HALOGEN WORKLIGHT

2y ago
13 Views
2 Downloads
2.63 MB
8 Pages
Last View : 16d ago
Last Download : 5m ago
Upload by : Aliana Wahl
Transcription

HALOGEN WORKLIGHTMODEL NO: HLC400PART NO: SEE 5460680ASSEMBLY & USERINSTRUCTIONSORIGINAL INSTRUCTIONSGC1119 -ISSUE 2

INTRODUCTIONThank you for purchasing this CLARKE 400W (230V halogen flood light withhandle and grill. This worklight is for domestic use and similar applications butnot to be used on construction sites. The unit has a fixed height at floor level.Before attempting to use this product, please read this manual thoroughly andfollow the instructions carefully. In doing so you will ensure the safety of yourselfand that of others around you, and you can look forward to your purchasegiving you long and satisfactory service.TECHNICAL INFORMATIONModelHLC400Model type0203Dimensions (L x W x H)225 x 205 x 310 mmWeight1.5 kgTilt adjustment-90 to 90oOperating Temperature-20oC to 50oCPower Supply230V 50HzRated input current1.74 AInsulation ClassIIP RatingIP54 (exterior use)Energy Efficiency Class#C class tubeWeighted energy consumption400 kWh /1000hColour Temperature#2900 KEfficiency#21.4 lm/WLumen output # (luminous flux)8545Bulb (Halogen Tube Type)R7s-J118# - values given for the bulb supplied2Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GUARANTEEThis product is guaranteed against faulty manufacture for a period of 12months from the date of purchase. Please keep your receipt which will berequired as proof of purchase.This guarantee is invalid if the product is found to have been abused ortampered with in any way, or not used for the purpose for which it wasintended.Faulty goods should be returned to their place of purchase, no product canbe returned to us without prior permission. This guarantee does not effect yourstatutory rights.SAFETY PRECAUTIONS1. This worklight must never be immersed in water.2. Do not look directly into the lamp when switched on as this can harm theeyes.3. If used with an extension cable always ensure that the extension cable isfully unwound.4. Do not use this worklight if it has a broken lens, casing or damaged cable5. Always unplug the worklight before moving it or performing maintenance.Do not touch the lamp when your hands are wet.6. Do not attempt to disassemble or repair the worklight.7. Always unplug the worklight when it is not in use.8. Never unplug the worklight by pulling the cable, always hold the plug.9. Never use the worklight if the cable or plug are damaged.10. Always stand on firm, level ground.11. Do not cover the halogen bulbs or place combustable materials on top ofthe worklight.12. Do not place within 1m of combustable materials.SAFETY SYMBOLSThe following symbols appear on the unit.Hot surface, do not touch.Do not cover3Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONSWARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONSTHOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINSSUPPLY.Connect the mains lead to a standard, 230 Volt (50Hz) electrical supplythrough an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.If the plug has to be changed because it is not suitable for your socket, orbecause of damage, it must be removed and a replacement fitted, followingthe wiring instructions shown below. The old plug must be discarded safely, asinsertion into a power socket could cause an electrical hazard.WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARECOLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:BLUE NEUTRALBROWN LIVE YELLOW AND GREEN EARTHIf the colours of the wires in the power cable do not agree with the markingson the plug. The BLUE wire must beconnected to theterminal which ismarked N or colouredblack. The BROWN wire mustbe connected to theterminal which ismarked L or colouredred.Plug must be BS1363/A approved.Earth(Green andYellow)Neutral(Blue)Always fita 10 Ampfuse.Live(Brown)Ensure that the outer sheath ofthe cable is firmly held by the clamp The YELLOW ANDGREEN wire must beconnected to the terminal which is marked E oror coloured green.We strongly recommend that this product is connected to the mains supplythrough a Residual Current Device (RCD)If you are not sure, consult a qualified electrician.4Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY & MOUNTINGThe worklight must be mounted onthe carry frame as shown:1. Remove the locking knob fromthe base section of the carryframe, then insert the tubular baseinto the frame attachment, asshown.2. Line up the holes in the twosections of the frame thenreplace and tighten the lockingknob.MAINTENANCEAlways allow the lamp to cool before performing any maintenance.The halogen tubes supplied have a life expectancy of approximately 2000hours and can be fitted/replaced by the user.1. Remove the screw holding thefront of the lamp closed andhinge it away from the lamp. The tube is a simple press-fit inthe holder at each end.2. Do not touch the tube if hot.When handling the new tube useclean paper or cloth.DO NOTallow your fingers to come intocontact with the glass. If thishappens, clean the glass with methylated spirit.3. Close the cover and re-tighten the screw.4. Clean the lens at regular intervals using a non-abrasive glass cleaner.Further replacement tubes can be obtained from your local dealer or ClarkeInternational Spares Department.Type R7s-J118 - 230V -Max 400WClarke Part No. 54606705Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CARE & STORAGE1. When not in use, switch off & unplug from the power supply.2. Store this worklight in a secure, dry place, out of the reach of children. DONOT leave it exposed to the elements and avoid direct sunlight, directheat, rain/moisture etc.3. Keep the external surfaces clean. Avoid impact damage & do not allowthis worklight to come into contact with abrasive or corrosive materials.4. Do not use solvents, thinners or alcohol for cleaning (with the exception ofthe halogen tubes), as these chemicals will damage the finish. With theworklight unplugged from the power supply, use a dry cloth to wipe overthe components.5. Only use extension leads that are of an appropriate power rating andsuitable for the work environment. Inspect the extension lead regularly andreplace if damaged.6. Never use unauthorised accessories or attachments which may result inpersonal injury or damage to the product.7. Do not attempt to repair or modify this product or attempt any electricalrepair yourself beyond replacing halogen tubes. Consult the Clarke ServiceDepartment on 020 8988 7400.ENVIRONMENTAL RECYCLING POLICYThrough purchase of this product, the customer is taking on theobligation to deal with the WEEE in accordance with the WEEEregulations in relation to the treatment, recycling & recovery andenvironmentally sound disposal of the WEEE.In effect, this means that this product must not be disposed of with generalhousehold waste. It must be disposed of according to the laws governingWaste Electrical and Electronic Equipment (WEEE) at a recognised disposalfacility.6Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY7Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

10.Always stand on firm, level ground. 11.Do not cover the halogen bulbs or place combustable materials on top of the worklight. 12.Do not place within 1m of combustable materials. SAFETY SYMBOLS The following symbols ap

Related Documents:

This guarantee does not effect your statutory rights. SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable al

A non-MDM, cross-platform, private mobile app store tailored to the needs of development team or as an enterprise store! IBM Worklight: Main Components App Runtime !! Client APIs available for native, hybrid, and web apps! Development ! Run Time! Worklight Server!! Gateway for mobile user

With MaaS360 Application Security, Worklight app developers gain seamless access to a comprehensive set of mobile security features that are easy to implement and facilitate wide scale adoption in the enterprise. Worklight develop

Field installation kit, worklight on rear fender Author: Dirk Leitschuh Subject: European-version tractors 6230 Premium to 6930 Premium, 7430 Premium, 7530 Premium, 7430 E Premium and 7530 E Premium; tractors for North America 6230 Premium to 6430 Premium and 7130 Premium to 7530 Premium Created Date: 1/28/2011 6:32:07 AM

Nomenclature of Alkyl Halides Alkyl halides are compounds in which a hydrogen of an alkane has been replaced by a halogen. Alkyl halides are classified as primary, secondary, or tertiary, depending on the carbon to which the halogen is attached. Primary alkyl halides have a halogen bonded to a primary carbon, secondary alkyl halides

each anion. EN14582 states that pure analytical-grade water may be used as an absorption solution if the expected halogen and sulfate content is less than 10g/kg (10,000ppm or 1%). This recommendation does not hold up when applied to flux due to its high load of nitrogen, phosphorus,

12 Litre Halogen Oven Model number G2SH03001. CONTENT: . carrying handle, then place the top resting the stainless steel edge rim first on a suitable heat resistant flat surface. . Unlike a microwave, food cooked in this oven is heated evenly without hot and cold spots and without

The Icecast Anatomy pressure casting system allows the clinician to produce a reliable, repeatable and well-fitting TSB socket. DESIGN Icecast Anatomy is a single chamber pressure casting system, which provides pressure to shape the soft tissue. The single chamber pressure system is designed to provide optimal pressure distribution. The chamber is reinforced with matrix, for durability and to .