Submittal, Model Series FLH Types AA And AAC, FlowLine .

2y ago
43 Views
2 Downloads
8.58 MB
61 Pages
Last View : 5d ago
Last Download : 4m ago
Upload by : Maxine Vice
Transcription

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMHORIZONTAL HIGH THROW PATTERN CONTROLLERSMODEL SERIES: FLH TYPES AA & AACOne SlotEnd ConditionTwo Slot Type AA Exposed Flange Frame Type AA Exposed Flange Frame Drywall (ceiling, wall), T-barM Drywall (ceiling, wall), T-barW 1/4" (6)WMitered End BorderDEW 1/4" (6)WHH13/32"(10)L13/32"(10)SOWAASATDimensional Data - Imperial (Metric) Units1 SlotModelSSlot WidthWFLH10FLH15FLH20FLH25FLH301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)2 SlotOWW Drywall (ceiling)OW3 9/16 (90) 4 15/16 (125) 6 (152)4 9/16 (116) 6 15/16 (176) 8 (203)5 9/16 (141) 8 15/16 (227) 10 (254)6 9/16 (167) 10 15/16 (278) 12 (305)7 9/16 (192) 12 15/16 (329) 14 (356) Type AAC Exposed Flange FrameSAOWFABorder WidthHHeightT2 Slot1 9/32 (33)1 17/32 (39)1 25/32 (45)2 1/32 (52)2 9/32 (58)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)Flanged End CapType AA Border OnlyDE Type AAC Exposed Flange Frame Drywall (ceiling)DLD)(251"HHASAOW D 1/16" (2)ASDimensional Data - Imperial (Metric) UnitsModelSSlot WidthFLH10FLH15FLH20FLH25FLH301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)D Duct Width1 Slot2 Slot3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7 1/2 (191)6 (152)8 (203)10 (254)12 (305)14 (356)T2 Slot3 (76)4 (102)5 (127)6 (152)7 (178)1 9/32 (33)1 17/32 (39)1 25/32 (45)2 1/32 (52)2 9/32 (58)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)5 1/2 (140)7 1/2 (191)9 1/2 (241)11 1/2 (292)13 1/2 (343)ENGINEERCONTRACTOROpen EndDEAHHeightSpecial Finish .SCHEDULE TYPEPROJECTSABorder WidthNotes:Option:TOW DCeiling Opening Width1 Slot2 Slot1. Material: Heavy duty extruded aluminum frame and spacers. Corrosionresistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengths are furnished inmultiple sections with alignment strips, the number and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. AW Appliance White finish with black pattern controllers and interior surfaces isstandard on frame/borders AA and AAC. Optional finishes are available.5. Frame/Border Type AA is supplied w/integral hanger brackets on 24" (610)centers. Frame/Border Type AAC is supplied with concealed mounting bracketsand levelling screws on 24" (610) centers. See separate submittal for optionalmounting hardware and accessories. SPO13/32"(10)13/32"(10)LOverall Length & End Cap PositionEL MM D - 1/4 (6) MO D - 1/8 (3) MC D - 1/16 (2) OOD OC D - 1/16 (2) CC D - 1/8 (3) FF D - 1/4 (6) FO D - 1/8 (3) FC D - 1/16 (2)CFlat End CapDED 9/16 (14)D 9/32 (7)D 11/32 (9)DD - 1/16 (2)D - 1/8 (3)D 1 5/8 (41)D 13/16 (21)D 7/8 (22)LDimensions are in inches (mm).DATEB SERIES4 - 12 - 16FLSUPERSEDES DRAWING NO.Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.2 - 16 - 10FLH-1

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMHORIZONTAL HIGH THROW PATTERN CONTROLLERSMODEL SERIES: FLH TYPES CC, CCA, CCC & CCCACONCEALED SURFACE MOUNT APPLICATION DRYWALL (CEILING/WALL) TAPE & SPACKLEOne Slot Type CC Concealed TaperedFrameTwo SlotEnd ConditionM Mitered End Border Type CC Concealed Tapered FrameDEW 1/4" (6)WW 1/4" (6)WHH13/16"(21)13/16"(21)CSOWLSCCSTCOW Type CCA Concealed TaperedFrame with CountersunkScrew Holes Type CCA Concealed Tapered Side Framewith Countersunk Screw Holes13/16"(21)O Open EndW 1/4" (6)WW 1/4" (6)WDE13/16"(21)HHLCSOWSCCTSCOWDimensional Data - Imperial (Metric) Units1 SlotSSlot WidthModelFLH101 (25)FLH15 1 1/2 (38)FLH202 (51)FLH25 2 1/2 (64)FLH303 (76)Notes:2 SlotWOWW2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)4 3/8 (111)5 3/8 (137)6 3/8 (162)7 3/8 (187)8 3/8 (213)4 15/16 (125)6 15/16 (176)8 15/16 (227)10 15/16 (278)12 15/16 (329)OWCBorder Width6 13/16 (173) 1 11/16 (43)8 13/16 (224) 1 15/16 (49)10 13/16 (275) 2 3/16 (56)12 13/16 (325) 2 7/16 (62)14 13/16 (376) 2 11/16 (68)1. Material: Heavy duty extruded aluminum frame and spacers.Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengthsare furnished in multiple sections with alignment strips, thenumber and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. MI Mill finish is standard on frame/border CC with anAW Appliance White center tee on the 2 slot model. Patterncontrollers and interior surfaces are black.5. Type CC and CCA have integral hanger brackets on 24" (610)centers. See separate submittal for Type CC optional mountinghardware and accessories.HHeightC Flat End CapT2 SlotDE2 3/8 (60) 1 7/16 (37)2 5/8 (67) 1 15/16 (49)2 7/8 (73) 2 7/16 (62)3 1/8 (79) 2 15/16 (75)3 3/8 (86) 3 7/16 (87)Overall Length and End CapPositionE MM MO MC OO OC CCLLD - 1/4 (6) D 1 3/8 (35)D - 1/8 (3) D 11/16 (17)D - 1/16 (2) D 3/4 (19)DDD - 1/16 (2) D - 1/16 (2)D - 1/8 (3)D - 1/8 (3)Options: SPSpecial Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORPage 1 of 2Dimensions are in inches (mm).DATEB SERIES1 - 19 - 16FLSUPERSEDES DRAWING NO.10 - 30 - 15Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.FLH-2A

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMHORIZONTAL HIGH THROW PATTERN CONTROLLERSMODEL SERIES: FLH TYPES CC, CCA, CCC & CCCAOne Slot Type CCC Concealed TaperedFrame with Concealed MountingBracketsTwo SlotEnd ConditionM Mitered End Border Type CCC Concealed Tapered Side Framewith Concealed Mounting BracketsDEDDLHH13/16"(21)13/16"(21)CCSCOW D 7/8" (22) Type CCCA Concealed TaperedFrame with Concealed MountingBrackets & Countersunk ScrewHolesSTSOW D 13/16" (21)C Type CCCA Concealed Tapered Side FrameO Open Endwith Concealed Mounting Brackets &Countersunk Screw HolesDEDDLHH13/16"(21)13/16"(21)CSTSOW D 13/16" (21)CSCOW D 7/8" (22)CC Flat End CapDimensional Data - Imperial (Metric) UnitsSModelSlot WidthFLH10FLH15FLH20FLH25FLH30Notes:1 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)D Duct Width1 Slot2 SlotCBorder Width3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7 1/2 (191)6 (152)8 (203)10 (254)12 (305)14 (356)1 11/16 (43)1 15/16 (49)2 3/16 (56)2 7/16 (62)2 11/16 (68)HHeightT2 Slot2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)1. Material: Heavy duty extruded aluminum frame and spacers.Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengthsare furnished in multiple sections with alignment strips, thenumber and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. MI Mill finish is standard on frame/borders CCC and CCCAwith an AW Appliance White center tee on the 2 slot model.Pattern controllers and interior surfaces are black.5. Types CCC and CCCA are supplied with concealed mountingbrackets and leveling screws on 24" (610) centers. Seeseparate submittal for accessories.1 Slot2 Slot3 (76)4 (102)5 (127)6 (152)7 (178)5 1/2 (140)7 1/2 (191)9 1/2 (241)11 1/2 (292)13 1/2 (343)E MM MO MC OO OC CCLD - 1/4 (6) D 1 3/8 (35)D - 1/8 (3) D 11/16 (17)D - 1/16 (2) D 3/4 (19)DDD - 1/16 (2) D - 1/16 (2)D - 1/8 (3)D - 1/8 (3)Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORLOverall Length and End CapPositionOptions: SPDECeiling Opening WidthPage 2 of 2Dimensions are in inches (mm).DATEB SERIES1 - 19 - 16FLSUPERSEDES DRAWING NO.10 - 30 - 15Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.FLH-2A

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMMODEL SERIES: FLH AND FLV TYPE CAEnd ConditionFLH Horizontal High Throw Pattern ControllersExposed Flange FrameW 1/4" (6)WW 1/4" (6)W13/16"(21)13/32"(10)SOWDEExposed Flange Frame Tape and Spackle (one side) Drywall (ceiling) Tape and Spackle (one side) Drywall (ceiling)COpen Endo Type CA Concealed Tapered/o Type CA Concealed Tapered/OTwo SlotOne SlotHL13/32"(10)13/16"(21)ASCTOWHCASFlat End CapDEFLV Vertical Jet Throw Pattern ControllersOne SlotTwo Sloto Type CA Concealed Tapered/o Type CA Concealed Tapered/Exposed Flange FrameExposed Flange Frame Tape and Spackle (one side) Drywall (ceiling) Tape and Spackle (one side) Drywall (ceiling)W 1/4" (6)WW 1/4" ASCTOWHASDimensional Data - Imperial (Metric) Units1 Slot2 SlotModelSSlot WidthWOWWOWFLH10, FLV10FLH15, FLV15FLH20, FLV20FLH25, FLV25FLH30, FLV301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)3 31/32 (101)4 31/32 (126)5 31/32 (152)6 31/32 (177)7 31/32 (202)4 15/16 (125)6 15/16 (176)8 15/16 (227)10 15/16 (278)12 15/16 (329)6 13/32 (163)8 13/32 (214)10 13/32 (264)12 13/32 (315)14 13/32 (366)CABorder Width Border Width1 11/16 (43)1 15/16 (49)2 3/16 (56)2 7/16 (62)2 11/16 (68)1 9/32 (33)1 17/32 (39)1 25/32 (45)2 1/32 (52)2 9/32 (58)Notes:1. Material: Heavy duty extruded aluminum frame and spacers. Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengths are furnished in multiple sections withalignment strips, the number and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. MI Mill finish is standard on frame/border C with an AW Appliance White finish on frame/border A andcenter tee on the 2 slot model. Pattern controllers and interior surfaces are black.5. Integral hanger brackets on 24" (610) centers. See separate submittal for optional mounting hardwareand accessories.HHeightT2 Slot2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)Overall Length and End CapPositionELo OODDo OC D - 1/16 (2) D - 1/16 (2)o CC D - 1/8 (3) D - 1/8 (3)Options:o SP Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORDimensions are in inches (mm).DATEB SERIES9 - 26 - 18FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.8 - 1 - 17FLH-2C

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMHORIZONTAL HIGH THROW PATTERN CONTROLLERSMODEL SERIES: FLH TYPES GG & AGOne SlotEnd ConditionTwo SlotJ Type GG Flangeless FrameJ Type GG Flangeless Frame Drywall (ceiling, wall)FDEW 1/4" (6)WW 1/4" (6)WHGSFlanged End Cap Drywall (ceiling, wall)HGGTSSLG)(251"J Type AG Flange / Flangeless FrameJ Type AG Flange / Flangeless Frame Drywall (ceiling, wall) Drywall (ceiling, wall)W 1/4" (6)WOOpen EndDEW 1/4" (6)WHHL13/32"(10)13/32"(10)ASGASTSGDimensional Data - Imperial (Metric) UnitsModelSSlot Width1 SlotW2 SlotWFLH101 (25)2 1 2 (64)4 15 16 (125)FLH1511 2 (38)13 2 (89)6 16 (176)171 32 (39) 8 (22)11 8 (29)1 15 16 (49)72 8 (67)1 32 (45)1 8 (35)2 8 (73)2 7 16 (62)FLH252 1 2 (64)5 1 2 (140)10 15 16 (278)2 1 32 (52)1 5 8 (41)3 1 8 (79)2 15 16 (75)3 (76)6 2 (165)12 16 (329)2 32 (58)Notes:1. Material: Heavy duty extruded aluminum frame andspacers. Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longerlengths are furnished in multiple sections with alignmentstrips, the number and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. Standard finish is AW Appliance White baked enamel onexposed frames with black pattern controllers and interiorsurfaces.5. Integral hanger brackets on 24" (610) centers. See separatesubmittal for optional mounting hardware and accessories.71 8 (48)33 8 (86)Flat End CapDE1 7 16 (37)58 16 (227)932 3 8 (60)4 2 (114)152572 (51)1151 9 32 (33)CT2 SlotFLH20FLH30115AGHBorder Width Border Width HeightL3 7 16 (87)Overall Length andEnd Cap PositionEJ OOJ OCJ CCJ FFJ FOJ FCDD- 1 16 (2)D- 1 8 (3)D- 1 4 (6)D- 1 8 (3)D- 1 16 (2)LDD - 1 16 (2)D - 1 8 (3)D 1 5 8 (41)D 13 16 (21)D 7 8 (22)Options:J SP Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORDimensions are in inches (mm).DATEB SERIES2 - 16 - 10FLSUPERSEDES DRAWING NO.10 - 18 - 07Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.FLH-3

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMHORIZONTAL HIGH THROW PATTERN CONTROLLERSMODEL SERIES: FLH TYPE GJOne SlotEnd Condition Type GJ Exposed / Concealed Offset FrameO Drywall (ceiling, wall)Open EndDEW 1/4" (6)WHLH 5/8"(16)GSJCDimensional Data - Imperial (Metric) UnitsFlat End CapDEModelSSlot Width1 SlotWGBorder WidthJBorder WidthHHeightFLH10FLH15FLH20FLH25FLH301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7/8 (22)1 1/8 (29)1 3/8 (35)1 5/8 (41)1 7/8 (48)7/8 (22)1 1/8 (29)1 3/8 (35)1 5/8 (41)1 7/8 (48)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)LOverall Length and End CapPosition OO OC CCELDD - 1/16 (2)D - 1/8 (3)DD - 1/16 (2)D - 1/8 (3)Notes:1. Material: Heavy duty extruded aluminum frame and spacers. Corrosionresistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengths arefurnished in multiple sections with alignment strips, the number and sizedetermined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. Standard finish is AW Appliance White on exposed frames. Patterncontrollers and interior surfaces are black.5. Integral hanger brackets on 24" (610) centers. See separate submittal foroptional mounting hardware and accessories.Options: SP Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORDimensions are in inches (mm).DATEB SERIES8 - 1 - 17FLSUPERSEDES DRAWING NO.Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.2 - 11 - 10FLH-3B

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMMODEL SERIES: FLH AND FLV TYPE KKFLH Horizontal High Throw Pattern ControllersEnd Condition Type KK Concealed Angular Frame Drywall (ceiling, wall)OOpen EndDEW 1/4" (6)WHLKSKFLV Vertical Jet Throw Pattern ControllersC Type KK Concealed Angular Frame Drywall (ceiling, wall)Flat End CapDEW 1/4" (6)WLHKSKDimensional Data - Imperial (Metric) UnitsModelSSlot Width1 SlotWKBorder WidthHHeightFLH10, FLV10FLH15, FLV15FLH20, FLV201 (25)1 1/2 (38)2 (51)2 1/2 (64)3 1/2 (89)4 1/2 (114)7/8 (22)1 1/8 (29)1 3/8 (35)2 3/8 (60)2 5/8 (67)2 7/8 (73)Notes:1. Material: Heavy duty extruded aluminum frame and spacers.Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longer lengthsare furnished in multiple sections with alignment strips, thenumber and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. Standard finish is MI Mill on exposed frames with black patterncontrollers and interior surfaces.Overall Length and End CapPosition OO OC CCELDD - 1/16 (2)D - 1/8 (3)DD - 1/16 (2)D - 1/8 (3)5. Integral hanger brackets on 24" (610) centers. See separatesubmittal for optional mounting hardware and accessories.Options: SP Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTORDimensions are in inches (mm).DATEB SERIES5 - 10 - 18FLSUPERSEDES DRAWING NO.Nailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.2 - 11 - 10FLH-3C

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMMODEL SERIES: FLH AND FLV TYPE CGEnd ConditionFLH Horizontal High Throw Pattern Controllerso Type CG ConcealedOTwo SlotOne SlotTapered/Flangeless Frame Tape and Spackle (one side) Drywall (ceiling)o Type CG Concealed Tape and Spackle (one side) Drywall (ceiling)W 1/4" (6)WH13/16"(21)SDETapered/Flangeless FrameW 1/4" (6)WCOpen EndLH13/16"(21)GCSTCGSFlat End CapDEFLV Vertical Jet Throw Pattern ControllersOne SlotTwo Sloto Type CG Concealed Tapered/Exposed Flange Frameo Type CG Concealed Tapered/Exposed Flange Frame Tape and Spackle (one side) Drywall (ceiling) Tape and Spackle (one side) Drywall (ceiling)W 1/4" (6)WW 1/4" (6)WH13/16"(21)CSLH13/16"(21)GCSTGSOverall Length and End CapPositionDimensional Data - Imperial (Metric) UnitsModelSSlot Width1 Slot2 SlotWWCBorder WidthGBorder WidthHHeightT2 SlotFLH10, FLV10FLH15, FLV15FLH20, FLV20FLH25, FLV25FLH30, FLV301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)4 15/16 (125)6 15/16 (176)8 15/16 (227)10 15/16 (278)12 15/16 (329)1 11/16 (43)1 15/16 (49)2 3/16 (56)2 7/16 (62)2 11/16 (68)7/8 (22)1 1/8 (29)1 3/8 (35)1 5/8 (41)1 7/8 (48)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)Notes:1. Material: Heavy duty extruded aluminum frame andspacers. Corrosion resistant steel pattern controllers.2. Maximum single section length is 144" (3658). Longerlengths are furnished in multiple sections with alignmentstrips, the number and size determined by the factory.3. Adjustable pattern controllers are on 24" (610) centers.4. MI Mill finish is standard on frame/border C with an AWAppliance White finish on frame/border G and center teeon the 2 slot model. Pattern controllers and interiorLo OODDo OC D - 1/16 (2) D - 1/16 (2)o CC D - 1/8 (3) D - 1/8 (3)surfaces are black.5. Integral hanger brackets on 24" (610) centers. Seeseparate submittal for optional mounting hardware andaccessories.Options:o SP Special Finish .SCHEDULE TYPEPROJECTENGINEERCONTRACTOREDimensions are in inches (mm).DATEB SERIES9 - 26 - 18FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.8 - 1 - 17FLH-3F

FLOWLINETM LINEAR SLOT DIFFUSERSACCESSORIESSUPPLY AIR ENGINEERED PLENUMSMODEL SERIES: FLPUninsulated Models:Internally Insulated Models:ooooooooooFLP10 1" (25) SlotFLP15 1 1/2" (38) SlotFLP20 2" (51) SlotFLP25 2 1/2" (64) SlotFLP30 3" (76) SlotFLPI10FLPI15FLPI20FLPI25FLPI30FlowlineTM Plenum 1" (25) Slot 1 1/2" (38) Slot 2" (51) Slot 2 1/2" (64) Slot 3" (76) Sloto Straight Leg (Direct Attachment)For use with Frame / Border TypesAA, CA, CC, CCA, CG, GG, GJ,KK, LT, NTPlenum Height (HS):One Slot 10" (254)Two Slot 16" (406)NOMINAL LENGTHPLENUM LENGTH (L)EARTHQUAKE / HANGER TABS1 1/4"(32)1"(25)WD - 1/8"(3)HSHSo Hemmed Leg (For concealed mounting bracket)For use with Frame / Border TypesAAC, CCC, CCCAPlenum Height (HH):One Slot 12" (305)Two Slot 18" (457)WNOMINAL LENGTHPLENUM LENGTH (L)EARTHQUAKE / HANGER TABS1 1/4"(32)1"(25)D - 1/8"(3)HHHHDimensional DataNominalLength24 (610)30 (762)36 (914)48 (1219)60 (1524)72 (1829)Actual Plenum Length (L)for Frame/ Border TypeAvailable Inlet SizesDAA, CA, CC, CCA, CG,GG, GJ, KK, LT, NTAAC, CCC,CCCA1 Slot2 Slot20 3/4 (527)26 3/4 (679)32 3/4 (832)44 3/4 (1137)56 3/4 (1441)68 3/4 (1746)24 (610)30 (762)36 (914)48 (1219)60 (1524)72 (1829)6 (152),8 (203)Round10 (254),12 (305),14 (356)Flat Oval*6 (152),8 (203),10 (254),12 (305),14 (356)RoundWidth (W) for Frame/Border Type P(I)30AA, CA, CC, CCA, CG,GG, GJ, KK, LT, NTAAC, CCC, CCCA1 Slot2 Slot1 Slot2 Slot2 3/4 (70)3 3/4 (95)4 3/4 (121)5 3/4 (146)6 3/4 (171)5 3/16 (132)7 3/16 (183)9 3/16 (233)11 3/16 (284)13 3/16 (335)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7 1/2 (191)5 15/16 (151)7 15/16 (202)9 15/16 (252)11 15/16 (303)13 15/16 (354)* Equivalent Oval: 10" (254) 11" x 7 7/8" (279 x 200); 12" (305) 14 1/8" x 7 7/8" (359 x 200); 14" (356) 17 5/16" x 7 7/8" (440 x 200).Notes:Options:1. Heavy gauge corrosion resistant steel construction.2. Earthquake tabs are standard.3. Straight leg plenums are supplied with spring clips.oooEX External Foil Back Insulation.ID ID Inlet damper.NI No Inlet.SCHEDULE TYPEPROJECTENGINEERCONTRACTORDimensions are in inches (mm).DATEB SERIES4 - 13 - 21FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.2 - 23 - 21FLP-1

FLOWLINETM LINEAR DIFFUSER PLENUMS WITHCABLE OPERATED INLET DAMPERFLOWLINETM LINEAR SLOT DIFFUSER ACCESSORYMODEL SERIES: FLP WITH IDCO OPTIONUninsulated Models:Internally Insulated Models:ooooooooooFLP10 1" (25) SlotFLP15 1 1/2" (38) SlotFLP20 2" (51) SlotFLP25 2 1/2" (64) SlotFLP30 3" (76) SlotFLPI10FLPI15FLPI20FLPI25FLPI30 1" (25) Slot 1 1/2" (38) Slot 2" (51) Slot 2 1/2" (64) Slot 3" (76) Sloto Straight Leg (Direct Attachment)For use with Frame / Border Types AA,CA, CC, CCA, CG, GG, GJ, KK, LT, NTW1"(25)10 (254)13 (330)15 (381)17 (432)16 (406)16 (406)16 (406)17 (432)D – 1/8" (3)6 (152), 8 (203)10 (254)12 (305)14 (356)HSo Hemmed Leg (For concealed mounting bracket)For use with Frame / Border TypesAAC, CCC, CCCAW12 (305)13 (330)15 (381)17 (432)NOMINAL LENGTHPLENUM LENGTH (L)EARTHQUAKE / HANGER TABS1"(25)18 (457)18 (457)18 (457)18 (457)D – 1/8" (3)6 (152), 8 (203)10 (254)12 (305)14 (356)HS2 3/4"(70)Plenum Height HH1 Slot2 SlotInlet Size D(Round)NOMINAL LENGTHPLENUM LENGTH (L)EARTHQUAKE / HANGER TABS2 3/4"(70)Plenum Height HS1 Slot2 SlotInlet Size D(Round)FlowlineTM PlenumHHDimensional DataNominalLength24 (610)30 (762)36 (914)48 (1219)60 (1524)72 (1829)Actual Plenum Length (L)for Frame/ Border TypeAA, CA, CC, CCA, CG, AAC, CCC,GG, GJ, KK, LT, NTCCCA20 3/4 (527)26 3/4 (679)32 3/4 (832)44 3/4 (1137)56 3/4 (1441)68 3/4 (1746)Notes:24 (610)30 (762)36 (914)48 (1219)60 (1524)72 (1829)1. Heavy gauge corrosion-resistant steelconstruction.2. Earthquake tabs are standard.3. Straight leg plenums are supplied withspring LP(I)30Width (W) for Frame/Border Type NotedAA, CA, CC, CCA, CG, GG, GJ, KK, LT, NTAAC, CCC, CCCA1 Slot2 Slot1 Slot2 Slot2 3/4 (70)3 3/4 (95)4 3/4 (121)5 3/4 (146)6 3/4 (171)5 3/16 (132)7 3/16 (183)9 3/16 (233)11 3/16 (284)13 3/16 (335)4. The round inlet damper is Nailor’s 4250radial sliding blade design factory mountedon the inlet. A flexible rotary cableconnects the damper to a Phillips headscrew operator mounted inside the plenumSCHEDULE TYPEPROJECTENGINEERCONTRACTOR3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7 1/2 (191)5 15/16 (151)7 15/16 (202)9 15/16 (252)11 15/16 (303)13 15/16 (354)that permits air balancing at the diffuserface.Options:o EXExternal Foil Back Insulation.Dimensions are in inches (mm).DATEB SERIES4 - 13 - 21FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.1 - 26 - 21FLP-2

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMRETURN (NO PATTERN CONTROLLERS)MODEL SERIES: FLR TYPES AA & AACOne SlotTwo SlotEnd Conditiono Type AA Exposed Flange Frameo Type AA Exposed Flange FrameM Drywall (ceiling, wall), T-BarDrywall (ceiling, wall), T-BarW 1/4" (6)WDEW 1/4" FLR25FLR301 SlotWOW2 1/2 (64)3 9/16 (90)3 1/2 (89)4 9/16 (116)4 1/2 (114) 5 9/16 (141)5 1/2 (140) 6 9/16 (167)6 1/2 (165) 7 9/16 (192)SSlot Width1 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 SlotW4 15/16 (125)6 15/16 (176)8 15/16 (227)10 15/16 (278)12 15/16 (329)o Type AAC Exposed Flange Frame SAOWDimensional Data - Imperial (Metric) UnitsModelMitered End BorderOW6 (152)8 (203)10 (254)12 (305)14 (356)ABorder WidthHHeightT2 Slot1 9/32 (33)1 17/32 (39)1 25/32 (45)2 1/32 (52)2 9/32 (58)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)FFlanged End CapType AA Border OnlyDEo Type AAC Exposed Flange Frame Drywall (ceiling)Drywall (ceiling)DLD1"HHO13/32"(10)13/32"(10)A)(25SAOW D 1/16" (2)ASTOW DSOpen EndDEADimensional Data - Imperial (Metric) UnitsModelSSlot WidthFLR10FLR15FLR20FLR25FLR301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)D Duct Width1 Slot2 Slot3 1/2 (89)6 (152)4 1/2 (114)8 (203)5 1/2 (140)10 (254)6 1/2 (165)12 (305)7 1/2 (191)14 (356)Ceiling Opening Width1 Slot2 Slot3 (76)5 1/2 (140)4 (102)7 1/2 (191)9 1/2 (241)5 (127)11 1/2 (292)6 (152)13 1/2 (343)7 (178)Notes:ABorder WidthHHeightT2 Slot1 9/32 (33)1 17/32 (39)1 25/32 (45)2 1/32 (52)2 9/32 (58)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)1. Material: Heavy duty extruded aluminum frame and spacers.2. Maximum single section length is 144" (3658). Longer lengths arefurnished in multiple sections with alignment strips, the number and sizedetermined by the factory.3. AW Appliance White finish with black interior surfaces is standard onframe/borders AA and AAC. Optional finishes are available.4. Frame/Border Type AA is supplied w/integral hanger brackets on24" (610) centers. Frame/Border Type AAC is supplied with concealedmounting brackets and levelling screws on 24" (610) centers. Seeseparate submittal for optional mounting hardware and accessories.Option:oSP Special Finish .Overall Length & End Cap PositionoooooooooMMMOMCOOOCCCFFFOFCCFlat End CapDEELD - 1/4 (6)D - 1/8 (3)D - 1/16 (2)DD - 1/16 (2)D - 1/8 (3)D - 1/4 (6)D - 1/8 (3)D - 1/16 (2)D 9/16 (14)D 9/32 (7)D 11/32 (9)DD - 1/16 (2)D - 1/8 (3)D 1 5/8 (41)D 13/16 (21)D 7/8 (22)SCHEDULE TYPEPROJECTENGINEERCONTRACTORLLDimensions are in inches (mm).DATEB SERIES2 - 25 - 21FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.NEWFLR-1

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMRETURN (NO PATTERN CONTROLLERS)MODEL SERIES: FLR TYPES CC, CCA, CCC & CCCACONCEALED SURFACE MOUNT APPLICATION DRYWALL (CEILING/WALL) TAPE & SPACKLEOne SlotEnd ConditionTwo Sloto Type CC Concealed TaperedFrameo Type CC Concealed Tapered FrameHCSOWDEW 1/4" (6)WW 1/4" (6)W13/16"(21)M Mitered End BorderH13/16"(21)LCCSTSCOWo Type CCA Concealed TaperedFrame with CountersunkScrew Holeso Type CCA Concealed Tapered Side Framewith Countersunk Screw Holes13/16"(21)O Open EndW 1/4" (6)WW 1/4" (6)WDE13/16"(21)HHLCSOWCCSTSCOWDimensional Data - Imperial (Metric) Units1 Slot2 SlotModelSSlot WidthWOWWOWCBorder WidthHHeightT2 SlotFLR10FLR15FLR20FLR25FLR301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)2 1/2 (64)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)4 3/8 (111)5 3/8 (137)6 3/8 (162)7 3/8 (187)8 3/8 (213)4 15/16 (125)6 15/16 (176)8 15/16 (227)10 15/16 (278)12 15/16 (329)6 13/16 (173)8 13/16 (224)10 13/16 (275)12 13/16 (325)14 13/16 (376)1 11/16 (43)1 15/16 (49)2 3/16 (56)2 7/16 (62)2 11/16 (68)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)Notes:1. Material: Heavy duty extruded aluminum frame andspacers.2. Maximum single section length is 144" (3658). Longerlengths are furnished in multiple sections with alignmentstrips, the number and size determined by the factory.3. MI Mill finish is standard on frame/border CC with an AWAppliance White center tee on the 2 slot model. Interiorsurfaces are black.4. Type CC and CCA have integral hanger brackets on 24"(610) centers. See separate submittal for Type CC optionalmounting hardware and accessories.C Flat End CapDEOverall Length and End CapPositiono MMo MOo MCo OOo OCo CCLELD - 1/4 (6)D - 1/8 (3)D - 1/16 (2)DD - 1/16 (2)D - 1/8 (3)D 1 3/8 (35)D 11/16 (17)D 3/4 (19)DD - 1/16 (2)D - 1/8 (3)Options:oSP Special Finish .Page 1 of 2Dimensions are in inches (mm).SCHEDULE TYPEPROJECTENGINEERCONTRACTORDATEB SERIES2 - 25 - 21FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.NEWFLR-2

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMRETURN (NO PATTERN CONTROLLERS)MODEL SERIES: FLR TYPES CC, CCA, CCC & CCCAOne SlotTwo Sloto Type CCC Concealed TaperedFrame with Concealed MountingBracketswith Concealed Mounting BracketsEnd ConditionLHH13/16"(21)13/16"(21)CSCOW D 7/8" (22)o Type CCCA Concealed TaperedFrame with Concealed MountingBrackets & Countersunk ScrewHolesDEDDCM Mitered End Bordero Type CCC Concealed Tapered Side FrameTSSOW D 13/16" (21)Co Type CCCA Concealed Tapered Side FrameO Open Endwith Concealed Mounting Brackets &DECountersunk Screw HolesDDLHH13/16"(21)13/16"(21)CCSCOW D 7/8" (22)TSSOW D 13/16" (21)CC Flat End CapDimensional Data - Imperial (Metric) UnitsD Duct WidthModelSSlot Width1 SlotFLR10FLR15FLR20FLR25FLR301 (25)1 1/2 (38)2 (51)2 1/2 (64)3 (76)3 1/2 (89)4 1/2 (114)5 1/2 (140)6 1/2 (165)7 1/2 (191)2 SlotCBorder WidthHHeightT2 Slot6 (152)8 (203)10 (254)12 (305)14 (356)1 11/16 (43)1 15/16 (49)2 3/16 (56)2 7/16 (62)2 11/16 (68)2 3/8 (60)2 5/8 (67)2 7/8 (73)3 1/8 (79)3 3/8 (86)1 7/16 (37)1 15/16 (49)2 7/16 (62)2 15/16 (75)3 7/16 (87)Notes:1. Material: Heavy duty extruded aluminum frame andspacers.2. Maximum single section length is 144” (3658). Longerlengths are furnished in multiple sections with alignmentstrips, the number and size determined by the factory.3. MI Mill finish is standard on frame/borders CCC and CCCAwith an AW Appliance White center tee on the 2 slot model.Interior surfaces are black.4. Types CCC and CCCA are supplied with concealedmounting brackets and leveling screws on 24” (610)centers. See separate submittal for accessories.DECeiling Opening Width1 Slot2 Slot3 (76)4 (102)5 (127)6 (152)7 (178)5 1/2 (140)7 1/2 (191)9 1/2 (241)11 1/2 (292)13 1/2 (343)LOverall Length and End CapPositiono MMo MOo MCo OOo OCo CCELD - 1/4 (6)D - 1/8 (3)D - 1/16 (2)DD - 1/16 (2)D - 1/8 (3)D 1 3/8 (35)D 11/16 (17)D 3/4 (19)DD - 1/16 (2)D - 1/8 (3)Options:oSP Special Finish .Page 2 of 2Dimensions are in inches (mm).SCHEDULE TYPEPROJECTENGINEERCONTRACTORDATEB SERIES2 - 25 - 21FLNailor Industries Inc. reserves the right to change any information concerning product or pricing without notice.SUPERSEDES DRAWING NO.NEWFLR-2

FLOWLINETM LINEAR SLOT DIFFUSERSARCHITECTURAL ALUMINUMFO

Type CCC Concealed Tapered M Mitered End Border Frame with Concealed Mounting Brackets Type CCC Concealed Tapered Side Frame with Concealed Mounting Brackets O Open End C Flat End Cap SCHEDULE TYPE PROJECT ENGINEER CONTRACTOR DATE B SERIES SUPERSEDES DRAWING NO. 1 - 19 - 16 FL 10 - 30 - 15 FLH-2A FLOWLINE TM LINEAR SLOT DIFFUSERS

Related Documents:

Nov 15, 2013 · XTREME MACHINE WHEELS Continued from previous page. Front Wheel Applications Cont. Disc Year Fierce Launch Reaper Stiletto Turbo Retail 21" x 3.5" Cont. Black Cut Xquisite FLH/FLT-Non-ABS Single 2014 67-8730 67-8733 1399.95 FLH/FLT-With ABS Single 2014 67-8736 67-8739 1449.95 FLH/FLT-Non-ABS Single 08-1

Steering Damper for FLH Harley-Davidson Bikes/Trikes I have spoken with several HD Touring model trikers, who are looking for increased ‘feel’ in the steering department. Some want to cure a slight ‘wobble’ and some feel that raked trees make the steering too easy at freeway (or better) speeds. I fall into the latter

DPP Submittal 4 This is mostly an issue with model corrections Example: 1 DPP could be a seasonal model . *If there is a discrepancy in data between the DPP Submittal Form and the IDEV file, the IDEV data is used. . o 46% - DPP Submittal Form issues

1 Use with Arlen Ness Hot Legs Only 2 Exc. 2007 models HARLEY-DAVIDSON Year Size Description P/N Retail FLH, FLT 14-17 21” Wrapper Fender 2636761 29.95 FLH, FLT 14-17 21” FLT Fender Bracket 263463 29.95 Description Width Wheel Size

FrontPoint to FLH, I begin with the language of contract. Section 1.1 of the AP A provides 6 Case 1:16-cv-05263-AKH Document 393 Filed 07/26/19 Page 6 of 15. that FLH purchases "all of [FrontPoint's] right, title and interest in all of the Assets, including, without limitation, all of [FrontPoint' s] right, title and interest in all of the .

and cut sheets of all devices and panels. REVISIONS : - Need Revision Submittal form - Need Architect's Narrative - Need clouds and deltas - Signature is required. www.davie-fl.gov Deerfield Beach (8/27/2015) EPD submittal / Approval required prior to Bldg Dept submittal. Apply 'on-line' for Security Code & Application Number. Walk-thru review .

The submittal items managed for a project can be packaged in the e-Builder system. The packages can be categorized by trade or CSI code, depending on the needs of the user managing the items. Once a Submittal Package is created, items contained in the Submittal Register can be added to their perspective package and transmitted for a formal .

Secret weapon for 70% white hair coverage. Ammonia freepermanent colour. Result: Luminous reflects and added volume. Perfect for: Women who want a multi-dimensional result and white hair coverage. Classic, rich permanent colour that treats the hair while colouring. Result: Intense and long lasting colour. Perfect for: Women who want the ultimate radiant colour results with absolute confidence .