ASME BPVC.II.A-2015 - Nimaazmoon

2y ago
191 Views
21 Downloads
7.78 MB
852 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Luis Waller
Transcription

ASME Boiler andPressure Vessel CodeAn International Code2015MATERI ALSFer rou s M aterial Sp eci fi cat i o ns(Beg in n in g to SA -4 50)This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SECTION IIPa r t ACopyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).ASME B PVC.I I .A-2015No fu

2015 ASME Boiler &Pressure Vessel Code2015 EditionJuly 1, 2015IIPart AFerrous MaterialSpecifications(Beginning to SA-450)ASME Boiler and Pressure Vessel Committeeon MaterialsTwo Park Avenue New York, NY 10016 USAThis copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.MATERIALSCopyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).AN INTERNATIONAL CODENo fu

This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard. The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, andthe public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with anyitems mentioned in this document, and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard areexpressly advised that determination of the validity of any such patent rights, and the risk of infringement of suchrights, is entirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted asgovernment or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document (if any) are part of this American National Standard.ASME collective membership markCertification Mark“ASME” is the trademark of The American Society of Mechanical Engineers.The Specifications published and copyrighted by the American Society for Testing and Materialsare reproduced with the Society’s permission.No part of this document may be reproduced in any form, in an electronicretrieval system or otherwise, without the prior written permission of thepublisher.Library of Congress Catalog Card Number: 56-3934Printed in the United States of AmericaAdopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015.The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990Copyright 2015 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERSAll rights reservedThis copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.The above ASME symbol is registered in the U.S. Patent Office.Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).Date of Issuance: July 1, 2015No fu

291295299303307This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising . . . . . . . . . .Statement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . .Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . .Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ASTM Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specifications Listed by Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .List of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . .SA-6/SA-6MSpecification for General Requirements for Rolled Structural Steel Bars,Plates, Shapes, and Sheet Piling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-20/SA-20MSpecification for General Requirements for Steel Plates for Pressure VesselsSA-29/SA-29MSpecification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-31Specification for Steel Rivets and Bars for Rivets, Pressure Vessels . . . . . . .SA-36/SA-36MSpecification for Carbon Structural Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-47/SA-47MSpecification for Ferritic Malleable Iron Castings . . . . . . . . . . . . . . . . . . . . . .SA-53/SA-53MSpecification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded andSeamless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-105/SA-105MSpecification for Carbon Steel Forgings, for Piping Applications . . . . . . . . . .SA-106/SA-106MSpecification for Seamless Carbon Steel Pipe for High-Temperature ServiceSA-134Specification for Pipe, Steel, Electric-Fusion (ARC)-Welded (Sizes NPS 16 andOver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-135Specification for Electric-Resistance-Welded Steel Pipe . . . . . . . . . . . . . . . . .SA-178/SA-178MSpecification for Electric-Resistance-Welded Carbon Steel and CarbonManganese Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . .SA-179/SA-179MSpecification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-181/SA-181MSpecification for Carbon Steel Forgings, for General-Purpose Piping . . . . . .SA-182/SA-182MSpecification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges,Forged Fittings, and Valves and Parts for High-Temperature Service . . .SA-192/SA-192MSpecification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-193/SA-193MSpecification for Alloy-Steel and Stainless Steel Bolting for High-Temperatureor High Pressure Service and Other Special Purpose Applications . . . . . .SA-194/SA-194MSpecification for Carbon and Alloy Steel Nuts for Bolts for High Pressure orHigh Temperature Service, or Both . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-202/SA-202MSpecification for Pressure Vessel Plates, Alloy Steel, Chromium-ManganeseSilicon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-203/SA-203MSpecification for Pressure Vessel Plates, Alloy Steel, Nickel . . . . . . . . . . . . .SA-204/SA-204MSpecification for Pressure Vessel Plates, Alloy Steel, Molybdenum . . . . . . . .SA-209/SA-209MSpecification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SA-210/SA-210MSpecification for Seamless Medium-Carbon Steel Boiler and SuperheaterTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).TABLE OF CONTENTSNo fu

93501511523535551561573This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-283/SA-283MSA-285/SA-285MSpecification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchangerand Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Carbon, Suitable for Fusion Welding forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings, Martensitic Stainless and Alloy, forPressure-Containing Parts, Suitable for High-Temperature Service . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-VanadiumNickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Spring Wire . . . . . . . . . .Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality WireSpecification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forModerate and High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet,and Strip for Pressure Vessels and for General Applications . . . . . . . . . . .Specification for Welded Austenitic Steel Boiler, Superheater,Heat-Exchanger, and Condenser Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium Steel-Clad Plate . . . . . . . . . . . . . . . . . .Specification for Stainless Chromium-Nickel Steel-Clad Plate . . . . . . . . . . . .Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate . . . . . . . . . .Specification for Carbon Steel Forgings for Pressure Vessel Components . .Specification for Seamless and Welded Ferritic and Martensitic Stainless SteelTubing for General Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Stainless Steel Bars and Shapes . . . . . . . . . . . . . . . . . . . . . .Specification for Gray Iron Castings for Pressure Containing Parts for Temperatures up to 650 F (350 C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Low and Intermediate Tensile Strength Carbon Steel PlatesSpecification for Pressure Vessel Plates, Carbon Steel, Low- andIntermediate-Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon .Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenumand Manganese-Molybdenum-Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile StrengthSpecification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject toMechanical Property Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless, Welded, and Heavily Cold Worked AusteniticStainless Steel Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy-Steel and Stainless Steel Bolting for Low-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi MinimumTensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Steel Pipe for Low-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Welded Carbon and Alloy-Steel Tubes forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Ferritic Alloy-Steel Pipe for High-TemperatureService . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Alloy Steel Forgings for Pressure and High-TemperatureParts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Carbon and Low-Alloy Steel Forgings, Requiring NotchToughness Testing for Piping Components . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), forPressure-Containing Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Copyrighted material licensed to University of Toronto by Thomson Scientific, Inc. (www.techstreet.com).SA-213/SA-213MNo fu

13817825835863877883895921This copy downloaded on 2015-07-13 07:12:01 -0500 by authorized user logan ahlstrom.SA-449Specification for Steel Castings, Ferritic and Martensitic, for PressureContaining Parts, Suitable for Low-Temperature Service . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized andTempered 9% Nickel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and OtherExternally Threaded Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications .Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe forHigh-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Test Methods and Definitions for Mechanical Testing of Steel Products . . .Specification for Carbon and Alloy Steel Forgings for Thin-Walled PressureVessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless Austenitic Steel Pipe for High-TemperatureCentral-Station Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Alloy Steel, ChromiumMolybdenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use atElevated Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Wrought Austenitic Stainless Steel Piping Fittings . . . . . . .Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosiveor High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel, Sheet, Carbon, for Pressure Vessels . . . . . . . . . . . . . .Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel forLow-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes . . . .Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Straight-Beam Ultrasonic Examination of Steel Plates . . . .Specification for Stainless and Alloy-Steel Turbine-Type Bolting SpeciallyHeat Treated for High-Temperature Service . . . . . . . . . . . . . . . . . . . . . . . .Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated,120/105/90 ksi Minimum Tensile Strength, General Use . . . . . . . . . . . . .Specification for General Requirements for Carbon and Low Alloy SteelTubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Centrifugally Cast Austenitic Steel Pipe for HighTemperature Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for High-Temperature Bolting, With Expansion CoefficientsComparable to Austenitic Stainless Steels . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Ductile Iron Castings for Paper Mill Dryer Rolls . . . . . . . .Specification for Stainless Steel Bars and Shapes for Use in Boilers and OtherPressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for General Requirements for Flat-Rolled Stainless andHeat-Resisting Steel Plate, Sheet, and Strip . . . . . . . . . . . . . . . . . . . . . . . . .Specification for General Requirements for Stainless Steel Bars, Billets, andForgings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Steel Castings Suitable for Pressure Service . . . . . . . . . . . .Specification for Quenched and Tempered Vacuum-Treated Carbon and AlloySteel Forgings for Pressure Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- andHighe

II MATERIALS Part A Ferrous Material Specifications (Beginning to SA-450) ASME Boiler and Pressure Vessel Committee on Materials AN INTERNATIONAL CODE 2015 ASME Boiler & Pressure Vessel Code 2015 Edition July 1, 2015 Two Park Avenue † New York, NY † 10016 USA

Related Documents:

(g) the following sections of ASME-BPVC-Boiler and Pressure Vessel Code: (i) BPVC-I-2015-Rules for Construction of Power Boilers, (H) BPVC-IIA-2015-Ferrous Materials Specifications, (Hi) BPVC-IIB-2015-Nonferrous Material Specifications, (iv) BPVC-IIC-2015-Specifications for encad

Hence the method is formulated for manual design of obround flange which can use ASME BPVC section VIII div.-1. Guidelines of the ASME BPVC Section VIII div.-2 are to be used with the allowable stress limits of ASME BPVC section VIII div.-1 and Finite Element Analysis (FEA) is done to meet requirements of ASME BPVC Section VIII Div-2 as .

Section 3.8.6 & BPS (ASME BPVC Section IX, part QB) N/A ASME BPVC Section IX, part QB N/A Visual examination ASME BPVC Section V ASME BPVC Section VIII Div. 1 EN ISO 9712 or SNT-TC-1A (ASNT) - minimum level 2 HP Dimensional control Section 4.1 - to be defined by supplier Functional drawings approved by CERN Supplier NP Helium leak tightness test

ASME B31.8 Gas Transmission and Distribution Piping Systems ASME B36.10M Welded and Seamless Wrought Steel Pipe ASME B36.19M Stainless Steel Pipe ASME BPVC Sect. II Part D Material Properties ASME BPVC Sect. III Rules for Nuclear Facility Components, Division 1 ASME BPVC Sect. VIII Rules

1½" ASME, 300 lb 5 E 1½" ASME, 600 lb 5 F 2" ASME, 150 lb 5 G 2" ASME, 300 lb 5 H 2" ASME, 600 lb 5 J 3" ASME, 150 lb 5 K 3" ASME, 300 lb 5 L 3" ASME, 600 lb 5 M 4" ASME, 150 lb 5 N 4" ASME, 300 lb 5 P 4" ASME, 600 lb 5 Q Welded flange, 316L stainless steel, Type A flat faced1) DN 25, PN 16 6 A DN 25, PN 40 6 B DN 40, PN 16 6 C DN 40, PN 40 6 .

1½" ASME, 300 lb 5 E 1½" ASME, 600 lb 5 F 2" ASME, 150 lb 5 G 2" ASME, 300 lb 5 H 2" ASME, 600 lb 5 J 3" ASME, 150 lb 5 K 3" ASME, 300 lb 5 L 3" ASME, 600 lb 5 M 4" ASME, 150 lb 5 N 4" ASME, 300 lb 5 P 4" ASME, 600 lb 5 Q Welded flange, 316L stainless steel, Type A flat faced DN 25, PN 16 6 A DN 25, PN 40 6 B DN 40, PN 16 6 C DN 40, PN 40 6 D .

Referenced BPVC Sections Individual BPVC Sections often reference other BPVC Sections, typically: Section II, Parts A-B-D (Materials) Sections IX and II, Part C (Welding) Section V (Nondestructive Examination) That’s why savvy users purchase the complete BPVC and save! “ASME Codes and Standards are

ASME BPVC Sec III Div I ND ND-6223 10 mins Nuclear:Class 3 Components ASME BPVC Sec III Div I ND ND-6412 not less than 1½ times nor more than 4 times theTest Pressure Nuclear:Class 3 Components ASME BPVC Sec III D