Power And Gas Siemens Steam Turbine SST-600
Power and GasSiemens Steam Turbine SST-600This PDF offers an advanced interactive experience. This symbol indicates interactive content.For the best viewing experience, please use Acrobat Reader X or higher.www.siemens.com/steamturbines
Siemens SST-600: Highly-versatileGenerator or mechanical drive – the Siemens SST600 is configured for many possible applications.piping system, e.g. as a boiler feedwater pumpdrive.The flexible SST-600 packaging fits a broad range ofcustomer needs. It can be designed for optimumback-fitting to an existing process, e.g. when amunicipal utility is modernized.Or it is also well suited where high-efficiencysteam turbines are demanded with best-in-classblading and minimized losses.Or, when space is limited, it can be adapted as acompact steam turbine package age with a small oilSiemens SST-600 is the right answer to meet allof these different needs.Generator drive in various packagesWe deliver a standard steam turbine generator setincluding the SST-600 (with or without gearbox), agenerator, oil system, piping and instrumentationand control system.The standard package can be extended to include acondenser, condensing plant or pre-heating system.Multi-casing solutions are also possible, enabling forexample combined heat and power plants to easilyrespond to seasonal changes. In summer, when lessdistrict heating is needed, one turbine can be takenoff the multi-casing steam turbine train.SST-600 in RiskullaMechanical driveThe SST-600 is also an efficient and economicmechanical drive.Standard steam turbine generator setSince the 1970s, hundreds of projects have been successfully implemented all over the world using theSST-600 to directly drive everything from the smallestboiler feed water pump as as reliably as the biggestcompressor even in the most complex processes. TheSST-600 complies with regulations including the APIstandard.
Siemens SST-600OverviewThe SST-600 is a single-casing steam turbinedesigned for operation within a speed range of3,000 to 18,000 rpm for generators or mechanicaldrives up to 150 MW.pled. The customized steam path is arrangedaccording to the customer’s needs.The SST-600 with its reliable and flexible design isavailable with axial or radial exhaust.The turbine is used for both condensing and backpressure applications, either geared or directly cou-The SST-600 can be used as:Generator driveCompressor driveBoiler feed water pump driveBlower drive351Design enhancements provide:4Increased efficiency due to lower flow lossesReduced start-up times due to faster turbineheat-up2Fast load changesCompact design for simplified transportation[1] Main modules[2] Package[3] Steam conditioning[4] Steam extraction[5] Steam inletsSimplified maintenance thanks to improvedavailability, horizontal casing split and independently accessible bearings
Siemens SST-600: Technical overviewPower output: up to 150 MWChemical and petrochemical industryLive steam inlet pressure: 165 bar / 2,393 psiSpeed: 3,000 to 18,000 rpmLive steam inlet temperature : 565 C / 1,050 FControlled extractions (up to 2):Pressure, ext. valve 72 bar / 1,044 psiPressure, int. valve 55 bar / 798 psiTemperature 480 C / 895 FExhaust conditions:Back pressureCondensingDistrict heatingUncontrolled extractions (up to 6):Pressure 85 bar / 1,233 psi 80 bar / 1,160 psi 1.0 bar / 15 psi 3.0 bar / 43 psiTypical applications for the SST-60087Chemical and petrochemical industryPulp and paper mills6Steel worksMinesPower plantsSeawater desalination plantsEnergy-from-waste plants (waste incinerators)[6] Blades[7] Sealing[8] Casing and bearings
Siemens SST-600: Reference unitsCombined heat and power plant inJänschwalde, Germany412756The Vattenfall combined heat and power plant(CHP) has a capacity of 3,000 MW. The power plantconsists of six 500 MW units.3Siemens delivered steam turbines of the type SST600 operating as boiler feed water pump drives.[1] Jänschwalde, Germany[2] Linz, Austria[3] Guaiba, Rio Grande do Sul, Brazil[4] Västergötland, Sweden[5] Al Taweehla, Abu Dhabi[6] Port Dickson, Malaysia[7] Andalusia, SpainSwitch to printable overviewPower output (single unit): 9.4 MWLive steam temperature: 535 C / 1034 FLive steam pressure: 39 bar / 1523 psiExhaust steam pressure: 3.5 barSpeed: 5,400 rpm
Published by and copyright 2015:Siemens AGPower and Gas DivisionFreyeslebenstr. 191058 Erlangen, Germanywww.siemens.com/steamturbinesFor more information, please contact our Customer Support Center:Phone 49 / (0) 180 / 524 70 00Fax 49 / (0) 180 / 524 24 71(Charges depending on provider)E-mail: support.energy@siemens.comAll rights reserved. Trademarks mentioned in this document are theproperty of Siemens AG, its affiliates or their respective owners.Subject to change without prior notice. The information in this document contains general descriptions of the technical options available,which may not apply in all cases. Any technical options requiredshould therefore be contractually specified. 04.2015 Siemens AG
Siemens SST-600 The SST-600 is a single-casing steam turbine designed for operation within a speed range of 3,000 to 18,000 rpm for generators or mechanical drives up to 150 MW. The turbine is used for both condensing and back-pressure applications, either geared or directly cou-pled. The customized steam path is arranged
Page 2 June 2015 Large Steam Power Plants Siemens Steam Turbines for coal-fired Steam Power Plants Power output 120 MW to 700 MW Max. steam parameters Main steam / Hot reheat steam 177 bar / 600 ºC / 620 ºC 2,570 psi / 1,110 ºF / 1,150 ºF SST-5000 series for coal-fired Steam Power Plants
17 Table 3. Compressed Water and Superheated Steam (continued) 0.01 MPa (ts 45.806 C) 0.02 MPa (t s 60.058 C) 0.03 MPa (t s 69.095 C) v ρh s t, C v h s t, C v ρ h s 26 446. 0.037 814 3076.7 9.2827 300 13 220. 0.075 645 3076.5 8.9625 300 8811.0 0.113 49 File Size: 630KBPage Count: 60Explore furtherCalculator: Superheated Steam Table TLV - A Steam .www.tlv.comSuperheated Steam Tables - Gilson Enggilsoneng.comCalculator: Superheated Steam Table TLV - A Steam .www.tlv.comCalculator: Superheated Steam Table TLV - A Steam .www.tlv.comSteam Table Calculator Superheated Steam Region Spirax .www.spiraxsarco.comRecommended to you b
3.5 Steam-Cycle Power Plants 127 3.5.1 Basic Steam Power Plants 127 3.5.2 Coal-Fired Steam Power Plants 128 3.6 Combustion Gas Turbines 131 3.6.1 Basic Gas Turbine 132 3.6.2 Steam-Injected Gas Turbines (STIG) 133 3.7 Combined-Cycle Power Plants 133 3.8 Gas Turbines and Combined-Cycle Cogeneration 134 3.9 Baseload, Intermediate and Peaking Power .
Siemens Steam Turbine SST-800 Power and Gas This PDF offers an advanced interactive experience. This symbol marks up interactive content. For the best viewing experience, please use Acrobat Reader X or higher. Siemens SST-800 Introduction The SST-800 is a single casing steam turbine with
2. Use the steam control to select the amount of steam you want ( m low, l medium, h high). 3.2. Squeeze the steam button to produce steam, release it to stop. NOTE: When you first start your steam station and pull the trigger for steam ironing, there will be a delay as your steam station pumps water from the reservoir to prime the system.
Superheated steam. Properties of steam Steam tables To determine various steam properties . Guide C, Section 4, or IOP Guide Total enthalpy, h g h f (sensible) h fg (latent) Extract from superheated steam tables Extract from the saturated steam tables Do you know how to use these steam tables? (Source: www.spiraxsarco.com .
Utility steam turbine package Eemshaven, Netherlands Reduced lifecycle costs with the SST-6000 steam turbine Siemens Steam Turbines of the SST 6000 series are widely operated in steam power plants with a power output up to 1,200 MW and net plant efficiencies of more than 46 percent. Turbine
UNIT 2 STEAM POWER PLANT Steam Power Plant Structure 2.1 Introduction Objectives 2.2 Basic Consideration in the Analysis of Power Cycles 2.3 Steam Generator 2.4 Super Heater 2.5 Feed Water Heater 2.6 Furnaces 2.7 Energy Performance Assessment of Boilers 2.8 Steam Turbines 2.9 Condenser 2.10 Cooling Tower
