INDEX OF SERVICE BULLETINS, LETTERS AND . - Lycoming
Service BulletinsLetters and InstructionsINDEXSSP-112-11December 2020652 Oliver StreetWilliamsport, PA 17701 U.S.A.Phone:Main Office U.S. and Canada Toll FreeDirectSales DepartmentFacsimileVisit us on the World Wide Web at: Lycoming.com 2020 Avco Corporation. All Rights Reserved. 1 (800) 258-3279 1 (570) 323-6181 1 (570) 327-7278 1 (570) 327-7101
Service Bulletins, Letters, and Instructions IndexLycoming Part Number: SSP-112-11 2020 Lycoming. All rights reserved.Lycoming and “Powered by Lycoming” are trademarks or registered trademarks of Lycoming.All brand and product names referenced in this publication are trademarks or registered trademarks of their respective companies.For additional information:Mailing address:Lycoming Engines652 Oliver StreetWilliamsport, PA 17701 U.S.A.Phone:Factory:Sales Department:Fax:U.S. and Canada toll free - 1(800) 258-3279International Customers - 1(570) 323-6181 1(570) 327-7278 1(570) 327-7101Lycoming’s regular business hours are Monday through Friday from 8:00 A.M. through 5:00 P.M. Eastern Time (-5 GMT)Visit us on the World Wide Web at: Lycoming.com
Index of Service Bulletins, Letters, and InstructionsAlphabetical Index . 2Active Publications (Numerical Listing) . 43Engine Application Index . 44List of Supersedures . 67Inactive Publications . 69NOTEIn addition to the operator’s manuals, installation and operation manuals, service manuals, maintenance manuals,overhaul manuals, and parts catalogs that are published to maintain and operate the various models of Lycoming enginesin airworthy condition; bulletins, letters, and instructions are issued as required to inform all concerned of new policies,products, modifications, and maintenance information applicable to the support of Lycoming aircraft engines. ServiceLetters are issued to explain service policies and introduce new products or processes approved for Lycoming engines.Service Instructions describe modifications, processes, and other information pertinent to the maintenance, repair, andoverhaul of Lycoming engines. Service Bulletins (published since April 1960) describe mandatory procedures that must beobserved for safety reasons.Subscription services for Complete Sets of Active Service Bulletins, Letters, and Instructions are available from anauthorized Lycoming publications distributor. A listing of authorized Lycoming publications distributors can be found inthe latest revision of Service Letter No. L114.Lycoming recommends that owners of this index sign up for email notification on the Technical Publications page of ourwebsite Lycoming Technical Publications. By submitting your email address, you will receive notification wheneverLycoming publishes a new or revised Service Bulletin, Letter, or Instruction.1
Alphabetical Listing of LycomingService Bulletins, Letters, and Instructions* - Lycoming Service Document referenced in Airworthiness Directives.Pub. No.S.I. 1110CS.I. 1212S.L. L271S.I. 1351S.I. 1503S.I. 1203S.I. 1145S.I. 1171S.I. 1394S.B. 247S.I. 1203S.I. 1295S.B. 411DS.I. 1436AS.I. 1510AS.I. 1368S.I. 1329AS.I. 1158S.B. 466S.L. L218S.L. L190S.L. L172CS.L. L226S.B. 471BS.B. 446E*S.I. 1409CS.I. 1559S.L. L154BS.B. 465C*S.B. 403S.L. L208S.I. 1570S.L. L202BS.B. 509S.I. 1464S.B. 598AS.I. 1002S.I. 1396S.B. 417AS.B. 538AS.B. 401AS.B. 361S.B. 347S.B. 329AS.B. 383S.B. 379S.B. 391AS.B. 440S.B. 450TitleAC Fuel Pumps, ReplacementAccelerator Pump, Marvel-Schebler Carburetors with – O-235-C SeriesAccess Lycoming Digital Technical Publications, How toAccessory Drive Gear and Drive ShaftAccessory Drive Gear and Shaft Dowel ReplacementAccessory Drive Shaft Adapter Assy., Installation of ImprovedAccessory Drive Shaft, Modification to Incorporate Larger Spline DriveAccessory Housing and Covers, Salvage ofAccessory Housing Assy. and Housing Cover Assy. Modification to Retrofit Hollow Oil Transfer DowelAccessory Housing, Modification of Oil Metering PlugAdapter Assy., Accessory Drive Shaft, Installation of ApprovedAdapter Bearing, Oversize SuperchargerAdapter Kit for Magneto Isolation DriveAdapter Kit for Magneto Isolation DriveAdapter Kit for Magneto Isolation DriveAdapter Seal Washer and Retainer, TachometerAdapter Seals, Supercharger InletAdapter, Magneto Drive, ReplacementAdapter, Oil Filter Base, InspectionAdapters, Fuel PumpAdditive, Fuel, Use of “TCP”Additive, Fuel, Use of Ethylene Glycol Monomethyl Ether (EGME) such as “Prist” and Diethylene GlycolMonomethyl Ether (DIEGME or DEGMME)Additive, Oil P/N LW-16702, DiscolorationAdditive, Oil, Use of Textron Lycoming LW-16702Additive, Oil, Use of Textron Lycoming LW-16702 (A.D. #80-04-03)Additive, Oil, Use of Textron Lycoming LW-16702Adjusting Fuel Pressure on AN-Drive Type Fuel PumpsAdjustment Consideration for Returned and/or Run-Out EnginesAerobatic Engine Crankshaft Flange Inspection (A.D. #84-13-05)Aerobatic Engine Lubricating RequirementsAerobatic Engines, Breather OptionsAerobatic Inverted Oil System, Alternate Oil Sump Fitting Configuration forAerobatic Maneuvers, Engines Installed in Aircraft Used for, All 320, 360, and 540 Series UsingCrankshafts with Lightning HolesAeroquipS.B. AA135, “601 Hose Assemblies”AeroquipS.B. AA91, “Hose Line Problems”Aeroquip (P/N NH1008723-10 and MVT69183-225, V-Band Clamp P/N LW-12125-3 and LW-12093-6on Turbocharged EnginesAir Filters, Carburetor, Proper MaintenanceAir Housing, Induction, RedesignedAir Inlet HousingAir Inlet Tube ReplacementAfter a Lightning Strike, Recommended GuidanceAiResearch Bulletin No. 1172-1A, “Turbocharger Modification”AiResearch Bulletin No. 571-1, “Turbine Housing Inspection & Replacement”AiResearch Bulletin No. TP60-0100, “Turbine Housing Inspection”AiResearch Bulletin No. TP60-0101, “Inspection of Model T1823 Turbocharger with Stainless SteelTurbine Housings”AiResearch Bulletin No. TP60-0103, “Inspection of Remanufactured Waste Gate Valve Assy.”AiResearch Bulletin No. TP60-0105, “Turbocharger Repl. Or Mod. (Refer to Supplement No. 1 to S.B.391A)AiResearch Bulletin No. TP60-0115, “Spring Pin Replacement – Variable Absolute Pressure Controllers”AiResearch Bulletin No. TP60-0119, “Bypass Valve Modification”2
Alphabetical Listing of LycomingService Bulletins, Letters, and Instructions* - Lycoming Service Document referenced in Airworthiness Directives.Pub. No.S.B. 452AS.I. 1223S.I. 1328S.I. 1416S.L. L231S.B. 484*S.B. 213AS.I. 1570S.L. L142BS.B. 386S.I. 1254S.B. 536S.I. 1129DS.B. 511S.I. 1531S.B. 356S.I. 1283AS.L. L277S.I. 1330AS.B. 625S.I. 1266S.B. 623S.I. 1270AS.I. 1249S.I. 1259S.I. 1515S.I. 1253S.I. 1237AS.I. 1451AS.I. 1105BS.I. 1154WS.B. 524*S.L. L235AS.I. 1559S.L. L147BS.I. 1543S.L. L255AS.I. 1532LS.I. 1549S.I. 1443RS.L. L237S.I. 1454AS.I. 1210B*S.I. 1196S.I. 1508CS.L. L282S.B. 626AS.B. 596S.L. L253CS.I. 1076S.B. 625TitleAiResearch Bulletin No. TP60-0121, “Turbo Inspection”AiResearch Instruction No. 969-1, “Freeing Turbine Shaft”AiResearch Letter No. TP61-0002, “Turbocharger Replacement”AiResearch Letter No. TP61-0039, “Turbocharger Bypass Valve Modification”AiResearch Turbo Control Test Set P/N 481070-1, Variable Absolute Pressure Controller CalibrationValuesAlignment, Inspection and Modification of Crossover Exhaust Assembly (A.D. #89-12-04)Allen Head Nuts (Cylinder Base), Replacing Cylinder Base Spline Nuts withAlternate Oil Sump Fitting Configuration for Aerobatic Inverted Oil SystemAlterations, Policy Relative to Affecting Engine PerformanceAlternator Bearing Lubrication – TIGO-541-EAlternator Belt ReplacementAlternator Belt TensionAlternator Belt Tension, Methods of CheckingAlternator Bracket InstallationAlternator Bracket for Engines Equipped with Kelly Aerospace E-drive StartersAlternator Bracket Support, Addition of – TIO-540-A2CAlternator Cog Belt and Pulley InstallationAlternator Distribution Agreement, Hartzell Engine Technologies and Lycoming EnginesAlternator Drive Coupling, Spring Loaded – TIGO-541-EAlternator Fan BackplateAlternator Ground Strap – All Engines with PrestoliteAlternator, Hartzell (HET) Service Bulletin SB-062 P/N LW-14326 or LW-14338, ReprintAlternator Mounting Bracket ShimsAlternator Pulley and Shaft Assy.Alternator Replacement – VO-435-B1AAlternator, Kelly Aerospace Power Systems Service Information Letter No. A-115, “RecommendedService/ Inspection for Alternator Series ALE, ALU, ALY, ALX”Alternator, Prestolite Bulletin No. ASM-5, “Field Terminal Stud Insulation Replacement”Alternator, Prestolite Bulletins No. ASM-3 & ASM-4, “Aircraft Charging System Service Precautions”Alternator, Starter and Compressor InstallationAlternator/Generator Mounting Brackets, Periodic InspectionAlternators and Starters, FAA ApprovedAluminum and Sintered Iron Oil Pump Impellers, Replacement (Refer to Supplement No. 1 to S.B. 524)(A.D. #96-09-10)Aluminum Hub Propeller, Hartzell Compact, Installation on Comanche 250 AircraftAN-Drive Type Fuel Pumps, Adjusting Fuel Pressure onAnderol 471 All-Climate Synthetic Aircraft LubricantApprove Tappet P/N 15B26262, NotificationApproved Diaphragm-Type Fuel PumpsApproved Fuel Injectors, Fuel Manifold Assemblies, and Fuel Nozzle AssembliesApproved Fuel Pump Plunger P/N 23D26777, Notification ofApproved Slick Magnetos and Electronic Ignition System (EIS) on Lycoming EnginesArea Code, Telephone, Change, Textron Lycoming, Williamsport, PAArm, Rocker, Assembly Replacement Part (Refer to Supplement No. 1 to S.B. 1454A)Attaching Nut Replacement, Pinion Cage (A.D. #69-25-08)Attaching Studs, Replacement of Reduction GearAttachment, MagnetoAustralian Fuel TestingAVStar Flow Divider (Lycoming Fuel Manifold) InspectionAVStar Fuel Servo, Mandatory S.B. AFS-SB6AVStar Fuel System Warranty Repair ofBacklash, Bevel Gear Assemblies, Pitch Alignment andBackplate, Alternator Fan3
Alphabetical Listing of LycomingService Bulletins, Letters, and Instructions* - Lycoming Service Document referenced in Airworthiness Directives.Pub. No.S.B. 613S.B. 579S.I. 1279DS.B. 489AS.I. 1363S.I. 1292AS.I. 1377S.B. 326A*S.I. 1225DS.I. 1250S.I. 1177BS.B. 547*S.B. 561*S.I. 1020BS.B. 544BS.I. 1312S.I. 1149S.I. 1108CS.I. 1512S.B. 386S.B. 327C*S.I. 1295S.I. 1356S.B. 390AS.B. 276S.B. 371B*S.I. 1432AS.I. 1283AS.B. 536S.I. 1129DS.I. 1254S.I. 1252CS.B. 516AS.I. 1276S.I. 1365S.I. 1375S.B. 305B*S.I. 1166AS.I. 1244S.I. 1247S.B. 382*S.B. 428*S.B. 429*S.B. 430*S.B. 433A*S.B. 444A*S.B. 445TitleBackplate Assembly P/N 407895-0058, Turbocharger, Hartzell Alert Service Bulletin No. 057Baffle, Oil Sump and Oil Sump Assembly, Clearance BetweenBaffle, Replacement, Oil SumpBaffle Assembly, P/N LW-13383, Oil SumpBall Joint and Retaining Strap, Exhaust ManifoldBearing and Lubrication Modifications, Stainless Steel ThrustBearing Bore Repair, Crankcase Main, and Oversize Main Bearings(Refer to Supplement No. 1 to S.I. 1377)Bearing Dowel Replacement (A.D. #’s 71-05-02 & 72-21-06)Bearing Dowel, Crankcase, ReplacementBearing Lubrication, Propeller ShaftBearing Repair, Governor Drive, in CrankcaseBearing Replacement, Connecting Rod on TIO-540-AE2A Model Engines (Refer to Supplement No. 1 toS.B. 547)Bearing Replacement, Connecting Rod on (L)TIO-540-U2A, -V2AD, and –W2A EnginesBearing Replacement, Crankshaft MainBearing Replacement, Part IdentificationBearing Replacement, Propeller Drive Thrust (Crankcase P/N LW-13082)Bearing Support Web, Crankcase, Inspection & ModificationBearing Surfaces, Propeller Shaft, Repair (Refer to Supplement No. 1 to S.I. 1108C)Bearing Upgrade, Main and Connecting Rod ( Also Reference Supplement No. 1 to S.I. 1512)Bearing, Alternator, LocationBearing, Inspection of Center Main (A.D. #’s 71-05-02 & 72-21-06)Bearing, Oversize Supercharger AdapterBearing, Oversize Thrust, for Reduction GearBearing, Propeller Thrust (LW-12978) InspectionBearing, Replacement of Front Main at OverhaulBearings, High-Crush, New Rod Kits (A.D. #73-05-01)Bearings, Installation of High-Crush, Thin-Wall Rear Main in Crankcases without Retention DowelsBelt and Pulley, Alternator Cog, InstallationBelt Tension, AlternatorBelt Tension, Alternator, Method of CheckingBelt, Alternator, ReplacementBendix 1200 Series Magneto InstallationBendix and TCM S-20 and S-1200 Series Impulse Coupling Magnetos, Inspection and RemovalBendix Electrical Components Bulletin No. 529A, “Torque Values for Drive Shaft Nut”Bendix Electrical Components Bulletin No. 597, “Cleaning Ignition Harness Spark Plug Ends”Bendix Electrical Components Bulletin No. 603, “Ignition Noise in Aircraft Communications Equipment”Bendix Fuel Injector Bulletin No. 18, Rev. 4, “Replacement of Bendix Fuel Diaphragm Assy. (A.D. #6722-06)Bendix Fuel Injector Bulletin No. 20, Rev. 2, “Identifying Fuel to Air Seal Leak”Bendix Fuel Injector Bulletin No. RS-35, “Changes – Regulator and Fuel Control System”Bendix Fuel Injector Bulletin No. RS-37, “Replacement of Idle Valve Lever Assy.”Bendix Fuel Injector Bulletin No. RS-43, “Inspection & Modification of Flow Dividers” (A.D. #75-09-15)Bendix Fuel Injector Bulletin No. RS-52, “Mod. Of RSA-5AB1, RSA-5AD1 & RSA-10AD1” (Refer toSupplement No. 1 to S.B. 428) (A.D. #78-23-10)Bendix Fuel Injector Bulletin No. RS-53, “Modification of RSA-7AA1” (A.D. #78-23-10)Bendix Fuel Injector Bulletin No. RS-54, “Modification of RSA-10DB1, RSA-10DB2 & RSA-10ED1”(Refer to Supplement No. 1 to S.B. 430) (A.D. #78-23-10)Bendix Fuel Injector Bulletin No. RS-57, Rev. 1, “Inspection of Fuel Diaphragm Assy. P/N 2529471”(A.D. #79-04-05)Bendix Fuel Injector Bulletin No. RS-62, Rev. 2, “Modification of Mixture Control Shaft Assy.” (A.D.#81-03-05)Bendix Fuel Injector Bulletin No. RS-63, “Inspection of Fuel Diaphragm Assy.”4
Alphabetical Listing of LycomingService Bulletins, Letters, and Instructions* - Lycoming Service Document referenced in Airworthiness Directives.Pub. No.S.B. 441S.B. 442*S.B. 443*S.I. 1414BS.B. 467*S.I. 1378S.I. 1404AS.I. 1335S.B. 340S.I. 1260S.I. 1226S.B. 341S.B. 343BS.B. 376*S.I. 1282S.B. 373S.I. 1332S.I. 1327S.B. 416A*S.B. 410*S.I. 1367S.B. 414*S.B. 415A*S.I. 1382S.B. 427AS.B. 438A*S.B. 437*S.I. 1400S.B. 458S.B. 461S.B. 459*S.B. 460S.B. 464A*S.L. L207S.I. 1433S.B. 469S.B. 470S.B. 474S.B. 365S.I. 1346AS.L. L188S.L. L196S.I. 1352AS.I. 1307BTitleBendix Fuel Injector Bulletin No. RS-66, “Modification of Idle Valve Assy.”Bendix Fuel Injector Bulletin No. RS-68, “Integrity Inspection of Regulator Stem Nut” (Refer toSupplement No. 1 to S.B. 442) (A.D. #’s 79-21-08 & 79-26-03)Bendix Fuel Injector Bulletin No. RS-69, “Integrity Inspection of Regulator Stem Nut” (A.D. #79-21-08)Bendix Fuel Injector Bulletin No. RS-77, Rev. 1, “Air Bleed Nozzle, RS & RSA Fuel Injection Systems,Two Piece Assembly”Bendix Fuel Injector Bulletin No. RS-88, “Deter. Of Fuel Diaphragm Change” (Refer to Supplement No. 1& No. 2 to S.B. 467) (A.D. #83-22-04)Bendix Fuel Injector Bulletin No. SSB-317, “Overheating Bendix Fuel Injectors & Carburetors”Bendix Fuel Injector Bulletin No. SSB-318, “Overhaul Periods for Bendix Fuel System Components”Bendix Fuel Injector Letter No. 22, “Mixture Control Maintenance”Bendix Magneto Bulletin No. 530A, “Securing Coil Clamp”Bendix Magneto Bulletin No. 533A, “Acceptable Stress Relief Fissures, Flow Lines & Cracks”Bendix Magneto Bulletin No. 545, “Tubing for S-1200 Cover Hold Down Screw”Bendix Magneto Bulletin No. 549, “Locating Shoulder for Carbon Brush Spring”Bendix Magneto Bulletin No. 551A, “New Distributor Block Lubricant”Bendix Magneto Bulletin No. 556B, “Magneto Drive Shaft Bushing Change” (A.D. #74-26-09)Bendix Magneto Bulletin No. 560, “Replacement of Transformer Coils & Rotating Magnets”Bendix Magneto Bulletin No. 566, “S-1200 Distributor Block & Gear Change” (Refer to Supplement No.1 to S.B. 373)Bendix Magneto Bulletin No. 573, “Green Distributor Blocks”Bendix Magneto Bulletin No. 580, “Breaker Securing Screws”Bendix Magneto Bulletin No. 584B, “Coil Retaining Devices, D2000/D2200 Mags” (A.D. #78-18-04)Bendix Magneto Bulletin No. 587, “Inspection D2000 Carburetor & Lead Crimp Terminals” (A.D. #7818-04)Bendix Magneto Bulletin No. 588, “Stress Lines in Distributor Blocks”Bendix Magneto Bulletin No. 589, “Rear Bearing Lubrication, D2000/D2200 Mags.”(A.D. #77-17-07 references Bendix Magneto Bulletin No. 589)Bendix Magneto Bulletin No. 590A, “Rotating Magnet to Housing Clearance, D2000/D2200 Mags.” (A.D.#78-18-04)Bendix Magneto Bulletin No. 592, “Inspection of Breaker Contact Assys. & Capacitor Flag TerminalCrimps”Bendix Magneto Bulletin No. 600, “10-353110 Bearing in D2000/D2200 Mags.”Bendix Magneto Bulletin No. 605A, “Housing Distortion & Coil Retention” (A.D. #80-17-14)Bendix Magneto Bulletin No. 606, “D2000/D2200 Mags. Using Green Distributor Blocks” (A.D. #79-1207)Bendix Magneto Bulletin No. 608, “Self-Locking Cam Retaining Screws”Bendix Magneto Bulletin No. 613, “Inspection and/or Replacement of Green Distributor Blocks”Bendix Magneto Bulletin No. 617, “Inspection or Replacement of Distributor Gears”Bendix Magneto Bulletin No. 618, “Inspection or Replacement of Distributor Gears” (A.D. #81-12-06)Bendix Magneto Bulletin No. 619, “Inspection or Replacement of Distributor Gears”Bendix Magneto Bulletin No. 623A, “Inspection of Impulse Coupling Cam Assys.” (A.D. #82-20-01)Bendix Magneto Bulletin No. 625, “Broken Coil Securing Clamps, P/N 10-50765”Bendix Magneto Bulletin No. 626, “Installation of Impulse Coupling Assemblies”Bendix Magneto Bulletin No. 627, “Distributor Block Kit P/N 10-682056 (6 cyl.) Dual Magneto Series”Bendix Magneto Bulletin No. 628, “Replacement of Impulse Coupling Main Spring P/N 10-382941”Bendix Magneto Bulletin No. 629, “Insp. & Repl. Of Brown Mag. Blocks on Turbocharged (6 cyl.)Engines”Bendix Magneto Conversion to Incorporate Flexible DriveBendix S4LN-1208 Magnetos, Installation ofBlack Oxide Finish, Cylinders Treated withBlade, Screwdriver, ST-418-3, Revision toBody Disassembly, Hydraulic LifterBolt Assembly, Connecting Rod, and Torque Application5
Alphabetical Listing of LycomingService Bulletins, Letters, and Instructions* - Lycoming Service Document referenced in Airworthiness Directives.Pub. No.S.I. 1209B*S.I. 1459S.B. 554*S.I. 1170S.B. 372BS.I. 1469S.I. 1213S.B. 363S.I. 1458GS.I. 1029DS.I. 1248BS.I. 1380*S.B. 491A*S.B. 371B*S.I. 1323AS.B. 590AS.I. 1417S.I. 1377S.I. 1334AS.I. 1315AS.I. 1248BS.I. 1380*S.I. 1306AS.B. 356S.I. 1531S.B. 511S.I. 1270AS.I. 1339AS.B. 463S.I. 1105BS.I. 1397AS.L. L208S.I. 1366AS. B. 630AAS.I. 1098QS.I. 1143CS.I. 1044S.I. 1386AS.I. 1575S.I. 1142BS.B. 632B*S.I. 1208S.I. 1452S.B. 253AS.I. 1316AS.I. 1214AS.I. 1442AS.I. 1565AS.I. 1423AS.I. 1255AS.B. 518DTitleBolt Replacement, Crankshaft Flange (A.D. #80-04-04)Bolt Threads, Application of SealantBolt, Crankshaft Gear Retaining, Replacement (A.D. #99-03-05) (Refer to Supplement No. 3, No. 4 (A.D.#2002-23-06), and No. 5 to S.B. 554)Bolt, Generator Mounting, ReplacementBolt, T, High-Tensile Clamping BandsBolts, Connecting Rod with High-Tensile StrengthBolts, Connecting Rod, Increased Torque ValueBolts, Connecting Rod, Part Number Listing PC-206: IO-360 Series EnginesBolts, Connecting Rod (Identification and Installation)Bolts, Crankcase, Tightening Procedures for Thru-Studs and (Refer to Supplement No. 1 and No. 2 to S.I.1029D)Bolts, Engine Mounting Bracket AttachingBolts, Engine Mounting Bracket Attaching Nuts or (A.D. #79-10-03)Bolts, Ex
Alphabetical Listing of Lycoming Service Bulletins, Letters, and Instructions * - Lycoming Service Document referenced in Airworthiness Directives. Pub. No. Title S.B. 452A AiResearch Bulletin No. TP60-0121, “Turbo Inspection” S.I. 1223 AiResearch Instruction No. 969-1, “Freeing Turbine Shaft”
of Lycoming engines. Service Bulletins (published since April 1960) describe mandatory procedures that must be observed for safety reasons, and readily identified by the mandatory heading printed in red. Service Bulletins, Letters and Instructions are available to all from authorized Lycoming distributors, or from the
Abbreviations xxix PC Carli price index PCSWD Carruthers, Sellwood, Ward, and Dalén price index PD Dutot price index PDR Drobisch index PF Fisher price index PGL Geometric Laspeyres price index PGP Geometric Paasche price index PH Harmonic average of price relatives PIT Implicit Törnqvist price index PJ Jevons price index PJW Geometric Laspeyres price index (weighted Jevons index)
Service Bulletins Issued after 1994 9.4 02/15/23 108747-10 CF6-80A1/A3 Airbus Version Engine Manual GEK 72501 - R91 Illustrated Parts Catalog GEK 72507-1 - R75 Service Bulletins Issued after 1994 Ver.9.4 02/15/23 108748 CF6-80E1 Engine Manual GEK 99376 - R51 Illustrated Parts Catalog GEK 99378 -R64 Service Bulletins Issued after 1994
d. Dido and Aeneas fell in (4 letters) g. African princess (4 letters) h. Romans built a huge (6 letters) DOWN 1. Where Aeneas was born (4 letters) 2. Enemy town of Rome (8 letters) 6. They destroyed Troy (6 letters) 7. The land (in Italian) Aeneas finally arrived to (5 letters) 8. Capital of the world (4 letters) Activity 3 Read one of .
S&P BARRA Value Index RU.S.sell Indices: RU.S.sell 1000 Growth Index RU.S.sell 2000 Index RU.S.sell LEAP Set RU.S.sell 3000 Value Index S&P/TSX Composite Index S&P/TSX Venture Composite Index S&P/TSX 60 Canadian Energy TrU.S.t Index S&P/TSX Capped Telecommunications Index Sector-based Indices: Airline Index Bank Index
Parts Technical Manual Freightliner LLC publishes this manual to aid in the identification of serviceable replacement vehicle parts. This manual is used in conjunction with the parts book and the service parts catalog microfiche. Service Bulletins Service Bulletins provide the latest service tips, field repairs, product improve-ments, and related information. Some service bulletins are .
Service Manual Form X40000 Alternator Service Instructions Form X30531-3 Starter Service Instructions Form X30592 Bulletins that are issued to Distributors and subscribers from Teledyne Contiental Motors are divided into three separate groups: (1) Customer Information Bulletins; (2) Service Bulletin and (3) Mandatory Service Bulletins.
The external evaluation of the National Plan on Drugs and Drug Addiction 2005-2012 is taking place now and the final report will be presented in December 2012, which will include recommendations for the next policy cycle. The final report of the internal evaluation of both Plans (Drugs and Alcohol) will be presented by the end of 2012 for approval of the Inter-ministerial Council. Drug use in .
