12 MAJOR ENHANCEMENTS 700 REMINGTON 700 BOLT HIGH-PERFORMANCE
MARCH 2009Superior Shooting Systems GTON 700 BOLTSUPERIOR QUALITYPRECISION MANUFACTURED12 MAJOR ENHANCEMENTSFASTER LOCK-TIMEMADE IN THE U.S.A.This replacement bolt solves every problem and provides over one dozen performanceenhancements.PRODUCTSengineeredby 11-timeNationalThe Remington 700 has long been one of the most popular actions for high-precision tactical, target, and hunting rifles. Foryears now, serious rifleman have demanded more from the original firing system design, and have paid dearly for these modifications.High PowerChampionDavid TubbSuperior Shooting Systems Inc. has rolled all the very best Remington 700 bolt modifications into a new precision-manufactured part, plus enhancements that haven’t been available (required a totally re-engineered product to attain, like thisone). This new bolt cures every problem we’ve all had to work around in the original design, plus provides greatly enhancedperformance.Available in Long Action and Short Action with your pick of Small, Standard, PPC, Magnum, and .338 Lapua Mag. boltfaces.Small, Standard, and PPC bolt face comes with Tubb 2000 Extractor. Magnum and .338 Lapua Mag. bolt faces comewith Tubb A-Style Extractor (large size). Left-handed model available in short-action, standard (.473) bolt face.READ ALL ABOUT THE FEATURES ON THE NEXT PAGESGUNSMITHING REQUIRED! Please note that this part is NOT a “drop-in” installation and will require gunsmith attention. If you use all your original Remington parts it will be necessary for a competent gunsmith to fit the bolt’s locking lugs,which requires the removal of a small amount of material from the back side of the locking lugs, and also to set headspaceto ensure safe operation. If you install a new barrel and/or the available Tubb Recoil Lug, you will not have to remove anymaterial from the locking lugs of the new bolt, but headspacing will still be required.H-P REMINGTON 700 BOLTCall 806/323-9488 with questions or to order. www.SuperiorShootingSystems.com
MARCH 2009Superior Shooting Systems Inc.SSSinc.SUPERIOR QUALITYPRECISION MANUFACTURED12 MAJOR ENHANCEMENTSFASTER LOCK-TIMEMADE IN THE U.S.A.HIGH-PERFORMANCEREMINGTON 700 BOLTFEATURES700HIGHPERFORMANCEPRODUCTSengineered1. Bolt is blueprinted (straight and trued) from the very start, black finish (this is a high-precision-made part)2. Mil-Spec Silver-soldered bolt handle, also has TIG weld bead on its underside for worry-free durabilityby 11-timeNationalHigh PowerChampion3. Tactical Style Bolt Knob. Comes with tear-drop-type knob — other knob styles are available (call for availability)4. SpeedLock Systems Alloy Composite Firing Pin with .062 hardened steel tip (approximately 1/3 faster lock-time andextreme durability)David Tubb5. Chrome Silicon alloy firing pin spring (never needs replacing). CS Springs are heat-treated, stainless steel, and stressrelieved — same material used in Indy racing car valve springs5647129836. Lightened Cocking Piece — further decreases lock-time7. Aluminum Bolt Shroud for lighter weight8. Spiral Fluted Bolt Body for lighter weight and enhanced appearance11109. .699-inch Diameter Bolt Body to eliminates the need for bushing the bolt(front and rear) for a snug mating to the action. Snug bolt better groups!10. Tubb 2000 or A-Style Extractor (made from S-7 Tool Steel) with groundplunger pin and Chrome Silicon alloy plunger spring131211. .110-inch Ejector Plunger Diameter (normal is .135). This will help minimize brass flow into the ejector hole, and with asmaller ejector plunger hole in the locking lug the bolt is slightly stronger.12. Smaller .065-inch Diameter Firing Pin Hole — gone are the days of pierced primers (a normal Remington bolt’s firing pinhole is normally .078). Additionally, increased striker energy is imparted onto the primer for more reliable ignition.13. Engineered weight savings total up to provide a reduction of over 4 ounces when compared to a factory bolt — this isapproaching 1/3 less weight of the complete bolt assemblyH-P REMINGTON 700 BOLT100-Percent Chrome Silicon springs are used throughout this bolt, including ejector and extractor. These springs never needreplacement and will maintain optimum performance over the life of the rifle.Call 806/323-9488 with questions or to order. www.SuperiorShootingSystems.com
MARCH 2009Superior Shooting Systems Inc.SSSinc.700HIGH-PERFORMANCEREMINGTON 700 BOLTSUPERIOR QUALITYPRECISION MANUFACTURED12 MAJOR ENHANCEMENTSFASTER LOCK-TIMEMADE IN THE U.S.A.HIGHPERFORMANCEFEATURESPRODUCTSengineeredby 11-timeNationalHigh PowerChampionDavid TubbSupplied with tear-drop knob shown center.Other knob styles are available, sold separately.H-P REMINGTON 700 BOLTCall 806/323-9488 with questions or to order. www.SuperiorShootingSystems.com
MARCH 2009Superior Shooting Systems Inc.SSSinc.700SUPERIOR QUALITYPRECISION MANUFACTURED12 MAJOR ENHANCEMENTSFASTER LOCK-TIMEMADE IN THE U.S.A.HIGH-PERFORMANCEREMINGTON 700 BOLTSEE SUPPLEMENTAL INFORMATIONON NEXT PAGEHIGHPERFORMANCEVALUEPRODUCTSengineeredby 11-timeNationalHow much would this cost if a competent gunsmith did the work on your stock bolt?1.Truing and bluing 150.002.Tactical bolt knob 80.003.Installing bolt knob 42.004.SpeedLock firing pin 50.005.Chrome Silicon firing pin spring 12.956.Lighted cocking piece 15.007.Aluminum bolt shroud 24.008.Spiral fluted bolt 110.009.Bushing the bolt body (front and rear) 150.00High PowerChampionDavid Tubb10. Tubb 2000 or A-Style extractor 24.9511. Installation of extractor 90.0012. Smaller ejector plunger“unobtanium”13. Bushing firing pin hole (to .065-inch diameter) 100.00Total is 848.90 and the original cost of the bolt wasn’t included! That’s a lot, but it’s a lot of new parts and a lot of worktoo. The retail price on the Superior Shooting Systems Inc. Remington 700 Bolt is 379.95. That’s considerably lessthan half the cost of all the modifications mentioned, and if you take your old Remington 700 bolt to a gunshow we’ll betyou can get upwards of 100 for it. That option makes this setup an even better bargain.SSS INC. REMINGTON 700 BOLT —RETAIL 379.95H-P REMINGTON 700 BOLTCall 806/323-9488 with questions or to order. www.SuperiorShootingSystems.com
MARCH 2009Superior Shooting Systems Inc.SSSinc.700SUPERIOR QUALITYPRECISION MANUFACTURED12 MAJOR ENHANCEMENTSFASTER LOCK-TIMEMADE IN THE U.S.A.HIGH-PERFORMANCEREMINGTON 700 BOLTHIGHPERFORMANCEPRODUCTSengineeredPhotos on this page show the 6 different current production bolts as are available in longaction Magnum, Standard, and .338 Lapua bolt faces; short action lengths are .223,Standard, and Magnum bolt faces. Note the extractor differences.by 11-timeNationalHigh PowerChampionDavid Tubb.223MAGNUM.338 LAPUAThe appropriate extractor is used for theappropriate bolt faceSHORT ACTIONMAGNUMLONG ACTIONSTANDARD.223STANDARDMAGNUM.338 LAPUAH-P REMINGTON 700 BOLTPlease note that the Tubb Remington Recoil Lug shown in some of these photos is highly recommended forinstallation in any custom rifle, but is not included with the Remington 700 High Performance Bolt.Call 806/323-9488 with questions or to order. www.SuperiorShootingSystems.com
Available in Long Action and Short Action with your pick of Small, Standard, PPC, Magnum, and .338 Lapua Mag. bolt faces.Small, Standard, and PPC bolt face comes with Tubb 2000 Extractor. Magnum and .338 Lapua Mag. bolt faces come with Tubb A-Style Extractor (large size).Left-handed model available in short-action, standard (.473) bolt face.
Remington Model 121 Fieldmaster Remington Model 141 Remington Model 241 Remington 270 Remington 336 Remington Model 504 Remington Model 511 Scoremaster Remington Model 512 Sportmaster Remington Model 513 Remington Model 572 Fieldmaster . Remington Model 600 Remington Model 660 Remington Model 673 Remington
30 Rebate q remington model 700 sP & 700 aDL rifles 40 Rebate q remington model 11-87 shotguns 50 Rebate q remington model 770 rifles 40 Rebate FIrearms ammunItIon q remington Premier Copper solid abot lugs 5 one box or 10 two boxes I have included _UPCs x 5.00 _ q remington Core-Lokt Cartidges 2.50 one box .
on a Remington 700 Installing an External Bolt Stop/Release on a Remington 700 The factory bolt stop/release mechanism on Remington 700 rifles is sometimes considered a weak point in the design. If the stop mechanism binds in the narrow slot that houses it, the shooter can accidentally rem
Remington, .30 Remington, .32 Remington, and .35 Remington. (Footnote: Great Model 8) In 1907, Remington introduced various grades of refinement, running from A-F, with A being the basic option, and F being the Premi
ČESKÁ REPUBLIKA, www.cz.remington-europe.com IRELAND Tel. 353 (0) 1 460 4711 Remington Consumer Products, Unit 7C, Riverview Business Park, New Nangor Road, Dublin 22, IRELAND, www.remington.co.uk MAGYARORSZÁG Tel. 36 1 3300 404 Remington Szervizközpont, 1138 Budapest, Váci út 136/a, www.
REMINGTON Power Pro Semi-automatic Model 496 The Remington Power Pro Model 496 is designed for use with Remington 27 caliber power load strips and Remington power fasten-ers which are no longer than 3". Remington power fasteners are manufactured from special steel and heat treated to pro
Remington firearm, write to us at Remington Arms Company, Inc., Consumer Service, P.O. Box 700, Madison, NC 27025-0700, or call us at 1-800-243-9700. DON’T KEEP THIS TO YOURSELF. . Remington Premie
Depth 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm Width 635 mm 635 mm 635 mm 635 mm 680 mm 635 mm 680 mm 635 mm 680 mm CAPACITY GROSS VOLUME IN LITRES (AS 1430) Refrigerator PC 232 litres 250 litres 283 litres 280 litres 271 litres 314 litres 314 litres 229 litres 342 litres
