Programmable Terminal NT Series Datasheet
Programmable TerminalNT SeriesCSM NT series DS E 2 5Better Compatibility andEasier-to-use Support Software Device monitoring and I/O comment loading functionsfacilitate system construction. Greatly enhanced NT Support Software with reusablescreen data and powerful simulation on editing screens. Transfer the system program and screen data to ensuresmooth on-site system maintenance and improve theefficiency of onsite work. Wide Range of Communications Interfaces.NT31/CNT20NT631CNote: NT31 and NT31C in this catalog have been discontinued atthe end of March 2014.NT20 in this catalog have been discontinued at the end ofSeptember EV3TFT color displayEffective display area211 158 mm118 89 mm111.5 57.6 mmNumber of dots (resolution)640 480 dots320 240 dots256 128 dotsMax. number of touch switches32 24 switches16 12 switches12 6 switchesExternal interfaceRS-232C, RS-422A, RS-485, and printer portFrom OMRON(See note 2.)FromMitsubishiConnectablehosts(See note 1.)STN monochrome displayNT20-ST121(B)DisplayApplicable standardsSTN color displayNT31-ST123(B)-EV3STN monochrome display2 RS-232C portscULus standards, EC Directives, and C-Tick1-to-1 NT LinkC200HX(-Z), C200HG(-Z), C200HE(-Z), C200HS-CPU2@, and C200HS-CPU3@CQM1-CPU4@, CPM1A, CPM2A/C, SRM1, CVM1/CV Series (EV1 or EV2), and C200HX/HG/HE Communications Boards1-to-N NT LinkCJ1@, CS1H, CS1G, C200HX(-Z), C200HG(-Z), C200HE(-Z), and SRM1-EV2CS1 Communications Unit and CQM1H Communications BoardHigh-speed NTLinkCJ1@, CS1H and CS1GHost LinkCJ1@(-H), CS1@(-H), C200HX(-Z), C200HG(-Z), C200HE(-Z), C200HS-CPU2@, C200HS-CPU3@ and CS1Communications UnitsCQM1-CPU4@, CQM1-CPU2@, CPM1A, CPM2A, CPM1C, SRM1, CVM1, CVseries (EV1 or EV2), C-series/CV-series/CVM1 Host Link UnitMemory LinkPersonal Computer, SBC, and Programmable ControllerMitsubishi FXSeriesMELSEC FX1, FX2, FX2C, FXO, and FXONMitsubishi ASeries(Computer LinkUnit)AOJ2-C214S1, A1SJ71UC24-R2,A1SJ71UC24-R4, and AJ71UC24Personal computer, SBC, orPLC (RS-232C)(See note 5.)Allen Bradley (DE1)SLC 5/02, 03, 04, and 05 (See note 3.) GE-Fanuc (SNP-X)90-20 and 90-30 Series (See note 3.) Siemens (Via HMIAdapter)S7-300 and S7-400 Series (See note 3.) JapaneseLanguageEnglishSimplified Chinese(See notes 4, 5, and 6.)Traditional Chinese(See note 4.) Note: 1. Including models whose production were discontinued.2. There are some limitations on hosts that can be connected. Refer to the PT manual for details. C200H direct connections can be usedwith the NT20-ST121 (using the NT20-IF001).3. The English version of the NT Support Tool must be used.4. Simplified Chinese is mostly used in mainland China and uses simplified characters. Traditional Chinese is mostly used in Hong Kongand Taiwan and uses traditional characters.5. Purchase the NT20-ST121(B)-EC to display simplified Chinese on the NT20.6. A separate system program must be installed in the NT20 to use RS-232C memory links with the NT20. Simplified Chinese is notsupported.1
NT SeriesOrdering InformationInternational Standards The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations),C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards.Programmable TerminalsItemNT631CSpecificationTFT colorSTN colorNT31/NT31CSTN monochromeNT20STN monochromeModelFrame color: beigeNT631C-ST153-EV3Frame color: blackNT631C-ST153B-EV3Frame color: beigeNT31C-ST143-EV3 *Frame color: blackNT31C-ST143B-EV3 *Frame color: beigeNT31-ST123-EV3 *Frame color: blackNT31-ST123B-EV3 *Frame color: beigeNT20-ST121-E *Frame color: blackNT20-ST121B-E *StandardsCU, CE* Production was discontinued.Programming DevicesItemSupport SoftwareCableSpecificationModelEnglishWindows 98, NT, 2000, Me, XP, Vista, or 7.Note: Except for Windows XP 64-bit version.(provided on CD-ROM)NT-ZJCAT1-EV4Memory Unit for Screen TransferNT631C/NT31@/NT20 (common)NT-MF261For screen transferFor IBM PC/AT or compatible (2 m)XW2Z-S002PrinterFor hardcopies of screensNT-CNT121Standards OptionsItemSpecificationModelDeviceNet Interface UnitAnti-reflection Sheets(surface only)NT631C (5 sheets)NT610C-KBA04NT31/31C (5 sheets)NT30-KBA04NT20 (5 sheets)NT20-KBA04NT631C (5 sheets) glareNT631C-KBA05NT631C (5 sheets) non-glareNT631C-KBA05NNT31/31C (5 KBA01NT20NT20-KBA01BatteryNT631C/NT31@/NT20 (common)C500-BAT08Bar-code ReaderRefer to the Catalog for details.V520-RH21-6 *2RS-422A ConverterFor NT20 ports A and BCJ1W-CIF11Interface AttachmentFor NT20NT20-IF001Protective CoverOptionChemical resistant cover(silicon cover)StandardsNT-DRT21 *1U, C UC1, N, L, CE *1. Production was discontinued.*2. Bar Code Reader (V520-RH21-6) was discontinued at the end of August 2016.Communications Cable between PT and PLCPT endD-sub9-pin connectorNT631C port A or BNT31/NT31C port ANT20 port A or BPLC endD-sub 9-pin connectorD-sub 25-pin connectorD-sub 9-pin connectorD-sub25-pin connectorNT31/NT31C port BD-sub 25-pin connectorCable lengthCable ds 2
NT SeriesSpecifications NT631CGeneral SpecificationsDisplay SpecificationsNT631C-ST153(B)-EV320.4 to 26.4 VDC (24 VDC -15%/ 10%)18 W max.-20 to 60 C35% to 85% (with no condensation)No corrosive gasesVibration resistance(during operation)Shock resistance (duringoperation)WeightDegree of protection (frontpanel)Display elements0 to 50 CConforms to IEC 61000-4-4 at 2 kV (powersupply line).5 to 9 Hz, single amplitude: 3.5 mm9 to 150 Hz, 9.8 m/s²10 times (1 octave/min) each in X, Y, and ZdirectionsNoise immunityItem24 VDC147 m/s², 3 times each in X, Y, and Z directions2.5 kg max.Equivalent to IP65 oil-proof type and NEMA4(See note.)Note: The equipment cannot be used for long periods of time inlocations which expose the panel to spills of oil.Screen typesModelItemRated power supply voltageAllowable power supplyvoltage rangePower consumptionAmbient operatingtemperatureStorage temperatureAmbient operating humidityAmbient operatingenvironmentDisplay/Panel SpecificationsDisplayBacklightLEDModelDisplay deviceNumber of dots(resolution)Effective displayareaNT631C-ST153(B)-EV3Color TFT LCD640 dots (horizontal) 480 dots (vertical)211 158 mm(10.4 inches)8 colorsDisplay color(intermediate colors can be displayed in tilingpatterns)50,000 hoursService life(until contrast is reduced by 50%)Automatic turn-OFF 1 to 255 minutes/NoneService life whenbrightness is set to 50,000 hours min. (See note.)high)POWER GreenLit while power is being supplied.GreenLit during operationLit when the battery voltage is low (whenOrangeoperating)RUNLit when the battery voltage is low (whenRedstopped)Note: The time until brightness is reduced by half, under normaltemperature and normal humidity.Trend graphsBroken line graphsLampsImage library displaysTouch switchesNumeral inputsThumbwheel switchesCharacter string inputsAlarm listsAlarm historiesNormal screenOverlapping screensWindow screensDisplay history screensScreen attributesNumber of screensItemModelCharacter displays (fixed display)Graphic displaysCharacter string displaysNumerical displaysBar graph displaysAnalogue meterMax. number ofregistered screensItemTouchpanelModelNumber of switchesInputOperating forceService lifeNT631C-ST153(B)-EV3768 (32 24)Pressure sensitive1 N max.1,000,000 operations min.Screen No.Screen registration methodScreen saving methodModelSerial port ASerialcommunicationsSerial port BParallel I/FExpansion I/FNT631C-ST153(B)-EV3Conforms to EIA RS-232C.D-sub 9-pin connector (female) 5 V (250 mA max.) output at pin No. 6EIA RS-232C, (RS-422A/485 selectable bymemory switch setting)RS-232C: D-sub 9-pin connector (female)RS-422A/485: Terminal block (6 terminals)Conforms to Centronics specifications,20-pin half-pitch connectorDedicated connectorUp to 256 per screenUp to 256 per screenUp to 4 groups per screenThe normal screen displayA maximum of 8 registered screens can bedisplayed overlapped with each other.Up to 3 screens (2 local windows and 1 globalwindow) can be displayed at the same time.Order of occurrence (max. 1,024 screens), orderof frequency (max. 255 times)Buzzer, display history, background color,backlight, keyboard screen number0: No display1 to 3999: User-registered screens9000: "Initializing system" screen9001: Display history (occurrence order) screen9002: Display history (frequency order) screen9020: Programming Console function screen9999: Return to the previous screen9021 to 9023: Device monitorBy transmitting screen data created using theSupport Tool to the NT631CBy transmitting screen data stored in a memoryunit to the NT631CFlash memory (screen data memory in the PT)Display Element SpecificationsItemModelDisplay charactersSmoothing processingCharacter display attributeImage dataExternal I/F SpecificationsItemUp to 256 per screen (40 bytes (40 characters) per string)256 per screen, max. 10-digit display (2 words)Up to 50 per screen, percentage display and sign display are possible.Up to 50 per screen, percentage display and sign display are possible.One frame per screen, 50 graphs per frame(only 8 graphs per frame with data logging)One frame per screen, 256 graphs per frame,512 points per graphUp to 256 per screenUp to 256 per screenUp to 256 per screen, Max. overlap: 256 mesh3,999 screensEnlargement functionOperation SpecificationsNT631C-ST153(B)-EV365,535 per screen (including marks)Library dataGraphicsLine typeTillingGraphic display attributeDisplay colorsNT631C-ST153(B)-EV3Half-size characters (8 8 dots): Alphanumerics and symbolsNormal-size characters (8 16 dots): Alphanumerics and symbolsMark data (16 16 dots): User defined picture charactersNormal size, double width, double height, andmagnifications of 4X, 9X, 16X, 64XAvailable for enlarged characters withmagnification of 4X or greater (excluding marks)Normal, reverse, flashing, reverse and flashing, transparentVariable-size pictographSize: Min. 8 8 dots, Max. 640 480 dotsThe size can be set in 8-dot units.It is not possible to set enlarged display,smoothing processing, or display attributes suchas reverse/flashing.Combination of any characters and graphicsSize: Min. 1 1 dots, Max. 640 480 dotsAny size can be set.Enlarged display, smoothing processing, anddisplay attributes such as reverse/flashing aredisplayed according to the setting registered.Polyline, circle, arc, fan, square, polygonSolid line, dotted line, alternate long and short dash, long andtwo short dashes (only polylines for other than solid lines)10 typesNormal, flashing, reverse, reverse flashing8 colors (black/blue/red/purple/green/light blue/yellow/white)Data CapacitiesModelNT631C-ST153(B)-EV31 MB2 words x up to 2,000 (1,000 tables can beNumeric memory tablebacked up with battery)40 normal-size characters x up to 2,000 (DataCharacter string memory tablecan be written to and read from 500 tables)Bit memory table1 bit 1,000Mark data224 (16-by-16-dot basis)Image data4,095 itemsLibrary data12,288 itemsItemScreen data capacity3
NT SeriesSpecifications NT31/NT31CDisplay SpecificationsGeneral 24 VDC20.4 to 26.4 VDC (24 VDC -15%/ 10%)15 W max.-20 to 60 C35% to 85% (with no condensation)No corrosive gasesVibration resistance(during operation)Shock resistance (duringoperation)WeightDegree of protection (frontpanel)Display elements0 to 50 CConforms to IEC 61000-4-4 at 2 kV (powersupply line).5 to 9 Hz, single amplitude: 3.5 mm9 to 150 Hz, 9.8 m/s²10 times (1 octave/min) each in X, Y, and ZdirectionsNoise immunityItem147 m/s², 3 times each in X, Y, and Z directions1 kg max.Equivalent to IP65 oil-proof type and NEMA4(See note.)Note: The equipment cannot be used for long periods of time inlocations which expose the panel to spills of oil.Screen typesModelItemRated power supply voltageAllowable power supplyvoltage rangePower consumptionAmbient operatingtemperatureStorage temperatureAmbient operating humidityAmbient operatingenvironmentDisplay/Panel SpecificationsDisplay deviceNumber of dots(resolution)Effective displayareaDisplayBacklightLEDDisplay colorService lifeAutomatic turnOFFContrastadjustmentService life (whenbrightness is set tohigh)BrightnessadjustmentPOWER GreenGreenRUNOrangeRedNT31-ST123(B)-EV3Monochrome STNLCDNT31C-ST143(B)-EV3Color STN LCD320 dots (horizontal) 240 dots (vertical)118.2 89.4 mm (5.7 inches)8 colors (intermediatecolors can bedisplayed in tilingpatterns)50,000 hours (until contrast is reduced by 50%)Black/White(2 colors)1 to 255 minutes/None100 levels of adjustment possible using the fronttouch panel50,000 hours min. (See note.)3 levels of adjustment possible using the fronttouch panelLit while power is being suppliedLit during operationLit when the battery voltage is low (whenoperating)Lit when the battery voltage is low (whenstopped)Trend graphsBroken line graphsLampsImage library displaysTouch switchesNumeral inputsThumbwheel switchesCharacter string inputsAlarm listsAlarm historiesNormal screenOverlapping screensWindow screensDisplay history screensScreen attributesNumber of screensModelItemModelCharacter displays (fixed display)Graphic displaysCharacter string displaysNumerical displaysBar graph displaysAnalogue meterMax. number ofregistered screensScreen No.Screen registration methodScreen saving methodItemModelDisplay charactersEnlargement functionSmoothing processingOperation SpecificationsImage 192 (16 12)Pressure sensitive1 N max.1,000,000 operations min.Library dataGraphicsExternal I/F SpecificationsItemModelSerial port ASerialcommunicationsSerial port BParallel I/FExpansion I/FNT31-ST123(B)-EV3/NT31C-ST143(B)-EV3Conforms to EIA RS-232CD-sub 9-pin connector (female) 5 V (250 mA max.) output at pin No. 6EIA RS-232C (RS-422A/485 selectable bymemory switch setting)D-sub 25-pin connector (female)Conforms to Centronics specifications,20-pin half-pitch connectorDedicated connectorUp to 256 per screenUp to 256 per screenUp to 4 groups per screenThe normal screen displayA maximum of 8 registered screens can bedisplayed overlapped with each other.Up to 3 screens (2 local windows and 1 globalwindow) can be displayed at the same time.Order of occurrence (max. 1,024 screens), orderof frequency (max. 255 times)Buzzer, display history, background color,backlight, keyboard screen number0: No display1 to 3999: User-registered screens9000: "Initializing system" screen9001: Display history (occurrence order) screen9002: Display history (frequency order) screen9020: Programming Console function screen9999: Return to the previous screen9021 to 9023: Device monitorBy transmitting screen data created using theSupport Tool to the NT31/NT31CBy transmitting screen data stored in a memoryunit to the NT31/NT31C (automatic/manual)Flash memory (screen data memory in the PT)Display Element SpecificationsCharacter display attributeModelNumber ofswitchesInputOperating forceService lifeUp to 256 per screen (40 bytes (40 characters) per string)256 per screen, max. 10-digit display (2 words)Up to 50 per screen, percentage display and sign display are possible.Up to 50 per screen, percentage display and sign display are possible.One frame per screen, 50 graphs per frame(only 8 graphs per frame with data logging)One frame per screen, 256 graphs per frame,320 points per graphUp to 256 per screenUp to 256 per screenUp to 256 per screen, Max. overlap: 256 mesh3,999 screensNote: The time until brightness is reduced by half, under normaltemperature and normal 5,535 per screen (including marks)Line typeTillingGraphic display attributeDisplay colorsNT31-ST123(B)-EV3 NT31C-ST143(B)-EV3Half-size characters (8 8 dots): Alphanumerics and symbolsNormal-size characters (8 16 dots): Alphanumerics and symbolsMark data (16 16 dots): User defined picture charactersNormal size, double width, double height, andmagnifications of 4X, 9X, 16X, 64XAvailable for enlarged characters withmagnification of 4X or greater (excluding marks)Normal, reverse, flashing, reverse and flashing, transparentVariable-size pictographSize: Min. 8 8 dots, Max. 320 240 dotsThe size can be set in 8-dot units.It is not possible to set enlarged display,smoothing processing, or display attributes suchas reverse/flashing.Combination of any characters and graphicsSize: Min. 1 1 dots, Max. 320 240 dotsAny size can be set.Enlarged display, smoothing processing, anddisplay attributes such as reverse/flashing aredisplayed according to the setting registered.Polyline, circle, arc, fan, square, polygonSolid line, dotted line, alternate long and short dash, long andtwo short dashes (only polylines for other than solid lines)10 typesNormal, flashing, reverse, reverse flashing8 colors (black/blue/red/purple/2 colors (black/white)green/light blue/yellow/white)Data CapacitiesModelItemScreen data capacityNumeric memory tableNT31-ST123(B)-EV3/NT31C-ST143(B)-EV31 MB2 words x up to 2,000 (1,000 tables can be backed up with battery)40 normal-size characters x up to 2,000 (DataCharacter string memory tablecan be written to and read from 500 tables)Bit memory table1 bit 1,000Mark data224 (16-by-16-dot basis)Image data4,095 itemsLibrary data12,288 items4
NT SeriesSpecifications NT20NT20-ST121(B)/128(B)24 VDC20.4 to 27.6 VDC (24 VDC -15%/ 10%)Not specified10 W max.0 to 50 C (See note 1.) (with nocondensation)-20 to 70 C35% to 85 % (0 to 40 C)Ambient operating humidity35% to 50 % (40 to 50 C) (with no condensation)35% to 85 % (-20 to 40 C)Ambient storage humidity35% to 50 % (40 to 50 C)35% to 45 % (50 to 70 C) (with no condensation)Ambient operatingNo corrosive gasesenvironmentNoise immunityConforms to IEC 61000-4-4 at 2 kV (power supply line).5 to 9 Hz, single amplitude: 3.5 mmVibration resistance9 to 150 Hz, 9.8 m/s²(during operation)10 times (1 octave/min) each in X, Y, and Z directionsShock resistance (during operation) 147 m/s² , 3 times each in X, Y, and Z directionsDimensions190 108 53.5 mm (W H D)178.5 0.50 98.5 0.50 mm (horizontal vertical)Panel cutout dimensionsPanel thickness: 1.6 to 4.8 mmWeight0.7 kg max.Front panel operating section: Equivalent toDegree of protectionIP65 oil-proof type and NEMA 4. (See note 2.)Applicable standardsUL 1604 Class 1 Division 2, EC DirectivesNote 1: The display quality (e.g., contrast) will deteriorate attemperatures above 40 C. At low temperatures, the responsespeed will be reduced due to the characteristics of liquid crystal.2: The NT631/NT31/NT20 may not be able to be used inlocations subject to long-term oil exposure.Display/Panel SpecificationsItemSpecificationsDisplay deviceMonochrome STN LCD140 (128) 260 (256) dots (horizontal vertical)Number of dotsDot size: 0.42 mm(resolution)The number of dots that can be used in NT20system programs is indicated in parentheses.Display66 (57.6) 120 (115.2) mm (horizontal vertical)(SeeEffective displayThe effective display area that can be used withnote 1.)areaNT20 system programs is indicated in parentheses.Display modeBlue modeService life50,000 hours min.Contrast adjustment The contrast can be adjusted from the back of the PT.Service life50,000 hours min. (See note 2.)ReplacementCannot be replaced.BacklightBrightness adjustment Cannot be set.Automatic turn-OFF Can be set to either 10 minutes, 1 hour, or lit.FrontLit green: Normal operation with Memory Unitpanelautomatic transfer completed.RUNindicatorFlashing green: Executing Memory UnitLEDautomatic transfer or automatic transfer error.Note: 1: There are sometimes faulty in the touch panel, but this doesnot indicate an error as long as the number of bright or darkpixels does not exceed the following limits.4 total bright or dark defects m
NT31/C NT20 NT631C Note: NT31 and NT31C in this catalog have been discontinued at the end of March 2014. NT20 in this catalog have been discontinued at the end of September 2015. Model NT631C-ST153(B)-EV3 NT31C-ST143(B)-EV3 NT31-ST123(B)-EV3 NT20-ST121(B) Display TFT color display STN color display STN monochrome display STN monochrome display
TTL and CMOS logic 74 Series 74ls00 datasheet, 74ls02 datasheet, 74ls04 datasheet, 74ls08 datasheet, 74ls11 datasheet, 7414 datasheet, 74ls14 datasheet, 74ls20 datasheet, 74ls30 datasheet, 74ls32
Table 2. Wiring terminal references for non-Excel 10/12 devices signal T7460A terminal T7460B terminal T7460C terminal Excel 800 XF82x terminal (example) Excel 500 XF52xB terminal (example) Excel 500 XFL52x terminal (example) Excel 100 terminal (example) Excel 50 terminal (example) Excel 20 terminal (example) CPO-FB22344R terminal (example)
Programmable Terminal NP-Designer USER'S MANUAL. NP-series NP3-MQ000@ NP3-MQ001@ NP5-MQ000@ NP5-MQ001@ NP5-SQ000@ NP5-SQ001@ NP-NPDC0-V1 Programmable Terminal NP-Designer User's Manual Revised April 2009. iv. v Introduction Thank you for purchasing an NP-series Programmable Terminal.
APEX Virtual Terminal 3 Viewing Your Virtual Terminal in the Apex Portal To view your virtual terminal, select the Virtual Terminal menu option and select the My Terminal submenu. From the My Terminal page, you can process credit card and eCheck transactions for your customers. NOTE: My Terminal is a standard terminal that currently .
15 Heat Pump 0.13 White Rogers Non-programmable N/A Nest 10/10/14 16 Resistance 0.07 Carrier Programmable Running Nest 7/29/15a 17 Heat Pump 0.12 Trane (XT500C) Programmable 'Hold' Nest 9/10/14 18 Heat Pump 0.05 Honeywell Programmable 'Hold' Nest 9/11/14 21 Heat Pump 0.12 White Rogers Programmable Program Running
point terminal dundalk marine terminal fairfield auto terminal masonville marine terminal motiva terminal csxt coal pier seagirt marine terminal south locust point terminal tradepoint atlantic 10.4 milliion tons of general cargo were processed in 2020 1st among the nation’s ports for vo
web: www.aeroflex-weinschel.com email: sales@aeroflex-weinschel.com Revision Date: 3-1-07 Programmable Attenuators Programmable Attenuator Units for Rack or Bench Use: (Pages 125-128) Aeroflex / Weinschel's 8310 & 8311 Series Programmable Attenuator Units represent Aeroflex / Weinschel's newest concept in programmable attenuation for bench test and
001 96819 Owner: JFMD Introduction to PSoC 4 Customer Training Workshop with PSoC 4 M- Series 5 Rev ** Tech lead: PMAD PSoC Terms PSoC PSoC is the world's only programmable embedded system-on-chip integrating an MCU core, Programmable Analog Blocks, Programmable Digital Blocks, Programmable Interconnect and Routing1 and CapSense Programmable Analog Block
