number will appear.STEP 4: Set the Volume Level Numbers 1 to 3 indicate thespeaker volume from low to high.If the speaker function is set onone of these levels, “ ” will bepresent on the display duringtesting. See Figure 7.Figure 6Figure 7 Number 0 indicates that thespeaking function is turned off.See Figure 8.Press the “M” button to select thespeaking volume, and then pressthe “SET” button. The year segment will appear and start flashing.See Figure 9.Figure 8Figure 9Owner’s Manual23
AutoCode Blood Glucose MeterSTEP 5: Set the YearPress and release the “M” button toadvance the year. With the correctyear on the display, press the “SET”button. The date will then appearon the display with the month segment flashing. See Figure 10.STEP 6: Set the MonthPress and release the “M” buttonto advance the month. With the correct month on the display, press the“SET” button. The date segment willstart flashing. See Figure 11.STEP 7: Set the DatePress and release the “M” button toadvance the date. With the correctdate on the display, press the “SET”button. The time will appear on thedisplay with the hour segment flashing. See Figure 12.Owner’s ManualFigure 10Figure 11Figure 1224
AutoCode Blood Glucose MeterSTEP 8: Set the HourPress and release the “M” button to advance the hour. Withthe correct hour on the display,press the “SET” button. The minutes segment will start flashing.See Figure 13.Figure 13STEP 9: Set the MinutesPress and release the “M” buttonto advance the minutes. With thecorrect minutes on the display,press the “SET” button and thenthe current unit of measurementwill start flashing.Important: Day averages are calculated from resultsobtained during the 7, 14 and 28 days preceding thecurrent date and time settings.Owner’s Manual25
AutoCode Blood Glucose MeterSTEP 10: Select Unitof MeasurementPress and hold the “M” button forfour (4) seconds until the unit ofmeasurement you are choosingappears on the display. See Figure14 and Figure 15. To skip this step,press the “SET” button.Figure 14Your meter can display test resultsin milligrams per deciliter (mg/dL)or millimoles per liter (mmoL/L). The mg/dL unit is standard inthe United States. The mmol/L unit is standardin Canada.Figure 15 The Prodigy AutoCode meter is set by default toread glucose values in mg/dL, unless changed bythe user. Reading glucose values in the incorrect units maycause serious problems such as improper dose ofmedication.Owner’s Manual26
AutoCode Blood Glucose MeterSTEP 11: Delete MemoryWhen the “dEL” and flashing “” symbols appear onthe display, you can choose to clear the memory. If youdo not want to clear the memory, press the “SET” button to skip this step.If you want to clear ALL memory,press the “M” button for four (4)seconds. See Figure 16.“OK” will appear to show that allmemory has been deleted.Figure 16Setup is now complete. “OFF” willdisplay and the meter will turn off.See Figure 17.Figure 17Owner’s Manual27
AutoCode Blood Glucose MeterControl Solution TestingProdigy Control Solution should come with an insert. For in vitro diagnostic (external) use only. Please review all instructions before using.INTENDED USE:Prodigy Control Solution is used to check the testing technique and system performance. The ProdigyAutoCode Blood Glucose Monitoring System canuse both Prodigy Control Solution Low (Level 1) andHigh (Level 2).SUMMARY:Prodigy Control Solution is a red liquid that containsglucose. The control solution reacts with the test stripsto produce a test result. When the control solution testresult falls within the control range given for the lot oftest strips being used, this is indication that the systemis working as it should and your testing technique isgood. The control range can be found on the test stripvial label.Owner’s Manual28
AutoCode Blood Glucose MeterCAUTION: The control solution ranges printed onthe back of the Prodigy test strip vials are not bloodglucose target ranges.IMPORTANT INFORMATION: Prodigy Control Solution is only to be used withProdigy Blood Glucose Monitoring Systems. Check the expiration date on the bottle. Do not use ifexpired. Use within 90 days after opening. Record the discarddate on the bottle to remind you when to discardyour control solution.WHY PERFORM A CONTROL SOLUTION TEST: To ensure that your meter and test strips are workingproperly together. To allow you to practice testing without using yourown blood.WHEN TO PERFORM A CONTROL SOLUTION TEST: When you begin using a new vial of test strips. At least once a week. When you suspect the meter or test strips are notworking properly. When your blood glucose test results are notconsistent with how you feel, or when you thinkyour test results are inaccurate.Owner’s Manual29
AutoCode Blood Glucose Meter If you drop the meter. If you change the batteries.STORAGE AND HANDLING: Storage temperatures range: 35.6 F to 86 F (2 C to30 C). Do not freeze.COMPOSITION:INGREDIENT*GlucoseOther non-active ingredients*w/v %LOW (Level 1) HIGH (Level 2)0.0599.950.1999.81TEST PROCEDURE: Check the expiration and discard dates on your control solution and test strip vial. Check your control solution to see if it is a Low (Level1) or High (Level 2) solution. Control solution should come to room temperature(68 F to 77 F / 20 C to 25 C) before testing.Owner’s Manual30
AutoCode Blood Glucose MeterPerforming a Control Solution TestStart with the meter off.STEP 1: Wash your HandsWash your hands with mild soap and water beforeperforming any test. Be sure to dry them thoroughly.STEP 2: Insert Test StripRemove a new test strip from the test strip vial, makingsure to tightly replace the vial cap. Immediately insertthe test strip into the meter’s test strip slot. The meterwill turn on automatically. When the “” symbol isblinking, it means the meter is ready for testing.STEP 3: Mark as a Control Solution TestAfter the “ ” symbol appears on the display, press the“M” button and a “ ” symbol will appear on the display.With the “ ” symbol on the display, the meter will notstore your test result in the memory. If you decide notto perform a control solution test, press the “M”button again and the “ ” symbol will disappear.Important: Make sure that the meter is in controlsolution mode so the test result will not be stored inthe meter’s memory.Owner’s Manual31
AutoCode Blood Glucose MeterSTEP 4: Apply Control Solution1. Shake the control solution bottle well, thenremove the cap.2. Squeeze the bottle and discard the first drop,then wipe the dispenser tip with clean tissue paperor cotton.3. Squeeze the bottle again toget a second drop onto a clean,non-absorbent surface or onyour finger. See Figure 18.4. Bring the tip of the test strip totouch the drop of solution until the meter beeps.Figure 18Caution: To avoid contaminating the controlsolution with the content of the test strip, do notapply the control solution directly onto the teststrip from the bottle. See Figures 19 and 20.Owner’s Manual32
AutoCode Blood Glucose MeterFigure 19Figure 20STEP 5: Check if the Test Result is in Range.After the meter counts down from 6 to 1, the control solution test result will appear on the display. Compare thistest result with the range (Low-Level 1 or High-Level 2)on the back of the test strip vial.The control range can changewith each new vial of test strips.Always use the control solutionrange on the label of your current vial of Prodigy No CodingBlood Glucose Test Strips. Theresult should fall within the printed range on the test strip vial.Figure 21See Figure 21.Owner’s Manual33
AutoCode Blood Glucose MeterQUESTIONABLE RESULTS:If the test result falls outside the range printed on thetest strip vial, check the “Troubleshooting Guide” located in the “System Troubleshooting” section of the Owner’s Manual and repeat the test.Results that fall outside of the control range may indicate: An error in how the test was performed Control solution bottle not shaken well Expired or contaminated control solution Control solution that is too warm or too cold Test strip deterioration Meter malfunction Test strips expiredCaution: Do not use the test strips or controlsolution after the expiration date, as the results maybe inaccurate.Contact Customer CareIf your test strips have been damaged or if youcontinue to get out-of-range results, it means that thesystem or control solution may not be working properly.Do NOT use the system to test your blood glucoselevel and contact Customer Care at 1.800.243.2636.Owner’s Manual34
AutoCode Blood Glucose MeterPerforming a Blood Glucose TestWarning:1. Lancets are for single use only.2. Keep lancing device and lancets clean.3. Use caution when removing the used lancet from thedevice and when disposing of it.4. The meter and lancing device are for single patientuse. Do NOT share them with anyone including otherfamily members. Do NOT use on multiple patients.Preparing the Lancing DeviceSTEP 1: Twist off the LancingDevice Cover. See Figure 22.Figure 22STEP 2: Insert a sterile lancet intothe Lancet Carrier. See Figure 23.Figure 23STEP 3: Hold the Lancet NeedleCover and gently twist it off theLancet. See Figure 24.Figure 24Owner’s Manual35
AutoCode Blood Glucose MeterSTEP 4: Re-cap the Lancing DeviceCover.STEP 5: The Adjustable Tip offers10 levels of skin penetration. Toselect the desired depth, twist theAdjustable Tip in either directionuntil the preferred setting lines upwith the arrow. See Figure 25.To select the best depth:1 - 3 for soft or thin skin4 - 6 for average skin7 - 10 for thick or calloused skinSTEP 6: Slowly pull the LoadingBarrel away from the LancingDevice Cover until you hear a click,indicating that the Lancet Carrier islocked into position. Release theLoading Barrel to return it to itsoriginal position. See Figure 26.Figure 25Figure 26The Lancing Device is prepared and ready to lance fora blood sample.Owner’s Manual36
AutoCode Blood Glucose MeterGetting a Blood SampleSTEP 1: Wash your hands and the puncture site withwarm, soapy water. Rinse and dry completely. Warmyour fingers to increase blood flow.STEP 2: Select and Lance a Puncture Site. FingertipPosition the end of the AdjustableTip against the side-tip of the finger or alternate testing site. Pressthe Trigger Button, and then liftthe Lancing Device away from thetesting site after the puncture iscomplete. Fo
The Prodigy AutoCode meter has the latest technol-ogy for blood glucose monitoring and is made with quality components. It is easy to use, provides fast test results with a minimal sample of blood, has a large, easy-to-read display screen, and is lightweight and portable for your convenience. The Prodigy AutoCode meter is designed to help you
PRODIGY Owner's Manual Prodigy Diabetes Care, LLC www.prodigymeter.com 50 51 Prodigy Diabetes Care, LLC 1.800.243.2636 PRODIGY Owner's Manual Contents of the Prodigy Voice Meter The Prodigy Voice meter is available as a meter kit only. Please review the contents of your purchase to confirm that all the components are included as listed .
PRODIGY Owner’s Manual 23 Prodigy Diabetes Care, LLC 1.800.243.2636 Contents of the Prodigy AutoCode Meter The Prodigy AutoCode meter is available as a meter only or as a meter kit. Please check the “REF” number marked on the outside of the box to see if you have purchased a “Meter
destroy the Prodigy. 4. The Prodigy employs an inertial sensor. It senses deceleration and generates an output that is based deceleration, thus the term "Proportional Braking". 5. The Prodigy will "HOLD" your trailer with 25% ofpower setting while you are at a standstill with brakepedal applied for longer than 5 seconds. 6.
And, she sees herself supporting Prodigy Finance. "I feel a little bit loyal, so I really hope that I will be successful after graduation so that I will be able to come back and help other people through Prodigy Finance." BECAUSE PRODIGY FINANCE ONLY REQUIRES SOFT COPIES OF THE DOCUMENTATION, SHE WAS ABLE TO RELAX AND FOCUS ON PREPARING FOR HER
1 Languages at Harvard 2014 – 2015 Why Study a Foreign Language? 2 Planning Your Language Study 5 Languages Offered 2014-2015 (by Department) 6 African Languages 7 Celtic Languages 9 Classical Languages 10 East Asian Languages 11 English 17 Germanic Languages 17 Linguistics 20 Near Eastern Languages 21 Romance La
c. It speaks of moral life, of passion and purity. d. It speaks of human life, of guilt and grace. e. It speaks of family life, of wrangling and reconciliation. f. It speaks of national life, of disaster and deliverance. g. It speaks of divine life, of the sovereignty of God and the foreshadowing of the Savior of the world.
1 Prodigy Diabetes Care, LLC 1.800.243.2636 Medidores Prodigy de Glucosa en Sangre Estimado Propietario de Prodigy : Gracias por elegir el glucómetro Prodi
The API also provides the user with ability to perform simple processing on measurements made by the CTSU for each channel and then treat each channel as a Touch Button, or group channels and use them as linear or circular sliders. The API inherently depends on the user to provide valid configuration values for each Special Function Register (SFR) of the CTSU. The user should obtain these .
