North American Drivelines & Components Metric Drivelines .
AFTERMARKET PRODUCT GUIDENorth AmericanDrivelines & ComponentsMetric Drivelines &ComponentsSprockets, Hubs& PulleysClutchesConstant VelocityDrivelines & ComponentsWEASLER
The eight-digit numbering system used in this Product Guide identifies Weasler Engineering products, is a Weasler Engineering, Inc. trademark,and may not be used for other purposes without the express consent of Weasler Engineering, Inc.“Weasler” and the Weasler logo are also trademarks of Weasler Engineering, Inc.The Transparency Identification System (T.I.S.) for Domestic, Metric and 44/55 Series driveline components are copyrighted and may not becopied without the express consent of Weasler Engineering, Inc.
Weasler INDEXSAFETY SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1QUICK REFERENCE SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Warning & Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Easy Lock Guard System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Greasing Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Driveline Length Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cross & Bearing Kit Interchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shafting & Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Universal Joint Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Easy Lock Guarding System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 Constant Velocity Driveline Replacement Chart . . . . . . . . . . . . . . . . . . . . . .1000 Series Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Locking Device & Locking Device Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Unit Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2346810121316171819DRIVELINE REPLACEMENT APPLICATIONS SECTION . . . . . . . . . . . . 21NORTH AMERICAN DRIVELINE & COMPONENT SECTION . . . . . . . . 39Part Number Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .North American Transparency Identification System . . . . . . . . . . . . . . . . . . . . . .6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .W Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .O675 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2600 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shafting & Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shock Absorbing Flexible Coupling Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Nylon Bearing Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Locking Device & Locking Device Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .4041424751566166707273767779798081METRIC DRIVELINE & COMPONENT SECTION . . . . . . . . . . . . . . . . . . 83Metric Transparency Identification System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Part Number Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7N Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Series - Bondioli & Pavesi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2100/100 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2200/200 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2300/210 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220/720 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2400 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2500 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2600 Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .II Series - Walterscheid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Shafting & Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metric Replacement Driveline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Q.D. Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0132133134137
Weasler INDEXCONSTANT VELOCITY DRIVELINES AND COMPONENTS SECTION . 13980 Constant Velocity Driveline - Features and Benefits . . . . . . . . . . . . . . . . . . .North American Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 Constant Velocity Driveline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metric Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 CV’s for Flex-Wing Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 CV Round Baler Drivelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140143155157165167168CLUTCH SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169TorqMaster Part Number Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TorqMaster Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TorqMaster Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Clutch Pak Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .North American Clutch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metric Clutch Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Replacement Clutch Applications - Features and Benefits . . . . . . . . . . . . . . . . . .170171172173175178183SPROCKETS, HUBS, & PULLEYS SECTION . . . . . . . . . . . . . . . . . . . . . 185Welding Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sprocket & Hub Part Number System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sprockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pulleys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186186187191193MERCHANDISER SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195E-Kit Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .North American & Metric Rack Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .North American Drivelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44/55 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Metric Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sprockets, Hub, & Pulley Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196197198199200201
SAFETYSECTIONAFTERMARKETPRODUCT GUIDESAFETY1
SAFETYSECTIONSAFETY SECTIONWARNING! Be certain to disengage PTO shaft and to turn off the tractor before making any operationalmaintenance inspections or repairs. Keep clear of the machine until all parts have stopped moving. NEVER operate an implement with driveline guards missing or in a damaged condition. Guards must rotate freely on the yokes.SAFETY DECALSIMPORTANT CHECK THAT GUARD MISSING DECAL ONSTEEL TUBE UNDER INNER GUARD ANDROTATING DRIVELINE DECAL ON OUTERGUARD ARE FIRMLY AFFIXED, UNDAMAGEDAND READABLE - IF NOT, REPLACE.FOR USE ONIMPLEMENT ENDONLYGUARDS MUST ROTATE FREELY ON YOKESALL CLUTCHES MUST BE USEDON THE IMPLEMENT END ONLYYellow decal is provided on clutch.PART NO.: 13-10022PART NO.: 13-10021SAFETY MANUAL The Agricultural Driveline ManufacturersAssociation (ADMA) has printed a SafetyManual for owners and operators ofagricultural machinery. Copies can beordered from Weasler.PART NO.: 56-151232
EASY LOCK GUARD SYSTEMSAFETYSECTIONINSTRUCTIONS FOR REMOVAL AND INSTALLATION OF EASY LOCK GUARDSGREASE 8hrFOR NON-ROTATING GUARDSINSERT THE “S” HOOKTHROUGH THE GUARDLOOP AND CRIMP SHUTGREASE BUSHINGGREASE BUSHINGGREASE BUSHING 8hrClean and grease bearing racewaybefore the nylon bearing is placed inthe groove. Grease any remainingnylon bearings in guard.Turn the nylon bearing until it engagesinto the guard.5Slide guard half over driveline andinsert nylon bearing tabs into theopenings in the guard.Push Easy Lock clip into position.The nylon bearing and guard arenow secure. GUARDS MUST ROTATEFREELY ON YOKES.TO REMOVE GUARD - Use screwdriver to release Easy Lock clip. Turn thenylon bearings to disengage from the guard and remove guard.3
SAFETYSECTIONGREASING RECOMMENDATIONSBe certain to follow greasing instructions as identified below:4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGSTELESCOPING MEMBERSCROSS & BEARINGSCROSS & BEARINGSGUARD BUSHINGS4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGSTELESCOPING DRIVELINESLUBRICATE ALL FITTINGS WITH A GOOD QUALITY LITHIUM SOAP COMPATIBLE E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAININGNO MORE THAN 1% MOLYBDENUM DISULFIDE.AN E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAINING 3% MOLYBDENUM DISULFIDE MAY BE SUBSTITUTED IN THE TELESCOPINGMEMBERS ONLY.LOCATIONCROSS & BEARINGSTELESCOPING MEMBERS& NON-ROTATING GUARD BUSHINGS (1000 RPM MAX.)STANDARDINTERVAL*8 HRS.8 HRS.8 HRS.EXTENDED LUBEINTERVAL50 HRS.50 HRS.50 HRS.LEVERACTION PUMPS2-38-102ROTATING GUARD BUSHINGS SHOULD BE LUBRICATED UPON REPLACEMENT*CONSTANT ANGLE APPLICATIONS MAY REQUIRE A LUBE INTERVAL OF 4 HOURSCAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATEDREPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY AND DURING USE PER THE LUBE RECOMMENDATIONS4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGSC.V. CENTER HOUSINGCROSS & BEARINGSC.V. BALL & SOCKETTELESCOPING MEMBERS(80 CV)GUARD BUSHINGS4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGSCROSS & BEARINGS80 CONSTANT VELOCITY DRIVELINESLUBRICATE ALL FITTINGS WITH A GOOD QUALITY LITHIUM SOAP COMPATIBLE E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAININGNO MORE THAN 1% MOLYBDENUM DISULFIDE.AN E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAINING 3% MOLYBDENUM DISULFIDE MAY BE SUBSTITUTED IN THE TELESCOPINGMEMBERS ONLY.LOCATIONCROSS & BEARINGSTELESCOPING MEMBERSCV BALL & SOCKETCV CENTER HOUSING& NON-ROTATING GUARD BUSHINGS (1000 RPM MAX.)STANDARDINTERVAL*8 HRS.8 HRS.*8 HRS.24 HRS.8 HRS.EXTENDED LUBEINTERVAL50 HRS.50 HRS.50 HRS.50 HRS.50 HRS.LEVERACTION PUMPS2-38-104-612-152ROTATING GUARD BUSHINGS SHOULD BE LUBRICATED UPON REPLACEMENT*CONSTANT ANGLE APPLICATIONS MAY REQUIRE A LUBE INTERVAL OF 4 HOURSCAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATEDREPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY AND DURING USE PER THE LUBE RECOMMENDATIONS4
GREASING RECOMMENDATIONSSAFETYSECTION4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGSC.V. BALL & SOCKETTELESCOPING MEMBERSCROSS & BEARINGS(50 CV)GUARD BUSHINGSCROSS & BEARINGS4 BLACK SEALS VISIBLE ON STANDARD CROSS & BEARINGS50 CONSTANT VELOCITY DRIVELINESLUBRICATE ALL FITTINGS WITH A GOOD QUALITY LITHIUM SOAP COMPATIBLE E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAININGNO MORE THAN 1% MOLYBDENUM DISULFIDE.AN E.P. GREASE MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAINING 3% MOLYBDENUM DISULFIDE MAY BE SUBSTITUTED IN THE TELESCOPINGMEMBERS ONLY.LOCATIONCROSS & BEARINGSTELESCOPING MEMBERSCV BALL & SOCKET& NON-ROTATING GUARD BUSHINGS (1000 RPM MAX.)STANDARDINTERVAL*8 HRS.8 HRS.*8 HRS.8 HRS.EXTENDED LUBEINTERVAL50 HRS.50 HRS.N/A50 HRS.LEVERACTION PUMPS2-38-104-62ROTATING GUARD BUSHINGS SHOULD BE LUBRICATED UPON REPLACEMENT*CONSTANT ANGLE APPLICATIONS MAY REQUIRE A LUBE INTERVAL OF 4 HOURSCAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATEDREPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY AND DURING USE PER THE LUBE RECOMMENDATIONSGREASING RECOMMENDATIONS FOR CROSS & BEARING KITSSTANDARD CROSS & BEARING KITS (R-KITS) 8 HOURSEXTENDED LUBRICATION CROSS & BEARING KITS (E-KITS) 50 - 250 HOURSBA5
SAFETYSECTIONDRIVELINE LENGTH ADJUSTMENT48" (A)42" (B)Replacement Driveline1Existing Driveline32Remove guard from driveline. Separate drivelinehalves. Shorten guard halves (Pic. 1) and profiletube halves (Pic. 2) same as existing drivelinehalves or see example below.4Round off all sharpedges and removeburrs.5Grease slidingprofiles.Reassemble guard halves. Both profiletubes should extend 40-mm (1.58") beyondthe end of the guard tubes.6Reassemble driveline halves together making sure they slide (telescope) easilyand ensure guards rotate freely on yokes.EXAMPLE: If overall replacement driveline length dimension is 48" (See A), and your existing overalldriveline length dimension is 42" (See B), the amount to shorten EACH driveline half would be 6".Your driveline is now ready to reassemble and use.6
AFTERMARKETPRODUCT GUIDEQUICK REFERENCESECTIONQUICK REFERENCE7
CROSS REFERENCE CHARTNORTH AMERICAN COMPONENTSWeaslerCross & BrgKit Stock #WeaslerU-JointSeriesAPC/Wesco FR200-03003DR200-0600QUICK C COMPONENTSCross & BearingR-Kit Stock 9068SpicerU-JointSeriesCross & BearingE-KIT Stock Interchanges withBondioli & Pavesi Series157N89N/AN/AN/AIIN/A23467 (Old Series)N/AN/AN/AN/AInterchanges withWalterscheid 202302280238024802580
QUICK REFERENCE for Cross & Bearing KitsRing located inB Snapthe yoke (External)Ring located inA Snapthe bushing (Internal)NORTH 4400200-5500WEASLER (E)STOCK NO.SERIES(R) KITRATED H/P@ 540 1-3500201-4400201-5500Rockwell 1FRRockwell 301005177106WEASLER (E)STOCK NO.SERIES(R) KITRATED H/P@ 540 00120WEASLER (E)STOCK NO.SERIES(R) KITRATED H/P@ 540 037645380113(E) KIT(R) KIT(E) KITRATED H/P RATED H/P RATED H/P@ 540 RPM @1000 RPM @1000 1 1/16"1 1/8"1"1 3/8"1 1/4"1 5/16"1 17/32"CAP TO CAP SNAP RINGOVERALL LENGTHTYPEPAGE NO.2 15/16"3 15/16"2 9/32"2 5/16"1 1/2"2 9/32"2 1/2"2 5/8"3 7/32"4 3/16"3 7/32"4"4 5/16"BBAAPin & BlockAABABBAB76764272707347527677566267QUICK REFERENCESECTIONWEASLER (R)STOCK NO.ITALIAN SERIESWEASLER (R)STOCK 2200-6794200-6806200-6908(E) KIT(R) KIT(E) KITRATED H/P RATED H/P RATED H/P@ 540 RPM @1000 RPM @1000 70100122145185232BEARINGDIAMETER22.0 mm23.8 mm27.0 mm27.0 mm30.2 mm30.2 mm34.9 mm34.9 mm41.0 mmCAP TO CAP SNAP RINGOVERALL LENGTHTYPEPAGE NO.54.0 mm61.2 mm70.0 mm74.6 mm79.6 mm92.0 mm94.0 mm106.5 mm108.0 mmBBBBBBBBB8689929598102104107110GERMAN SERIESWEASLER (R)STOCK 6200-7989200-7004(E) KIT(R) KIT(E) KITRATED H/P RATED H/P RATED H/P@ 540 RPM @1000 RPM @1000 02144230BEARINGDIAMETER22.0 mm23.8 mm27.0 mm27.0 mm30.2 mm32.0 mm36.0 mm42.0 mmCAP TO CAP SNAP RINGOVERALL LENGTHTYPEPAGE NO.54.8 mm61.2 mm70.0 mm74.6 mm92.0 mm76.0 mm88.8 mm104.0 mmBBBBBBBB1131151171191221241271309
NORTH AMERICAN SHAFTING & TUBINGQUICK REFERENCESECTIONNorth American 14404-1615H404-1618404-2120404-2720Size3/4" Sq.15/16" Sq.1" Sq.1 3/16" Sq.1 1/4" Sq.1 5/16" Sq.3/4" 7/8" Rect.1" 1 1/8" Rect.1 3/16" Sq.1 5/16" Sq.3/4" 7/8" Rect.1" 1 1/8" Rect.1" Hex1 1/8" Hex1 3/16" Sq.1 5/16" Sq.3/4" 7/8" Rect.1" 15 Spl.1" 1 1/8" Rect.1 5/16" 20 Spl.1 11/16" 20 Spl.North American 0Size1" Sq.1 1/4" Sq. (.120 wall)1 1/4" Sq. (.109 wall)1 5/8" Sq.1" 1 1/8" Rect.1 1/4" 1 3/8" Rect.1" 1 1/8" Rect.1 1/4" 1 3/8" rect.1 1/2" Rd.2" Rd. (.083 wall)2 3/4" Rd. (.109 wall)2 1/8" Rd. (.120 wall)2 1/8" Rd. (.083 wall)2 1/2" Rd. (.120 wall)2" Rd. (.083 wall)2 1/8" Rd. (.120 wall)2 1/2" Rd. (.120 wall)1 1/2" Rd.1" 1 1/8" Rect.1 1/4" 1 3/8" Rect.2 1/8" Rd. (.120 Wall)2 1/2" Rd. (.120 wall)REPRESENTATIVE DRIVELINE SHOWING OVERALL LENGTHREPRESENTATIVE DRIVELINE SHOWING CENTERLINE TO '10'10'3'3'3'3'3'
METRIC PROFILE SHAFTING & TUBINGSTOCK NO. .0INCHES59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"59 1/16"39 3/8"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"58 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"59 1/16"39 3/8"USE erOuterOuterInnerInnerOuterOuter400-75391.559 1/16"Inner404-75391.039 3/8"Inner600-75481.559 1/16"Outer604-75481.039 3/8"Outer400-76511.559 1/16"Inner404-76511.039 3/8"Inner600-79611.559 1.01.51.01.51.039 3/8"59 1/16"39 3/8"59 1/16"39 3/8"OuterInnerInnerOuterOuterGERMAN-STYLE SHAFTING & TUBINGLemon & Star ProfileITALIAN-STYLE SHAFTING & TUBINGTri-Lobe ProfileQUICK REFERENCESECTIONSERIESByPy 1ByPy 1ByPy 1ByPy 1ByPy 2ByPy 2ByPy 2ByPy 2ByPy 3ByPy 3ByPy 3 & 4ByPy 3 & 4ByPy 4ByPy 4ByPy 5 & 6ByPy 5 & 6ByPy 5ByPy 5ByPy 6 & 7NByPy 8ByPy 6 & 7NByPy 8ByPy 7NByPy 7NByPy 9ByPy 9ByPy 8 & 9ByPy 8 & 9W/S 2100W/S 2100W/S 2100W/S 2100W/S I, 2200 & 2300W/S I, 2200 & 2300W/S I, 2200 & 2300W/S I, 2200 & 2300W/S 2400 (Lemon) &220/720W/S 2400 (Lemon) &220/720W/S 2400 (Lemon) &220/720W/S 2400 (Lemon) &220/720W/S 2400 &W/S 2500 (Star)W/S 2400 &W/S 2500 (Star)W/S 2400 &W/S 2500 (Star)W/S 2400 &W/S 2500 (Star)W/S 2600 (Star)W/S 2600 (Star)W/S 2600 (Star)W/S 2600 (Star)11
UNIVERSAL JOINT REPLACEMENTTO DISASSEMBLE UNIVERSAL JOINT1. Remove all snap rings1QUICK REFERENCESECTIONEXTERNAL2Position joint in loose vice, striketop arm of unsupported yoke todrive the top cup up. Repeat onopposite side.INTERNAL34Grip loosened cup in vise, strikeyoke arm to drive yoke off cup.Repeat on opposite cup.Support cross in loose vise andstrike yoke arm. Repeat Step 3 toremove remaining two cups.TO REASSEMBLE UNIVERSAL JOINT1234Smear grease into bearingsand check for dirt.CAUTION:Insert cup and cross. Drive inwith spacer.Insert snap ring.Insert second cup and holdcross into cup. Drive cup flushwith arm.MAKE SURE ALL NEEDLE BEARINGSARE SEATED PROPERLY5678GREASE KIT AFTER ASSEMBLY ISCOMPLETEDDrive cup down with spacerand insert snap ring.12To loosen cross, strike yokearm and check cross for freerotation.Position second yoke on cross.Repeat Steps 2 to 6.
EASY LOCK GUARDING SYSTEMPATENTEDQUICK REFERENCESECTIONNORTH 00-3560900-4448900-4460900-4448900-4460OLD NYLONBEARING 548900-2560902-3548902-3560902-3548902-3560NEW NYLONBEARING 921-4400PLEASE NOTE! Not all guard and nylon bearing systems are interchangeable. When purchasing shaft weld and tube weld yokes or guards, make certain there is a properfit between nylon bearing raceway in yoke and guard. Make sure guard rotates freely on the yokes. The nylon bearings provided are the most popular in the replacement market. If the nylon bearing provided is not a proper fit, it is essential that the propernylon bearing is identified and installed to insure proper performance and safety. To assist in ordering the proper nylon bearing, listed in this brochure arestock numbers and dimensions for nylon bearings. All Series North American guards are provided without nylon bearings. To help assure the proper set of nylon bearings are installed, one nylonbearing set will be exactly the same (nylon bearing raceway dimensions) as has always been provided in our aftermarket guards. The other set will bedimensioned to retrofit the Weasler OEM raceway. Assembly instructions included with these nylon bearing kits. ALL GUARDS ARE PROVIDED WITHOUT NYLON BEARINGS - ORDER NYLON BEARINGS SEPARATELY13
EASY LOCK GUARDING SYSTEMQUICK REFERENCESECTIONMETRIC14INTERCHANGESwith SERIESOLDGUARDSOLD NYLONBEARING KITSNEWGUARDSNEW NYLONBEARING KITSBYPY Y Y 3 & Y Y Y Y 8 & 00-4548900-4548900-4560961-4589961-4589961-4589W/S 2100 05W/S 2200 (AW20) & 900-8234W/S I 2548900-2548900-2560961-0251961-0251961-0251W/S 2300 51W/S 220 (AW22),900-8534W/S 2400 (AW35) & 900-8548W/S 2500 3548902-3560961-3525961-3525961-3525W/S 2600 54
EASY LOCK GUARDING SYSTEMNYLON BEARING REPAIR KITSTYPE A - FITS 250 GUARDSNORTH AMERICAN SERIESSTOCK No.921-0600921-1200921-5170SERIES612, 14 & 35WGUARDTYPE250250250DIM AINNER BRG. ID46.4-mm (1.83")52.8-mm (2.08")41.8-mm (1.65")DIM BINNER BRG. OD71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")DIM AOUTER BRG. ID46.4-mm (1.83")52.8-mm (2.08")41.8-mm (1.65")DIM BOUTER BRG.OD71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")GUARDTYPE250250250250DIM AINNER BRG. ID34.5-mm (1.36")40.4-mm (1.59")47.4-mm (1.87")41.4-mm (1.63")DIM BINNER BRG. OD71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")DIM AOUTER BRG. ID40.4 -mm(1.59")47.4-mm (1.87")53.4-mm (2.10")41.4-mm (1.63")DIM BOUTER BRG.OD71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")71.4-mm (2.81")25050.8-mm (2.00")71.4-mm (2.81")50.8-mm (2.00")71.4-mm (2.81")METRIC SERIESABINTERCHANGESW/SERIESByPy 1ByPy 2ByPy 3 & 4W/S 2100W/S 2200, W/S I& W/S 2300TYPE B - FITS 350/450 GUARDSQUICK REFERENCESECTIONSTOCK No.961-5029961-2502961-2534961-5005961-0251NORTH AMERICAN SERIESSTOCK No.921-4400SERIES44 & 55GUARDTYPE350DIM AINNER BRG. ID67.2-mm (2.65")DIM BINNER BRG. OD83.6-mm (3.29")DIM AOUTER BRG. ID67.2-mm (2.65")DIM BOUTER BRG.OD83.6-mm (3.29")GUARDTYPE350350450DIM AINNER BRG. ID53.5-mm (2.11")59.4-mm (2.34")68.4-mm (2.69")DIM BINNER BRG. OD83.6-mm (3.29")83.6-mm (3.29")103-mm (4.06")DIM AOUTER BRG. ID62.7-mm (2.47")68.4-mm (2.69")80.4-mm (3.17")DIM BOUTER BRG.OD83.6-mm (3.29")83.6-mm (3.29")103-mm (4.06")35045062.5-mm (2.46")82.8-mm (3.26")83-mm (3.27")103-mm (4.05")62.5-mm (2.46")82.8-mm (3.26")83-mm (3.27")103-mm (4.05")METRIC SERIESSTOCK CHANGESW/SERIESByPy 5ByPy 6 & 7ByPy 8 & 9W/S 220, W/S 2400,& W/S 2500W/S 2600TYPE CPREVIOUS-STYLE METRIC NYLON BEARING KITINTERCHANGES W/ABSTOCK 9960-0105960-0215960-0325960-0435SERIESByPy 1ByPy 2ByPy 3 & 4ByPy 5ByPy 6 & 7ByPy 8 & 9W/S 2100W/S 2200, AW11,& W/S 2300W/S 220, W/S 2400,& W/S 2500W/S 2600DIM AINNER BRG. ID34.8-mm (1.37")40.4-mm (1.59")47.4-mm (1.87")53.4-mm (2.10")59.4-mm (2.34")68.4-mm (2.69")41.4-mm (1.63")DIM BINNER BRG. OD57-mm (2.24")71.4-mm (2.81")71.4-mm (2.81")81.7-mm (3.22")98.8-mm (3.89")98.8-mm (3.89")57-mm ((2.24")DIM AOUTER BRG. ID40.8-mm (1.61")47.4-mm (1.87")53.4-mm (2.10")62.7-mm (2.47")68.4-mm (2.69")80.4-mm (3.17")41.4-mm (1.63")DIM BOUTER BRG.OD57-mm (2.24”)71.4-mm (2.81")71.4-mm (2.81")81.7-mm (3.22")98.8-mm (3.89")98.8-mm (3.89")57-mm ((2.24")50.8-mm (2.00")71.4-mm (2.81")50.8-mm (2.00")71.4-mm (2.81")62.7-mm (2.47")82.8-mm (3.26")81.7-mm (3.22)98.8-mm (3.89")62.7-mm (2.47")82.8-mm (3.26")81.7-mm (3.22")98.8-mm (3.89")15
EASY LOCK GUARDING SYSTEMPREVIOUS-STYLE NORTH AMERICAN NYLON BEARING KITAQUICK REFERENCESECTIONCABMETAL RETAINING RINGSTOCKNUMBERDIM AYOKE RACEWAY O.D.NYLON BEARING "DIM BNYLON BEARING O.D.(2 5/32")(1 49/64")(2 1/64")(1 13/32")(1 21/32")(2 5/32")(1 25/32")(1 41/64")(2 1/32")(1 25/64")(1 53/64")(2 3/32
Weasler Aftmkt. Weasler APC/Wesco Chainbelt G&G Neapco Rockwell Spicer Cross & Brg U-Joint U-Joint U-Joint U-Joint U-Joint U-Joint U-Joint U-Joint Kit Stock # Series Series Series Series Series Series Series Series 200-0100 1FR 200-0300 3DR 200-0600 6 L6W/6RW 6N
D. Metric Jogging Meet 4 E. Your Metric Pace 5 F. Metric Estimation Olympics. 6 G: Metric Frisbee Olympics 7 H. Metric Spin Casting ,8 CHAPTER III. INDOOR ACTIVITIES 10 A. Meteic Confidence Course 10 B. Measuring Metric Me 11 C. Metric Bombardment 11 D. Metric
Button Socket Head Cap Screws- Metric 43 Flat Washers- Metric 18-8 44 Hex Head Cap Screws- Metric 18-8 43 Hex Nuts- Metric 18-8 44 Nylon Insert Lock Nuts- Metric 18-8 44 Socket Head Cap Screws- Metric 18-8 43 Split Lock Washers- Metric 18-8 44 Wing Nuts- Metric 18-8 44 THREADED ROD/D
Universal Joints Drivelines are furnished without Cross & Bearing Kit and Implement Yoke. Select kit and Implement Yoke as required. When Cross & Bearing Kit and Implement Yoke are assembled, the overall compressed length of the driveline will be 48". Stock Overall Compressed Number
PARTS BREAKDOWN FOR 501-0650 1 3/4 - 20 SPLINE x SERIES 8 FF4 SLIP CLUTCH PART NO. 501-0650 PARTS BREAKDOWN FOR 501-0652 1 3/4 - 20 SPLINE x SERIES 6 FF4 SLIP CLUTCH PART NO. 501-0652 Slip Clutches to fit Domestic Drivelines Slip Clutches to fit Metric Drivelines Item Part No. Quantity Description Price
metric units. During Year 3 familiar metric units are introduced for length, mass and capacity. Working with metric units is extended in Year 4 to include familiar metric units for area and volume. Familiar metric units are metric units that would most commonly be experienced by
THE METRIC SYSTEM The metric system is much easier. All metric units are related by factors of 10. Nearly the entire world (95%), except the United States, now uses the metric system. Metric is used exclusively in science
1996–2005 5-speed Evolution and Twin Cam drivelines in conjunction with 130-series rear tires and 1½" or 11/ 8"-wide rear belts. The later version uses 2006-up 6-speed Twin Cam drivelines for 200-series rear tires and 11/ 8" or 1"-wide rear belts. They also offer both standard Dyna and
SESSIONS PAGE 1) Starting Off Right 2 String Names,Technique,Tuning,Finger Exercises, C & G7 Chords 2) Reading Music & Notes on the 1st & 2nd Strings 7
