Installation Instructions - John Louis Home
Installation Instructions12in. Deep Premier Closet OrganizerMODEL: JLH-528, JLH-52916in. Deep Deluxe Closet OrganizerMODEL: JLH-525, JLH-526www.johnlouishome.comBOOKLET SKU#707
IMPORTANT: DO NOT RETURN TO STORE!For missing or damaged parts, technical or assembly questions,please call John Louis Customer Service at1-800-480-6985IMPORTANTE: ¡NO LO DEVUELVA A LA TIENDA!Llame al servicio al cliente local de John Louis al1-800-480-6985para aclarar sus dudas sobre pérdidas, daños, asuntos écnicos y ensamblaje.IMPORTANT: NE PAS RENVOYER OU RAPPORTER AU MAGASIN!Si vous avez une question concernant l’assemblage, des piéces manquantes ou endommagées ouun probléme technique, appelez le Service á la clientéle de John Louis au 1-800-480-6985.PARTS LISTLista De PiezasListe Des PiécesQuantity: 1 72 in. ShelfQuantity: 2 48 in. ShelfQuantity: 2 24 in. Adjustable ShelfQuantity: 1 24 in. Tower Bottom Cam ShelfQuantity: 2 72 in. Tower SideQuantity: 1 26.25 in. Tower Top ShelfQuantity: 1 72 in. Garment BarQuantity: 6 Angle BracketQuantity: 2 48 in. Garment Bar1
Quantity: 6J-HookQuantity: 6Tower BracketQuantity: 7Shelf EndQuantity: 6 #8 3 in.Quantity: 12#8 1 in. (J-Hook)Quantity: 4Cam BoltQuantity: 14Shelf mounting L- ClipQuantity: 4#8 1/2 in.Quantity: 4Tower Mushroom CapQuantity: 4Barrel BoltQuantity: 24#4 3/4 in.Quantity: 16Adjustable Shelf PinQuantity: 4Barrel NutQuantity: 6Angle Bracket MushroomCapQuantity: 56 Wall AnchorQuantity: 64 #8 1 1/2 in.Quantity: 14#8 3/4 in.Quantity: 6Bar EndQuantity: 5Cam Lock NutQuantity: 8 #6 1 1/4 Self Tapping ScrewQuantity: 1Touch Up Stain PenQuantity: 1Allen wrenchQuantity: 1Shelf End TemplateContactContact0ContacterFor questions concerning missing or damaged parts, technical specs and / or assemblyhelp, please contact John Louis Home Customer Service at:Si tiene preguntas sobre partes faltantes o dañadas, especificaciones técnicas o asistencia para el armado, comuníquese con el Servicio al Cliente de John Louis Home:Pour toute question relative à des pièces manquantes ou endommagées, toute spécification technique et/ou aide au montage, contactez le service après-vente de John LouisHome au :1.800.480.6985 service@johnlouishome.comwww.johnlouishome.comJohn Louis Home 4310 Rider Trail North Earth City, Missouri 63045 USA 2016 John Louis Inc., All Rights Reserved.2
IMPORTANT - Read Before Assembly12 in. deep Premier Organizer and 16 in. deep Deluxe Organizeruse the same assembly instruction process EXCEPT DURINGTHE J-HOOK PLACEMENT ON THE ANGLE BRACKET.STEP 2 - Marking Measurements On Wall1.2.3.4.Locate the 3 main shelf height locations for your configuration.Measure up from the floor & mark the 84 in. location.Measure up from the floor & mark the 42 in. location.Measure up from the floor & mark the 72in. location.Assembly instructions are written for 8 ft. configuration A.All assembly processes are the same for each configurationEXCEPT for the order or locations of the assembly process.Use selected configuration for shelf locations.Shelf lengths and Garment bars may need to be cut depending upon configurationdesired.84 in. - top shelf42 in. - lower hang shelf72 in. - long hang shelf123All cut shelf lengths are used in closet configurations supplied. Depending uponyour closet dimensions, some cut lengths may not be usable.EXAMPLE: If you choose an 8 ft. closet configuration and the width of yourcloset is 8 ft. 4 in., the cut shelf length will be short 4 in. for use. It is recommendedthat if your closet is over the selected dimension (8 ft.), then choose a configuration from the next dimension higher (10 ft.).EXAMPLE: If you choose an 8 ft. closet configuration and the width of yourcloset is 7 ft. 6 in., some shelf lengths may need to be cut 6 in. shorter in lengthto fit closet dimensions.VERIFY SHELF MEASUREMENTSMEASURE - MARK - MEASURE AGAINChosen configuration may not require use of all hardware or components supplied.5.6.7.8.Draw a 6 ft. long level line out from wall end at 84 in. location.Draw a 4 ft. long level line out from wall end at 42 in. location.Draw a 22 in. long level line out from wall end at 72 in. location.Locate stud locations at level lines.5867It is recommended to secure hardware into wall studs for overall strength andstability of closet system.If choosing a custom designed configuration, modifications to the instructions provided will be necessary.All configurations provided may be reversed.STEP 1 - Determining Your DimensionsLocate your desired configuration (Instructions are written for 8 ft.configuration A).Double hang is created with 2 - 4 ft. shelf length.Long hang is created by cutting a 6 ft. shelf to 21.75 in. wide. (If yourcloset is greater or less than 8 ft. wide you will cut your shelf greateror less that distance.)1.2.3.233STEP 3 - Tower Assembly1.2.3.4.5.6.1Place tower sides down with grooves facing up.Insert cam bolts at tower bottom hole locations (Do not over tighten).Insert tower sides into tower bottom.Insert cam nuts into tower bottom shelf with arrow facing bolt hole.Secure by turning cam nuts clockwise to tighten.Repeat for opposite tower side.24
23341011.12.13.14.15.16.10Place tower face down (nameplate typically designates tower front)Place top tower bracket between 1 st & 2nd groove.Place middle tower bracket between 8 th & 9th groove.Place bottom tower bracket between last groove & tower bottom.Repeat for opposite side.Secure brackets to tower using #8 3/4 in. screws.111213514615167.8.9.10.7Place tower top (26 1/4in. shelf) into notches at top of tower.Insert barrel nuts into tower sides with slot in a vertical position.Insert barrel bolts into tower topFlush Tower top with tower side & tighten with allen wrench provided (nutposition may need adjustment).8STEP 4 - Installing Top Shelf & TowerIt is recommended to install hardware into wall studs. Typically 16 in. oncenter. Use 50 lb. wall anchors provided if no stud is present.89On the top level line space shelf mounting L-clip hardware equidistant inthe following manner: 3 L-clip hardware within the 48in. shelf location 2 L-clip hardware within the tower top locationNOTE: AT LEAST 1 L-CLIP HARDWARE MUST BE INSTALLED INTO A WALL STUD AT TOWER TOP LOCATION1.2.3.Center the top screw hole of the shelf mounting L-clip hardware with thelevel line & mark all hole locations.Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wallanchors provided if no stud is present).Repeat for remaining L-clip locations.4
1229.10.11.12.13.Place shelf onto hardware.Place tower onto hardware.Place a shelf end onto the shelf at tower end.Flush tower with top shelf by moving tower left or right.Level shelf front to back & mark shelf end hardware location on tower.91011123134.5.6.7.8.46Position shelf end template onto side wall.Align template line with adjacent wall line.Level template.Mark required Shelf End position for required depth (12in. or 16in. depth).Secure shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud ispresent).514.15.16.17.Plumb level tower side.Mark tower bracket hole locations on wall.Remove shelf and tower.Align shelf end hardware with the mark on the tower & mark screw holelocations.18. Secure shelf end to tower top using #8 1/2in. screws at hole location.NOTE: If shelf is mounted level with the tower top, the shelf end hardwareshould be “centered” on the end of the front rail of the tower top.141516177188819.20.21.22.23.5Install wall anchors at tower bracket locations if no stud is present.Place tower onto wall and align with hole locations.Place shelf onto wall hardware.Secure tower to wall using #8 1 1/2in. screws at all bracket locations.Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.
1920215.Secure L-clip to wall using #8 1 1/2 in. screws at hole locations (Use wallanchors provided if no stud is present).Repeat for all L-clips at shelf height location.6.354222356237.8.9.10.11.Position shelf end template onto side wall.Align template line with adjacent wall line.Level template.Mark required Shelf End position for required depth (12in. or 16in. depth).Secure Shelf End using #8 - 1 1/2in. screws (use wall anchor if no stud ispresent).789101111STEP 5 - Installing Secondary Shelves1.2.1Lower hang shelf is created using a 4 ft. shelf.Long hang is created by cutting a 6 ft. shelf to 21.75 in. wide. (If yourcloset is greater or less than 8 ft. wide you will cut your shelf greateror less that distance.)23.Mark L clip hardware locations for secondary shelves. It is recommended to install hardware into wall studs. Typically 16 in.on center. Use 50 lb. wall anchors provided if no stud is present. Space L-clip hardware equidistant in the following manner:4-5 L-clip hardware per 6 ft. shelf span3-4 L-clip hardware per 4 ft. shelf span2 L-clip hardware per 2 ft. shelf span4.Center the top screw hole of the shelf mounting L-clip hardware with thelevel line & mark all hole locations.6
12.13.14.15.16.Position shelf end template onto tower side.Align template line with adjacent wall line.Level template.Mark required Shelf End position for required depth (12in. or 16in. depth).Secure using Shelf End #8 - 3/4in. screws.12141315911101112131614161517. Double check required shelf measurement. Cut Shelf if necessary.18. Place shelf into shelf end hardware & onto L-clip hardware.19. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.18191921. Double check required shelf measurement. Cut Shelf to required width.22. Place shelf into shelf end hardware & onto L-clip hardware.23. Secure shelf to hardware using #4 3/4 in. screws at all hardware locations.2122232320. Repeat hardware mounting steps for additional secondary shelf.778
STEP 6 - Installing Angle Brackets16 in. Angle Bracket used with 16 in. deep Deluxe Organizer1.2.3.4.Measure 3 in. back from front of angle bracket & mark location.Place J-hook snug with underside of bracket & align the front edge of theJ-hook with the mark.Secure using #8 1 in. screws.Repeat for each angle bracket & J-hook.4.5.6.7.8.9.Insert #8 3 in. screw into angle bracket.Position angle bracket 6 in. or 4 slats in from shelf end (bracket may bepositioned in your desired location).Ensure bracket is square with shelf underside & back wall.If no stud is present, mark hole location by driving screw into drywall.Install anchor if no stud is present.Secure angle bracket using #8 3 in. screw.45678912312 in. Angle Bracket used with 12 in. deep Premier OrganizerOn the 12 in. angle bracket install it is recommended to pre-pilot screwhole locations with a 1/8 in. drill bit prior to securing the J-hook to theangle bracket.1.2.3.Place J-hook snug with underside of bracket & flush the front edge of theJ-hook with the front of the angle bracket.Secure using #8 1 in. screws.Repeat for each angle bracket & J-hook.10. Repeat for 2nd angle bracket.11. Repeat for all shelf locations.128
STEP 7 - Installing Garment Bars1.2.3.24.5.6.49101111Locate the bar dimensions in you configuration guideThe double hang garment bars are created by using 2 - 4ft. bars.The long hang garment bar is created by cutting a bar to 21 in. wide (Therequired distance may vary based on actual closet dimensions)3DOUBLE CHECK MEASUREMENTS PRIOR TO CUTTING BARSMeasure required dimension, mark & cut bar (if necessary).Repeat for all bars.STEP 8 - Installing Adjustable Shelves41.2.3.Select a 24 in. adjustable shelfInsert shelf pin into shelf at hole location.Repeat at each hole location.27.8.7Insert bar end into end of garment bar.Turn clockwise to tighten & repeat for each bar end.74.5.Place the shelf into the tower by inserting the pins into the tower grooves.Create a shoe shelf by inserting the shelf upside down with the back onegroove higher than the front.48859. Place garment bar onto J-hooks.10. Secure garment bar to J-Hooks using #6 1 1/4 in. self tapping screws.11. Repeat for all garment bar locations.934
Creating Adjustable ShelvesPut your excess cuts back into your closet. Any material greater than 24 in.wide can be used as an additional shelf.Cut excess lengths to 24 in. wide to use as tower shelves & place whereever you choose.In an 8 ft. closet configuration your 4 ft. of excess shelving can create 2additional adjustable shelves.STEP 9 - Final Touches1.2.3.Insert mushroom caps into all angle brackets.Insert mushroom caps into barrel nut holes on tower sides.Touch up scratches & cut ends with stain pen provided.1231.2.Measure required dimension, mark & cut shelf (if necessary).Place shelf end bracket onto shelf.13.4.35.6.7.2Using the lower hole location on the bracket, drill a pilot hole using a 1/8 in.drill bit.Remove the shelf end bracket.4Re-drill hole 1 - 1 1/4 in. deep using a 1/4 in. drill bit.Repeat steps for each shelf end.Insert shelf pin into holes at each end.5710
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Barrel Nut Quantity: 4 Barrel Bolt 2 Quantity: 14 #8 3/4 in. Quantity: 1 Allen wrench Contact Contact0 Contacter For questions concerning missing or damaged parts, technical specs and / or assembly help, please contact John Louis Home Customer Service at: Si tiene preguntas sobre partes
Reasons for the French Revolution In the 1700s, France was the cultural capital of Europe, home to numerous Enlightenment thinkers, & had wealth from colonies King Louis XIV was the most powerful king in Europe; After his death in 1715, Louis XV & Louis XVI continued to rule France as absolute monarchs King Louis XIVKing Louis XVI
Mercedes Benz of St. Louis 1048 Hampton Ave, St. Louis, MO. 63139 314-647-2400 Plaza Mercedes Benz 11830 Olive Blvd, St Louis, MO, 63141 314-301-1700 Mini Mini of St. Louis 40 Sunnen Dr, St Louis, MO, 63143 314-644-6464 Nissan Auffenberg
D, Suite 2030 East St. Louis, IL 62201 Lease clinic space UMSL - Grand Center 3651 Olive Street, St. Louis, MO 63108 Owned Central West End Children's Advocacy Center 4443 W. Pine Blvd., St. Louis, MO 63108 Owned Newman Center 8200 Natural Bridge Road, St. Louis, MO 63121 Student organization
14 The SoHo 1501 South 7th Street St. Louis MO 63104 Under Construction 330 St. Louis - Lafayette Square 07/01/2021 07/31/2023 15 Reserve at Mid Rivers . 18 2200 Lasalle at Lafayette Square Chouteau Avenue & Jefferson Avenue St. Louis MO 63103 Under Construction 128 St. Louis - Lafayette Square 03/01/2021 10/31/2022 .
118 I have broken these verses here in John chapter 1 into four main points and they are, THE WORD IS MADE FLESH – JOHN 1:14 JOHN BORE WITNESS – JOHN 1:15 GRACE AND TRUTH – JOHN 1:16-17 GOD MADE KNOWN – JOHN 1:18 So John is going to finish up his prologue or introduction that covers John 1:1-18, as I
55. Graphic Arts Association of St. Louis, Inc.63. Moolah Temple Association (vacant vacant lot lot) 321 North Spring Avenue 3821 Lindell Boulevard St. Louis, Missouri 63108 St. Louis, Missouri 63108 56. Printing Industries of St. Louis, Inc. 64. Harvey J. Johnson vacant lot 3757 Westminster Place
5888 Plymouth, St. Louis, MO 63112 7:00 PM — 8:30 PM MOST 529 AND K-12 EDUCATION Kathryn Linnemann Branch Library 2323 Elm Street St., St. Charles, MO 63301 RSVP: www.mylibrary.org THURSDAY, APRIL 4 10:00 AM — 12:00 PM HOME BUYING 101 St. Louis Housing Authority 3520 Page Ave., St. Louis, MO 63106 1:00 PM — 2:00 PM FOUNDATIONS OF INVESTING
Un additif alimentaire est défini comme ‘’ n’importe quelle substance habituellement non consommée comme un aliment en soi et non employée comme un ingrédient caractéristique de l’aliment, qu’il ait un une valeur nutritionnelle ou non, dont l’addition intentionnelle à l’aliment pour un but technologique dans la fabrication, le traitement, la préparation, l’emballage, le .
