ZEISS O-INSPECT Specifications - Qpluslabs

3y ago
34 Views
2 Downloads
604.30 KB
6 Pages
Last View : 17d ago
Last Download : 2m ago
Upload by : Milo Davies
Transcription

ZEISS O-INSPECTSpecificationsStatus: November 2017

System descriptionType according to ISO 10360-1:2000O-INSPECT 3/2/2: Column CMM, O-INSPECT 5/4/3 and 8/6/3: Fixed bridge CMMOperating modemotorized / CNCSensor mountsFixed installationSensorsZEISS VAST XXT (contact)/ ZEISS Discovery.V12 (optical)SoftwareZEISS CALYPSO, ZEISS GEAR PRO (option)3/2/25/4/38/6/3Travel speedMotorizedin mm/sAxes0 to 1000 to 1000 to 100CNCin mm/sX, Y, Z axes300/300/100300/300/100300/150/100in mm/sVector435435350in mm/s2X, Y, Z axes500/500/500500/500/500500/200/500in mm/s2Vector866866735AccelerationSensors and accuracyThe CMM specifications are only valid when using original accessories by ZEISS. The specified parameters are observed in the application of the internal test instructions for acceptancetesting and in the use of the released standards in accordance with the ISO 10360 series.ZEISS VAST XXTScanning and single-point sensor. Measuring speed up to max. 2.5 seconds per point and up to500 points/s by scanning. Axial stylus length 30-150 mm; radial stylus length up to 65 mm (star stylus);stylus tip diameter of 0,3 to 8 mm, maximum stylus weight 15 g; max. stylus speed 5 mm/s1)Length measurement errorMPE complies with ISO 10360-2:20092)3/2/25/4/38/6/3E0 X/Y/Z (1D)in µm18 C - 22 C1.6 L/2001.6 L/2501.9 L/150E0 XY (2D)in µm18 C - 22 C1.9 L/1501.7 L/2502.0 L/150E0 (3D)in µm18 C - 22 C2.4 L/1501.9 L/2502.2 L/150TVAin µm18 C - 26 C2.7 L/1502.2 L/1002.5 L/10018 C - 30 C2.9 L/1502.4 L/802.7 L/801.21.21.22.72.73.8TVAin µmRepeatability rangeMPL complies with ISO 10360-2:2009R0in µmScanning errorMPE complies with ISO 10360-4:2000THPin µm18 C - 22 CRequired measuring time MPTτin s18 C - 22 C555568Form measurement error 6)MPE for roundness complies with ISO 12181(VDI/VDE 2617, sheet 2.2)RONt (MZCI)in µm18 C - 22 C2.42.42.4Single stylus form probing errorMPE complies with ISO 10360-5:2010PFTUin µm18 C - 22 C2.41.92.2Multi-stylus form probing errorMPE complies with ISO 10360-5:2010PFTM3)in µm18 C - 22 C4.84.84.8Multi-stylus dimension probing errorMPE complies with ISO 10360-5:2010PSTM3)in µm18 C - 22 C1.21.21.2Multi-stylus location probing errorMPL complies with ISO 10360-5:2010PLTM3)in µm18 C - 22 C3.83.83.8ZEISS Discovery.V12Optical 2D camera sensor with image processing functionality and autofocus, 12x zoom, 10 fixed zoom levels,CMOS measuring camera chip, measuring speed up to 30 frames/s, max. probing speed 10 mm/s (Z axis), working distance 87 mm, laser pointer. Illumination: outside 8-segment ring light (blue and red), inside ring light (blueand red), coaxial light (blue and red), transmitted light.4)Length measurement error 2)MPE complies with ISO 10360-7:2011EU X/Y (1D)Repeatability range(of EU - MPL complies with ISO 10360-7:2011RU XYRepeatability range(of EUZ L 0 mm - MPL complies with ISO 10360-7:2011RUZProbing errorMPE complies with ISO 10360-7:2011PF2DProbing error of the image processing systemMPE complies with ISO 10360-7:2011PFV2D1)2)3)4)5)6)EU XY (2D)5)5)5)5)5)5)3/2/25/4/38/6/3in µm18 C - 22 C1.6 L/2001.6 L/2501.9 L/150in µm18 C - 22 C1.9 L/1501.7 L/2502.0 L/150in µm18 C - 22 C1.21.21.2in µm18 C - 22 C1.91.91.9in µm18 C - 22 C1.91.72.0in µm18 C - 22 C1.21.21.2ZEISS VAST XXT: acceptance test with TL3 module; stylus length of 70 mm and stylus tip diameter of 8 mm.Measuring length L in mm with acceptance testing plate from ZEISS.Measuring location near the calibration position to document sensor properties.Laser class 1: EN (IEC) 60825-1:20026.3x magnificationFilter used: 50 W/U; scanning speed for roundness: 5 mm/s, value valid XY direction

12436578AA108,8104,650,41428B032 - 0,03BOptical confocal white light distance sensorC045 - 0,03CMittlerer Arbeitsabstand 61mmFC- APC Faser ConnectorMeasuring range 2 mmD1)for ZEISS O-INSPECT 3/2/2, 5/4/3, 8/6/3DWorking distance 61 mm, resolution 0.07 μm, measurable surface inclination to beaming direction 90 15 2), measuring spotdiameter 12.5 μmEVertrauliches Dokument * Vervielfältigung nur mit schriftlicher Genehmigung der Firma PrecitecTechnische Änderungen vorbehaltenist Wiederholteil inDurchgef.Änd.123Mittlerer Arbeitsabstand 4.Allgemeintol.: DIN ISO 2768 fKTolerierung:DIN ISO 8015.19.03.10MH.gepr.gen.Passungen:.050 ke:.079 r.Oberfläche nach DIN 1302Ra .Maßstab:BenennungDIN ISO 286Datumentw./gez.2mm-Messkopf1:10281-0.5450.A09RB 200137Seite:Ersatz für:Entwickelt aus:1v.1A3E[Uni:Tr:ODS]Z axisin µm18 C - 22 C1.9 L/250Total dimension probing errorMPE complies with ISO 10360-8:2013P[Size.Sph.All:Tr:ODS]Z axisin µm18 C - 22 C556Measuring range 3 mm22,5 mmA24- 0,0549 - 0,093Name.Unidirectional length measurement errorMPE complies with ISO 10360-8:20134FC- APC Faser ConnectorA2Tag.1.069 Prüfzeichnung.059 Montageanw.(nur für mech.Teile)Ausg.047 Oberflächenbearb.044 Fertigungsanw.Weitere Dokumente :FWorking distance 22.5 mm, resolution 0.1 μm, measurable surface inclination to beaming direction 90 30 2), measuring spotdiameter 12 μmBB32,4105,7CCTechnische Änderungen vorbehalten!Vertrauliches Dokument * Vervielfältigung nur mit schriftlicher Genehmigung der Firma PrecitecAlle nicht bemaßten Fasen: 0,2x45ist Wiederholteil inOberflächenbehandlung:Schichtdicke:.Oberfläche nach DIN 1302.Lieferant:.Ra .Masse :Benennung.2.050 Lackiervorschrift.079 Fertigungsvorr.Allgemeintol.: DIN ISO 2768 fKTolerierung: DIN ISO 8015Passungen: DIN ISO 286Werkstoff:.1.069 Prüfzeichnung.059 Montageanw.Ausg.D.047 Oberflächenbearb.044 Fertigungsanw.Weitere Dokumente :(nur für mech.Teile)Durchgef.Änd.TagNameUnidirectional length measurement errorMPE complies with ISO 10360-8:2013E[Uni:Tr:ODS]Z axisin µm18 C - 22 C2.2 L/250Total dimension probing errorMPE complies with ISO 10360-8:2013P[Size.Sph.All:Tr:ODS]Z axisin µm18 C - 22 C5501 MH13.05.09HSbFaseranschluß geä.aFaseranschluß geä.3.entw./gez.Maßstab:Maßzeichnung3mm 50Ersatz für:1v.1A4Entwickelt aus:56ctorbstand 70mmAMeasuring range 10 mmB60,5070 mm working distance, 0.3 µm resolutionMeasurable surface inclination to beaming direction 90 20 Measuring spot diameter 24 μm2)146,7CTechnische Änderungen vorbehalten!Vertrauliches Dokument * Vervielfältigung nur mit schriftlicher Genehmigung der Firma PrecitecAlle nicht bemaßten Fasen: 0,2x45ist Wiederholteil inDurchgef.Änd.TagName.dFaseranschl. rt!ba.069 Prüfzeichnung.059 Montageanw.(nur für mech.Teile)Ausg.047 Oberflächenbearb.044 Fertigungsanw.Weitere Dokumente :Allgemeintol.: DIN ISO 2768 fKTolerierung: DIN ISO 8015Passungen: DIN ISO 286Masse :entw./gez.724 .23.07.09.050 ke:.079 Fertigungsvorr.Unidirectional length measurement errorMaßzeichnungMPE complieswith ISO 10360-8:201310mm MesskopfE[Uni:Tr:ODS]Z axisin µm18 C - 22 C3.9 L/250P[Size.Sph.All:Tr:ODS]Z axisin µm18 C - 22 C5in kg18 C - 22 Capprox. 6.3Measuring systemResolutionin “18 C - 22 C0,07Working rangeB12With a vertical RT axisin mmin mm165Highth2With a vertical RT axisin mmin mm135Werkstoff:.Oberfläche nach DIN 1302Lieferant:.Ra .D09RB200071HS21.07.09HS.1v.1A4Total dimension probing errorMPE complies with ISO 10360-8:2013Ersatz für:Entwickelt aus:Rotary table1)for ZEISS O-INSPECT 5/4/3 and 8/6/3Dimensions and weightMasseDynamicsMax. angular velocityin /s18 C - 22 C50Rotation speedin min-118 C - 22 C8.3in Nmin Nmin ment of tiltMax. centering capacity3)Tilt rigidityin Nm/“1Available torqueMin Nm18 C - 22 C3Max. distance of the loadto the jaw chuckin mm18 C - 22 C100in mm18 C - 22 Capprox. 150Max. workpiece diameterAccuracyAngular position repeatabilityin “18 C - 22 C 0.75Axial runoutMPE complies with ISO 10360-3:2000FAin µm18 C - 22 C6Radial runoutMPE complies with ISO 10360-3:2000FRin µm18 C - 22 C6WobbleMPE complies with ISO 10360-3:2000FTin µm18 C - 22 C61)2)Optionally available.Depending on the reflection behavior of the surface.by approx. 1.5 kg

ZEISS O-INSPECT 3/2/2Dimensions in mmMeasuring rangeStylus data geometryOverall machine dimensionsWorking range(Max. workpiecesize)X axisY axisZ axisZEISS VAST XXTZEISS Discovery.V12White light distance B7B17Basic model3002002000074.0-1.0170.561.58651)10002)1405 With standard base3002002000074.0-1.0170.561.58651)10002)2080 With shopfloor base3002002000074.0-1.0170.561.5approx. 193519602)2115 Dimensions in mmWeight in kgFootprintWidthTable heightAssembly clearanceMax. workpieceMeasuring machineLengthw1w23)l1B23c1Basic model8657651000305 20020325with standard base865740991980 20020440With shopfloor base732-9201015 20020490G106B7c1G104min. 300B23B23B7G105B5optionalstandard basew2B6/w160 B23B5B7 60c1G104optionalshop floorbasew2w1B6l1B5Note: the given dimensions and weights are approximate values. Subject to change. Actual appearance of specific sizes may vary from illustration.Dimensioning based on DIN 4000-167:2009.1)2)3)plus 2 x 500 mm assembly clearance.plus 240 mm for control panel storage and 500 mm assembly clearance.With disassembly of the cover parts during installation.B6

ZEISS O-INSPECT 5/4/3 Dimensions in mmMeasuring rangeStylus data geometryOverall machine dimensionsWorking range(Max. workpiece size)X axisY axisZ axisZEISS VAST XXTZEISS Discovery.V12White light distance ions in mm1)16532)Weight in kgFootprintTable heightAssembly clearanceWidthLengthB6l1B23c110901295850 200Max. workpieceMeasuring machineBase25600150ZEISS O-INSPECT 8/6/3 Dimensions in mmMeasuring rangeStylus data geometryOverall machine dimensionsWorking range(Max. workpiece size)X axisY axisZ axisZEISS VAST XXTZEISS Discovery.V12White light distance 060Dimensions in mmFootprintWeight in kgTable heightAssembly clearancel1B23c11591850 200LengthB61440Max. workpieceMeasuring machineBase1001000200G106B23G105h2 B12G104B7c1Widthl1B17B5B6Note: the given dimensions and weights are approximate values. Subject to change. Actual appearance of specific sizes may vary from illustration.Dimensioning based on DIN 4000-167:2009.1)2)plus 2 x 500 mm assembly clearance.plus 200 mm for control panel storage and 500 mm assembly clearance.

Requirements for operational readinessRelative humidity40 % - 70% (without condensation)Environmental temperature17 C - 35 CElectrical power rating3/2/25/4/38/6/31/N/PE 100 - 240V ( 10%);50-60 Hz max. power consumption600 VA Typical power consumption(thermal load): 170 W1/N/PE 100 - 240V ( 10%);50-60 Hz max. power consumption600 VA Typical power consumption(thermal load): 170 W1/N/PE 100 - 240V ( 10%);50-60 Hz max. power consumption600 VA Typical power consumption(thermal load): 170 WEnvironmental requirementsPermissible humidity (without condensation)Environmental temperatureTemperature fluctuationsFloor vibrationsper day3/2/25/4/38/6/340 % - 70 %40 % - 70 %40 % - 70 %18 C - 22 C18 C - 22 C18 C - 22 C2.0 K/d2.0 K/d2.0 K/dper hour1.0 K/h1.0 K/h1.0 K/hspatial1.0 K/m1.0 K/m1.0 K/mZEISS O-INSPECT is equipped with an integrated vibration damping system and is therefore highly resistant to vibrations.Technical featuresLength measurement system3/2/25/4/38/6/3Optical scales; reflected lightsystem, photoelectric, resolution0.2 μmOptical scales; reflected lightsystem, photoelectric, resolution0.2 μmOptical scales; reflected lightsystem, photoelectric, resolution0.2 μmTypebased on ZEISS C99Lbased on ZEISS C99Lbased on ZEISS C99LProtection typeIP53IP53IP53Data technologyDelivered with a fully equippedworkstation.Delivered with a fully equippedworkstation.Delivered with a fully equippedworkstation.Accessories (optional)Star stylus kit, part clamping set,pallet frame, optical confocal whitelight distance sensor, workpiecetemperature sensor, measuringlab illumination, standard base,ShopFloor baseStar stylus kit, part clamping set,pallet frame, rotary table, opticalconfocal white light distance sensor, workpiece temperature sensor,measuring lab illuminationStar stylus kit, part clamping set,pallet frame, rotary table, opticalconfocal white light distance sensor, workpiece temperature sensor,measuring lab illuminationControllerRegulationsZEISS O-INSPECT complies with EC machinery directive 2006/42/EC and EMC directive 2014/30/EU.DisposalZEISS products and packaging returned to us are disposed of in accordance with applicable legal provisions.Certifications/accreditationsQuality management systemISO 9001:2008; VDA 6, Parts 4, 2. Issue 2005Environmental management systemISO 14001:2004Occupational health & safety management systemsBS OHSAS 18001:2007AccreditedISO/IEC 17025:2005EN 60 022 0343IX Printed in Germany. CZ-XI/2017Subject to changes in design and scope of delivery and due to ongoing technical development.Printed on chlorine-free bleached paper. Carl Zeiss Industrielle Messtechnik GmbHApprovals

MPE complies with ISO 10360-7:2011 PFV2D 5) in µm 18 C - 22 C 1.2 1.2 1.2 1) ZEISS VAST XXT: acceptance test with TL3 module; stylus length of 70 mm and stylus tip diameter of 8 mm.

Related Documents:

ZEISS GT2 3D 1.4 ZEISS GT2 3D Short 1.5 ZEISS Individual Single Vision 1.6 ZEISS 3DSingle Vision 1.7 SOLA HDV 1.8 SOLA Elan HDV 1.9 SOLA Elan HD 1.10 SOLA Elan Short 1.11 SOLAOne HD 1.12 Compact ULTRA HD 1.13 AO Easy HD 1.14 SOLA ATL HD Single Vision 1.15 Customized Wrap Rx Only Lenses ZEISS Individual

The CMM specifications are only valid when using original accessories by ZEISS. The specified parameters are observed in the application of the internal test instructions for acceptance testing and in the use of the released standards in accordance with the ISO 10360 series. ZEISS VAST gold 1) ZEISS VAST XT gold1) ZEISS VAST XTR gold1)

CUSTOMER DOCK # DOCK # DOCK # DOCK # Leveler Model: Serial # Serial # Serial # Serial # 1 Clean debris from pit 2 Inspect deck and lip 3 Inspect toe guards 4 Inspect any weather seal 5 Tighten all nuts & bolts 6 Inspect all welds 7 Inspect rear hinge 8 Inspect & lubricate front hinge 9 Inspect hydraulic cylinders & hoses 10 Inspect/tighten as req'd hydraulic fittings

BEST Zeiss Individual PAL Zeiss Individual SV BETTER Zeiss GT2 3DV Zeiss 3D SV GOOD Zeiss GT2 3D / short Electronic Measuring The wave of the future All dispensaries will have one As common as the corneal reflex pupillometer Takes frame measurements Takes POW measurements High degree

ZEISS provides a broad spectrum of precision lenses for better vision; from endless-frame and easy-to-handle options with high visual performance to optimally individualised solutions. GT2 3D Gradal Individual EyeFit Gradal Plus ZEISS Progressive Superb ZEISS Progressive Individual 2 ZEISS Progre

of the measuring room. ZEISS is a machine manufacturer, calibra- tion laboratory, measurement service provider and service technician. We know the challenges in the measuring room from our own experience from A to Z. ZEISS Original Accessories are continuously tested, developed and improved. With ZEISS, you are the leader in the measuring room.

fluorescence microscope (Zeiss Axiovert 40 CFL; Carl Zeiss Inc). Images were captured on a cooled CCD camera. Image acquisition and analysis were performed and visualized by fluorescence, and images were obtained on a PC computer using a Zeiss Axiovert 40 CFL fluorescence microscope with Zeiss Zhen microscope soft-ware (Zeiss Inc).

4 Introduction to Field Theory where c is a suitably chosen speed (generally not the speed of light!). Clearly, the configuration space is the set of maps j µ R4" R4 (1.10) In general we will be interested both in the dynamical evolution of such systems and in their large-scale (thermodynamic) properties. Thus, we will need to determine how a system that, at some time t 0 is in some .