Application/Specification Guide PAN-WAY Twin-70 Surface .
Application/SpecificationGuideNETWORK SYSTEMS GROUPPAN-WAY Twin-70Surface Raceway SystemPAN-WAY Twin-70 Surface Raceway is an aesthetically pleasingmulti-channel raceway that provides separate covers forcommunications and power cabling channels. Fittings have beendesigned to maintain the TIA/EIA required 1" minimum bend radius ofCategory 5 and Fiber Optic cabling. The raceway is tamper resistant tothe end user yet allows easy access to the installer for moves, addsand changes.Twin-70 raceway is optimized for use with the PAN-NET NetworkCabling System to provide a totally integrated horizontal cablingsolution for Category 5 UTP, ScTP, Coax, Fiber Optic andPower Cabling Systems.FeaturesAdvantages & . BenefitSeparate Covers Throughoutthe System (including the fittings)Maintains complete separation of power and datacabling systemsProvides maximum safety during installation and for moves,adds, and changes1" Bend Radius Control FittingsCables in the raceway won't exceed the minimum 1"bend radius requirement and degrade performanceMaximizes headroom of high performance cabling systems,such as Gigabit Ethernet, Fast Ethernet, Fiber, and ATMMeets TIA/EIA StandardsMeets many warranty requirementsSnap-on Faceplates NOBOXES REQUIREDFaceplates snap directly onto the raceway base eliminat- Lowers the overall installed cost and the number of parts toing the many parts (i.e. junction boxes, brackets, etc)inventory & buynormally required to mountcommunication connectorsCabling can be quickly accessed by removing only onefaceplate, unlike many current systems which requirethe removal of many partsSpeeds moves, adds, and changes. Requires less labor andlowers the cost of maintenanceEach channel has a 70mmopeningAccepts any NEMA standard power or communicationfaceplatesWorks with other manufacturers’ power and communicationfaceplatesUL-5A ListedMeets the latest UL Listing requirements & can be usedfor power cabling up to 600VMaximum safety for power systems, including tamper andimpact resistanceHighly tamper resistantIs very difficult for untrained personel to enter the raceway or remove faceplatesProvides maximum security for the communication cabling andmaximum safety for the power cablingNon-Metallic ConstructionLightweightReduces installer fatigue. Allows for one person installation,reducing labor required to install the racewaySolid Color throughoutWill not chip, peel, rust or corrode. Masks scratchesEasy to cut with standard saws and saw bladesReduces installed cost and the need for special cutting devicesHigh impact resistanceExtremely durable for a long lifeEasy to cut with standard saws and saw bladesReduces installed cost and the need for special cutting devicesAesthically pleasingApplications vary from the classroom to the executive officeDesigner ProfileAvailable in 4 standard colors Matches a wide variety of decors Panduit Corp. 1998All Rights Reserved
PAN-WAY TM Twin-70 Surface Raceway ComponentsDrawing / DimensionsPart NumberColorT702BIW8T702BEI8T702BIG8T702BWH8Off WhiteElec. IvoryLight GrayWhiteRaceway base for Twin-70 raceway. Supplied ineight (8) foot lengths.T702CIW8T702CEI8T702CIG8T702CWH8Off WhiteElec. IvoryLight GrayWhiteTamper resistant raceway cover for use with Twin70 raceway base. Supplied in eight (8) footlengths. Two (2) feet of cover is required per one(1) foot of base.NOTE: When ordering ten (10) foot lengths insert10 instead of 8 in the part number.Twin-70 Base CouplingT70BCIW-XT70BCEI-XT70BCIG-XT70BCWH-XOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway base. Used to jointwo pieces of Twin-70 base together.Standard package quantity of 10.T-70 Cover CouplerT70CCIW-XT70CCEI-XT70CCIG-XT70CCWH-XOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway cover. Used to jointwo pieces of Twin-70 cover together.Standard package quantity of 10.T702ICIWT702ICEIT702ICIGT702ICWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to join Twin-70raceway at inside corners. Maintains minimum 1"bend radius of cabling.Standard package quantity of 1.T702OCIWT702OCEIT702OCIGT702OCWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to join Twin-70raceway at outside corners. Maintains minimum 1"bend radius of cabling.Standard package quantity of 1.T702RAIWT702RAEIT702RAIGT702RAWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to join sections of Twin-70 raceway to make horizontal 90 right angles. Maintains minimum 1" bend radius ofcabling.Standard package quantity of 1.T702ECIWT702ECEIT702ECIGT702ECWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to terminate orto enter the raceway. Includes breakouts for ½"conduit.Standard package quantity of 1.T702EEIWT702EEEIT702EEIGT702EEWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to enter theraceway through conduit. Includes ½", ¾", 1", 1¼"and 1½" concentric conduit breakouts. Maintainsminimum 1" bend radius of cabling.Standard package quantity of 1.Twin-70 Raceway Baseyx 7.23" (183.6mm)y 1.77" (45.0mm)xTwin-70 Raceway Coverxx 2.76" (70.0mm)Inside Corner Fittingabcea 3.74" (95.0mm)b 1.87" (47.5mm)c 7.51" (190.8mm)d 3.00" (76.2mm)e 3.00" (76.2mm)DescriptionNOTE: When ordering ten (10) foot lengths insert10 instead of 8 in the part number.dOutside Corner Fittingbbaaca 7.51" (190.8mm)b 4.80" (121.9mm)c 3.88" (98.6mm)Right Angle Fittingaa 9.46" (240.3mm)b 8.48” (215.4mm)bEnd Cap Fittingca 1.97" (50.0mm)b 1.25" (31.8mm)c 1.86" (47.2mm)abEntrance End Fittingabcc2a 3.28" (83.8mm)b 6.66" (169.2mm)c 5.56" (141.2mm)
PAN-WAY TM Twin-70 Surface Raceway ComponentsDrawing / DimensionsPart NumberColorT702TIWT702TEIT702TIGT702TWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to join sectionsof Twin-70 raceway to form a "tee" junction. Maintains minimum 1” bend radius of cabling.Standard package quantity of 1.T702TRIWT702TREIT702TRIGT702TRWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to transitionfrom Twin-70 raceway to an undivided T-70 raceway.Standard package quantity of 1.T702TRLIWT702TRLEIT702TRLIGT702TRLWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to transitionfrom Twin-70 raceway to an undivided LD Profileraceway.Standard package quantity of 1.T702TRILight GrayFor use with T702TR or T702TRL fittings. Used totransition from Twin-70 raceway to divided T-70 orLD2P10 raceway.Standard package quantity of 1.T70DW8Light GraySnaps onto rails in raceway base to create separatechannels. Supplied in eight (8) foot lengths.Wire RetainerT70WR-XLight GrayHolds wires in place. Will not interfere with coverinstallation. To add wire or cable, simply removecover and loosen one side of retainer.Standard package quantity of 10.Device BracketT70DB-XLight GrayUsed to quickly mount NEMA standard electricalreceptacles (including GFCI) and screw mount communications faceplates inTwin-70 raceway.Standard packagequantity of 10.Tee Fittingaa 11.95" (303.5mm)b 9.91" (251.7mm)c 9.79" (248.7mm)d 5.07" (128.8mm)e 9.82" (249.4mm)f 8.68" (220.5mm)bcdeDescriptionfTransition Fittingca 6.98" (177.3mm)b 7.22" (183.4mm)c 9.00" (228.6mm)abTransition Fittinga 9.00" (228.6mm)b 6.98" (177.3mm)c 7.22" (183.4mm)abcTransition Fitting Insertaa 6.95" (176.5mm)b 3.62" (91.9mm)bDivider Wallyx 0.75" (19.1mm)y 1.34" (34.0mm)xPAN-WAY Twin-70 Raceway — Technical DataMaterialRigid PVCFlammabilityUL94V-0COLOR CHOICES:IWOff WhiteVoltage RatingApprovalsNECUL-5A 600VACCSA 22.2 No. 62-93 300VACElec. IvoryUL Listed E95425 (raceway)UL Listed E116129 (fittings)Lt. GrayArticle 352BEIIGWHColors shown are approximate.Off White (IW)—Matches International White color standardRAL9001Electrical Ivory (EI)—Matches NEMA and Lucent Electricalivory colorLight Gray (IG)—Matches International Gray color standardRAL7030White (WH)—Panduit standard bright white colorWhite3
PAN-WAY TM Twin-70 Surface Raceway ComponentsDrawing / DimensionsPart NumberSnap-On Bezelaaa 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" (114.3mm)bcSnap-On Bezelabca 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" (114.3mm)Snap-On Bezelabca 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" (114.3mm)Snap-On Bezelabca 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" (114.3mm)Snap-On Faceplatebaca 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" (114.3mm)Snap-On Faceplateabca 2.75" (69.9mm)b 3.80" (96.5mm)c 4.50" 70BH1WHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mount a single 1/2 style insert on Twin-70 raceway in a horizontal run.Standard package quantity of 1.T70BH2IWT70BH2EIT70BH2IGT70BH2WHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mount two1/2 style insert on Twin-70 raceway in a horizontalrun. Standard package quantity of 1.T70B1IWT70B1EIT70B1IGT70B1WHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mount a single 1/2 style insert on Twin-70 raceway in a verticalrun.Standard package quantity of 1.T70B2IWT70B2EIT70B2IGT70B2WHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mount two1/2 style insert on Twin-70 raceway in a vertical run.Standard package quantity of 1.T70PGIWT70PGEIT70PGIGT70PGWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mount rectangular electrical outlets on Twin-70 raceway.Standard package quantity of 1.T70PIWT70PEIT70PIGT70PWHOff WhiteElec. IvoryLight GrayWhiteFor use with Twin-70 raceway. Used to mountduplex electrical outlets on Twin-70 raceway.Standard package quantity of 1.Installation of Faceplates into TWIN-70 RacewaySnap the device bracket intothe slot on the raceway walland then into the slot on thedivider wall.4Install the electrical outletonto the device bracket.Snap-on the electricalfaceplate over the electricaloutlet, and snap-on thecommunication faceplateover the data channel.Complete the installation bysnapping in the MINI-COM Inserts for your voice and datacommunication requirements.
PAN-WAY TM Twin-70 Surface Raceway ComponentsFill Capacities for Twin-70 RacewayThis information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to thewire installation methods, straightness of wires, etc.A 2.05 in²A 1.43 in²Wirefill #1: Power & Data with NoTerminationsA 4.59 in²Wirefill #2: One Twin-70 Channel withNo DevicesIncludes: Divider Wall & Wire RetainerA 3.11 in²A 3.32 in²Wirefill #3: Data Only using DeviceBracket & “Screw-On” FaceplatesWirefill #4: Power using Device Bracket& “Screw-On” FaceplatesIncludes: Device Bracket, CB Vertical Screw-OnFaceplate, Sloped Insert and ModulesIncludes: Device Bracket, CP Faceplate, StandardDuplex Electrical OutletA 4.14 in²A 2.33 in²Wirefill #5: Data Only using“Snap-On FaceplateWirefill #6: TVSS Power Outlet usingDevice Bracket & “Snap-On” FaceplateIncludes: T70BH2 Snap-On Faceplate,Sloped Insert and ModulesIncludes: Device Bracket,T70P Faceplate, TransientSuppression Voltage Receptacle5
PAN-WAY TM Twin-70 Surface Raceway ComponentsFill Capacities for Twin-70 RacewayThis information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to the wireinstallation methods, straightness of wires, etc.SPEC 40% wirefill—the recommended design in cable capacity. Leaves roomfor future moves, adds and changesMAX 60% wirefill—the maximum cable quantity based on cable interweavingand packing factors or UL temperature rise test for electricalFill Capacity Table for:·Electrical·Voice Grade 24 AWG UTP·Data Grade 24 AWG UTPElectrical CablesVoice Grade CablesData Grade CablesAWG24 AWG UTP CM/CMR24 AWG UTP CMSee1412102 pr3 pr4 pr25 prCat. 5 4 prWirefillTHHN/T90DIA. 0.120DIA. 0.150DIA. 0.190DIA. 0.422DIA. 0.217#0.105 0.122 0.153FILLFILLFILLFILLFILLMAX MAX MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAX SPEC MAXRaceway 31B161615517632492030461523Wirefill #2: One Twin-70 Channel with l #3: Data Only using Device Bracket&Screw-On Faceplates3———1101657010644669133450Wirefill #4: Power using Device Bracket &Screw-On Faceplates41513131171767511347709143654Wirefill #5: Data Only using Wirefill #6: TVSS Power Outlet using DeviceBracket & Snap-On Faceplate616161482124537933497102538Wirefill #1: Power & Data No TerminationsFill Capacity Table for:·Data Grade 22 AWG UTP·Data Grade 24, 22 AWG STP· 1A STPData Grade CablesRaceway ChannelConfigurations24 AWG STP CMSee25 pr4 prWirefillDIA. 0.512DIA. 0.250#FILLFILLSPEC MAX SPEC MAX22 AWG UTP CM25 pr4 prDIA. 0.544DIA. 0.234FILLFILLSPEC MAX SPEC MAX22 AWG STP CM25 pr4 prDIA. 0.635DIA. 0.286FILLFILLSPEC MAX SPEC MAX1A22 AWGSTP CMFILLSPEC MAX1A46172545192934131968Wirefill #1: Power & Data No Terminations61B3412172413202391346Wirefill #2: One Twin-70 Channel with NoDevices2913375681243646929431319Wirefill #3: Data Only using Device Bracket &Screw-On Faceplates3692538582943461929913Wirefill #4: Power using Device Bracket &Screw-On Faceplates46102741693146462131914Wirefill #5: Data Only using Snap-OnFaceplates5812345171139585826391117Wirefill #6: TVSS Power Outlet using DeviceBracket & Snap-On Faceplate6571928462233341522610
PAN-WAY TM Twin-70 Surface Raceway ComponentsFill Capacities for Twin-70 RacewayThis information is to be used as a guide in selecting the proper size raceway. The maximum amounts may vary according to thewire installation methods, straightness of wires, etc.SPEC 40% wirefill—the recommended design in cable capacity. Leavesroom for future moves, adds and changesMAX 60% wirefill—the maximum cable quantity based on cable interweaving and packing factors or UL temperature rise test for electricalFill Capacity Table for:·Coax CablesSeeWirefill#Raceway ChannelConfigurationsRG6/uDIA. 0.270FILLSPEC MAXRG11/uDIA. 0.405FILLSPEC MAXCoax CablesRG58/uDIA. 0.193FILLSPEC MAXRG59/uDIA. 0.242FILLSPEC MAXRG62A/uDIA. 0.242FILLSPEC ll #2: One Twin-70 Channel with No Devices232481421639440604060Wirefill #3: Data Only using Device Bracket & Screw-On Faceplates322331014436427412741Wirefill #4: Power using Device Bracket & Screw-On Faceplates423351015456829432943Wirefill #5: Data Only using Snap-On Faceplates529431319578536543654Wirefill #6: TVSS Power Outlet using Device Bracket & Snap-On Faceplate61624711324820302030Wirefill #1: Power & Data No TerminationsFill Capacity Table for:·Fiber Optic Cable (62.5/125mm)Raceway ChannelConfigurations·Signal CablesFiber Optic Cables (62.5/125mm)2Strand4 Strand6 StrandSeeWirefill DIA. 0.175DIA. 0.175DIA. 0.210#FILLFILLFILLSPEC MAX SPEC MAX SPEC MAX18AWGDIA. 0.066FILLSPEC MAXSignal Cables20 AWG22 AWGDIA. 0.057DIA. 0.050FILLFILLSPEC MAX SPEC MAX24 AWGDIA. 0.044FILLSPEC 61725167251224336291437376565Wirefill #2: One Twin-70 Channel with NoDevices27611576115538053780572010809361403 1208 1812Wirefill #3: Data Only using Device Bracket& Screw-On refill #4: Power using Device Bracket &Screw-On irefill #5: Data Only using 6 1090 1634Wirefill #6: TVSS Power Outlet using DeviceBracket & Snap-On Faceplate6395839582740273409365548475712Wirefill #1: Power & Data No Terminations613920Raceway Cutting Instructions:For small quantities, use a fine tooth handsaw. For larger quantities use a plastic cutting saw blade for clean burr-freecuts. Recommend: Carbide 80T or 100T;.090" thickness,.125" kerf.7
PAN-WAY TM Twin-70 Surface Raceway ComponentsPAN-WAY Twin-70 Surface Raceway System is part of acomplete line of PANDUIT Surface Raceway ProductsPAN-WAY SurfaceRaceway SystemWiring Duct and Fiber OpticDuct SystemCondensed Full LineElectrical CatalogSA101N60ASA101N64BSA101N13JOur products are warranted to be free from defects in material and workmanship at the time of sale but our obligationunder this warranty is limited to the replacement of any product proved to be defective within 6 months (for product) or90 days (for tools) from the date of delivery. Tool warranty is void if Panduit tools are modified, altered or misused in anyway. Use of Panduit tooling with any product other than the specified Panduit products for which the tool was designed,constitutes misuse. Before using, user shall determine the suitability of the product for his intended use and userassumes all risk and liability whatsoever in connection therewith.Panduit Corp.17301 Ridgeland AvenueTinley Park, IL 60477-3091Phone: 800-777-3300, Ext. 8287FAX: 815-836-1811Internet: INFO@PANDUIT.COMWebsite: http://www.panduit.comPanduit CanadaDiv. of Panduit Corp.140 Amber StreetMarkham, Ontario L3R 3J8Phone: 800-387-9689FAX: 905-475-6998WORLDWI DE SUB SIDI ARIES AND S ALES OFFICESThis warranty is made in lieu of and excludes all other warranties, expressed or implied. THE IMPLIED WARRANTIESOF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE ARE SPECIFICALLY EXCLUDED. Neither sellernor manufacturer shall be liable for any other injury, loss or damage, whether direct or consequential, arising out of theuse of, or the inability to use, the product.The information contained in this literature is based on our experience to date and is believed to be reliable. It isintended as a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use. Dimensions contained herein are for reference purposesonly. For specific dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or a recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.For Pricing and Further Information –Contact your localPANDUIT Distributor or Sales OfficeSA117N214-LPPrinted in U.S.A.
Surface Raceway System PAN-WAY Twin-70 Surface Raceway is an aesthetically pleasing multi-channel raceway that provides separate covers for communications and power cabling channels. Fittings have been designed to maintain the TIA/EIA required 1" minimum bend radius of Category 5 and Fiber Optic cabling. The raceway is tamper resistant to
The induction cooker can be used with an induction pot/pan. Please remove the grill pan if using your own induction pot/pan. Note: To test if your pot/pan is induction compatible place a magnet (included with induction cooker unit) on the bottom of the pan. If the magnet adheres to the bottom of the pan it is induction compatible.
Taekwondo Canada to be named to the 2019 Pan Am Games Qualification Team and Pan Am Games Team. 1.4 The dates for the 2019 Pan Am Games Qualification Tournament for the Lima Pan Am Games (PAG) at the time of this publication has not been announced. 1.5 The taekwondo event of the 2019 Lima Pan Am Games is scheduled to be held in Lima, Peru
MZ - PAN IETF DEFAULT Palo-Alto MZ - Barracuda Barracuda MZ - Cisco BSD Default Cisco PA-200-ALL.tar.gz Palo-Alto PA-ALL Palo-Alto PAN 0.15.2 Palo-Alto PAN BSD DEFAULT Palo-Alto PAN BSD ISO Palo-Alto PAN IETF CUSTOM Palo-Alto PAN IETF DEFAULT Palo-Alto ScanSafe ScanSafe SonicFW Sonicwall Squid-IPDetect Squid Squid-IPS-1 Squid TZ-0804
The induction cooker can be used with an induction pot/pan. Please remove the grill pan if using your own induction pot/pan. Note: To test if your pot/pan is induction compatible place a magnet (included with induction cooker unit) on the bottom of the pan. If the magnet adheres to the bottom of the pan it is induction compatible.
Hines or Betty Crocker for best results. 4. Do not use generic cake mixes. 5. The correct pan is important. Use a straight sided pan. Be sure you have the proper size and shape cake pan. Cakes baked in too large a pan will be flat and dry. Too small a pan will result in
Note: Bend down retainers (NOT cover locks, see Fig 6-2) with a pair of pliers so that the edge of pans are securely in place. Fig. 6-1 Fig. 6-2 Fig. 5-1 Fig. 5-2 Apron Bar End Pan (RHE) Flashing #8-32 Bolt & Nut (Typ. @ 3 Location) Apron Bar End Pan (RHE) Bottom Pan Flashing Apron Bar End Pan (RHE) Bottom Pan Clip Compress Runner to Allow Clip .
HPKB Design Specification Document Data Mining Design Specification Document Non-Traditional Data Design Specification Document HMI Design Specification Document System Integration Design Specification Document 1.4. Software Design Specification Document Development Gui
Universal Serial Bus Revision 3.2 Specification Universal Serial Bus Revision 3.2 Specification. xxxx and xxxx xxxx and xxxx. Uni-versal Serial Bus Specification Universal Serial Bus Revision 3.2 Specification I2C-Bus Specification I2C-Bus Specification Sys-tem Management Bus Specification
