S.G VT5800 6800 7800 CH1

2y ago
26 Views
2 Downloads
1.11 MB
27 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Joao Adcock
Transcription

Chapter 1System SpecificationsOverviewVTX800 series are business-ready desktop PCs built with latest, high-performance technology formanaging demanding workloads. It is standalone or network-ready for SMB and includes video and audiofeatures for business multimedia.In “stable technology”, we choose Intel Pentium4 processor, Intel 945G ICH7 chipset architecture. Thecombination can run at 1066/800 MHz front side bus, which gives more performance than other processors.We also provide 1 PCI-Express x16 slot for add-on graphic solution, 1 PCI-Express x1 slot and 2 PCI slots, 4Dual channel DDR2 memory slots, one parallel ATA port, four serial ATA2 prots, and onboard Gigabit LAN,onboard Audio function.There are three knids of chassis for Veriton series: Veriton 7800 for Mini-tower, Veriton 5800 for Desktopand Veriton 6800 for Micro-tower which can fulfill all segment customers: expandability, middle-to-heavyperformance, and space saving.Chapter 11

FeaturesCPUTSocket Type : Intel Socket TTSupports Intel Pentium 4 Prescott 775 / Smithfield FSB 800/1066MHzTSupports Intel Celeron Prescott 775 / FSB 533MHzTPentium 4 2.66GHz 3.8GHz speedTCeleron D2.53GHz 3.2GHzTL2 Cache varies with CPUChipsetTNorthbridge: Intel Lakeport-GTSouthbridge: Intel ICH7MemoryTSocket Type : DDR II,1.8 VoltageTSocket Quantity : 4, support Dual ChannelTCapacity support : 256MB 4GBTSupport Memory Speed : 400/533/667 MHzGraphic SolutionTIntel Lakeport-G on-die graphic solutionTPCI-E x16 VGA Add-On CardSlotsT1 PCI Express x16 slotT1 PCI Express x1 slotT2 PCI 2.2 5V slotsTOne 1.44MB 3.5” deviceFDDPATA IDETSlot Type : 40pin PATA IDE slotTSlot Quantity : 2TTransfer rate support PIO mode 0 (3.33MB/s) /1 (5.22MB/s) /2 (8.33MB/s) /3 (11.1MB/s) /4 (16.7MB/s)TATA mode : 33/66/100/133TDevice Type Support : HDD/CD-ROM/DVD-ROM/Combo/DVD burnerSATA IDE2TSlot Type: SATA IDE slotTSlot Quantity : 4TStorage Type Support : HDD/CD-ROM/CD-RW/DVD-ROM/DVD-RW/DVD RW/DVD Dual/DVDSupermultiplusChapter 1

AudioTCodec : Realtek ALC880 (HD Codec)TOne UAJ (Universal Audio Jack) support (rear only)Remark UAJ : UAJ not only provides the ideal solution for multi-media and also user-friendliness for audiospeaker installation.T7.1 Channel Audio SupportTReserved disable function on BIOS side. Default is enabled.TController : PCI-E Giga LAN chip with manageability functionTLAN Chip : Marvell 88E8052TShould be worked under 10/100/1000 Mbs environmentTReserved disabled function on both hardware & BIOS side. Default is enabledTController : Intel ICH7TConnectors Quantity : 8TFour for front daughter board (Pin:2*5 )TUSB 2.0/1.1LANUSBSystem LED DefinitionChasisH701BezelV751H500H401Power LEDHDD LEDLAN LEDS0S1,S3S4,S5BlueBlue BlinkingOFFBlueBlueODD LEDBlueH500GreenGreen BlinkingOFFGreenGreenN/AV451BlueBlue BlinkingOFFBlueBlueBlueA451BlueBlue BlinkingOFFBlueBlueBlueOn-Board ConnectorTTChapter 1Rear I/O ConnectorsT1 PS/2 Keyboard Port, 1 PS/2 Mouse PortT1 Parallel Port, 1 Serial PortT1 VGA PortT1 RJ45 GigaLAN PortT4 USB PortsT6 Ports Jack Support HD (High Definition) Audio Output(5.1 channel)On-Board ConnectosT1 CPU SocketT4 Memory SocketT1 PCI Express x1 SlotT1 PCI Express x16 SlotT2 PCI SlotsT1 FDD Slot3

4T1 PATA IDE SlotsT4 SATA2 IDE SlotsT2 2*5 pin Intel FPIO sepecification USB pin connectorsT1 2*5 pin Intel FPIO spec. Microphone In/Headphone Out pin connectorsT1 2nd serial portT1 CD-In 4pin connector (CD-ROM Audio Input)T1 4 pin CPU Fan connector with linear circuitT1 3 pin System FAN connectors with linear circuitT1 Intrusion ALarm connectorT1 24pin/4pin ATX interface PS3/PS2 SPS connectorT1 2*5pin Intel FPIO specification Power Switch/Power State LED/HDD active LEDT1 2 pin LAN activity monitor connectorT1 reserved GPIO connector for “One Button Recovery” functionT1 Buzzer on boardTColor management for on board connectorChapter 1

Block eCPUCLK /-(200/133MHz)DDRII 667/533/400MHz DIMMPCI Express x16Intel945GMCHDual Channel MemoryMCHCLK (133/200MHz)66MHz33MHz14.318MHz48MHz1 PCI Express x 1 PortPCI-ECLK(100MHz)BIOSPCI Express x1 BusPCI Bsu4 Serial ATAATA33/66/100IDE ChannelsIntel ICH7Floppy88E8052LPT PortSMCLPC47M182COM Ports2 PCIPCICLK(33MHz)Chapter 1CODECCenter/Subwoofer Speaker OutSurround Speaker OutSide Speaker OutMICLine-OutLine-InSPDIF InSPDIF OutRJ4524MHz8 USBPorts33MHzPS/2 KB/Mouse5

MainBoard PlacementLPC47M182KB MSATX 12VLANUSBUSBLGA775ATX8I945AEVGAIRLPTCOMACPU FANIntel 945GAUDIO1PCIE 12VIDEDDRII4ICH7-AEBATCD INRESV2PCIE 1RESV1SPDIF COMBCODECRECOVERYCISYS FANF USB1TPMF USB2F PANELS ATA1 S ATA3BIOSS ATA0 S ATA2PCI2DDRII3PCI1DDRII2DDRII1PCIE 1688E8052FDDAUDIO2CLR CMOSF-AUDIOLOCKERLOCK RST6Chapter 1

Rear I/O PortItemNameaPS/2 Keyboard and PS/2 MouseConnectorTo install a PS/2 port keyboard and mouse, plug the mouse to theupper port (green) and the keyboard to the ower port (purple).DescriptionbLPT Port (Parallel Port)The parallel port allows connection of a printer, scanner and otherperipheral devices.cCOM (Serial Port)Connects to serial-based mouse or data processing devices.dVGA PortMonitor can be connected to VGA port.fUSB PortsBefore you connect your device(s) into USB connector(s), pleasemake sure your device(s) such as USB keyboard, mouse, scanner,zip, speaker.etc. have a standard USB interface. Also make sureyour OS supports USB controller. If your OS does not support USBcontroller, please contact OS vendor for possible patch or driverupgrade. For more information please contact your OS or device(s)vendors.gLAN PortThe provided Internet connection is Gigabit Ethernet, providing datatransfer speeds of 10/100/1000Mbps.hLine InDevices like CD-ROM, walkman etc. can be connected to Line Injack.iLine OutConnect the stereo speakers or earphone to this connector.jMIC InMicrophone can be connected to MIC In jack.kRear Speaker OutCOnnect the rear surround speakers to this connectorlCenter/Subwoofer Speaker OutConnect the Center/Subwoofer speakers to this connectormSide Speaker OutConnect the side surround speakers to this connectorChapter 17

Veriton 5800 Front PanelNo.8DescriptionNo.2Description1Optical DeviceFloppy drive3Microphone-in jack4Speaker-out/line-out port5USB ports6One Button Recovery hole7Indicators8Power buttonChapter 1

Veriton 6800 Front PanelNo.1DescriptionOptical DeviceNo.2DescriptionFloppy drive3Microphone-in jack4Speaker-out/line-out port5USB ports6Indicators7Power buttonNOTE: The specifications above are for reference only. The exact configuration of your PC depends on themodel purchased.Chapter 19

Veriton 7800 Front PanelNo.10DescriptionNo.Description1Optical Device2Floppy drive3Microphone-in jack4Speaker-out/line-out port5USB ports6Indicators7Power buttonChapter 1

Veriton 5800 Rear PanelNo.Chapter 1DescriptionNo.2Description1Power supplyPower cord socket3Voltage selector switch4PS/2 mouse port5PS/2 Keyboard port6Serial port7Printer connector8Monitor connector9USB 2.0 ports10RJ-45 Ethernet connector11Audio jack12Expansion slots13Chassis lock pad11

Veriton 6800 Rear PanelNo.12DescriptionNo.Description1Power supply2Power cord socket3Voltage selector switch4PS/2 mouse port5PS/2 Keyboard port6Serial port7Printer connector8Monitor connector9USB 2.0 ports10RJ-45 Ethernet connector11Audio jack12Expansion slots13Chassis lock padChapter 1

Veriton 7800 Rear PanelNo.DescriptionNo.2Description1Power supplyPower cord socket3Voltage selector switch4PS/2 mouse port5PS/2 Keyboard port6Serial port7Printer connector8Monitor connector9USB 2.0 ports10RJ-45 Ethernet connector11Audio jack12Expansion slots13Chassis lock padAudio Jack Function TableColor/UseHeadphone1.1 CH3.1 CH5.1 CH7.1 RearRearGraySideSideSideSideSideChapter 113

System PeripheralsThe Aspire T630 and AcerPower F3 computer consist of the system itself, and system peripherals, like amouse, keyboard and a set of speakers (optional). This section provides a brief description of the basicsystem peripherals.Mouse (PS/2 or USB, manufacturing option)The included mouse is a standard two-button wheel mouse. Connect the mouse to the PS/2 mouse port orUSB port on the back panel of the system.Keyboard (PS/2 or USB, manufacturing option)Connect the keyboard to the PS/2 keyboard port or USB port on the back panel of the system.14Chapter 1

SpeakersNote:For systems bundled with speakers, before powering on the system, connect the speaker cable to the audioout (external speaker) port on the back panel of the system.For more detailed information about the speakers, please refer to the included operating instructions.NOTE: speakers are optional and the appearance might be different depending on the actual product.Chapter 115

Acer eRecoveryAcer eRecovery is a tool to quickly backup and restore the system. Users can create and save abackup of the current system configuration to hard drive, CD, or DVD.Acer eRecovery consists of the following functions:1.Create backup2.Restore from backup3.Create factory default image CD4.Re-install bundled software without CD5.Change Acer eRecovery passwordCreate backupUsers can create and save backup images to hard drive, CD, or DVD.1.Boot to Windows XP2.Press Alt F10 to open the Acer eRecovery utility.3.Enter the password to proceed. The default password is six zeros.4.In the Acer eRecovery window, select Recovery settings and click Next5.In the Recovery settings window, select Backup snapshot image and click Next.6.Select the backup method.TUse Backup to HDD to store the backup disc image on drive D:.TBackup to optical device to store the backup disc image on CD or DVD (only available onsystems that include an optical disc burner).7.After choosing the backup method, click Next.Follow the instruction on screen to complete the process.Restore from backupUsers can restore backup previously created (as stated in the Create backup section) from hard drive,CD, or DVD.1.Boot to Windows XP.2.Press Alt F10 to open the Acer eRecovery utility.3.Enter the password to proceed. The default password is six zeros.4.In the Acer eRecovery window, select Recovery actions and click Next.5.Select the desired restore action and follow the onscreen instructions to complete the restore process.Create factory default image CDWhen the System CD and Recovery CD are not available, you can create them by using this feature.161.Boot to Windows XP.2.Press Alt F10 to open the Acer eRecovery utility.3.Enter the password to proceed. The default password is six zeros.4.In the Acer eRecovery window, select Recovery settings and click Next.5.In the Recovery settings window, select Burn image to disc and click Next.6.In the Burn image to disc window, select 01. Factory default image and click Next.Chapter 1

7.Follow the instructions on screen to complete the process.Re-install bundled software without CDAcer eRecovery stores pre-loaded software internally for easy driver and application re-installation.1.Boot to Windows XP.2.Press Alt F10 to open the Acer eRecovery utility.3.Enter the password to proceed. The default password is six zeros.4.In the Acer eRecovery window, select Recovery actions and click Next.5.In the Recovery settings window, select Reinstall applications/drivers and click Next.6.Select the desired driver/application and follow the instructions on screen to re-install.At first launch, Acer eRecovery prepares all the needed software and may take few seconds to bring up thesoftware content window.Change PasswordAcer eRecovery and Acer disc-to-disc recovery are protected by a password that can be changed bythe user. Follow the steps below to change the password in Acer eRecovery.1.Boot to Windows XP.2.Press Alt F10 to open the Acer eRecovery utility.3.Enter the password to proceed. The default password is six zeros.4.In the Acer eRecovery window, select Recovery settings and click Next.5.In the Recovery settings window, select Password: Change Acer eRecovery password and click Next.6.Follow the instructions on screen to complete the process.Chapter 117

Acer disc-to-disc recoveryRestore without a Recovery CDThis recovery process helps you restore the C: drive with the original software content that is installed whenyou purchase your notebook. Follow the steps below to rebuild your C: drive. (Your C: drive will bereformatted and all data will be erased.) It is important to back up all data files before you use this option.1.Restart the system.2.While the Acer logo is showing, press Alt F10 at the same time to enter the recovery process.3.The message "The system has password protection. Please enter 000000:" is displayed.4.Enter six zeros and continue.5.The Acer Recovery main page appears.6.Use the arrow keys to scroll through the items (operating system versions) and press Enter to select.Multilingual operating system installationFollow the instructions to choose the operating system and language you prefer when you first power-on thesystem.181.Turn on the system.2.Acer's multilingual operating system selection menu will pop-up automatically.3.Use the arrow keys to scroll to the language version you want. Press Enter to confirm your selection.4.The operating system and language you choose now will be the only option for future recoveryoperations.5.The system will install the operating system and language you choose.Chapter 1

Hardware Specifications and ConfigurationsSystem Board Major ChipItemSpecificationSystem Core LogicIntel 945G Express chipsetIntel ICH7Super I/O ControllerLPC47M182LAN ControllerIntel ICH7Memory ControllerBuild in Intel 945GE-IDE ControllerBuild in Intel ICH7RJ45 Controller88E8052Audio ControllerIntel ICH7VGA ControllerIntel 945GKeyboard ntel Pentium 4 processor 775 Land Grid Array(LGA)SlotSocket-T (LGA 775)SpeedDepends on CPU, which is local configuredBus Frequency533/800/1066 MHzVoltageProcessor voltage can be detected by any system withoutsetting any jumperBIOSItemSpecificationBIOS code programmerAwardBIOS versionR01-A1BIOS ROM size4MBBIOS ROM package32-pin PLCC packageSupport protocolPCIX 1.0,PCI 2.2,APM 1.2,VESA/DPMS (VBE/PM V1.1),SMBIOS 2.3, E-IDE 1.1, ACPI 1.0b,ESCD1.03, PnP 1.0a,Bootable CD-ROM 1.0, USB 1.1 USB 2.0, UHCI 1.0, ANSIATA 3.0 ATAPIBoot from CD-ROM featureYesSupport to LS-120 driveYesSupport to BIOS boot block featureYesBIOS Password ControlYesThe BIOS can be overwritten/upgraded by using “AFLASH” utility (AFLASH.EXE).Chapter 119

BIOS Hotkey ListHotkeyFunctionDescriptionEnter BIOS Setup UtilitycPress while the system is booting toenter BIOS Setup Utility.System MemoryItemSpecificationMemory Slot Number4 SlotsSupported Memory Size per Slot256 MB 1GBSupported Maximum Memory Size4GBSupported Memory Speed533/667 MHzSupported memory voltage1.8 VSupport memory module package240-pin DIMMSupport to parity check featureYesSupport to Error Correction Code (ECC)featureYesMemory module combinationsYou can install memory modules in any combination aslong as they match the above specifications.VRM (Voltage Regulator Module)FunctionVRM SpecificationTypical VoltagePower SourceMaximum OutputCPU VRMVRM10.10.8375 1.6v12 Voltage101ACPU VRMVRM 9.01.1-1.85 Voltage12 Voltage70ACache MemoryItemSpecificationFirst-Level Cache ConfigurationsCache function controlEnable/Disable by BIOS SetupSecond-Level Cache ConfigurationsThe information below is only applicable to system installed with a Pentium 4 processor20Tag RAM LocationOn ProcessorL2 Cache RAM LocationOn ProcessorL2 Cache RAM typePBSRAM (Pipelined-burst Synchronous RAM)L2 Cache RAM sizeDepends on CPU, which is local configuredL2 Cache RAM speedFull of the processor core clock frequency (Advanced Transfer Cache)L2 Cache function controlEnable/Disable by BIOS SetupL2 Cache schemeFixed in write-backChapter 1

LAN InterfaceItemSpecificationLAN Controller88E8052 LAN ControllersLAN Controller Resident BusPCI BusLAN PortONE RJ-45 on boardFunction ControlEnable/Disable by BIOS SetupIDE InterfaceItemSpecificationIDE ControllerBuilt-in Intel ICH7IDE Controller Resident BusPCI busNumber 40 pin PATA slot1TDevice Type SupportHDD, CD-ROM, CD-RW, DVD-ROM,Combo,DVD burnerTTransfer Rate SupportPIO 0/1/2/3/4TATA Mode33/66/100Number STAT IDE slotTDevice Type Support4HDD,CD-ROM,CD-RW,DVD-ROM,DVD-RW,DVD RW,DVD Dual,DVDSupermultiplusSupports LS-120YesSupports bootable CD-ROMYesFunction ControlEnable/Disable by BIOS setupDiskette Drive InterfaceItemSpecificationDiskette Drive ControllerLPC47M182Diskette Drive Controller Resident BusLPC BusSupported Diskette Drive Formats1.44MB, 2.88MB format and slim type diskette driveFunction ControlEnable/Disable by BIOS SetupSerial PortItemSpecificationSerial port controllerLPC47M182Serial port controller resident busLPC BusNumber of serial port1Serial port locationRear panel16550 UART supportYesConnector type9-pin D-type female connectorChapter 121

USB PortItemSpecificationUniversal HCIUSB 2.0/1.1ControllerIntel ICH7Number of the connectors8LocationRear : 4On-board header : 4USB ClassSupport legacy keyboard for legacy modeWake-up Event SpecificationsDeviceS1S3S4S5Power ButtonEnabledEnabledEnabledEnabledPS2 KeyboardDisabledDisabledDisabledDisabledUSB isabledDisabledWOR (wake on Ring)DisabledDisabledDisabledDisabledRTC (real time clock)DisabledDisabledDisabledDisabledThermal DesignItemDescriptionThermal DesignTProvision for optional secondary fanTAdequate venting in the front of chassisTAdequate venting in the rear of chassisMemory Address MapAddress22SizeFunction0000000 - 009FFFF640 KB System MemoryOnboard DRAM00A0000-00BFFFF128 KB Video RAMReserved for Graphics DisplayBufferNon-Cacheable00C0000-00CFFFF32 KB I/O Expansion ROMReserved for ROM on I/OAdapters00D0000-00D3FFF16 KB I/O Expansion ROMReserved for ROM on I/OAdapters00D4000-00D7FFF16 KB I/O Expansion ROMReserved for ROM on I/OAdapters00D8000-00DBFFF16 KB I/O Expansion ROMReserved for ROM on I/OAdapters00DC000-00DFFFF16 KB I/O Expansion ROMReserved for ROM on I/OAdapters00E0000-00E7FFF32 KB for SCSI BIOSReserved for SCSI BIOS00E8000-00EFFFF32 KBReserved OnboardChapter 1

Memory Address MapAddressSizeFunction00F0000-00FFFFF64 KB BIOSSystem ROM BIOS (ROM)System RAM BIOS (DRAM)0100000-0F9FFFFSystem MemoryOnboard DRAM0FA0000-0FFFFFF384 KB I/O Card MemoryReserved for Memory MapI/O CardNon-Cacheable1000000-FFFFFFFSystem MemoryOnboard DRAMPCI INTx# and IDSEL Assignment MapPCI INTx #PCI DevicesDevice IDSEL: t2AD17I/O Address MapHex 77AChapter 1DevicesDMA Controller-1Interrupt Controller-1System TimerKeyboard Controller 8742System SpeakerCMOS RAM Address and Real Time ClockDMA Page RegisterInterrupt Controller-2DMA Controller-2Math Co-ProcessorSecondary IDEPrimary IDEParallel Printer Port 2Serial Asynchronous Port 2Parallel Printer Port 1Floppy Disk ControllerSecondary IDEPrimary IDESerial Asynchronous Port 1Configuration Address RegisterConfiguration Data RegisterParallel Printer Port 123

IRQ Assignment MapIRQxSystem DevicesAdd-On-Card ial Port 2ReservedIRQ4Serial Port 1ReservedIRQ5ReservedReservedIRQ6Floppy DiskReservedIRQ7Parallel PortReservedIRQ8Real Time 12PS/2 MouseReservedIRQ13Numeric ProcessorNIRQ14Embedded Hard DiskReservedIRQ15ReservedReservedNOTE: N - Not be usedDRQ Assignment MapDRQxSystem DevicesAdd-On-Card ervedNOTE: N - Not be usedEnvironmental RequirementsItemSpecificationsTemperatureOperating 5 C 35 CNon-oper

The Aspire T630 and AcerPower F3 computer consist of the system itself, and system peripherals, like a mouse, keyboard and a set of speakers (optional). This section provides a brief description of the basic system peripherals. Mouse (PS/2 or USB, manufacturing option) The included mouse is a standard two-button wheel mouse.

Related Documents:

ws-x6148a-ge-tx*21 ws-x6848-tx-2t ws-x6848-tx-2txl ws-x6548-ge-tx*20 ws-x6516a-g i *20 ws-x6824-sfp-2t ws-x6824-sfp-2txl ws-x6724-sfp*19 ws-x6748-ge-tx*22 6800-48p-tx 6800-48p-tx-xl ws-x6748-sfp*22 ws-x6848-sfp-2t 6800-48p-sfp ws-x6848-sfp-2txl 6800-48p-sfp ws-x6716-10t-3*19 – – ws-x6716-10t-3 xl*19 – – ws-x6716-10g-3*19 ws-x6816-10g-2t .

TYT-TH-7800 Notice utilisateur TH7800 – Traduit de l'anglais par Jean-Paul BEC – F8BMB Page 2 TH-7800 Manuel de l'utilisateur Merci beaucoup d'avoir choisi l'émetteur-récepteur mobile double bande TH-7800. Le TH-7800 vous of

FSS-6800 and FDS-6800 Series · User Manual Ross Part Number: 6802DR-004-03 Release Date: January 30, 2018. The information contained in this Guide is subject to

The Operator's Workstation (6800-PCCOWU-LT) is the primary control and data recording point for the Series 6800 DAS. The PCCOWU-LT is typically a laptop, connected to the USB port and runs PI660 Data Acquisition Software for system setup, calibration, display, recording, distribution and export. SERIES 6800 Portable Data Acquisition Systems

The Cisco IP Phone 7800 Series to-use,highly-securevoicecommunications. Table 1: Cisco IP Phone 7800 Series Major Features Features 7811 7821 7841 7861 Greyscale,with backlight Greyscale,with backlight Greyscale,with backlight Greyscale,no backlight Screen Lines 1 2 4 16 Cisco IP Phone 7800 .

selectivity of IC-7800 is far better than that of the IC-781, and its IF-DSP filters are much tighter than the analogue filters in the IC-781. If DSP NR is ON and a tighter roofing filter (e.g. 3 kHz) is used, the IC-7800 is an even better performer. If you need to hunt weak DX signals among “big guns”, IC-7800

Atari 7800 A/V Mod Installation Guide This document will guide you through installing your Atari 7800 A/V Mod Kit to your Atari 7800 NTSC and PAL game consoles. Step-by-step guide will show you the detailed in

Thus it might seem that Scrum, the Agile process often used for software development, would not be appropriate for hardware development. However, most of the obvious differences between hardware and software development have to do with the nature and sequencing of deliverables, rather than unique attributes of the work that constrain the process. The research conducted for this paper indicates .