Undercarriage Tools - Genuine OEM CAT Parts And Products

Undercarriage and TrackSearch2616192Top Plate Assembly for Large and Small SystemOne Track Press Tools (Continued)SMCS Code: 4150Model: D3G — D8 Track-Type Tractors, and 953, 963 Track-Type LoadersWarranty: Six Months1Additional tools required. Refer to NEHS0929 Tool Operating Manual; Operation and Parts for Large Multi-Pitch SystemOne Track Press Tool2848851Undercarriage ToolsSystemOne Starter LinksSMCS Code: 0729, 4157, 4170Model Usage: All SystemOne Track Link AssembliesWarranty: Six MonthsEuropean Union compliant, CE marked Flat plates replace current forged components Used to simulate outer links and to stabilize track components during master link removal and installationReferenceNEHS0923, Tool Operating ManualSpecificationsPart No.DescriptionModelsDimensions357-9732Starter LinkD3C, D3G, D3K, D4C, D4G, D4K 258 x 83 x 13 mm (10.2 x 3.3 x .5in) , 1.0 kg (2.04 lb)357-9733Starter Link953, D5K, D6K279 x 89 x 13 mm (11 x 3.5 x .5in), 1.0 kg (2.02 lb)357-9734Starter LinkD3C, D3G, D3K, D4C, D4G, D4H, 260 x 90 x 13 mm (10.3 x 3.6 x .5D4K, D5C, D5G, D5M, D5N, D6K in), 1.0 kg (1.88 lb)357-9735Starter Link953, D5H, D6M, D6N287 x 98 x 13 mm (11.3 x 4 x .5in), 1.1 kg (2.37 lb)357-9736Starter Link963, D6H, D6R, D6T, D7R311 x 109 x 13 mm (12.3 x 4.3 x.5 in), 1.3 kg (2.83 lb)357-9737Starter Link973, D7E, D7R323 x 107 x 123 mm (12.7 x 4.2 x.5 in), 1.3 kg (2.91 lb)357-9738Starter LinkD8N, D8R, D8T343 x 127 x 13 mm (13.5 x 5.0 x.5 in), 2.0 kg (4.04 lb)2616210SystemOne Tool SpacersSMCS Code: 4150Model: See belowWarranty: Six Months Used to evenly pull off SystemOne links from an assembled track chainReferencesNEHS0929, Tool Operating Manual, Operation and Parts for Large Multi-Pitch SystemOne Track Press ToolNEHS0930, Tool Operating Manual, Operation and Parts for Small Multi-Pitch SystemOne Track Press ToolNEHS0931, Tool Operating Manual, Operation and Parts for Large Multi-Pitch SystemOne Track Press Tool (European Union Compliant)NEHS0933 Tool Operating Manual; Operation and Parts for Small Multi-Pitch SystemOne Track Press Tool (European Union Compliant)Part Number279-0092279-00956-62DescriptionTool SpacerTool SpacerHomeModelD8 Track-Type TractorD3-D7 Track-Type Tractor

Undercarriage and TrackSearch2616226Shims for SystemOne Track Press ToolSMCS Code: 4150Model: D3 — D8 Track-Type Tractors, 953, 963 Track-Type Loaders with SystemOne UndercarriageWarranty: Six MonthsUsed with large and small Multi-Pitch Track Press ToolsUsed to remove the inner track link when outer link is not installedAllows Multi-Pitch Tool to remove inner links from outer side of the chainDifferent thickness shims fit a variety of applications (shims may be stacked torequired thickness) Shims are hung in positron on threaded rods of track press toolReferencesNEHS0929, Tool Operating Manual, Operation and Parts for Large Multi-Pitch SystemOne Track Press ToolNEHS0930, Tool Operating Manual, Operation and Parts for Small Multi-Pitch SystemOne Track Press ToolNEHS0931, Tool Operating Manual, Operation and Parts for Large Multi-Pitch SystemOne Track Press Tool (European Union Compliant)NEHS0933, Tool Operating Manual, Operation and Parts for Small Multi-Pitch SystemOne Track Press Tool (European Union Compliant)Item123456Part 7901Undercarriage Tools Size12.7 mm (0.5 in) thick25.4 mm (1.0 in) thick38.1 mm (1.5 in) thick50.8 mm (2.0 in) thick63.5 mm (2.5 in) thick76.2 mm (3.0 in) thick2616254Master Link Removal Tools for SystemOne UndercarriageSMCS Code: 4170Model: D3G, D4G, D5G, D6M, D5N, D6H, D6M, D6N, D6R, D8N, D8R, D8T Track-Type Tractors and 953, 963 Track-Type LoadersWarranty: Six MonthsEuropean Union compliant, CE marked Used to remove and install master link on SystemOne Undercarriage Used with various starter links and yoke plate groups (stabilizes track components during master link removal and installation) Simple forcing system provides easy way to release master link during assembly and disassemblyReferenceNEHS0923, Tool Operating Manual, Using the Master Clamp Tools to Connect andDisconnect SystemOne Undercarriage TrackMaster Kit PartNo. 1254-2356254-2386Used OnD3G, D4G254-2387D5X, D5G (Phase IV),953-T3D5G, D5M, D5N254-2388D6M, D6N, 953-T2254-2389D6H, D6R, 963Service Parts254-2359 Contact Plate, 254-2355 SetScrew 2254-2374 Threaded Plate, 254-2381Contact Plate, 254-2355 Set Screw 3Threaded Plate, Contact Plate, 2542355 Set Screw 2Threaded Plate, Contact Plate, 2542355 Set Screw 2Threaded Plate, Contact Plate, 2542355 Set Screw 2Used With Yoke GroupNumber242-5383Used With StarterLink Number--252-9908 4252-9913 4252-9399--252-9975--242-5372--(Continued)Home6-63

Undercarriage and TrackSearch2616254Master Link Removal Tools for SystemOne Undercarriage (Continued)SMCS Code: 4170Model: D3G, D4G, D5G, D6M, D5N, D6H, D6M, D6N, D6R, D8N, D8R, D8T Track-Type Tractors and 953, 963 Track-Type LoadersWarranty: Six MonthsUndercarriage ToolsMaster Kit PartNo. 1264-8119Used OnD8N, D8R, D8TService Parts263-5389 Threaded Plate, 263-5390Contact Plate, 254-2355 Set Screw 2Used With Yoke GroupNumber--Used With StarterLink Number--Master kits contain one threaded plate, one contact plate, and two set screws254-2355 Two required3254-2374 and 254-2381 Not serviced; 254-2355 Two required4Not serviced1226162921P-3490 Master Pin Press ArrangementDiscontinued — Service Parts AvailableParts of discontinued 1P-3490 Arrangement that are not partof discontinued 2S-8210 Track Tool GroupDescriptionPart Number 11P-3481Frame - 3485Adapter5F-3492Bolt (2)8S-7172Cylinder Group12Parts of discontinued 1P-3490 Arrangement that are not partof discontinued 2S-8210 Track Tool GroupDescriptionPart Number 18S-9903Rollover Group8S-9968Ram Adapter8S-9969Ram Adapter8S-9971Ram Adapter 28S-9975Ram Adapter8S-9978Ram Adapter9S-0032PlugAll part numbers in the table have a six month warrantyAdditional parts required to assemble discontinued 8K-4239 Recoil Springs for 245 Excavators26163172S-8210 Track Tool GroupDiscontinued — Service Parts Available2S-8210Part Number 7F-04821Track Tool GroupService/Repair PartsDescriptionAdapterAdapterAdapterBushing AdapterBushing AdapterBushing AdapterBushing PusherNut (4)Part Number All part numbers in the table have a six month warranty6-64HomeService/Repair PartsDescriptionPilot PinPilot PinPilot PinPilot PinRam ExtensionStud (2)Wing Bolt (part of 1P-3490also)

SearchUndercarriage and Track26163435M-3069 Track Pin Pusher GroupDiscontinued — Service Parts Available5M-3069Service/Repair PartsItem13DescriptionAdapterAdapterPart Number 1DescriptionService/Repair Parts5M-3070Rod8B-7179Set -2612All part numbers in the table have a six month warranty1Undercarriage ToolsItemTrack Pin Pusher Group (discontinued)26163615F-9426 Track Servicing Attachment GroupDiscontinued — Service Parts Available5F-9426Service/Repair PartsItem2345679ItemDescriptionYoke AdapterRam Cap ExtensionRam Cap ExtensionRam CapRam CapRam CapYokePart Number 1Service/Repair Parts5F-94388H-31521B-74131A-35851810111Track Servicing Attachment GroupDescriptionRam Cap AdapterTension Rod (2)Full Nut (1 1/2 in NF) (2)Jam Nut (1 1/2 in NF) (4)All part numbers in the table have a six month warranty26163788T-9199 Conversion KitSMCS Code: 4170-023Model: D11N, MS1600 and Cat Track-Type MachinesWarranty: Six Months Can be retrofitted to discontinued 5P-9729 Track Repair Group, enabling it to be used on D11N and MS1600 Track(Continued)Home6-65

Undercarriage and TrackSearch26163788T-9199 Conversion Kit (Continued)Undercarriage ToolsSMCS Code: 4170-023Model: D11N, MS1600 and Cat Track-Type MachinesWarranty: Six gRingsWashersCaution DecalPart ionConversion KitRodNutQuantity-22216-3914 Track Repair Group216-3915 Bolster, 216-3916 CylinderSMCS Code: 4159, 4169-017, 4170-017, 4175, 4180, 0729-044Model: D9L, D9N, D10, D10N, D11Warranty: Six Months Used to assemble and disassemble 201-7772 D11 Track Links which are 7 mm(0.28 in) taller than previous track links Portable track press provides field service of track links Removes 1 pin at a time Maximum 150 tons of pushing forceReferencesService Manual, Power Train Disassembly and Assembly section of service manualSEHS8870, Special Instruction, Field Repair Procedure for Positive Pin RetentionTrack!Part NumberDescription216-3914Track Repair Group216-3915Bolster216-3916CylinderService/Repair Parts219-1406Connecting Rod222-8551Nut8T-7783Piston Rod CapWARNINGDamage to track links and/or track press can occur by using tooling not designed for this track link which may result in bodilyinjury.2616424Field Repair Tools for Positive Pin Retention TrackSMCS Code: 4170-023Model: Cat Track-Type MachinesWarranty: Six Months Used for field repairs on positive pin retention trackReferenceSEHS8870, Special Instruction, Field Repair Procedure for Positive Pin RetentionTrackItem11112Part d)6-66HomeDescriptionPin Adapter D11NPin Adapter D10 and D9LPin Adapter D9NPin Adapter D10NReceiver D11N

SearchField Repair Tools for Positive Pin Retention Track (Continued)Undercarriage and Track2616424SMCS Code: 4170-023Model: Cat Track-Type MachinesWarranty: Six MonthsPart 98-53425198-53435203-09821DescriptionReceiver D10 and D10NReceiver D9L and D9NPiston Rod Cap D11N and D9NSealSpringExtruder Assembly, D11NExtruder Assembly (142-5895 Body,Extruder) D10 and D10N 1Extruder Assembly (discontinued141-2396 Body, Extruder) D9L andD9NExtruder Assembly (198-5349 Body,Extruder) D8N142-5895 Body, Extruder: CancelledUndercarriage ToolsItem22344552616453Positive Pin Retention 2 ToolingSMCS Code: 4170Model: 325, 345 Hydraulic Excavator, D6R Track-Type TractorWarranty: Six Months Used to swage cartridge pins on 325, 345, and D6R machines with PPR2 track Locks cartridge pins into assembled track Extrudes (swages) track link material in 4 places aroundend of cartridge pin Both ends of cartridge pin are swaged (locked) in 1 operation Once track link is swaged, compression forces in tracklink and cartridge pin are relieved using an unloader face Used in shop or out in field for on-site repairs Used with dealer-supplied hydraulic power supply (energysource) equipped with a 700 bar (10,000 PSI) maximumpressure relief valve, a high-pressure hose 700 bar (10,000PSI) maximum pressure with a gauge, and a 265-8035 75ton Hydraulic CylinderReferencesREHS2586 Installation of Positive Pin Retention 2 (PPR2) TrackSEBF8558 Guidelines for Reusable Track PartsSEBF8598 Track Shop Servicing for Greased and LubricatedTrackSEBF8599 Undercarriage Reconditioning GuideSEBF8614 Field Repair of Swaged Greased and LubricatedTrackHome6-67

Undercarriage and TrackSearch2728871Undercarriage ToolsIllustration (Continued)1Item12314567Part riptionPlate AssemblyThreaded RodClear Plastic GuardRetaining StrapUnloader FaceExtruder Tool BaseExtruder Tool, D6R (used with276-3746)Extruder Tool, 325 (used with276-3746)Puller PlateNut - Full75 ton CylinderCylinder Centering BlockBolt - Hex Socket HeadBolt - Hex Socket HeadWasherNut - FullExtruder Tool, 345 (used with276-3746)Film - warn (debris) (track pressure)Film - warn (hand) (oil)Warning FilmFIlm, blue safety (eye/ear)Qty.2412222211012424221111Guard must cover the tooling and track link whenever swaging cartridge pins2616497Extruder Group for 345 PPR2 UndercarriageEssential ToolSMCS Code: 4170-023Model: 345 Excavator with Positive Pin Retention UndercarriageWarranty: Six Months Used for field repairs on positive pin retention track Used to assemble track links Used with 216-3914 150-Ton Portable Track PressReferenceSEHS8870, Special Instructions, Field Repair Procedure forPositive Pin Retention266- 9698 Extruder GroupItemPart No.Description1198-5348 {1}Extruder Base2Extruder Face{1} Not serviced6-68Home

Undercarriage and TrackSearch2616516Nut WrenchesSMCS Code: 4170-010Model: Cat Track-Type TractorsWarranty: Six MonthsUsed to hold nuts while removing or installing track shoe boltsMade from high-strength steelDouble-ended design has a different nut size on each endPart Size32 and 42 mm (1.25 and 1.65 in)25 and 30 mm (0.98 and 1.18 in)38.354 and 33.528 mm (1.51 and 1.32 in)32.258 and 30.226 mm (1.27 and 1.19 in)29.21 and 26.162 mm (1.15 and 1.03 in)25.4 and 22.606 mm (1.0 and 0.89 in)Undercarriage Tools 2616538Track Bolt SocketsSMCS Code: 4170-010Model: See ChartWarranty: Six Months Impact sockets for use in removing and installing track boltsSpecially designed for use with high torque impact wrenchesIn some cases undersize sockets are available for removal of worn track boltsUsed with a 9S-4026 Drive Adapter, 1 1/2 inch female to 1 inch female, a 9S-4027 Extension, 1 inch male drive both ends, anda 5P-3588 Adapter, 1 inch female to 3/4 inch maleNOTE:Hydraulic Torque Wrenches are featured in the Torquing Tools Section.Impact Sockets for Track BoltsInch1 1/8 in1 11/16 in1 5/8 in2 in2 1/16 in7/8 in27/32 in15/16 in29/32 inMetric Graduations--47.0 mm 1-------Part -79299S-63746V-7928DescriptionThin WallTaperedTaperedStandardStandardThin WallThin WallThin WallThin WallDrive1 in Square1 1/2 in Square1 1/2 in Square1 1/2 in Square1 1/2 in Square1 in Square1 in Square1 in Square1 in Square15/16 in29/32 in1 1/8 in1 3/32 in1 5/16 in1 9/32 in1 1/2 in1 15/32 in-1 1/16 in15/16 in--------27.0 mm---9S-63706V-20029S-63735P-35799S-63725P-3580 29S-63715P-3581 andardStandardStandardStandardStandardTaperedThin Wall 3Thin Wall 31 in Square1 in Square1 in Square1 in Square1 in Square1 in Square1 in Square1 in Square1 in Square3/4 in Square3/4 in SquareApplication955, 977, 235D10, D10ND10, D10N worn bolts and 375, 5080D11N worn boltsD11N, 5130D3, D4, 941, 933, 931D3, D4, 941, 933, 931 worn boltsD4, 941, 943, 951, 953, 955, 215, 225D4, 941, 943, 951, 953, 955, 215, 225worn boltsD5, D6, D4H, D5HD5, D6, D4H, D5H worn boltsD6, D7, 963, D6H, D7HD6, D7, 963, D6H, D7H worn boltsD8, 973, 983, D8L, D8ND8, 973, 983, D8L, D8N worn boltsD9, D9L, D9N, 245D9, D9L, D9N, 245 worn boltsE(L)180, E(L)200, E(L)240, E300E(L)180, E(L)200, E(L)240, E300E110, E120, E140, 311, 312(Continued)Home6-69

Undercarriage and TrackSearch2616538Track Bolt Sockets (Continued)SMCS Code: 4170-010Model: See ChartWarranty: Six MonthsImpact Sockets for Track BoltsUndercarriage ToolsInch-1 1/4 in-3/4 in-7/8 in-1 3/16 in--Metric Graduations24.0 mm-32.0 mm-19.0 mm-22.0 mm-30.0 mmPart 61U-7627214-65611U-7630DescriptionTaperedThin Wall 3TaperedThin Wall 3TaperedThin Wall 3TaperedThin Wall 3TaperedDrive1 in Square3/4 in Square1 in Square3/4 in Square1 in Square3/4 in Square1 in Square3/4 in Square1 in SquareApplicationE110, E120, E140, 311, 312E450, E650, 330, 350E450, E650, 330, 350E70, 307E70, 307E90E90EL300, 320, 325EL300, 320, 32541 mm Metric for 375 and 5080 Applications onlyChrome Finish3Do not use these sockets on standard impact wrenches122616591Cat 300 and 375 Ton Track PressesSMCS Code: 4150Model: All Cat trackWarranty: Six MonthsEuropean Union compliant, CE marked Replaces discontinued 350 Ton Track Press Disassembles and assembles track link assemblies to perform pin and bushingturns 300 and 375 ton models include a 10-foot long track indexer advanced bymanually-operated hydraulic valves 375 ton model has an optional PLC controlled automatic indexing feature -single push-button sequentially activates the hold-down shoe, encoder, indexertable raise/lower, and indexer advance/retract functions to automatically position the track for the next pressing operation Automatic indexing uses a digital encoder that reads the exact distance thetrack has moved during indexing and stops at exactly one full track pitchdistance -- reduces operator time to manually position the track for the nextoperation Increased ram speeds reduce cycle times Individual hydraulic pressure control dials and gauges for each main ram-gauges read directly in tons to eliminate PSI conversion Two 436 L (115 gal) hydraulic tanks provide cool and efficient flow to the uniquenon-drift hydraulic system 170-2503 Connecting Bars use “T-slot bolts” for easy mounting of contact tooling, and fine-tuning knobs allow for quick and precise positioning of tooling Designed and built exclusively through the Dealer Service Tools Division Uses Cat part-numbered components when possible for simplified maintenance All models are offered in 380, 460 or 575 Volts/50 or 60 Hz configurationsReferencesNEHS0800, Caterpillar 375T Track Press ManualNEHS0802, Caterpillar Track Press Tool Operating Manual - IntroductionOrdering Information(Continued)6-70Home

SearchUndercarriage and Track2616591Cat 300 and 375 Ton Track Presses (Continued)SMCS Code: 4150Model: All Cat trackWarranty: Six MonthsPart Number170-2503170-5664Undercarriage ToolsContact the Caterpillar Dealer Service Tools Division for quotations and specifications. This product is purchased outside of the Cat parts network via a PurchaseOrder. See Contact Information.Part No.DescriptionIncluded with the press53 kN (12,000 lb) winch with pendantcontrol for loading track on conveyorWork area lights (2)Hydraulic hold-down shoeSaddle bolts and wedge barsSold SeparatelyCat saddles and contact tooling foreach track pitch sizeConversion groups to mount competitivecontact toolingRelated tooling (Sold Separately)Disassembly and assembly contact tooling15.25 m (50 ft) conveyor-includes hydraulically activated track shoe lifter and 1.5m (5 ft) rampCat Track Torque Wrench (CTTW)FT1238Track Lube Vacuum UnitDescriptionIncluded with the pressConnecting Bars (2)Related tooling (Sold Separately)Test and Fill MachineHome6-71

Undercarriage and TrackSearch2616622Cat Track Torque Wrench (CTTW)SMCS Code: 4150Model: All Cat trackWarranty: Six MonthsUndercarriage ToolsEuropean Union compliant, CE marked PLC controlled hydraulic torque wrench used to removeand replace track shoe bolts during the track reconditioning process CTTW travels up and down the rails of the conveyor thatattaches to a track press Performs the

Model: D10N, D11N, D4H, D5H, D6H, D7H, D8L, D8N, D9N Warranty: Six Months Used for installation of large shear seals inside recoil spring housing on H and L Series track-type tractors; interference fit of these s