Imperia Glass Railing-User Guide2021

Aluminum ExtrusionsGLASS RAILING

GLASS RAILINGK1-NOA #20-1021.03- Designed for interior and exterior Railing Applications- Tempered laminated glass with Sentryglas Interlayer- Supports Surface Mount, Embed Mount, Inclined and FasciaMounting Methods- Fast and simple installation. Reduces Installation Labor Time by50%Copyright -Product patented by Aluwind S.Aaluwindus.com

6063 AlloyT6 TemperAluminum ExtrusionsTOP OF SLAB OPTIONS2.94”(74.8mm)2.6”(66.5mm)LED housingKIT: K3Top mount base shoe(max. panel height 43”)InteriorContinuous base shoeTop mount base shoe(max. panel height 59”)Continuous and modular base shoeKIT: K1KIT: K15Exterior3.92”(99.8mm)5.22”(132.8mm)4.72” (120mm)3.18”(81mm)F-Shaped Floor Mount(max. panel height 19”)Continuous base shoeKIT: K16K1 UP TO771lb (350Kg.)K15 UP TO1984lb (900Kg.)K16 UP TO330lb (150Kg.)Use proper glazingUse proper glazingUse proper glazing5.39”(137mm)5.39”(137mm)Glass fence(max. panel height 118”)Continuous and modular base shoeKIT: K11K11 UP TO1984lb (900Kg.)Use proper mm)3.99”(101.5mm)Top mount base shoe(max. panel height 43”)Continuous and modular base shoeKIT: K14LED housingKIT: K5Curved base shoeContinuous base shoeKIT: K4K14 UP TO1433lb (650Kg.)K4 UP TO220lb (100Kg.)Use proper glazingUse proper glazingCopyright -Product patented by Aluwind S.A

6063 AlloyT6 TemperAluminum ExtrusionsMODULE OPTIONSHANDRAIL lKIT: K7Continuous base shoeContinuous base shoeKIT: K6KIT: K17K17 UP TO330lb (150Kg.)K6 UP TO1322lb (600Kg.)Use proper glazingUse proper glazingSquareHandrailKIT: K82.28”(58mm)1.90”(48.3mm)Embedded in slab(max. panel height 19”)Embedded in slab(max. panel height 43”)1.65”(42mm)1.49”(38mm)Opciones FRENTE 2”(74.3mm)Fascia Mountmax. panel height 43”Fascia Mountmax. panel height 43”Continuous and modular base shoeContinuous base shoeKIT: K12KIT: K10K12 UP TO1212lb (550Kg.)K10 UO TO330lb (150Kg.)Use proper glazingUse proper glazingCopyright -Product patented by Aluwind S.ARoundHandrailKIT: K9

ImperiaGlass railingAluminum ExtrusionsACCESSORIESSKUDESCRIPTIONStainless steel angleQTYUnitALUWIND1Piece1 to hold the handrail endagainst the wallALUWIND1PieceWe recommend spacing theBrackets 39 inches s steel squared wall bracketALUWIND1PieceWe recommend spacing theBrackets 39 inches apartESK9ADDITIONALACCESSORYK7/K9 aluminum corner jointALUWIND1PieceInsert one per jointESK1ADDITIONALACCESSORYK1 / K8 aluminum corner jointALUWIND1PieceInsert one per jointHERRADDITIONALACCESSORYChock spatuleALUWIND1PieceStainless steel 90 (folded) glassconnector for 10mm-21mm temperedglassALUWIND1PieceInsert one per glasscorner jointStainless steel U folded channel for 10mm-21mm tempered glassALUWIND1PieceInsert one per glasslinear jointALUWIND1PieceInsert one per glasscorner joint1PieceInsert one per glasslinear joint1PieceWe recommend spacing theBrackets 39 inches apartPieceUser-defined9010/9012/ ADDITIONAL9016/9020 ACCESSORYAR10/AR12/ ADDITIONALAR16/AR20 ACCESSORYStainless steel handrail bracketYM15ADDITIONALACCESSORYYM15 glass connector (90 )YM16ADDITIONALACCESSORYYM16 glass connector (180 )ASP1ADDITIONALACCESSORYStainless steel glass connector withhandrail bracketALUWINDAI01ADDITIONALACCESSORYSuplemento de alto impacto 3mmALUWINDRLEDADDITIONALACCESSORYLED String 5630 / 600 1,2A/mTRANADDITIONALACCESSORYALUWIND1-Stripampere per meter12v power adapter[1-5]Amper--1[m] 1[A]2[m] 2[A]5[m] 5[A]All along the handrail/led ser-definedADDITIONALACCESSORYSilicone weather- proofing sealantGAK6ADDITIONALACCESSORYGRAMPA DE AMUREVIDADDITIONALACCESSORYVIDRIOS CON NSTALACIONPieceUser-definedSCL1DOW CORNING 791ALUWINDCopyright -Product patented by Aluwind S.A

ImperiaGlass railingAluminum YUnitUsageTK01ADDITIONALACCESSORYK1 plastic end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK07ADDITIONALACCESSORYK7 plastic end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK08ADDITIONALACCESSORYK8 plastic end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK09ADDITIONALACCESSORYK9 stainless steel end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK05ADDITIONALACCESSORYPiece1 placed at the endof the profile.Used for aestheticfinishTK04ADDITIONALACCESSORYK4 stainless steel end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK03ADDITIONALACCESSORYK1 K3 stainless steel end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK33ADDITIONALACCESSORYK1 K3 (on both sides)stainless steel end capALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK6RADDITIONALACCESSORYK6 stainless steel end capwith hose fittingALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishTK6RADDITIONALACCESSORYK6 stainless steel end capwith hose elbowALUWIND1Piece1 placed at the endof the profile.Used for aestheticfinishK5 stainless steel end capALUWIND1Copyright -Product patented by Aluwind S.A

ImperiaGlass railingAluminum ExtrusionsCHEMICAL DDITIONALACCESSORYHDM5ADDITIONALHDM 500 ACCESSORY(2005641)R100RE-100(2123384)Re-10 anchoring system (cod.2142303)injectable epoxy mortar for anchoring inconcreteManual anchor adhesive dispenserhdm-500 (cod.2005641)SUPPLIERIMAGEUsageInject the anchorbefore insertingthe threaded rodHILTIUSA19.61 fl ozHILTIUSAPieceUser-defined11.16fl oz16.91 ozInject the anchorbefore insertingthe threaded rodRe-100 anchoring system (cod.2123384)High-performance injectable epoxy mortarHILTIUSAADDITIONALACCESSORYUnit** Requires HIT-CB500 cartridge holdernot included.R500RE-500(2123404)Re-500 anchoring system (cod.2123404)ADDITIONALACCESSORYResina epóxico, alto rendimiento paraconexiones barras/anclajes de altas cargas1x Paquete delámina doble1x MezcladorHILTIUSAInject the anchorbefore insertingthe threaded rod** Requires HIT-CB500 cartridge holdernot included.HITCHDM 500 ADDITIONALACCESSORYHIT-CB(3560133)Manual dispenser with cartridge holderHit-cb (COD.3560133)RE-100RE-5001 dispenserHILTIUSA1 cartridgeholderUser-definedSCREW ONSUPPLIERIMAGEUnitUsageADDITIONALACCESSORYScrew anchor kh-ez(cod.418059) Impact wrench 22v siw22T-A 1/2"(cod.405032)HILTIUSAPieceUser-definedCompact 22v Battery pack eUser-definedSIW 22T-A ACCESSORY1/2"(405032)ADDITIONALB22VACCESSORYB 22/5.2(2136396)CBATADDITIONAL Multi-voltage compact charger for allC 4/36-90 ACCESSORY Hilti Li-ion batteries (cod.2026282)2026282Copyright -Product patented by Aluwind S.A

ImperiaGlass railingAluminum ExtrusionsAW 1001 Aluminum handrailStainless steel alignment boltTOP MOUNT BASE SHOEAluminium joint CornersRubber gasketLed stripPlastic diffuserRAILING HEIGHT 44” (1100mm) MAX.EXTERIOR1/4”(6mm)- 5/16”(8mm)3/8”(10mm) HEATSTRENGTHENED or glazinggasketDow CorningSiliconeDow Corning SiliconeL SettingblockABS chockAW 9100Base shoe4.72” (120mm)0.060”(1.52mm) SentryglasAW1003Mount aluminumLED profile housingLed stripPlastic diffuser5mm Stainless steelalignment boltDow Corning Silicone3/8" Stainless steelNut3/8" Stainless steelWasherWater drainageCONTINUOUS BASE SHOERubber washer100% of the glass width mustbe contained in the profile4" MIN. EMBEDMENT3/8" Stainless steelThreaded rodHilti chemicalanchoring systemK1-NOA #20-1021.03FBC (Florida Builing Code 2020)TAS 201-94TAS 202-94ANSI Z97.15" MIN. EDGE DISTANCENOT SUITABLE FOR MODULAR USE* Optional mechanical anchor KH-EZMechanical anchors do not guarantee water tightness.It is recommended to use a rubberwasher and seal the profile sides.

ImperiaGlass railingAluminum Extrusions1- Place the profile and mark the concrete surfaceVERY IMPORTANT!*Align the Base Shoe and previously markthe required holes using Ø6mm drill bitin the concrete before drillingLEVEL THE SURFACECHECK THE PROFILE IS PERFECTLYLEVELLED otherwise the glass won’tbe perfectly vertical2-Drill 9cm into concrete slab and clean the dust12140904515Drill Ø12mm holes for threaded rod and chemical anchorDrill Ø10mm holes for mechanical anchor250253.Inject chemical anchor0WARNING!Drill bit must be buried minimum90mm into slab. Take account ofthe floor binder as well as theprofile thickness.Set Base Shoe in place, making surethe Base Shoe holes match the slab holes3. Insert threaded rodIt is MANDATORY to cleanthe dust from the slab-holesbefore injecting the chemicalanchor/ inserting themechanichal anchor2. Place base shoe1. Inject chemical anchorIt is VERY IMPORTANT toplace the base shoe beforeinserting the threaded rod forproper alignment

ImperiaGlass railingAluminum Extrusions6- Tighten nuts and washers14mm Socket wrenchNote: Tighten until achieving6Kn of torque in a dried and cleanconditionVERY IMPORTANT!The profile must always be in full contactwith the surface3/8” Nut3/8” Washer5- Place all L setting blocks into the base shoecavity.250100Note: L gaskets must beplaced between anchoringsystem bolts.

ImperiaGlass railingAluminum Extrusions6- Glass Panel InstallationBefore installing the glass panels the L-Setting Blocksmust be adhered onto the bottom of the base shoe7- Plastic chocks installationEach chock mustbe placed right infront of an L250mm spacingbetween chocks8- Use Installation/Removal Tool (spatule)to lock the glass securely in placeMetal spatuleWarning: keep the tool separeted fromthe glass when installing the chocksMake sure the glass is plumb and perfectlyaligned with adjacent panelsPush the chockinto the profile’scavity Roll in exterior gasket90Put the glass aboveL setting BlockRoll in the Interior Glazinggasket

ImperiaGlass railingAluminum ExtrusionsK11- GLASS FENCEInterior glazing gasket (varies)code 2749 (8 8mm)code 2753(10 10mm)Exterior glazinggasket code 2053AW D01Led profilehousingHeat strenghtenedglass8 8/ 10 10exteriorrubber gasketcode 28217.75” (197mm)Sentryglasinterlayerde 0.89mmAW D04Top columnABS chockL settingblockAW D03Base shoeLEDScrew M5X20mmAW D02Bottom coverDiffuser3/8" stainlesssteel threaded rod3/8" stainless steelnut3/8" stainless steelwasher.Chemicalanchoringsystem5.39” (137mm)3.54”(90mm)

ImperiaGlass railingAluminum ExtrusionsK12- FASCIA MOUNT1/4”(6mm)- 5/16”(8mm)- 3/8”(10mm)HEAT STRENGTHENED GLASSInterior rubber gasket (varies)AW D07- U Channel11x50 AngleExterior glazinggasket code 29210.060”(1.52mm)SentryglasInterlayer3.54” (90mm.)PlasticchockL settingblock5.35” (136mm.)Chemical anchoringsystem3/8" stainlesssteel threaded rod3/8" stainless steelnut3/8" stainless steelwasher.AW D05Base shoeAWD06cover2.91” (74mm.)

ImperiaGlass railingAluminum ExtrusionsK12- Fascia MountContinuous250500250250Modular system(optional)*module length 9.87” (250mm)or 19.68”(500mm)

ImperiaGlass railingAluminum ExtrusionsK15- Top Mount base shoe(max. panel height 59”)1/4”(6mm)- 5/16”(8mm)3/8”(10mm)HEAT STRENGTHENEDGLASSExterior glazinggasket code 2921ExteriorgasketABS chockL Settingblock5.23” (133mm)RAILING HEIGHT 59” (1500mm) MAX.Interior rubber gasket(varies)AW 1016Base shoeAW 1017cover3/8" stainless steelnut3/8" Stainless steel3/8" stainless steelwasher.Rubber washer3/8" Stainless steel5" MIN. EDGE DISTANCE2.83”(72mm)Hilti chemicalanchoring system3/8" Stainless steelThreaded rod4" (900mm)MIN. EMBEDMENT

ImperiaGlass railingAluminum ExtrusionsK15- SISTEMA SOBRE LOSAContinuous250500250250Modular system(optional)*module length 9.87” (250mm)or 19.68”(500mm)

ImperiaGlass railingExtruded AluminumHIDDEN BASE CHANNEL2.16”(55mm)Stainless steel alignment bolt1.69”(43mm)Aluminum jointAW1001LED HandrailHandrail gasket1/4”(6mm)- 5/16”(8mm)- 3/8”(10mm)HEAT STRENGTHENED GLASS1.89”(48mm)0.060”(1.52mm) SentryglasInterlayerRemoveafter pouringthe concrete slabRubber T gasketprevents the entry ofconcrete mix(optional)Exterior gasketInterior glazinggasket1122 Angleporcelain tile4.44”(113mm)5" (110mm)5”MIN. EDGE DISTANCE(110mm)Plastic chockAW1008 hidden baseL SettingblockAluminumanchorCONTINUOUS BASE SHOE100% of the glass width mustbe contained in the profileNOT SUITABLE FOR MODULAR USE