Flash EX Instruction Manual - PRAMFIX

Flash EX7655 SeriesInstruction ManualRead all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FORFUTURE USE. Record the following information for quick reference. Note: Illustrations are only representativeand not actual. Attach copy of sales receipt.Date Purchased: Model Number: 7655- ColorLocated on the rear right leg.Attach copy of sales receipt.Parts ListMake sure you have all the parts listed below before using your stroller. If any parts are missing,call Consumer Affairs at 1-800-992-6624.Warranty CardStroller PackInstructionManualMain BodyName of PartsFront Wheels(x2)Rear Wheels(x2)1 Handle Grip2 Stroller Pack3 Folding Lever4 Carrying Strap11 End Cap5 L-Shaped Brackets for Infant Carrier6 Infant Seat Attachment Rail12 Plastic Rail Cover7 Infant Seat Attachment Strap8 Locking Lever9 Basket10 Swivel Lock LeverCombi USA, Inc. 1962 HWY 160 W, Suite 100 Fort Mill, SCConsumer Affairs 1-800-99-COMBI29708 www.combi-intl.com

WARNINGS For your child’s safety:If your stroller is not used in compliance with these instructions, serious injury may result.In the event of damage orproblems, discontinue use andcontact Combi Consumer Affairsfor instructions: 1-800-992-6624.WARNINGAVOID SERIOUS INJURY FROMFALLING OR SLIDING OUT. ALWAYSUSE ATTACHMENT STRAP. INFANTSEAT HARNESS MUST BE USEDWHEN USING THIS PRODUCT.WARNINGNEVER LEAVE CHILDUNATTENDED.WARNINGDO NOT ALLOW CHILD TO LEANOVER SIDES OF STROLLER. ITMAY BECOME UNBALANCEDAND TIP OVER.WARNINGExcessive weight in basket (oritems placed in basket whichoverflow the top or side ofbasket) may cause a hazardouscondition to exist.WARNINGWARNINGDO NOT LIFT AND CARRYthe stroller while open with achild in it. The stroller may slip.Do not use the stroller onsteep slopes, stairs, escalators, beaches, rough roads,mud, etc.WARNINGWARNINGNever carry more than one childin the stroller. Do not allow achild to ride or sit on areas ofstroller other than the seat.Do not load more than 10lbs. (4.5kg) in the basket.WARNINGTO AVOID BURNS, do not placebottles/cups with hot liquids inthe Stroller Pack. Do not placemore than 2 lbs. in the StrollerPack.WARNINGDo not allow your child to standin or on the stroller.WARNINGDo not put or hang things on thehandle because it could cause thestroller to become unbalanced ortip over.WARNINGAlways engage both brakeswhen parking the stroller.Please refer to manufacturer's infant carrier instruction manualfor minimum and maximum weight accommodation. Only transport infants that are within size and weight limitations of infantcar seat as described in the manufacturer’s instruction manual.Note: Illustrations are forreference only and may notrepresent the actual product.CAUTIONS:1. Improper usage or lackof knowledge regarding theinstructions can result indangerous situations,personal injury or damage tothe stroller.2. Completely remove allplastic bags and packingmaterials before usingthis product to prevent apossible choking hazard.3. Push the stroller at anormal walking speed only.All products specifications are subject to change without notice. Sizes andweights are intended as guides and are approximations. Combi reserves theright to modify the products in its line during the course of the year. Non contractual media. Colors are as accurate as the media in which they appear allows. Combi USA, Inc. 2004-2-

Assembling the Stroller1. Remove stroller and wheel assemblies from the plastic bag.2. Remove and discard both black rubber caps from strollerframe.3. Release locking latch by pulling latch away from stroller frame.4. Grip the handle on each side with an under hand hold andturn outward to open.5. Lift up the handleand snap the strolleraway from you. Itwill open and lockautomaticallyinto position.Note: Illustrationsare for reference onlyand may not representthe actual product.Attaching & Removing the Front Swivel Wheels1. Turn stroller over and removepackaging material from strollerframe.Removing the Swivel WheelsPress in the rectangular button located atthe bottom of the wheel holder while pulling the assembly off of the swivel shaft.2. Insert the front wheels ontothe stroller leg. Make sure theswivel wheel lever is behind thestroller leg and released. Youwill hear a click when the wheelis properly attached.Release ButtonAttaching and Removing the Rear Wheels1. Locate the small opening on each rearwheel assembly.To remove the wheels, push in small chromepin and pull wheels off the frame.-3-2. Locate the small chrome pin on each rear stroller leg.3. Insert the leg into thewheel assembly until thesmall chrome pin locksinto the opening.

Using the Swivel WheelsTo lock swivels, lift both swivel lock levers up.To unlock swivels, push both swivel lock levers down.CAUTIONUsing the BrakesPush the stroller forward to ensure thatthe brakes are properly engaged.To lock brakes, push both brake levers down.To unlock brakes, lift both brake levers up.CompatibilityFlash EX Compatible Infant Car SeatsCombi Tyro, Combi ConnectionGraco Snug Ride , Snug Ride DX5 , Snug Ride LX5 Century Smart Fit Supreme , Assura, Smart Fit Plus 22, Smart Fit Plus 22V, Smart FitElite, Avanta SE, Avanta DX.Evenflo Portabout, DiscoveryCosco Eddie BauerPeg-Perego - Primo ViaggioTrade name and trademarks of Graco , Century , Evenflo , Cosco and Peg-Perego are theproperty of their respective owners and no endorsement of or approval by them is intended orimplied. The Combi Flash EX stroller is compatible with specified models of the Graco , Century ,and Evenflo , Cosco and Peg-Perego infant car seat/carrier models as of the date this printingwas prepared. Copyright May 2005 Combi USA, Inc.WARNINGSWhen infant car seat/carrier isin the stroller, always fasten theinfant seat harness as well as thecarrier attachment straps.If unable to securely attach infantcar seat/carrier to the Combi FlashEX, discontinue use and contactCombi Consumer Affairs.The Combi Flash EX is only to beused when attaching infant carseat/carriers. Do not use for anyother purpose.Do not lift stroller by using infantcar seat/carrier handle.To assure safety for the baby,please refer to the manufacturer’sinstructions for use of your infantcar seat/carrier.Discontinue use if fraying ordamage is noted to carrier attachment strap.Trade name and trademarks of Graco , Century , Evenflo and Cosco and Peg-Perego are the property of their respective owners and no endorsement of or approval by them is intended or implied. All Combi Flash EX strollers are compatible with specified models of the Graco , Century ,Evenflo , and the Peg-Perego infant car seat/carrier models as of the date this printing was prepared.Copyright May 2005 CombiCUSA Inc.-4-

Attaching/Releasing Infant SeatCombi Tyro, Combi Connection, Graco Snugride, Evenflo.Portabout, Peg-PeregoNote: Illustrations are for reference only and may not representthe actual product.11. Unbuckle the attachment strap and lay over the rightand left side of the stroller frame.2. Hook the infant seat onto front rail of the stroller. Thefoot end of infant car seat/carrier will rest on the twoL-shaped brackets.3. Bring the infant seat attachment straps through theseat belt guides in the infant car seat/carrier and fasten the buckle. To loosen, tilt the buckle and pull up.To tighen, pull the strap.23WARNINGNever use this product without securing the attachmentstrap to the infant seat.WARNINGThe infant harness must be buckled correctly per yourmanufacturer's instructions.WARNINGMake sure you tighten the attachment strap before usage.REMOVING THE INFANT SEAT/CARRIERRemove the infant car seat/carrier by reversing theabove steps. See your infant car seat manufacturer'sinstructions for proper release lever operation.Trade name and trademarks of Graco , Century , Evenflo and Cosco and Peg-Perego are the property of their respective owners and no endorsement of or approval by them is intended or implied. All Combi Flash EX strollers are compatible with specified models of the Graco , Century ,Evenflo , and the Peg-Perego infant car seat/carrier models as of the date this printing was prepared.Copyright May 2005 Combi USA Inc.-5-

Attaching/Releasing Infant SeatCosco, Eddie Bauer,Evenflo, Discovery, Peg-PeregoNote: Illustrations are forreference only and may notrepresent the actual product.1. Use object to press in plastic tabs to release right and left end caps.(See diagram A) The plastic tabs are located underneath the front railof the stroller on the plastic right and left rail covers. (See diagram 1)Right and left end caps will be released by pressing in plastic tabs.(See diagram B) End caps must be removed to install Cosco EddieBauer, Evenflo, Discovery or Peg-Perego infant carrier.2212. Unbuckle theattachmentstrap and layover the rightand left sideof the strollerframe.3. Hook the infantseat onto frontrail of the stroller.The foot end ofinfant car seat/carrier will rest onthe two L-shapedbrackets.ABRemove End Cap3. Bring the infant seat attachment straps through theseat belt guides in the infant car seat/carrier and fasten the buckle. To loosen, tilt the buckle and pull up.To tighen, pull the strap.3WARNINGNever use this product without securing the attachmentstrap to the infant seat.WARNINGThe infant harness must be buckled correctly per yourmanufacturer's instructions.WARNINGMake sure you tighten the attachment strap beforeusage.REMOVING THE INFANT SEAT/CARRIERRemove the infant car seat/carrier by reversing theabove steps. See your infant car seat manufacturer'sinstructions for proper release lever operation.Trade name and trademarks of Graco , Century , Evenflo and Cosco and Peg-Perego are the property of their respective owners and no endorsement of or approval by them is intended or implied. All Combi Flash EX strollers are compatible with specified models of the Graco , Century ,Evenflo , and the Peg-Perego infant car seat/carrier models as of the date this printing was prepared.Copyright May 2005 CombiCUSA Inc.-6-

Note: Illustrations are forreference only and may notrepresent the actual product.Folding the StrollerCAUTION1. Remove infant seat.2. Lock both front swivel wheels.For safety purposes, the folding levers should beoperated only when folding the stroller.3. Empty the basket.4. Lift the folding levers on both sides of thehandle.5. Tilt handle back and fold.6. Fold handle inward and lock with the folding latch.4Attaching the Basket5CAUTIONDo not place more than 10 lbs. in the basket.Remove all items from the basket before folding thestroller.1. Loop the front, rear and middle straps of the basket around the stroller frame and snap together.Removing the Basket1. Press the gray plastic tabs together to detach basket. Gray tabs are located at the top corner of thebasket in the front, middle and rear.-7-6