Thermo Scientific Orion Star A214 Benchtop And Star A324 .

2y ago
79 Views
3 Downloads
1.01 MB
56 Pages
Last View : 2m ago
Last Download : 2m ago
Upload by : Fiona Harless
Transcription

Thermo Scientific Orion Star A214 Benchtopand Star A324 Portable pH/ISE MetersReference GuideFor Sales & Service Contact2650 E. 40th Ave. Denver, CO 80205Phone 303-320-4764 Fax 303-322-72421-800-833-7958www.geotechenv.com

Ross and the COIL trade dress are trademarks of Thermo Fisher Scientific, Inc. andits subsidiaries.AQUAfast, AQUASensors, BOD AutoEZ, ionplus, KNIpHE, LogR, No Cal, ORION, perpHect,PerpHecT, pHISA, pHuture, Pure Water, Sage, ROSS, ROSS Ultra, Sure-Flow, Titrator PLUS, andTURBO2 are registered trademarks of Thermo Fisher Scientific, Inc. and its subsidiaries.A , All in One, Aplus, AUTO-BAR, AUTO-CAL, Auto-ID, AUTO-READ, AUTO-STIR,Auto-Test, AutoTration, CISA, digital LogR, DuraProbe, EZ Startup, ISEasy,Low Maintenance Triode, Minimum Stir Requirement, MSR, NISS, Optimum Results, Orion DualStar, Orion Star, SAOB, SMART AVERAGING, SMART STABILITY, Star LogR, Star Navigator 21,Stat Face, Triode are trademarks of Thermo Fisher Scientific, Inc. and its subsidiaries.Guaranteed Success and The Technical Edge are service marks of Thermo Fisher Scientific, Inc.and its subsidiaries. 2011 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property ofThermo Fisher Scientific, Inc. and its subsidiaries.The specifications, descriptions, drawings, ordering information and part numbers within thisdocument are subject to change without notice.This publication supersedes all previous publications on this subject.

Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE MetersChapter 1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Chapter 2Meter Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Meter Connections and Inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Electrodes and Other Connections . . . . . . . . . . . . . . . . . . . .4Connecting Electrode Arm to the Benchtop Meter . . . . . . . .5Meter Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Meter Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Meter Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Chapter 3Meter Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Navigating the Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Setup Menu Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9pH/ISE Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12View Log Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Diagnostics Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Chapter 4pH, RmV and ORP Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15pH Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Calibration Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16RmV Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16ORP Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Chapter 5ISE Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19ISE Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Chapter 6Temperature Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Chapter 7Measurement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Chapter 8Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Saving the Current Meter Settings as a New Method. . . . . . . . . . . . . . . . . . . . . 25Loading an Existing Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Editing, Copying or Deleting an Existing Method. . . . . . . . . . . . . . . . . . . . . . . . . 26

Chapter 9Data Storage and Retrieval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Data Storage Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Read Type Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Computer and Printer Export Settings . . . . . . . . . . . . . . . . .28Data Log Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Viewing the Calibration Log and Data Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Viewing the Calibration Log . . . . . . . . . . . . . . . . . . . . . . . . .29Viewing the Data Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Exporting the Data Log to a Computer or Printer . . . . . . . . . . . . . . . . . . . . . . . . . 30Clearing the Data Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Interfacing a Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Interfacing a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Chapter 10Customer Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Meter Errors and Recommended Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Meter Self Test and Checkout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Meter Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Meter Checkout (pH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Electrode Stability Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Meter Factory Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Meter User Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36About Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Warranty and Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Chapter 11Meter Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Notice of Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WEEE Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Meter Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix 141414243Advanced Meter Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Automatic pH Buffer Recognition Feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Testing a pH Electrode for Automatic Buffer Recognition . .45Electrode Condition Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Multipoint Calibration Curve Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Automatic Blank (Non-linear) Correction Feature . . . . . . . . . . . . . . . . . . . . . . . 48

This page intentionally left blank.

Chapter 1 IntroductionThank you for your purchase of the Orion Star A214 benchtop pH/ISE meter or Star A324 portable pH/ISE meter. Thesemeters are capable of measuring pH, mV, relative mV (RmV), ORP, ISE and temperature in C or F.The Orion Star A214 benchtop pH/ISE meters featuret Q) SBOHF PG UP Q) VOJUT XJUI PS SFTPMVUJPO BOE VQ UP DBMJCSBUJPO QPJOUTt N7 SFMBUJWF N7 BOE 031 SBOHF PG UP N7 XJUI N7 SFTPMVUJPOt *4& SBOHF PG UP XJUI VQ UP UISFF TJHOJmDBOU mHVSF SFTPMVUJPO BOE VQ UP mWF DBMJCSBUJPO QPJOUTt "650 3&"% DPOUJOVPVT XJUI IPME PQUJPO BOE UJNFE NFBTVSFNFOU NPEFTt DBMJCSBUJPO FEJUJOHt QPJOU EBUB MPHt NBOVBM SFBEZ "650 3&"% BOE UJNFE EBUB MPHHJOH GVODUJPOTt *1 SBUFE EVTU BOE TQMBTI SFTJTUBOU IPVTJOHThe Orion Star A324 portable pH/ISE meters featuret Q) SBOHF PG UP Q) VOJUT XJUI PS SFTPMVUJPO BOE VQ UP DBMJCSBUJPO QPJOUTt N7 SFMBUJWF N7 BOE 031 SBOHF PG UP N7 XJUI N7 SFTPMVUJPOt *4& SBOHF PG UP XJUI VQ UP UISFF TJHOJmDBOU mHVSF SFTPMVUJPO BOE VQ UP mWF DBMJCSBUJPO QPJOUTt "650 3&"% DPOUJOVPVT XJUI IPME PQUJPO BOE UJNFE NFBTVSFNFOU NPEFTt DBMJCSBUJPO FEJUJOHt QPJOU EBUB MPHt NBOVBM SFBEZ "650 3&"% BOE UJNFE EBUB MPHHJOH GVODUJPOTt *1 SBUFE EVTU QSPPG BOE XBUFSQSPPG IPVTJOH1MFBTF SFBE UIJT SFGFSFODF HVJEF UIPSPVHIMZ "OZ VTF PVUTJEF PG UIFTF JOTUSVDUJPOT NBZ JOWBMJEBUF ZPVS XBSSBOUZ BOE cause permanent damage to the meter.Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide1

This page intentionally left blank.2Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide

Chapter 2 Meter OverviewMeter Connections and InputsPower Source 1PXFS BEBQUFS JODMVEFE XJUI CFODIUPQ NFUFST TPME TFQBSBUFMZ GPS QPSUBCMF NFUFSTB 4FMFDU UIF BQQSPQSJBUF XBMM TPDLFU QMVH QMBUF b.Slide off the clear plastic cover from the plug plate.D 4MJEF UIF QMVH QMBUF JOUP UIF HSPPWF PO UIF CBDL PG UIF QPXFS BEBQUFS E POOFDU UIF QPXFS BEBQUFS UP UIF NFUFS BOE QPXFS PVUMFU #BUUFSJFT JODMVEFE XJUI QPSUBCMF NFUFST TPME TFQBSBUFMZ GPS CFODIUPQ NFUFSTa.Select four AA alkaline batteries.C POmSN UIBU UIF NFUFS JT QPXFSFE PGG c.Remove the battery compartment cover.J #FODIUPQ NFUFST o QVTI EPXO PO UIF CBUUFSZ DPNQBSUNFOU UBC BOE MJGU UIF CBUUFSZ DPWFS VQ JJ 1PSUBCMF NFUFST o MPPTFO UIF TDSFXT IPMEJOH UIF CBUUFSZ DPWFS SFMFBTF UIF UPQ QPSUJPO PG UIF battery cover from the meter (use a coin or your finger) and release the bottom portion of thebattery cover.E 0SJFOUBUF UIF CBUUFSJFT BT TIPXO JO UIF CBUUFSZ DPNQBSUNFOU IPVTJOH BOE JOTFSU CBUUFSJFT F 3FQMBDF UIF CBUUFSZ DPNQBSUNFOU DPWFS 'PS QPSUBCMF NFUFST o SFQMBDF UIF TDSFXT Orion Star A Series BenchtopOrion Star A Series Portable3FNPWF TDSFXT1VTI EPXO PO UBC BOE MJGU UIF battery coverThermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide3

Electrodes and Other Connections1. Prepare the pH electrode, ion selective electrode (ISE) and any other applicable electrodes according to the directionsin the electrode user guide. POOFDU UIF BQQSPQSJBUF JUFNT BT MBCFMFE PO UIF NFUFS BOE BT TIPXO JO UIF mHVSF CFMPX GroundDO/RDOPowerRef.ATC/CONBNCStirrerUSBRS232Star A214 Meter Back PanelDO/RDOATC/CONDREFUSBBNCPOWERRS232Star A324 Meter Back Panelt #/ o *OQVU GPS Q) FMFDUSPEF JPO TFMFDUJWF FMFDUSPEF *4& PS 031 SFEPY FMFDUSPEF XJUI #/ PS XBUFSQSPPG #/ DPOOFDUPS t 3&' o *OQVU GPS SFGFSFODF FMFDUSPEF XJUI TUBOEBSE NN QJO UJQ DPOOFDUPS t "5 0/ o *OQVU GPS "5 QSPCF XJUI QJO .JOJ%*/ DPOOFDUPS t (SPVOE o *OQVU GPS B HSPVOE XJSF XJUI B TUBOEBSE QJO UJQ DPOOFDUPS Orion Star A214 benchtop meters only.t 1PXFS o *OQVU GPS UIF QPXFS BEBQUFS t 4UJSSFS o *OQVU GPS UIF TUJSSFS QSPCF BU /P Orion Star A214 benchtop meters only.t 64# o *OQVU GPS UIF 64# DBCMF VTFE UP DPOOFDU UIF NFUFS UP B QSJOUFS PS DPNQVUFS t 34 o *OQVU GPS UIF 34 DBCMF VTFE UP DPOOFDU UIF NFUFS UP B QSJOUFS PS DPNQVUFS 4Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide

Connecting Electrode Arm to an Orion Star A Series Benchtop MeterOrion Star A series benchtop meters include an electrode arm that can be attached to either side of the meter. 6OQBDL UIF FMFDUSPEF BSN BOE CBTF 2. Choose the side of the meter to attach the arm. 6TF B DMFBO TVSGBDF BOE UVSO UIF NFUFS PWFS 3FMFBTF UIF FYJTUJOH TDSFX GSPN UIF CBDL PG UIF NFUFS "MJHO UIF FMFDUSPEF BSN CBTF XJUI UIF DJSDMFT BU UIF CPUUPN PG UIF NFUFS 5IF NFUBM QPTU PO UIF FMFDUSPEF BSN CBTF should be on the same side as the meter display. 5BLF UIF TDSFX UIBU XBT SFNPWFE BOE VTF JU UP TFDVSF UIF FMFDUSPEF BSN CBTF UP UIF NFUFS 5VSO UIF NFUFS PWFS 1MBDF UIF IPMF BU UIF CPUUPN PG UIF FMFDUSPEF BSN POUP UIF NFUBM QPTU PO UIF FMFDUSPEF BSN CBTF Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide5

Meter DisplayDisplay IconDescription4IPXO XIFO UIF NFUFS JT SVOOJOH PO " QPXFS 4IPXO XIFO UIF NFUFS IBT CBUUFSJFT JOTUBMMFE Indicates data is being sent to a computer or printer.Indicates data is being sent to the data log.4IPXO XIFO BO BMBSN JT TFU BOE UIF BMBSN WBMVF JT SFBDIFE *OEJDBUFT UIF NFUFS JT TFU UP CF JOUFSGBDFE XJUI B QSJOUFS PS DPNQVUFS WJB UIF 34 QPSU *OEJDBUFT UIF NFUFS JT TFU UP CF JOUFSGBDFE XJUI B QSJOUFS PS DPNQVUFS WJB UIF 64# QPSU %JTQMBZT UIF UJNF BOE EBUF FOUFSFE JO UIF TFUVQ NFOV C25.0 ATCHOLD%JTQMBZT UIF DVSSFOU UFNQFSBUVSF CBTFE PO UIF UFNQFSBUVSF QSPCF SFBEJOH PS FOUFSFE UFNQFSBUVSF WBMVF 4IPXT UIF PSJHJO PG UIF UFNQFSBUVSF BT ."/ FOUFSFE UFNQFSBUVSF PS "5 UFNQFSBUVSF QSPCF 4IPXO XIFO is pressed and the displayed measurement is frozen.*OEJDBUFT B DBMJCSBUJPO XBT TVDDFTTGVMMZ DPNQMFUFE *DPO XJMM CMJOL XIFO UIF DBMJCSBUJPO BMBSN JT TFU BOE UIF alarm value is reached.*OEJDBUFT UIF Q) FMFDUSPEF DPOEJUJPO BT HPPE UXP CBST GBJS POF CBS PS CBE TMBTI UISPVHI JU CBTFE PO UIF MBTU saved calibration and measurement stability.M100Indicates a method is in use and the number of the method being used.pH*OEJDBUFT UIF UZQF PG NFBTVSFNFOU BOE EFUFSNJOFT UIF UZQF PG DBMJCSBUJPO UIBU XJMM CF QFSGPSNFE readySpecifies the stability of the electrode as stabilizing or ready.4IPXO XIFO UIF NFUFS JT JO "650 3&"% NPEF 5IF JDPO XJMM CMJOL XIJMF UIF SFBEJOH JT TUBCJMJ[JOH BOE TUPQ CMJOLJOH XIFO UIF SFBEJOH JT TUBCMF BOE UIF NFBTVSFNFOU JT MPDLFE PO UIF EJTQMBZ 7.000 pH0.0mV%JTQMBZT UIF NFBTVSFNFOU WBMVF CBTFE PO UIF MBTU TBWFE DBMJCSBUJPO BOE DVSSFOU FMFDUSPEF SFBEJOH 6OJUT BSF TIPXO UP UIF SJHIU PG UIF WBMVF 4IPXT UIF SBX NJMMJWPMU SFBEJOH PG UIF FMFDUSPEF BUFFERS: 1.68, 4IPXT UIF CVGGFS WBMVFT VTFE GPS UIF MBTU TBWFE DBMJCSBUJPO pH mode only.STANDARDS:0.10 1.0 104IPXT UIF TUBOEBSE WBMVFT VTFE GPS UIF MBTU TBWFE DBMJCSBUJPO ISE mode only.4IPXT UIF PQFSBUPS BTTJHOFE TBNQMF *% OVNCFS 4IPXT UIF PQFSBUPS BTTJHOFE VTFS *% OVNCFS 6cal%JTQMBZT UIF BDUJPO UIBU XJMM CF QFSGPSNFE XIFO f1 is pressed.sample ID%JTQMBZT UIF BDUJPO UIBU XJMM CF QFSGPSNFE XIFO f2 is pressed.channel%JTQMBZT UIF BDUJPO UIBU XJMM CF QFSGPSNFE XIFO f3 is pressed.Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide

Meter Keypadmeasure(esc)Orion Star A200and A300 SeriesPortable KeypadOrion Star A200 SeriesBenchtop Keypadsetupholdmodelog/printPress the f1, f2 and f3 GVODUJPO LFZT UP QFSGPSN UIF BDUJPO TIPXO BCPWF FBDI LFZ PO UIF EJTQMBZ Press to turn the meter on.8IFO UIF NFUFS JT PO QSFTT BOE RVJDLMZ SFMFBTF UP UVSO UIF EJTQMBZ CBDLMJHIU PO PS PGG PS IPME EPXO UP turn the meter off.In the measurement mode, press to take a measurement.In the setup, calibration and other menus, press to escape the current menu and return to themeasurement mode.In the measurement mode, press to enter the setup menu.In the setup, calibration and other menus, press to scroll up through a list of options.In the continuous measurement mode, press to hold (freeze) the displayed measurement and pressagain to release (unfreeze) the measurement.In the setup, calibration and other menus, press to scroll left through a list of options.In the measurement mode, press to change the displayed measurement mode. Options for channel 1 arepH, mV, RmV (relative mV), ORP and ISE.In the setup, calibration and other menus, press to scroll right through a list of options.In the measurement mode, press to log or print a measurement.*O UIF TFUVQ DBMJCSBUJPO BOE PUIFS NFOVT QSFTT UP TDSPMM EPXO UISPVHI B MJTU PG PQUJPOT 1SFTT UP WJFX UIF EBUB MPH BOE DBMJCSBUJPO MPH Orion Star A214 benchtop meters only.Press to start or stop the stirrer probe. Orion Star A214 benchtop meters only.Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide7

1. Press UP QPXFS UIF NFUFS PO 8IFO UIF NFUFS JT PO QSFTT BOE RVJDLMZ SFMFBTF on or off or press and hold2. Pressto turn the backlight GPS BCPVU UISFF TFDPOET UP QPXFS UIF NFUFS PGG UP FYJU BOZ NFUFS GVODUJPO BOE SFUVSO UP UIF NFBTVSFNFOU NPEF 3. The f1, f2, and f3 GVODUJPO LFZT QFSGPSN B WBSJFUZ PG NFUFS PQFSBUJPOT 5IF NFOV TQFDJmD PQFSBUJPO JT TIPXO BCPWF FBDI LFZ PO UIF EJTQMBZ 'PS FYBNQMF QSFTT f1 in the measurement mode to start a calibration.,4. The,or LFZT BSF VTFE BT OBWJHBUJPO LFZT VQ SJHIU EPXO MFGU XIFO TFMFDUJOH GSPN B mYFE list or grid of meter options. In the measurement mode, these keys are used to access the setup menu, changethe measurement mode, manually log or print a measurement and hold (freeze) a displayed measurement in thecontinuous measurement mode. *O UIF DPOUJOVPVT NFBTVSFNFOU NPEF XIFO is pressed and the measurement is being held (frozen), only the LFZ XJMM CF GVODUJPOBM VOUJM UIF NFBTVSFNFOU JT SFMFBTFE VOGSP[FO 1SFTT UP UVSO PO PS PGG UIF TUJSSFS QSPCF BU /P Orion Star A214 benchtop meters only. 1SFTT to access the calibration log and data log. Orion Star A214 benchtop meters only.Meter Maintenance'PS SPVUJOF NFUFS NBJOUFOBODF EVTU BOE XJQF UIF NFUFS XJUI B EBNQ DMPUI *G OFDFTTBSZ XBSN XBUFS PS B NJME XBUFS CBTFE EFUFSHFOU DBO CF VTFE .FUFS NBJOUFOBODF DBO CF QFSGPSNFE PO B EBJMZ XFFLMZ PS NPOUIMZ CBTJT BT SFRVJSFE CZ UIF FOWJSPONFOU JO XIJDI UIF NFUFS JT PQFSBUFE *NNFEJBUFMZ SFNPWF BOZ TQJMMFE TVCTUBODF GSPN UIF meter using the proper cleaning procedure for the type of spill.8Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide

Chapter 3 Meter SetupNavigating the Setup Menu1. In the measurement mode, pressto enter the main setup menu.2. Press,,orto scroll through the main setup menu options. Press f3 (select) toselect a main setup menu option.3. Pressorto scroll through setup submenu options. Press f3 (select) to select a setup submenu option.4. Perform the appropriate actions to set the desired parameter in the setup submenus.a.To select a value from a list of options, pressf3 (select) to set the value.b.To enter a numeric value, use the numeric entry screen.orto highlight the desired value and pressi. Select the value to be entered by pressing f3 (select) or f3 (edit) 5IF OVNFSJD FOUSZ TDSFFO XJMM QPQVQ PO UIF EJTQMBZ ii. Press,,orto highlight a number, decimal place or negative sign; pressf3 (enter)

Thermo Scientific Orion Star A214 Benchtop and Star A324 Portable pH/ISE Meter Reference Guide 5 Connecting Electrode Arm to an Orion Star A Series Benchtop Meter Orion Star A series benchtop meters include an electrode arm that can be attached to either side of the meter. 6OQBDL UIF FMFDUSPEF BSN BOE CBTF 2.

Related Documents:

Star 1 Star 2 Star 3 Star 4 Star 5 2012-2013 Star 1 Star 2 Star 3 Star 4 Star 5 2014-2015 Star 1 Star 2 Star 3 Star 4 Star 5 2016-2017 Star 1 Star 2 Star 3 Star 4 Star 5 Star Label Up-gradation for Split AC 2018-2019 Star 1 Star 2 Star 3 Star 4 Star 5 Star Level Min EER Max EER Star 1 2.70 2.89 Star 2 2.90 2.99 Star 3 3.10 3.29 Star 4 3.30 3.49 .

6 Thermo Scientific Orion VERSA STAR Advanced Electrochemistry Benchtop Meter Electrode/Probe Attachments to the Module The same electrodes and probes compatible with the Orion Star, Star Plus and Star A series meters can be used with the Orion VERSA STAR meter and module system. 1.

Thermo Scientific Orion Star and Star Plus Meter User Guide EN-1 Chapter I Introduction Congratulations! You have selected an industry-leading Thermo Scientific Orion Star or Star Plus series meter that is designed for electrochemistry measurements in the field or in the laboratory .

Thermo Scientific Orion Star and Star Plus Series Meter User Guide EN-1 Chapter I ntroduction Congratulations! You have selected an industry-leading Thermo Scientific Orion Star or Star Plus series meter that is designed for electrochemistry measurements in the field or in the laboratory .

tion (Thermo Orion 12.9 mS Conductivity Standard, Orion 011006), 0.01 molar KCl (Thermo Orion 1413 S Conductivity Standard, Orion 011007) or entry of the temperature-compensated conductivity of another known calibration solution. To protect the batteries, the meter switches off automati-cally when not operated for a longer time than specified.

PULSE ARC / MICRO TIG WELDERS Orion 200i Welder Orion 200 i Welding Power Supply, (welder, swing arm, microscope and all acc. come in one box) Orion 250s Arm Orion 250s Micro Pulse Arc Welder with Free-Floating Microscope Package (Orion Arm) (2 boxes) Orion 250s ADL Orion 250s Micro Pulse A

Thermo Scientific Orion VERSA STAR Advanced Electrochemistry Benchtop Meter 1 Chapter 1 Introduction Thank you for your purchase of the Thermo Scientific Orion VERSA STAR Advanced Electrochemistry Benchtop Meter. This meter allows for up to four channels to be configured in any combination through its modular design. Five modules

There are also four possible examples of themes which could be followed. Each has a set of readings with an introduction to them. This could either act as a prompt to whoever is preaching, or could be read when there is no preacher present, as sometimes happens in our rural groups of churches where each church holds its own service. There is a linked prayer and suggestions for the music .