Design ET, EAT, And ETR Sliding-Stem Control Valves
Product Bulletin51.1:ETJune 2005ET ValveDesign ET, EAT, and ETRSliding-Stem Control ValvesDesign ET, EAT, and ETR general-purpose controlvalves (figures 1, 2, 3, and 4) are used for throttlingor on-off control of a wide variety of liquids andgases. All three valve designs have single ports,balanced valve plugs, and cage guiding.Metal-to-PTFE seating for stringent shutoffrequirements is standard in all valves except thosewith Cavitrolr III cages. Metal-to-metal seating forhigher temperatures is standard for valves withCavitrol III cages and optional for all other valves.The temperature limits of Design ET valves can beextended above 232 C (450 F) by using PEEK(PolyEtherEtherKetone) anti-extrusion rings incombination with a spring-loaded PTFE seal. ThePEEK anti-extrusion rings expand to close off theclearance gap between the plug and the cage wherethe PTFE seal may extrude at high temperaturesand pressures. The temperature limits are extendedto 316 C (600 F) for non-oxidizing service and to260 C (500 F) for oxidizing service.Unless otherwise noted, all NACE references are toNACE MR0175-2002.The easy-er Valve FamilyDesign ET, EAT, and ETR control valves are part ofthe versatile easy-er family of industrial controlvalves from Fisherr. easy-e valves share thefollowing characteristics:D Multiple trim material choicesD Interchangeable, restricted-capacity trims andfull-sized trims to match variable process flowdemandsW1916-3 / ILFigure 1. Design ET Control Valve with Type 667 ActuatorD100022X012D Different cage/plug styles that provide particularflow characteristics for highly-specializedapplications. The standard cage comes in threedifferent flow characteristics: J quick-opening,J linear, or J equal percentage.www.Fisher.com
Product Bulletin51.1:ETJune 2005ET ValveContentsFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2ENVIRO-SEALr and HIGH-SEALtPacking Systems . . . . . . . . . . . . . . . . . . . . . . . . . 3ANSI/FCI Class VI ShutoffCapabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4TablesAvailable Constructions . . . . . . . . . . . . . . . . 3Shutoff Classifications . . . . . . . . . . . . . . . . . 3Class VI Shutoff Availability . . . . . . . . . . . . 4Class VI Trim Materials . . . . . . . . . . . . . . . . 4Trim Materials . . . . . . . . . . . . . . . . . . . . . . . . 8Materials and Temperature Limits forOther Parts . . . . . . . . . . . . . . . . . . . . . . . 15Valve Body/Trim TemperatureCapabilities . . . . . . . . . . . . . . . . . . . . . . . 16Bonnet Selection Guidelines . . . . . . . . . . . 17Maximum Flow Coefficients . . . . . . . . . . . 17Port Diameters, Valve Plug Travel,Stem and Yoke Boss Diameters . . . . . 18Metal Trim Parts (NACE) . . . . . . . . . . . . . . 21Bolting Materials and Temperature Limits(NACE) . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Ordering Information . . . . . . . . . . . . . . . . . . . . . . . 25Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42ENVIRO-SEAL Packing SystemSpecifications . . . . . . . . . . . . . . . . . . . . . . . . . . 44D Whisper Trimr I, Whisper Trim III (figure 7),and WhisperFlot cages (figures 5 and 6) attenuateaerodynamic noise in gaseous service.D To help eliminate cavitation damage in aproperly-sized valve, a standard-travel, Cavitrol III,one-stage cage (figure 9) and a long-travel, CavitrolIII, two-stage cage are available in the 1- through8-inch Design ET control valve.D Optional constructions allow materialcompatibility with NACE Standard MR0175-2002.FeaturesD Compliance with the Clean Air Act—ENVIRO-SEAL packing systems (figures 10 and 11)that provide an improved stem seal to help preventthe loss of process fluid are available. Thesepacking systems feature PTFE or Graphite ULFpacking with live-loading for reduced packingmaintenance.D PTFE Seating for Long-Lasting ShutoffCapability—Controlled compression of standardseat construction protects PTFE disk between metaldisk seat and disk retainer (figure 2). Only the edgeof the PTFE disk is contacted by the flowstreamduring normal operation. Excellent shutoff ismaintained by a backup ring or spring-loading thatforces the valve plug seal ring against the cage(figure 2).D Stable Control—Rugged cage guidingstabilizes the valve plug at all points in its travel toreduce vibration, mechanical noise, and the need forhydraulic snubbers.D Cost-Effective Operation and MaintenanceEconomy—Increased wear resistance of hardenedstainless steel trim means longer-lasting service.When inspection or maintenance is necessary, thebody can stay in the pipeline during removal of trimparts. Balanced valve plug construction permits useof smaller, lower-cost actuators from Fisher. TheDesign ETR valve also permits easy body interioraccess without having to remove the bonnet oractuator (figure 4). And, trim inventory costs are cutbecause dimensional standardization permits use ofmost standard easy-e trim parts.NoteNeither Emersont, Emerson ProcessManagement, Fisher, nor any of theiraffiliated entities assumesresponsibility for the selection, useand maintenance of any product.Responsibility for the selection, use,and maintenance of any productremains with the purchaser andend-user.2D Compliance with European Standards—Valves are available with dimensions specified byEN/DIN standards. See figure 16.D Sour Environment Capability—Materials areavailable for applications handling sourenvironments. These materials comply with therequirements of NACE MR0175-2002.
Product Bulletin51.1:ETJune 2005ET ValveTable 1. Available ConstructionsBODY MATERIAL AND END CONNECTION STYLE(1)DESIGNETEATETRVALVE SIZE,INCHCast Iron BodyCarbon Steel, Alloy Steel, or Stainless Steel BodyScrewedClass 125FF FlangedClass 250RF FlangedScrewed1, 1.5, or 21.252.5, 3, 4, 6, or 81 or 23, 4, or 6XX-------X--X-----X--X-----1, 1.5, or 21.252.5, 3, or 4---------------------RF or RTJ FlangedClass 150Class 300Class -XXXX--XXXXX---X-----X-----X-----X-----X-----X Available Construction.1. End connection style abbreviations: FF - Flat Faced, RF - Raised Face, RTJ - Ring Type Joint.Table 2. Shutoff Classifications Per ANSI/FCI 70-2 and IEC 60534-4Valve DesignAll exceptp those with Cavitrol III cagesgSeatingPTFEShutoff ClassStandard Air Test (maximum leakage is 0.05 mL/min/psid/inch port diameter)(2)V (optional)VI (optional)(4)MetalIV (standard)V (optional)(1)VI (optional)(4)ET with Cavitrol III one-stageg cagegMetalET with Cavitrol III two-stage cagesMetalVReplaceable,protected softseatStd or Cavitrol IIItrim.Replaceable,protected softseat.TSO(3)TSO is not an ANSI leakage classclass.Valves with TSO trim are factory tested to a more stringent Fisher test requirementof no leakage at time of shipment. Test medium is water. Specify service nP whenordering. Shutoff class V.IV (standard)V (optional)ET and EAT w/ TSO (Tight Shutoff)trim (Class 125 through 600)ET w/ TSO (Tight Shutoff) trim (Class125 through 600)1. Class V shutoff requires spring-loaded seal ring, radius-seat plug, and wide-bevel seat ring (not available with 8-inch port, quick-opening cage). Not available with trims 4, 29, and 85.2. This is a special non-ANSI/FCI leakage class.3. For additional information, contact your Fisher sales office.4. Refer to table 3.ENVIRO-SEALr, HIGH-SEALt PackingSystemsbellows seal system (figure 10). The patentedemission control packing system keeps emissionconcentrations below the EPA 500 ppm requirement.The ENVIRO-SEAL and HIGH-SEAL packingsystems from Fisher offer exceptional sealingcapabilities. These systems easily install in existingvalves or can be purchased with new valves. Thesesystems help seal the process to conserve valuableprocess fluid. The long-life and reliability of thesesystems also reduce maintenance cost anddowntime.For an excellent stem seal in applications that arenot environmentally-sensitive, Fisher offers theHIGH-SEAL Graphite ULF packing system (figure11). The HIGH-SEAL packing system providesimproved sealing at pressure/temperature ratingsbeyond ENVIRO-SEAL limits.For applications requiring compliance withenvironmental protection regulations, Fisher offersthe unique ENVIRO-SEAL packing system (figure11) and, for hazardous service, the ENVIRO-SEALENVIRO-SEAL packing systems, available withPTFE, Graphite ULF, or duplex packing, and theHIGH-SEAL Graphite ULF packing system featurelive-loading and unique packing-ring arrangementsfor long-term, consistent sealing performance.3
Product Bulletin51.1:ETJune 2005ET ValveANSI/FCI Class VI Shutoff CapabilitiesDesign ET valves with soft seat and metal seat constructions can provide ANSI/FCI Class VI shut-off capabilities.See tables 3 and 4.Table 3. Class VI Shutoff Availability(1)TypePort Size, InchesSeatMinimum Seat LoadET 3.4375 7SoftSee Catalog 14ET 3.4375 7Metal300 lbs/lineal inch1. Limited retrofit capability. Consult your Fisher sales office.Table 4. Class VI Trim MaterialsTYPECAGE/SEATRING RETAINERS31600 / ENCS31600 / ENCETS17400 (17-4PHSST)S17400VALVE PLUGSEAL RINGTRIM TEMPERATURE LIMITCFUHMWPE(1) Elgiloy–198 to 66–325 to 150S31600 w/ widebeveled seat(special design)UHMWPE Elgiloy–198 to 66–325 to 150S31600/PTFEUHMWPE Elgiloy–29 to 66–20 to 150S31600 w/ widebeveled seat(special design)UHMWPE Elgiloy–29 to 66–20 to 150S31600 w/ standardbeveled seatS31600/CoCr-A seatw/ radiused seat(special design)S41600 w/ standardbeveled seatS31600/PTFES41600 w/ radiusedseat (special design)1. UHMWPE (Ultra High Molecular Weight Polyethylene)4SEAT RING
Product Bulletin51.1:ETJune 2005ET ValveRETAININGRINGSEAL RINGLOADRINGMETALBACKUPRINGSEAL RINGW7019-1 / ILW0995–2 / ILW2914–1 / ILSTANDARD 8ĆINCHCONSTRUCTION1Ć THROUGH 4ĆINCH DESIGN ET(ALSO 1Ć THROUGH 6ĆINCH DESIGN EAT)6Ć OR 8ĆINCH DESIGN ETSPRINGĆLOADED SEAL RING CONSTRUCTIONFOR USE WITH CAVITROLr CAGES AND FORMETAL SEAT WITH OPTIONALCLASS V SHUTOFFPTFE V-RINGPACKINGCAGEGASKETBONNETGASKETBONNET GASKETBACKUP RINGSEAL VE PLUGSHIMSPIRALWOUNDGASKETW2001-2 / ILPINSEAT RINGGASKETMETALDISK SEATPTFE DISKMETAL DISKRETAINEROPTIONAL RESTRICTED TRIMMETALSEATRINGW0983-2 / ILW3162–3 / ILSTANDARD 1Ć THROUGH6ĆINCH CONSTRUCTIONOPTIONAL METALĆTOĆMETALSEATINGFigure 2. Design ET Sectional with Standard Cages5
Product Bulletin51.1:ETJune 2005ET ValveW1557-4 / ILW0972-3 / ILFigure 3. Design EAT SectionalFigure 4. Design ETR SectionalW6980 / ILWhisperFlor TRIMW6851-1 / ILFigure 5. Typical Valve with WhisperFlor Aerodynamic Trim6
Product Bulletin51.1:ETJune 2005ET ValveW7065 / ILFigure 6. Typical WhisperFlor Cage7
Product Bulletin51.1:ETJune 2005ET ValveTable 5. Typical Combinations of Metal Trim Parts for All Valves Except Those for NACE Specification(1), Cavitrolr III(2), 6-InchWhisper Trimr III(3), and 4-, 6-, and 8-Inch WhisperFlor Cages(6)Trim DesignationValve PlugOptional Liner(Metal SeatDesign EATBody Only)S41600or CA15((4)) (410 stainlesssteel), both hardened to38 HRCS41600hardened to38 HRC———3S31600with seat and guidehard faced withCoCr-Ahardfacing alloyR30006 (alloy 6)———4S31600CB7Cu-1hardened to40 HRCS31600S3160027S31600with seat and guidehard faced withCoCr-Ahardfacing alloyCF8M withelectrolessnickel coating(ENC)S31600disk retainer withCoCr-A disk seatR30006 (alloy 6)———28S31600with seat hardfaced with CoCr-Ahardfacing alloyCF8M withelectrolessnickel coating(ENC)S31600disk retainer withCoCr-A disk seatR30006 (alloy 6)———29 (standard for CF8M bodiesin all designs regardless ofseat construction)S31600CF8M withelectrolessnickel coating(ENC)S31600S3160037 and 37H (trim 37H hasclearances forhigh-temperature serviceabove 210 C [410 F])S31600with seat and guidehard faced withCoCr-ACB7Cu-1hardened to40 HRCS31600disk retainer withCoCr-A disk seatSeat Ring:R30006 (alloy 6)———57 (standard for standardPTFE-seat Designs ET, EAT,ETR in all body materialsexcept CF8M)S41600hardened to38 HRCS17400hardened to40 HRCS31600——————S17400 hardenedto 40 HRC(5)1. For NACE specification trims, see table 172. For Cavitrol III trims, see table 6.3. For 6-inch Whisper Trim III trims with 5.375 inch port diameter, see table 84. CA15 is used for 6- and 8-inch full-sized and restricted-trim valves.5. For 8-inch Whisper Trim I and 8-inch Whisper Trim III.6. For 4-, 6-, and 8-Inch WhisperFlo trims, see table 7.8Seat Ring orLiner for OptionalMetal-Seat ConstructionCB7Cu-1hardened to40 HRCCB7Cu-1hardenedto 32 HRC(5)1 (typically used with optionalmetal-seatmetalseat constructions in alldesigns and body materialsexcept CF8M)S41600hardened to38 HRCCageDisk Seat and RetainerforStandardPTFE-SeatConstructionR30006 (alloy 6)———S31600S31600
Product Bulletin51.1:ETJune 2005ET ValveTable 6. Cavitrolr III(1) Metal Trim Part Materials and Body/Trim Temperature S42000CAGERETAINERCAGES17400stainlesssteel withH900h tt theat-treatconditionS31600SEATRINGS17400with H900heat-treatconditionMATERIAL TEMPERATURECAPABILITYBODY & BONNETCFMinimumMaximumMinimumMaximumWCC carbon steel,WC9 chrome molysteel, or LCC/HTcarbon steelCF8M1, 1.5,or 2 in.body size–29Thesematerials notlimiting factors–20Thesematerials notlimiting factors–29Thesematerials andsizes notlimiting factors–20Thesematerials andsizes notlimiting factors2.5or 3 in.body size4, 6,or 8 in.body size–29216–20420–29177–203501. Available only in 1- through 8-inch Design ET valves.Table 7. WhisperFlor Metal Trim Part Materials and Valve Body/Trim Temperature Capabilities (4-, 6-, and 8-inch Design ET 6WCC936316CF8MVALVEPLUGS41600S31600/CoCrASeat andGuideS31600/CoCrASeat andGuideS31600/CoCrASeat andGuideCAGECAGERETAINERMATERIAL TEMPERATURE CAPABILITY(1)CSEATFMinMaxMinMaxS41000WCC ENCS41600–29316–20600S41000WCC ENCS31600/CoCrA–29316–20600S41000 /R31233S31600/ENCS31600/CoCrA–198316–3256001. Temperatures above 232 C (450 F) require PEEK anti-extrusion rings and spring-loaded seal ring. This option allows Design ET construction to be used up to 316 C (600 F) fornon-oxidizing service and 260 C (500 F) for oxidizing service.9
Product Bulletin51.1:ETJune 2005ET ValveTable 8. Whisper Trimr III Metal Trim Part Materials and Body/Trim Temperature Capabilities (6-inch Design ET with 5.375 inchport only)TrimDesignationValve Plug301 (standard S17400for all bodyhardened tomaterials40 HRCexceptp CF8M))301C (for soft S17400seats)hardened to40 HRC304CageCageRetainerBaffle(For LevelD3 CageOnly)S41600Carbon steelhardened to NACE with38 HRCelectrolessnickel coatingg(ENC)SteelS41600Carbon steelhardened to NACE with38 HRCelectrolessnickel coatingg(ENC)SteelS31600 with S41600seat andhardened toguide38 HRChard-facedith CoCr-AC C AwithCarbon steelNACE withelectrolessnickel coatingg(ENC)SteelS31600 withseat andguidehard-facedith CoCr-AC C AwithS31600 withelectrolessnickelcoatingg(ENC)S31600 withelectrolessnickel coating((ENC))S31600S31600 withseat andguidehard-facedwithith CoCr-AC C AS31600 withelectrolessnickelcoatingg(ENC)S31600 withelectrolessnickel coating((ENC))S31600 withseat andguidehard-facedith CoCr-AC C AwithS31600 withelectrolessnickelcoatingg(ENC)Carbon steelNACE withelectrolessnickel coatingg(ENC)Steel313C (NACE S31600 withcompatible)seat and(for soft seats) guidehard-facedwithith CoCr-AC C AS31600 withelectrolessnickelcoatingg(ENC)Carbon steelNACE withelectrolessnickel coatingg(ENC)Steel312(for level DNACE)312C313 (NACEcompatible)S31600Disk SeatSeat Ring forBodyand RetainerMetal-SeatBonnet,for& 000WCC carbonhardened to 38 steel or WC9HRCchrome molysteelMaterial TemperatureCapabilityCF–29 to316(1)–20 to600(1)CF8M(316 SST)WCC carbonsteel or WC9chrome molysteel–29 to 163–20 to 325–29 to 204–20 to 400–29 to 163–20 to 325---CF8M(316 SST)S31600 withWCC carbonseatsteel or WC9hard-faced with chrome molyCoCr-Asteel–29 to316(1)–20 to600(1)–29 to 177–20 to 350---CF8M(316 SST)S31600 withWCC carbonseatsteel or WC9hard-faced with chrome molyCoCr-Asteel–29 to260(1)–20 to500(1)–198 to316(1)–29 to260(1)–325 to600(1)–20 to500(1)CF8M(316 SST)S31600 withWCC carbonseatsteel or WC9hard-faced with chrome molyCoCr-Asteel–198 to316(1)–29 to 204–325 to600(1)–20 to 400CF8M(316 SST)WCC carbonsteel or WC9chrome molysteel–29 to316(1)–29 to 204–20 to600(1)–20 to 400CF8M(316 SST)–29 to 204–20 to 400S31600S31600---S31600---------CF8M(316 SST)WCC carbonsteel or WC9chrome molysteel1. Temperatures above 232 C (450 F) require PEEK anti-extrusion rings and spring-loaded seal ring. This option allows Design ET construction to be used up to 316 C (600 F) fornon-oxidizing service and 260 C (500 F) for oxidizing service.10
Product Bulletin51.1:ETJune 2005ET ValveBONNETSPACERCAGERETAINERW2670 / ILW3746A-4 / ILFigure 7. Metal Seat and Whisper Trimr III Cage in 6-InchDesign ET ValveFigure 9. Cavitrolr III One-Stage CageBELLOWSSEALBONNETVALVE PLUGSEALW7020-1 / ILFigure 8. Typical Balanced TSO TrimPROTECTEDSOFT SEATBELLOWS SEALASSEMBLYWITH VALVEPLUGW5821-1 / ILFigure 10. Typical ENVIRO-SEALr Bellows Seal Bonnet andBellows Seal Assembly11
Product Bulletin51.1:ETJune 2005ET NNETLANTERNRINGW8533–1TYPICAL HIGH-SEALt PACKING SYSTEMWITH GRAPHITE ULF PACKINGW5803–3 / ILTYPICAL ENVIRO-SEALr PACKING SYSTEMWITH PTFE PACKINGPACKINGBOXSTUDSPRINGSFOLLOWERPACKINGW7018-1 / ILW8532-1TYPICAL ENVIRO-SEALr PACKING SYSTEMWITH GRAPHITE ULF PACKINGTYPICAL ENVIROĆSEALr PACKING SYSTEMWITH DUPLEX PACKINGFigure 11. ENVIRO-SEALr and HIGH-SEALt Packing Systems12
Product Bulletin51.1:ETJune 2005ET ValveFLUID TEMPERATURE, CFLUID TEMPERATURE, C50100150200 250110160060800506004029 OR 5733040020200PRESSURE DROP, PSI700–200–1000100 200 300 400–20FLUID TEMPERATURE, F50050 1001509080701000608001 OR 3751OR37H60050403040020100–1000100 200 300 400 500450 4–20FLUID TEMPERATURE, F600FOR OPTIONAL METAL SEATINGWITH CLASS 600 WCC STEEL, OR WC9 CHROMEMOLY STEEL, BODY2FLUID TEMPERATURE, C110–100 –501001400050 100150200 250 30011016009010008001OR37H51 OR 3770603450600404003042001,4 OR 3732051002–1000100 200 300 400 500450 4–50–20FLUID TEMPERATURE, F6008070100028,2980010040304002029252001 OR 375100151050–1002000100 200 300 400 600450–20FLUID TEMPERATURE, FFOR OPTIONAL METAL SEATING WITHCLASS 250B 2 CAST IRON BODYPRESSURE DROP, BAR303003100–10023540010100200300400 500450 4600FLUID TEMPERATURE, F405005027–2002006006027600FOR OPTIONAL METAL SEATING WITHCLASS 600 LCC/HT STEEL BODY030FLUID TEMPERATURE, CPRESSURE DROP, PSI9012002000–2001001400PRESSURE DROP, PSI8037PRESSURE DROP, BAR1200PRESSURE DROP, PSI100200 250 3001600A6736-2/IL110–200FLUID TEMPERATURE, C0200 250 3000FOR STANDARD PTFE SEATING WITH ALL BODY MATERIALS–100 –501502001001001200PRESSURE DROP, BARPRESSURE DROP, PSI4OR2931000805014009012000160010014002–100 –50PRESSURE DROP, BAR0PRESSURE DROP, BAR–100 –50FOR OPTIONAL METAL SEATING WITHCLASS 600 CF8M(316 SST) BODYNOTES:1 USE TRIM 27 INSTEAD OF TRIM 29 FOR NONLUBRICATINGFLUIDS SUCH AS SUPERHEATED STEAM OR DRY GASESBETWEEN 149 C (300 F) AND 232 C (450 F).2 DO NOT EXCEED THE MAXIMUM PRESSURE AND TEMPERATUREFOR THE CLASS RATING OF THE BODY MATERIAL USED,EVEN THOUGH THE TRIMS SHOWN MAY HAVE HIGHER CAPABILITIES.3 TRIMS 4 AND 29 MAY BE USED UP TO 99 BAR (1440 PSI) WITH CLEANDRY GAS. FOR PROCESS FLUIDS OTHER THAN CLEAN DRY GAS,USE TRIMS 4 AND 29 ONLY UP TO 21 BAR (300 PSI).4 TRIMS, 1, 27, AND 37H TEMPERATURE LIMITS CAN BE EXTENDEDTO 316 C (600 F) FOR NON-OXIDIZING SERVICE OR 260 C(500 F) OXIDIZING SERVICE IF PEEK ANTI-EXTRUSION RINGSARE USED WITH SPRING-LOADED SEAL RINGS.5 USE TRIM 37H INSTEAD OF TRIM 37 FOR TEMPERATURESABOVE 210 C (410 F). REQUIRES ANTI-EXTRUSION RINGS ANDSPRING-LOADED SEAL RINGS FOR TEMPERATU
www.Fisher.com D100022X012 Design ET, EAT, and ETR Sliding-Stem Control Valves Design ET, EAT, and ETR general-purpose control valves (figures 1, 2, 3, and 4) are used for throttling or on-off control of a wide variety of liquids and gases. All three valve designs have single ports, balanced valve plugs, and cage guiding.
IP Office Essential Edition - Issue 1a (16 May 2010) ETR Telephones: 1. ETR Telephones The IP Office PARTNER Version supports the ETR Series of Avaya phones. The models supported are the ETR 6D, ETR 18D and ETR 34D phones. Feature ETR 6ETR 6DETR 18ETR 18DETR 34D Programmable buttons with lights 4 4 16 16 32 Programmable buttons without lights 0 .
www.Fisher.com Fisher ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures 1, 2, and 3) are used for throttling or on-off
ETR PR-06 Form Using the ETR Form document The ETR Form is a dynamic .pdf file that will change format as data is entered. Input fields expand to accommodate content. Some sections may be duplicated as needed. Some sections may be omitted based on user responses. Fields such as names and dates are linked to reduce duplication of entry.
Scalarexponential: Matrixexponential: eat 1 at a2t2 2! a3t3 3! . eAt I At A2t2 2! A3t3 3! . ea 0 1 eA I e at 1 eat e At eAt 1 ea (t1 2) eat1eat2 eA 1 t2) eAt1eAt2 e(a1 2)t e1tea2t e(A1 A2 eA1te 2t onlyifA 1A2 A2A1 d dt e at ae eata d dt eAt AeAt eAtA t 0 eatdt 1 a eat 1 t 0 eAtdt A 1 eAt I eAt I A 1 ifA
spaige@eat.uk.com mmota@eat.uk.com vwood@eat.uk.com flewis@eat.uk.com 01924 478 482 Reach Academy Head Teacher Hannah Lord hlord@eat.uk.com 01924 478 482 Ethos College DSL Diane Dunn ddunn@eat.uk.com 01924469170 07803508293 Ethos College DDSLs Lucy Beeby Michelle Brown lbeeby@eat.uk.com mbrown@eat.uk.com 07803508245 07803508232
If information provided by the parent is listed on the ETR planning page, the information must appear in Part 1 and be summarized in Part 2 of the ETR. It should list relevant content relating to the student’s background, medical history, stren
6. Instruct the empl oyee to begin the test and to utilize maximum effort to cover the 4‐Minutes 7. Record the meter distance for the 4 ‐Minute test on the ETR ‐164 8. Sign the ETR‐164 and obtain the signature of the employee who was tested 9. Send ETR‐164 to the Physical Fitness inbox at Physicalfitness@dps.texas.gov in the format .
Modules which are part of Biology (Human) specifications only. * Only part of this chapter is required in the module: the sections needed are indicated in the te xt. The content you need for your AS exam. MICROSCOPES AND CELLS (1) 1 Cells are the basic units of organisms. In many organisms, cells are organised into tissues and tissues into organs. Several organs often link into an organ system .
