Sunoco Pipeline L.P.
Sunoco Pipeline L.P.Eastern Area & Hebert Pipeline SystemsProduct SpecificationsJuly 25, 2019 July 27, 2020
TABLE OF CONTENTSPageSHIPMENT ACCEPTANCE TERMS4ADDITIONAL PRODUCTS FOR WHICH SPECIFICATIONS HAVE NOT BEEN ISSUED5TABLE 1 - SEASONAL VAPOR PRESSURE, DISTILLATION AND VAPOR LOCK PROTECTIONCLASS REQUIREMENTS6TABLE 2 – ADDITIVE APPROVALS AND PROHIBITIONS7PRODUCT GRADE SPECIFICATIONSCONVENTIONAL GASOLINE BLENDSTOCK FOR OXYGENATE BLENDINGProduct CodeProduct NameMax RVP (psi) PageS83CB18CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol7.89S83CB/CX/CZ19CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol8.09S83CB20CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol8.8 / 9.09S83CB/CX/CZ23CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol10.09S83CB/CX/CZ25CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol12.59S83CB/CX/CZ26CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol13.5 /14.59S83CB/CX/CZ27CBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol15.0 /15.5 / 16.0991CB18CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol7.8991CB/CX/CZ19CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol8.0991CB20CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol8.8 / 9.0991CB/CX/CZ23CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol10.0991CB/CX/CZ25CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol12.5991CB/CX/CZ26CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol13.5 /14.5991CB/CX/CZ27CBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol15.0 /15.5 / 16.09REFORMULATED GASOLINE BLENDSTOCK FOR OXYGENATE BLENDINGProduct CodeProduct Name83RB/RBX23RBOB ‐ 87 Octane after blending with 10% denatured fuel EthanolMin 25.4% VOC1183RB/RBX25RBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol11.5 (Non-VOC)1183RB/RBX26RBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol13.5 (Non-VOC)1183RB/RBX27RBOB ‐ 87 Octane after blending with 10% denatured fuel Ethanol15.0 (Non-VOC)1191RB/RBX23RBOB ‐ 93 Octane after blending with 10% denatured fuel EthanolMin 25.4% VOC1191RB/RBX25RBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol11.5 (Non-VOC)1191RB/RBX26RBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol13.5 (Non-VOC)1191RB/RBX27RBOB ‐ 93 Octane after blending with 10% denatured fuel Ethanol15.0 (Non-VOC)11Product Codes and Grade SpecificationsMax RVP (psi) PageJuly 25, 2019 July 27, 2020Page 2 of 29
DISTILLATES – FUNGIBLE GRADESOrigin(ppm)CetaneSulfurMinimum Maximum PageProduct CodeProduct Name500HO2500 ppm Heating Oil – Undyed15 ppm Heating Oil – Undyed( 5% Renewable Hydrotreated Diesel Fuel)15 ppm #2 – Motor Vehicle Undyed Diesel Fuel( 5% Renewable Hydrotreated Diesel Fuel)15 ppm #2 – Texas Low Emission Blendstock Diesel Fuel( 5% Renewable Hydrotreated Diesel Fuel)N/A4501340111440111640111815 ppm #2 – Motor Vehicle Undyed Diesel Fuel for Export15 ppm #2 – Undyed Non-Road, Locomotive, Marine DieselFuel ( 5% Renewable Hydrotreated Diesel Fuel)40111940112015HO215MV2UB Grade15EXP215NRLM401122400AV1K15 ppm #1 – Motor Vehicle Undyed Diesel Fuel(not for aviation use – DRA allowed)400 ppm Aviation KeroseneN/A40023JETAHigh Sulfur Aviation KeroseneN/A300025DISTILLATES – SEGREGATED GRADESHigh Sulfur Aviation KeroseneN/A30002715MV1JETA-FTZLIQUEFIED PETROLEUM GAS (LPGs) – FUNGIBLE GRADESProduct CodeProduct NamePageNBUTANENormal Butane28MIXBUTMixed Butane29Product Codes and Grade SpecificationsJuly 25, 2019 July 27, 2020Page 3 of 29
SHIPMENT ACCEPTANCE TERMSThe following are general terms and conditions regarding product quality for all products shipped on the SunocoPipeline L.P. (SPL) system, both fungible and segregated:1.0 A pre-shipment Certificate of Analysis (C of A), or a full C of A, must be received at SPL origin points, at least twohours prior to lifting. A full C of A, reflecting all tests listed in the SPL current specifications, must be receivedwithin 48 hours.1.1 Jet Fuel requires a full laboratory C of A meeting ASTM D1655 prior to lifting. Connecting carriers willprovide a pre-shipment FAX to include properties listed under section 1.4 below.1.2 The C of A must be based on a representative sample of the product to be tendered into the SPL system.The C of A cannot be from a similar tank or previous shipment, and not from a generic set of data for a"typical" product.1.3 The product sampled and tested for the C of A must be homogenous, such that the C of A is representativeof all batches originating from the tank C of A.1.4 At a MINIMUM, pre-shipment FAX to include:Conventional /CBOB GasolineRFG / RBOBGasolineDiesel / Heating Oil/ KeroseneAPI Gravity @ 60FAPI Gravity @ 60FAPI Gravity @ 60FJet Fuel(ConnectingCarriers)API Gravity @ 60FLiquefiedPetroleum GasesSpecific GravityRVPRVPFlash PointFlash PointVolatilitySulfur, wt. %Sulfur, wt. %Sulfur ContentSulfur ContentPropane oButane ContentOctane (R M) /2Color andAppearanceDRA, ppm totalpolymerOctane (R M) /2Cetane Index (Diesel)Filter MembraneOil Stain ResidueColor and AppearanceSaybolt ColorSaybolt ColorDRA, ppm totalpolymerDRA, ppm totalpolymer(Kerosene)Oxygen Content, wt. %Visual Appearancein White BucketWater Separation(MSEP)E200, vol%E300, vol%Benzene, vol%Olefins, vol%VOC Reduction, %Driveability Index2.0 Acceptance of the C of A by SPL does not relieve the shipper of liability or responsibility for specificationcompliance and composition of the product.3.0 SPL reserves the right to reject or terminate shipments when samples are found to deviate from the applicableCertificate of Analysis.4.0 SPL may sample and test products prior to acceptance, and during shipments, into the SPL system, and in the eventof a variance against the C of A, SPL results will prevail.5.0 For any parameter reported bordering on the specification maximum/minimum level, a recheck may be requiredprior to acceptance.6.0 Product exception for an off-specification parameter may be requested in writing to Sunoco Pipeline QualityAssurance. However, such requests will be assessed on a case-by-case basis and their approval is not guaranteed.7.0 Any water suspended in or received with shipper product will be deducted from shipment volumes. The shipperwill be requested to remove the water or be invoiced for handling and disposal charges at the then prevailing rate asdetermined by SPL.Product Codes and Grade SpecificationsJuly 25, 2019 July 27, 2020Page 4 of 29
8.0 Workmanship - Appearance8.1 The product shall be clear and bright, free of any suspended water, sediment or foreign material. Amaximum Haze rating of 2 as determined by ASTM D4176, Procedure 2 of either tank temperature or77 F (whichever is lowest) is the determining criteria.8.2 The product can contain no constituents that in SPL’s opinion would render it unacceptable for itscommonly accepted end use. Such constituents may include but are not limited to unusual color or productodor.9.0 PRODUCT TEMPERATURE - The maximum temperature of incoming product shall not exceed 100 F forGasoline, JETA, Aviation and Kerosene. The maximum temperature of incoming product shall not exceed 110 Ffor Diesel Fuel Oil or #2 Heating Oil.10.0 The only non-hydrocarbon components permitted to be blended in gasoline, moved by SPL, are those listed in thespecifications. The use of alcohols for blending purposes is prohibited in all gasoline, segregated or fungible.11.0 It is the Shipper’s responsibility to ensure the product meets all downstream carrier, federal, state or localrequirements not stipulated in the SPL specifications.12.0 All Test Methods listed are based on the most current ASTM, unless specified otherwise or are regulatory requiredtest methods.13.0 BIO-FUELS PROHIBITION POLICY: In the interest of protecting our shippers’ products, all products shippedare not permitted to contain Bio-Fuels, such as ethanol and bio-diesel (FAME, FAEE, or other Esters). Anydistillate not produced by the origin refiner (e.g., import, previously certified diesel), whether blended with refineryproduction or delivered directly into the pipeline, shall be tested by ASTM D7371 or EN 14078. FAME result mustbe below the detection limit of the test method used.SEGREGATED PRODUCTS FOR WHICH SPECIFICATIONS HAVE NOT BEEN PRODUCTNAMEBB StockIsoButaneLPG FSWEETSYNSOURHEAVYPRODUCTLube Extracted FeedstocksSweetSyntheticSourHeavy SourProduct Codes and Grade SVGOXYLEPRODUCTNAMEAlkylateBonded Turbine FuelCondensateDistillate ComponentGasoline ComponentLight Cycle OilNaphthaRaffinateReformateTolueneToluene/Xylene MixTransmixSegregated TransmixUnfinished GasolineVacuum Gas OilXyleneJuly 25, 2019 July 27, 2020Page 5 of 29
TABLE 1:SEASONAL VAPOR PRESSURE, DISTILLATION AND VAPOR LOCK PROTECTION CLASS REQUIREMENTSThe following schedule denotes the volatility properties as required by SPL and may not coincide with dates specified by appropriate government agencies. Some systems withinSPL may require earlier dates for summer RVP limits in order to ensure compliance with EPA federal regulations. Shippers will be advised in advance of the date that fungiblegasolines must be input into the SPL System via the scheduling calendar. SPL will monitor RVP compliance by ASTM D5191 using the EPA correction equation (0.956 * X) 0.347 in 40 CFR §80.46(c).APPROXIMATE ORIGIN MAXIMUM RVP AND DISTILLATION REQUIREMENTS (1)JanFebDestinationEastern Products SystemPittsburgh AreaOhioMichiganDetroit AreaTexas - Hebert SystemMar 114Mar15-31Apr 115Apr16-30MayJunJulAugSep 115Sep AA-3AA-3D-4D-4E-5E-5psi15.015.013.513.59.0 (3)9.0 (3)9.0 (3)9.0 (3)9.0 (3)9.0 (3)9.0 514.57.87.87.87.87.87.87.87.812.514.514.5Vapor Pressure /Distillation ClassMax VaporPressureAAADistillation Temperatures, F ( C), at % Volume Evaporated ASTM D86Residue Vol. %maxDriveability Index max, F( C) Derived (2)10 % max50 % min50 % max90 % maxEnd Point max7.8 / 8.0 / 8.8 / 9.0158 (70)150 (66)250 (121)374 (190)430 (221)21250 (597)10.0158 (70)150 (66)250 (121)374 (190)430 (221)21250 (597)B11.0149 (65)150 (66)245 (118)374 (190)430 (221)21240 (591)C12.5140 (60)150 (66)240 (116)365 (185)430 (221)21230 (586)D13.5 / 14.5131 (55)150 (66)235 (113)365 (185)430 (221)21220 (580)E15.0 / 15.5 / 16.0122 (50)150 (66)230 (110)365 (185)430 (221)21200 (569)Class: Vapor/Liquid Ratio of 20:1 ASTM D5188 F ( C) Min.For products which contain 10% Ethanol12345129 (54)122 (50)116 (47)107 (42)102(39)All limits are for gasoline-ethanol blends containing no more than 10 % by volume ethanol; refer to individual Product Grade specifications for specific RVPrequirements. T50, TV/L and RVP limits for all RBOBs and CBOBs must comply with the applicable requirements of the area in which the fuel is destined for retail.(2) The Driveability Index (DI) specification limits are applicable at the refinery or import facility as defined by 40 CFR §80.2.(3) Eastern Product System summer 9.0 psi RVP limit is for NY destinations; PA destinations may ship 10.0 psi RVP maximum.(1)Product Codes and Grade SpecificationsJuly 25, 2019 July 27, 2020Page 6 of 29
TABLE 2:ADDITIVE APPROVALS AND PROHIBITIONSSunoco Pipeline will permit only the types and concentrations of additives detailed below; all other types andconcentrations or additives are prohibited.GUM INHIBITORS AND METAL DEACTIVATORSGasoline shipments may, but are not required to, contain the following:N, N'di-secondary butyl para-phenylenediamineN, N'di (I-ethyl-2-methylpentyl) nediamineN,N-bis-(I, y butylphenol2,4-di-tertiary butylphenolN, secondary butyl, N'phenyl-para-phenylenediamineButylated ethyl, methyl and dimethyl phenolsN,N'disalicylidene-1, 2 propanediamine2, 6-di-tertiary butyl 4 methyl phenoln-Butyl para-aminophenol2,4,6 - tri-tertiary di-tertiary butylphenolMixed propylated and butylated phenols2,4,6 tri-isopropyl phenolCORROSION INHIBITORSAll products shipped on SPL, with the exception of all grades of Aviation Kerosene, are required to meet a minimumlevel of corrosion protection. The concentration of inhibitor dosage will be controlled to meet a minimum rating of B (less than 5% of test surface rusted) as determined by NACE Standard TM0172-2001, Test Method – DeterminingCorrosive Properties of Cargoes in Petroleum Product Pipelines.Gasoline shipped on Sunoco Pipeline may contain only the following corrosion inhibitors:Aqua Process11CH77MobilC-605Afton Chem.HiTEC 4875, 6455Nalco5403, 5405, 5406, EC5624A, EC5626ACorexitInnospecEthyl Hi TecLubrizolMidContinental5267DCI-4A, DCI-6A,DCI-11, DCI-30.N580SPEC-AIDToladUnichem541, 8014, 8017MCC50018Q22, 8Q110ULS, 8Q112ULS, 8Q123ULS245, 249, 351, 3232, 3232D, 3240, 4410, 9711,9715, 97197500, 7501, 7510UOPUnicor, Unicor J, Unicor PLChampion AthlonRPS-662, 807 611, RPS-661In addition to the above additives, the following may be used in diesel fuels and fuel oil transported by SPL: DuPontAFA-1, Innospec DMA-4, Nalco 5400-A, Nalco EC 5407-A, Infineum R511, Tolad 3032.Static Dissipater Additives (Conductivity Improvers)Product shipments may, but are not required to, contain static dissipater additives (SDA). The only approved SDA foruse on Sunoco Pipeline is Innospec Statis 450. SDA is prohibited from all Jet Fuel / Aviation Kerosene grades. Theorigin maximum concentration of Statis 450 is 0.75 mg/l, and the origin maximum conductivity allowed is 250 pS/m at21 C (70 F) by ASTM D2624.Aviation Kerosene AdditivesProduct shall only contain antioxidants and metal deactivators specified and within the concentration noted in the latestASTM D1655 with advance approval from Sunoco Pipeline prior to shipment. Use of these additives is expected to beshort term at reasonable treat levels, and is to be clearly indicated on the Certificate of Analysis. All other additives areprohibited. Sunoco Pipeline reserves the right to deny shipment of product containing these additives.Cloud and Pour Point Depressant AdditivesProduct shall only contain ethylene vinyl acetate copolymer based cloud and pour point depressant additives only uponadvance approval from Sunoco Pipeline prior to shipment. Use of these additives is expected to be short term atreasonable treat levels and is to be clearly indicated on the Certificate of Analysis. Sunoco Pipeline reserves the right todeny shipment of product containing cloud and pour point depressant additives.Product Codes and Grade SpecificationsJuly 25, 2019 July 27, 2020Page 7 of 29
Renewable DieselRenewable diesel is a liquid fuel derived from 100 % hydrotreated biomass-based feedstock’s that meets the registrationrequirements for fuels and fuel additives established by the EPA under section 211 of the Clean Air Act and therequirements of ASTM D975. Renewable diesel shall not contain fatty acid esters; FAME, FAEE, or other esters.Renewable Diesel as defined above is NOT considered biodiesel. All biodiesel remains prohibited on the pipeline.Distillate grades 15HO2, 15MV2, UB Grade and 15NRLM allow up to five (5) % by volume Renewable Diesel.Sunoco Pipeline assumes no responsibility as a blender and all RINs (Renewable Identification Numbers) shall beseparated before entering Sunoco Pipeline’s system. At origin locations the volume of Renewable Diesel shall bedisclosed on the COA (Certificate of Analysis).Cetane Improver AdditivesProduct shall only contain 2-ethyl hexyl nitrate or T-butyl peroxide based cetane improver additives only upon advanceapproval from Sunoco Pipeline prior to shipment. Use of these additives is expected to be short term at reasonable treatlevels and is to be clearly indicated on the Certificate of Analysis. Sunoco Pipeline reserves the right to deny shipmentof product containing cetane improver additives.Prohibited AdditivesSunoco Pipeline only permits certain types and concentrations of additives as referenced, while all other types andconcentrations of additives are prohibited. Prohibited additives include, but are not limited to the following:Lubricity additivesIntake Valve Detergent AdditivesPort Fuel Injector (PFI) additivesAdditives containing PhosphorousBiodieselMarker Solvent Yellow 124Additive Documentation RequirementsIf present, the type and concentration of approved additives must be clearly indicated on the Certificate of Analysis.Additive treat rates are acceptable for concentration reporting. Carrier may request review of volume reconciliation datato verify actual treat rates.Product Codes and Grade SpecificationsJuly 25, 2019 July 27, 2020Page 8 of 29
CB GRADES - FUNGIBLE SPECIFICATION FORCONVENTIONAL GASOLINE BLENDSTOCK (1)All parameters must be met after blending with denatured fuel ethanol unless noted.ASTM TESTMETHODD5191CB - GRADE RVPsS83CB18 / 91CB18BEFORE BLENDINGWITH 10%ETHANOL (14)RVP MAXIMUM (PSI)AFTER BLENDINGWITH 10%ETHANOLRVP MAXIMUM (PSI)6.67.8S83CB19/S83CX19/S83CZ19 / 91CB19/91CX19/91CZ19D51917.08.0S83CB20 / 91CB20D51917.88.8 / 9.0 (7)(14)S83CB23/S83CX23/S83CZ23 / 3CZ25 / 91CB25/91CX25/91CZ25D5191Report 11.512.5S83CB26/S83CX26/S83CZ26 / 91CB26/91CX26/91CZ26D5191Report 12.9 / 13.513.5 / 14.5 (7)S83CB27/S83CX27/S83CZ27 / 91CB27/91CX27/91CZ27D5191Report 14.5 / 15.015.0 / 15.5 / 16.0 (7)S83CB GRADE OCTANESRONASTM TESTMETHODD2699, D2885OCTANE MINIMUMOCTANE MINIMUMReportMOND2700, D2885Index, (R M)/291CB GRADE OCTANESRONMONIndex, (R M)/2Calculated D2699, D2885D2700, D2885CalculatedReportReport90.082.087.0(13)PRODUCT PROPERTYGravity, API at 60 FRVP (psi)OctaneRONMONIndex, (R M)/2Oxygen Content, wt. %Benzene, vol. %ColorCopper Strip Corrosion 3 hours @ 122 FSilver Strip Corrosion 3 hours @ 122 FDoctor test ORMercaptan sulfur, wt. %Solvent Washed Gum, mg/100 mlLead Content – g/gal at originOxidation stability – minutesPhosphorous, g/galSulfur, wt. %Haze Rating, @ 77 FCorrosive PropertiesOdorDistillationVapor/Liquid Ratio of 20:1Driveability IndexASTMTEST METHODD287, D1298, D4052D5191D519D2699, D2885D2700, D2885ReportReport93.0ORIGIN SPECIFICATIONS (2)MINIMUMMAXIMUMReportSee above and Table 1 on page 6NOTE127, 8, 10See table aboveD5599D3606D130D7667, D7671D4952D3227D381D3237, D5059D525D3231D2622D4176 Procedure 2NACE TM0172-2001D86D5188D4814Product Codes and Grade Negative240120.0040.00802B Non-offensiveRefer to Table 1Refer to Table 1Refer to Table 1111212611, 133, 13July 25, 2019 July 27, 2020Page 9 of 29
CB GRADES - FUNGIBLE SPECIFICATION FORCONVENTIONAL GASOLINE BLENDSTOCK (1) Cont’dGasoline designed for gasoline‐ethanol blends in accordance with 40 CFR §80.27(d)(2).Suitable for the special RVP provisions for ethanol blends that contain 9 and 10 % by volume ethanol.The use of this gasoline to manufacture a gasoline‐ethanol blend containing anything other than between 9 and 10 % by volumeethanol may cause a summertime RVP violation.(1) Base Gasoline - Not for sale to the ultimate consumer. This product does not meet the requirements forreformulated gasoline, and may not be used in any reformulated gasoline covered area.(2) Re
production or delivered directly into the pipeline, shall be tested by ASTM D7371 or EN 14078. FAME result must be below the detection limit of the test method used. SEGREGATED PRODUCTS FOR WHICH SPECIFICATIONS HAVE NOT BEEN ISSUED LPG PRODUCT PRODUCT CRUDE OIL PRODUCT CODE OTHER PRODUCT PRODUCT NAME CODE BBUTY CODE NAME BB Stock
Alignment Centerline County Boundary Township Boundary 0 3,500 7,000 Feet 0 1,066.8 2,133.6 Meters PROJECT LOCATION MAP EAST WHEATFIELD TOWNSHIP ATTACHMENT B PENNSYLVANIA PIPELINE PROJECT SUNOCO LOGISTICS, L.P. INDIANA COUNT
Current drop down plan: SUN purchased 31.6% of Sunoco LLC Closed on April 1, 2015 Drop down is accretive to distributable cash flow to SUN Gross Profit by Channel (2) (1) Reflects all sites supplied by Sunoco LLC, including those operated by Sunoco Inc. (2) LTM 3/31/15 results for 31.6
Pipeline device hardware, Pipeline network, the Pipeline host hardware, the Pipeline application software and the Pipeline media disk storage systems. Each of these components is described below. Pipeline device hardware Pipeline device hardware has up to four independent channels with SDI I/O for capture and play out. The SDI
Page 2 of 22 ODNR‐DSWR Pipeline Standard 12‐3‐13 Pipeline ‐ The pipeline and its related appurtenances. Pipeline Company ‐ The entity responsible for installing the pipeline, its successors, and assigns, on its own behalf and as operator of the company. Right‐of‐Way ‐ Includes the permanent and temporary easements that the pipeline company acquires
and Hazardous Liquid pipeline risk models. Operators establish risk models to address risk and improve safety within their respective pipeline systems. Pipeline risk models are a foundational part of the assessment of operational pipeline risk. Federal pipeline safety integrity management (IM) regulations require pipeline operators to use risk
Page 2 of 22 ODNR‐DSWR Pipeline Standard 12‐3‐13 Pipeline ‐ The pipeline and its related appurtenances. Pipeline Company ‐ The entity responsible for installing the pipeline, its successors, and assigns, on its own behalf and as operator of the company. Right‐of‐Way ‐ Includes the permanent and temporary easements that the pipeline company acquires
Pipeline Conventions DEFINITION: a K-Stage Pipeline(“K-pipeline”) is an acyclic circuit having exactly K registers on everypath from an input to an output. a COMBINATIONAL CIRCUIT is thus an 0-stage pipeline. CONVENTION: Every pipeline stage, hence every K-Stage pipeline, has a register on its OUTPUT(not on its input). ALWAYS:
ONEOK NGL Pipeline, L.L.C. ONEOK Rockies Midstream, LLC Phillips 66 Pipelines LLC Plains Pipeline – Belfield Pipeline Silver Creek Midstream TC Energy / Bison Pipeline Pipeline LLC TC Energy / Northern Border Pipeline Company WBI Energy Midstream WBI Energy Transmission Pipelin
