Hikvision Video Intercom SIP Funcion Introducion 2019-12-03

2y ago
22 Views
2 Downloads
1.06 MB
17 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Tia Newell
Transcription

Hikvision video intercom SIP function Introduction(2019-12-03)Product involved:Device ModelFirmwareDS-KH8350-WTE1v2.1.2 build191014DS-KH8350-TE1v2.1.2 build191014DS-KH6320-WTE1v2.1.2 build191014DS-KH6320-TE1v2.1.2 build191014DS-KH8520-WTE1v2.1.2 build191014DS-KH6320-WTE2v2.1.2 build191014DS-KD8003-IME1v2.0.8 build191029DS-KD8003-IME2v2.0.8 build191029List of supported SIP tyAsteriskAll YeastarAll Minisipv34/v36 Pbxwarev.4.1/v5.2/v5.3 BrekekeV3.4.9 : Support Video and Audio : Only support Audio : Support alarm upload : Not support nowNote:

1. Since standard SIP services involved DDNS, signaling forwarding, diverseaudio and video formats, The function of existing Hikvision standard SIP islimited.2. If you have any questions about SIP, please complete this excel sheet andcontact Hikvision's technical support.SIPinformation.xlsx3. In the public network environment, the video transmission of the device islimited by many factors. It will cause poor picture quality, inability todisplay pictures, and so on when congestion, long latency and packet loss.Table of ContentsWhat’s SIP.2How to add new user in brekeke SIP server.3How to configure device's SIP service through the client.4How to configure indoor station’s SIP service through local interface. . .6How to set the SIP phone and how to use the SIP phone to open the door. . .9List of supported SIP phone.14If you still have questions about the Hikvision SIP service, please ��s SIPThe Session Initiation Protocol (SIP) is a signaling protocol used forinitiating, maintaining, and terminating real-time sessions that include voice,video and messaging applications. The SIP system works flow as below figure.

Hikvision video intercom version1.5.0 and above support private SIP andstandard SIP switchable. Standard SIP is a common protocol which means devicecould be integrated with 3rd Party standard SIP devices. The Comparison ofprivate protocol and standard SIP protocol as below table.Indoor stationHikConnect APPIndoor extensionLive viewCall to the door stationPrivate passwordAutomatic capture picturePrivate Protocol SIP Protocol Door stationSub-door stationDoorphone ModeOuter door stationPublic passwordPrivate Protocol SIP Protocol So we strongly suggest to use Hikvision private protocol when all intercomvideo equipment from Hikvision company. If need to interconnect with 3 rd partySIP terminal, we have to change intercom protocol from private protocol to SIPProtocol on the related Hikvision intercom video equipment. This document willintroduce how to configure SIP Protocol between Hikvision intercom videoequipment and 3rd party’s.

How to add new user in brekeke SIP server1. Login the SIP server via IE web and add the new users for indoor station /door station / 3rd party SIP phone / etc.1) User is unique in same SIP server.2) Name is local parameter for reference in SIP database.3) Email address and Description are option.2. Click MAINTENANCE button and record SIP server IP & local port which will beused in SIP client (indoor station / door station / 3 rd party SIP phone / etc)configuration.

How to configure device's SIP service throughthe client1. Add the device to the Client and status is online.2. Click the remote configuration System Maintance restore defaultsettings, and set the settings as default. (option)3. Click the remote configuration Intercom Intercom Protocol, and changethe protocol to ‘SIP protocol’, then click reboot the device.

4. Click the remote configuration Network SIP settings, check the userdata which you set in your SIP server, then fill the corresponding column.Server Domain: SIP server IP addressServer Port: SIP local portUser Name: SIP userLocal No.: If no No. in SIP server setting, re-use SIP user as local No.5. Click save button to register device on SIP server. Refresh the window andcheck whether the device has been registered or not. If yes, login status willbe updated as below.

How to configure indoor station’s SIP servicethrough local interface1. click the Settings button2. Select ‘More’ interface then click the Configuration

Then input the admin password which is 888999.3. Select ‘SIP Settings’ interface and click the SIP Protocol SettingsSelect Standard Protocol

Then click OK to reboot the device.4. The SIP Settings window will be changed like below picture. Click the VOIPAccount Setting to set the SIP register information.5. Input SIP user information, same from SIP server side.

Please enterPlease enteryour No.Please enterPlease enterPlease enterPlease enterthe user name: local parameter for reference.your number: If no No. in SIP server setting, re-use SIP user asyour User Name: SIP userThe SIP Server Domain: SIP server IP addressThe SIP Server Port: SIP local portthe expiration date: as your system design6. Go back to the main window and below icon shows SIP registered successes.How to set the SIP phone and how to use theSIP phone to open the doorNote: Test example product is GXV3275 of Grand Stream. Firmware: 1.0.1.54

a. Configuring the GXV3275 Using Web BrowserThe default username and password for administrator are “admin”“admin”;The default username and password for user are “user” and “123”.andClick the Account Account1 (any Account 1 6 is ok) to set the SIP account.The interface is shown below and input SIP user information, same with serverside.

Click the Save icon and select ‘Apply’Then go back to the status interface to confirm that the device is registeredto the sip serverb. Configuring the GXV3275 by local interfaceClick the Settings to enter settings interface

Click Account to enter the SIP account interfaceWe only use the Account1 (any Account 1 6 is ok), so enter the account1interfaceSIP server example and finished condition

Go back to the main interface and below shows the SIP phone connected to SIPserver.c. Test to use the door station to call the SIP phoneClick the Video Answer to answer the call

And you can choose to use the keypad, press key ‘#’ to open the doorList of supported SIP phoneGrandStream GXV3275Yealink SIP-T46G

First Choice for Security ProfessionalsHIKVISION Technical Support

How to add new user in brekeke SIP server 1. Login the SIP server via IE web and add the new users for indoor station / door station / 3rd party SIP phone / etc. 1) User is unique in same SIP server. 2) Name is local parameter for reference in SIP database. 3) Email address and Description are option. 2.

Related Documents:

SIP SIP phones Blustar 8000i NA SIP SIP phones 9112i, 9133i, 480i Not Supported SIP SIP phones 673xi ( A673xi), 675xi ( A675xi) NA SIP SIP phones 6735i, 6737i ( A6735i, A6737i) NA SIP SIP phones 6739i NA SIP SIP phones 6863i, 6865i, 6867i NA SIP MiVoice Conference phone (UC360

JB-2MED, JB-2MD, JB-2HD HANDSFREE COLOR VIDEO INTERCOM HANDSFREE COLOR VIDEO INTERCOM HANDSFREE COLOR VIDEO INTERCOM HANDSFREE COLOR VIDEO INTERCOM HANDSFREE COLOR VIDEO INTERCOM JB-2MD . Use Aiphone Power Supply or specified one by Aiphone. If not used, it may be a possible cause of fire or malfunction. GENERAL PRECAUTIONS 1.

C O N T E N T S Configuration of SIP Trunking for PSTN Access SIP-to-SIP 1 Finding Feature Information 1 Configuration of SIP Trunking for PSTN Access SIP-to-SIP Features 1 Configuring SIP Registration Proxy on Cisco UBE 3 Finding Feature Information 3 Registration Pass-Through Modes 4 End-to-End Mode 4 Peer-to-Peer Mode 5 Registration in Different Registrar Modes 7

HIKVISION Outdoor Network PTZ Speed Dome Camera User Manual Home » Hikvision » HIKVISION Outdoor Network PTZ Speed Dome Camera User Manual HIKVISION Outdoor Network PTZ Speed Dome Camera. Contents [ hide . Client iVMS-4200, iVMS-4500 Web Browser IE 7 , Chrome 18 , Firefox 5.0 , Safari 5.02 General

How To Guide: SIP Trunking Configuration Using the SIP Trunk Page 6(19) 2.2 The SIP Trunk Page The SIP Trunk pages are found under SIP Trunks. Several SIP Trunk pages may be defined if you have several PBXs or Trunk Services. You need to purchase Additional Trunk Group licensees to get more than one SIP Trunk page. Details are found below. s d he n

To support SIP trunks through a SIP trunk service provider, the SIP Trunk Groups folder was added to the SIP Peers folder in DB Programming. To create a SIP Trunk Group for Fusion Connect Service Provider, navigate to System- Device and Feature Codes- SIP Peers- SIP Trunk Groups and right click in the right hand pane. Then select "Create SIP .

Call Flow Scenarios for Successful Calls This section describes call flows for the following scenarios, which illustrate successful calls: SIP Gateway-to-SIP Gateway—Call Setup and Disconnect, page 7-3 SIP Gateway-to-SIP Gateway—Call via SIP Redirect Server, page 7-6 SIP Gateway-to-SIP Gateway—Call via SIP Proxy Server, page 7-9

Python: Introduction for Programmers Bruce Beckles Bob Dowling University Computing Service Scientific Computing Support e-mail address: escience-support@ucs.cam.ac.uk This is the UCS one day course on Python for people who have some experience of programming in a programming language other than Python. The course assumes that you