Certificate Of Accreditation - Tri State Scale

PERRY JOHNSON LABORATORYACCREDITATION, INC.Certificate of AccreditationPerry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:Tri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423(Hereinafter called the Organization) and hereby declares that Organization is accreditedin accordance with the recognized International Standard:ISO/IEC 17025:2005This accreditation demonstrates technical competence for a defined scope and theoperation of a laboratory quality management system(as outlined by the joint ISO-ILAC-IAF Communiqué dated April 2017):Calibration of Mass, Force & Weighing, Mechanical,Dimensional, Thermodynamic, Time & Frequency and Electrical(As detailed in the supplement)Accreditation claims for such testing and/or calibration services shall only be made from addresses referenced within this certificate.This Accreditation is granted subject to the system rules governing the Accreditation referred to above, and the Organization herebycovenants with the Accreditation body’s duty to observe and comply with the said rules.For PJLA:Initial Accreditation Date:June 7, 2005Issue Date:Expiration Date:April 12, 2018July 31, 2020Accreditation No.:59187Tracy SzerszenPresident/Operations ManagerPerry Johnson LaboratoryAccreditation, Inc. (PJLA)755 W. Big Beaver, Suite 1325Troy, Michigan 48084Certificate No.:L18-175The validity of this certificate is maintained through ongoing assessments based on acontinuous accreditation cycle. The validity of this certificate should beconfirmed through the PJLA website: www.pjlabs.comPage 1 of 6

Certificate of Accreditation: SupplementTri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423Robert Schoenau Phone: 815-464-0099Accreditation is granted to the facility to perform the following calibrations:Mass, Force, and Weighing DevicesMEASURED INSTRUMENT,QUANTITY OR GAUGEAnalytical BalancesOPrecision BalancesOHigh Capacity BalancesOBench ScalesOFloor, Tank, CraneScalesOVehicle ScalesORail ScalesOClass F Test WeightsFIssue: 04/2018RANGE OR NOMINALDEVICE SIZE ASAPPROPRIATECALIBRATION AND MEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )1 mg to 200 gRes 0.1 mg1 g to 10 000 gRes 0.01 g5 g to 75 000 gRes 1 g0.005 lb to 500 lbRes 0.001 lb1 lb to 20 000 lbRes 0.1 lb100 lb to 200 000 lbRes 20 lb200 lb to 200 000 lbRes 50 lb50 mg(5.7 x 10-5 1.6 x 10-5Wt) g100 mg200 mg500 mg1g2g3g0.11 mg0.11 mg0.11 mg0.11 mg0.12 mg0.13 mg5g10 g20 g50 g100 g200 g0.16 mg0.26 mg0.48 mg1.2 mg2.3 mg4.6 mgCALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDClass 1 Weight(6.5 x 10-3 2.0 x 10-5Wt) g(4.8 x 10-2 1.9 x 10-5Wt) gClass F Weights(1.3 x 10-4 1.8 x 10-5 Wt) lb(1.8 x 10-2 2.2 x 10-4Wt) lb(12 2.5 x 10-4Wt) lb(54 1.2 x 10-4Wt) lb0.09 mgThis supplement is in conjunction with certificate #L18-175Class 1 WeightsMettler Toledo AT 400Page 2 of 6

Certificate of Accreditation: SupplementTri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423Robert Schoenau Phone: 815-464-0099Accreditation is granted to the facility to perform the following calibrations:Mass, Force, and Weighing DevicesMEASURED INSTRUMENT,QUANTITY OR GAUGERANGE OR NOMINALDEVICE SIZE ASAPPROPRIATECALIBRATION AND MEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )CALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDClass F Test WeightsF500 g1 kg2 kg3 kg5 kg10 kg15 mg27 mg53 mg80 mg130 mg250 mgClass 1 WeightsSartorius FB6CCE20 kg0.001 lb0.002 lb0.005 lb0.01 lb0.02 lb430 mg2.9 x 10-7 lb3.1 x 10-7 lb4.0 x 10-7 lb5.1 x 10-7 lb6.8 x 10-7 lb0.05 lb0.1 lb0.2 lb0.5 lb1 lb2 lb1.7 x 10-6 lb3.6 x 10-6 lb7.1 x 10-6 lb1.8 x 10-5 lb3.6 x 10-5 lb6.1 x 10-5 lb3 lb5 lb10 lb20 lb25 lb50 lb8.7 x 10-5 lb1.5 x 10-4 lb2.8 x 10-4 lb4.2 x 10-4 lb5.0 x 10-4 lb1.3 x 10-3 lb100 lb500 lb0.5 lbf to 250 lbf10 lbf to 10 000 lbf2.3 x 10-3 lb4.7 x 10-3 lb(7.70 x 10-2 7.70 x 10-3 F) lbf(2.50 1.80 x 10-3 F) lbfForce Gauge: TensionFOForce Gauge:CompressionFOIssue: 04/2018This supplement is in conjunction with certificate #L18-175Class 1 WeightsSartorius ISI10Class 2 WeightsMettler Toledo AT400Class 2 WeightsSartorius FB6CCEClass 2 WeightsSartorius ISI10Class 2 WeightsGSE 455Class F WeightsRL 9000 TWM-10kLoad Cell, Class FWeightsPage 3 of 6

Certificate of Accreditation: SupplementTri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423Robert Schoenau Phone: 815-464-0099Accreditation is granted to the facility to perform the following calibrations:MechanicalMEASURED INSTRUMENT,QUANTITY OR GAUGEIndirect Verification ofRockwell HardnessTesters HRBOIndirect Verification ofRockwell HardnessTesters HRCOIndirect Verification ofRockwell HardnessTesters HRCOPressure GaugesTransducers andTransmittersFOTorque Wrenches /DriversFORANGE OR NOMINAL DEVICESIZE AS APPROPRIATECALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )30 HRB to 44 HRB2.2 HRB44 HRB to 70 HRB70 HRB to 100 HRB20 HRC to 39 HRC1.7 HRB1.6 HRB1.4 HRC39 HRC to 60 HRC60 HRC to 70 HRC1.4 HRC0.86 HRC-14.5 psi to 300 psi300 psi to 3 000 psi0.35 psi1.2 psi25 lbf ft to 250 lbf ft250 lbf ft to 500 lbf ft0.91 lbf ft1.9 lbf ftCALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDASTM E 18 andCalibrated RockwellHardness Test BlocksASTM E 18 andCalibrated RockwellHardness Test BlocksDruck DPI 610Druck DPI 705PDCR 2200-2273PDCR 2200-A145.Futek TDF 600DimensionalMEASURED INSTRUMENT,QUANTITY OR GAUGERANGE OR NOMINAL DEVICESIZE AS APPROPRIATECALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )CalipersFO0.05 in to 36 in(110 19L) in Height GaugesFO0.005 in to 24 in(225 32L) inMicrometer OutsideFO0.005 in to 24 in(49 37L) inMicrometer InsideFO0.5 in to 2 in60 µinIndicatorsFOPin GagesFRulesFO0.05 in to 2 in0.011 in to 1 inUp to 39 in580 µin85 µinTapesFOUp to 360 in(32 000 193L) inIssue: 04/2018(9 400 930L) inThis supplement is in conjunction with certificate #L18-175CALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDMitutoyo Gauge Blocks,Mitutoyo LinearStandards, Ring MasterMitutoyo Gauge BlocksMitutoyo LinearStandardsMitutoyo Gauge BlocksMitutoyo LinearStandardsMitutoyo/Ring MasterRing GaugeMitutoyo Gauge BlocksMitutoyo MicrometerMitutoyo Gauge BlocksMitutoyo LinearStandardsMitutoyo Gauge BlocksMitutoyo LinearStandardsPage 4 of 6

Certificate of Accreditation: SupplementTri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423Robert Schoenau Phone: 815-464-0099Accreditation is granted to the facility to perform the following calibrations:ThermodynamicMEASURED INSTRUMENT,QUANTITY OR GAUGERANGE OR NOMINAL DEVICESIZE AS APPROPRIATECALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )ThermometersFOLiquid in GlassDigital ThermometerFO0 C to 300 C1.1 C0 C to 300 C1.2 CRelative HumidityIndicatorsFO10 % RH to 95 % RH1.1 % RHCALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDCL27, RTD Probe, DryBlock, Ice BathCL27, RTD Probe, DryBlock, Ice BathOmega RH 10Time & FrequencyMEASURED INSTRUMENT,QUANTITY OR ter Direct orReflective PickupFORANGE OR NOMINAL DEVICESIZE AS APPROPRIATE10 860 s to 86 400 s20 rpm to 3 000 rpm3 000 rpm to 5 000 rpmCALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )0.7 s(9.63 x 10-2 3.37 x 10-4 R)rpm(1.50 1.90 x 10-4 R) rpmCALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDCole Parmer stopwatchIndirect VerificationAmetek 1965ElectricalMEASURED INSTRUMENT,QUANTITY OR GAUGERANGE OR NOMINAL DEVICESIZE AS APPROPRIATECALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )Temperature CalibrationIndication and ControlEquipment used withThermocouple Type EO-230 C to 1 000 C0.60 CTemperature Calibration IIndication and ControlEquipment used withThermocouple Type JOTemperature CalibrationIndication and ControlEquipment used withThermocouple Type KOTemperature CalibrationIndication and ControlEquipment used withThermocouple Type TO-210 C to 1 000 C0.62 C-200 C to 1 371 C0.67 C-200 C to 400 C0.69 CIssue: 04/2018This supplement is in conjunction with certificate #L18-175CALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDElectrical Simulation ofThermocouple OutputOmega CL-27Page 5 of 6

Certificate of Accreditation: SupplementTri State Scale Systems and Calibration Services, Inc.191 Ontario Street, Frankfort, IL 60423Robert Schoenau Phone: 815-464-0099Accreditation is granted to the facility to perform the following calibrations:ThermodynamicMEASURED INSTRUMENT,QUANTITY OR GAUGERANGE OR NOMINAL DEVICESIZE AS APPROPRIATECALIBRATION ANDMEASUREMENTCAPABILITY EXPRESSEDAS AN UNCERTAINTY ( )Temperature CalibrationIndication and ControlEquipment used withRTD 100 Pt 385O-200 C to 850 C0.66 CTemperature CalibrationIndication and ControlEquipment used withRTD 1 000 Pt 385O-200 C to 850 C0.61 CCALIBRATIONEQUIPMENTAND REFERENCESTANDARDS USEDElectrical Simulation of RTDOutputOmega CL-271.The CMC (Calibration and Measurement Capability) stated for calibrations included on this scope ofaccreditation represents the smallest measurement uncertainty attainable by the laboratory when performinga more or less routine calibration of a nearly ideal device under nearly ideal conditions. It is typicallyexpressed at a confidence level of 95 % using a coverage factor k (usually equal to 2). The actual measurementuncertainty associated with a specific calibration performed by the laboratory will typically be larger thanthe CMC for the same calibration since capability and performance of the device being calibrated and theconditions related to the calibration may reasonably be expected to deviate from ideal to some degree.2. The laboratories range of calibration capability for all disciplines for which they are accredited is the intervalfrom the smallest calibrated standard to the largest calibrated standard used in performing the calibration.The low end of this range must be an attainable value for which the laboratory has or has access to thestandard referenced. Verification of an indicated value of zero in the absence of a standard is common practicein the procedure for many calibrations but by its definition it does not constitute calibration of zero capacity.3. The presence of a superscript O means that the laboratory performs calibration of the indicatedparameteronsite at customer locations. Example: Outside MicrometerO would mean that the laboratoryperforms this calibration onsite at the customer’s location.4. The presence of a superscript FO means that the laboratory performs calibration of the indicatedparameterboth at its fixed location and onsite at customer locations. Example: Outside MicrometerFO wouldmean that the laboratory performs this calibration at its fixed location and onsite at customer locations.5. The presence of a superscript F means that the laboratory performs calibration of the indicated parameter atits fixed location. Example: Outside MicrometerF would mean that the laboratory performs this calibrationat its fixed location.6. Measurement uncertainties obtained for calibrations performed at customer sites can be expected to be largerthan the measurement uncertainties obtained at the laboratories fixed location for similar calibrations. Thisis due to the effects of transportation of the standards and equipment and upon environmental conditions atthe customer site which are typically not controlled as closely as at the laboratories fixed location.7. The term L represents measured length in inches.8. The term R represents rate of revolution in rpm.9. The term F represents applied force in units appropriate to the uncertainty statement.10. The term Wt represents weight in pounds or grams (including SI multiple and submultiple units) appropriateto the uncertainty statement.Issue: 04/2018This supplement is in conjunction with certificate #L18-175Page 6 of 6

Micrometer OutsideFO 0.005 in to 24 in (49 37L) in Mitutoyo Gauge Blocks Mitutoyo Linear Standards Micrometer InsideFO 0.5 in to 2 in 60 µin Mitutoyo/Ring Master Ring Gauge IndicatorsFO 0.05 in to 2 in 580 µin Mitutoyo Gauge Blocks Pin GagesF 0.011 in to 1 in 85 µin Mitutoyo Micrometer RulesFO Up to 39 in (9 400 930L) in Mitutoyo Gauge .