Jabra Speak 710 User Manual

JabraSpeak 710User manual

2017 GN Audio A /S. All rights reserved. Jabra is atrademark of GN Audio A/S. The Bluetooth word mark andlogos are registered trademarks owned by the BluetoothSIG, Inc. and any use of such marks by GN Audio A/S is underlicense.Designed and engineered in DenmarkMade in ChinaMODEL: PHS040W / END040WDeclaration of Conformity can be found onwww.jabra.com/CP/US/declarations-of-conformity

3.1 Small Meeting Room3.2 Large Meeting RoomENGLISH1. Welcome.52. Overview.63. Where To Position.73.3 Desk3.4 Stereo Media4. How To Charge. 114.1 Usb Charging4.2 Automatic Power Off4.3 Battery Status5. How To Connect. 135.1 Connect To Pc (Bluetooth)5.2 Connect To Pc (Usb Cable)5.3 Connect To Smartphone6. How To Use . 156.1 Button Visibility6.2 Typical Use6.3 Multiple Call Handling6.4 Link Button6.5 Smart Button6.6 Voice Guidance6.7 Shared Use6.8 Factory ResetJabra Speak 7103

7.1 Jabra Direct7.2 Update Firmware8. Support. 248.1 Faq And Technical SpecificationsENGLISH7. Software. 228.2 How To Care For Your Jabra DeviceJabra Speak 7104

Thank you for using the Jabra Speak 710.We hope you will enjoy it!Jabra Speak 710 featuresENGLISH1. Welcome Immersive sound for calls and music Intuitive plug and play connectivity - connectto laptop, smartphone and tablet via USB orBluetooth Lightweight design, protective travel pouch,and 15 hours of battery life Flexible and scalable for small and largemeetings Interact with your voice assistant with theone touch Smart button Certified for Avaya, Cisco and Skype forBusiness for a plug-and-play experienceJabra Speak 7105

MuteBluetoothBattery statusVolumedownVolume upLink buttonSmart buttonAnswer callPower on/offENGLISH2. OverviewEnd calljabraabrjaUSB cableTable standJabra Speak 710Jabra Link 3706

3.1 Small meeting roomPosition the speakerphone in the center of thetable, up to 2m/6ft from each participant. Asingle Jabra Speak 710 is ideal for up to 6people.ENGLISH3. Where to position2m/6ftJabra Speak 7107

For large meetings of up to 12 people in asingle room, position two Jabra Speak 710’s ateither end of the table to ensure all participantsin the meeting be heard clearly.ENGLISH3.2 Large meeting room2m/6ftTo temporarily link the audio between twoJabra Speak 710’s, press the Link button onboth speakerphones when they are within2m/6ft.max 2 m/6 ftjabrajabraJabra Speak 7108

When using the Jabra Speak 710 at your desk itis recommended to put the speakerphone intoan upright position using the table stand. Thiswill better direct the audio towards you.Jabra Speak 710ENGLISH3.3 Desk9

If you are presenting or viewing stereomultimedia, two Jabra Speak 710’s can bepositioned on either side of a projector ordisplay for automatic stereo sound.ENGLISH3.4 Stereo mediaTo temporarily link the audio between twoJabra Speak 710’s, press the Link button onboth speakerphones when they are within2m/6ft.max 2 m/6 ftjabrajabraJabra Speak 71010

4.1 USB chargingPlug the Jabra Speak 710 into a USB powersource using the attached USB cable. The JabraSpeak 710 battery lasts for up to 15 hours oftalk time and takes approx. 3 hours to fullycharge.ENGLISH4. How to chargejabra4.2 Automatic power offTo preserve battery while unplugged, the JabraSpeak 710 will automatically power off when ithas not been connected to a bluetooth devicefor 15 minutes.If connected to a bluetooth device andunplugged, it will automatically power off after8 hours.Jabra Speak 71011

To view the current battery status, press theBattery status button. The LEDs around theedge of the Jabra Speak 710 will light up toindicate the current battery status.ENGLISH4.3 Battery statusMedium batteryLow batteryJabra Speak 71012

5.1 Connect to PC (Bluetooth)Plug the Jabra Link 370 into a USB port on yourPC. The Jabra Speak 710 and the Jabra Link 370are pre-paired and ready to use out of the box.The bluetooth range is 30m.ENGLISH5. How to connect3 0m/100 ftjabraabrjaFor the Jabra Speak 710 to work correctly youmay need to set the Jabra Link 370 as theplayback device in your operating system’saudio settings.To manually pair the Jabra Speak 710 with theJabra Link 370, please use Jabra Direct.Jabra Speak 71013

Plug the Jabra Speak 710 into a USB port onyour PC. You may need to set the Jabra Speak710 as the playback device in your operatingsystem’s audio settings.ENGLISH5.2 Connect to PC (USB cable)jabra5.3 Connect to smartphoneHold the Bluetooth button for 2 seconds andfollow the voice-guided instructions to pair toyour smartphone. The bluetooth range is 10m.10 m/30 ftjabraTo disconnect or reconnect,Bluetooth button again.Jabra Speak 710pressthe14

MuteBluetoothBattery statusVolumedownVolume upLink buttonSmart buttonAnswer callPower on/offENGLISH6. How to useEnd call6.1 Button visibilityThe buttons are backlit and only visible whenthe speakerphone is powered on. After 1minute of inactivity the buttons will fade, andcan be reactivated by tapping the area wherethe buttons are located.The Smart button, Link button, and Mutebutton will only be visible under certainconditions (e.g. the Link button is only visiblewhen the Jabra Speak 710 is in close promixityto another Jabra Speak 710).Jabra Speak 71015

WHATHOWPower on or offHold (1 sec) the PowerbuttonAnswer callPress the Answer call buttonEnd or rejectcallPress the End call buttonTurn on/offvoice guidanceHold (8 secs) the End callbuttonVolume up/downPress (or hold) the Volumeup or Volume down buttonMute/unmutemicrophonePress the Mute buttonBattery statusPress the Battery statusbuttonConnectBluetoothdevicePress the Bluetooth statusbuttonJabra Speak 710ENGLISH6.2 Typical use16

HOWLink two JabraSpeak 710’sPress the Link button (onlyvisible when within 2m/6ftrange of another Jabra Speak710)Voice assistant(Smartphones)Press the Smart button (onlyvisible when connected to asmartphone)Speed dial(off by default)Press the Smart button (useJabra Direct to enable speeddial)ENGLISHWHAT6.3 Multiple call handlingWHATHOWPut current call on holdand answer incoming callPress the Answercall buttonSwitch between held calland active callPress the Answercall buttonReject incoming call, andcontinue current callPress the End callbuttonJabra Speak 71017

To temporarily link the audio between twoJabra Speak 710’s, press the Link button onboth speakerphones when they are within2m/6ft. The Link button will only be visiblewhen two Jabra Speak 710’s are within 2m/6ft.ENGLISH6.4 Link buttonmax 2 m/6 ftjabrajabraTo unlink the speakerphones, press the Linkbutton on one of the speakerphones.NOTE If two bluetooth devices are connected to the JabraSpeak 710, the last connected Bluetooth device will bereplaced by the temporary link.Jabra Speak 71018

By default, the Smart button will activate yoursmartphone’s voice assistant (Siri , GoogleNow , Cortana ). However, if you wouldprefer the Smart button to instead speed dial aphone number on your Smartphone or PC, thiscan be configured using Jabra Direct.ENGLISH6.5 Smart buttonjabra6.6 Voice guidanceThe voice guidance can be turned on or off byholding the End call button for 8 seconds.jabraJabra Speak 71019

If the Jabra Speak 710 is to be shared by manyusers, it is recommended to enable Shared usein Jabra Direct. When Shared use is enabled,the speakerphone will not automaticallyconnect to a previously connected Smartphoneor Jabra Link 370.ENGLISH6.7 Shared useTo connect to a smartphone or Jabra Link 370,press the Bluetooth button on thespeakerphone and follow the voice-guidedinstructions.NOTE When Shared mode is enabled, you will need to repair to your smartphone or Jabra Link 370.Jabra Speak 71020

Resetting the Jabra Speak 710 clears the list ofpaired Bluetooth devices and also clears allpersonalized settings. After a factory reset, it isnecessary to re-pair the Jabra Speak 710 toyour Bluetooth devices or Jabra Link 370.ENGLISH6.8 Factory resetTo factory reset, hold the Answer call buttonand the End call button for 8 seconds until‘Factory reset’ is announced by thespeakerphone.jabraJabra Speak 71021

7.1 Jabra DirectJabra Direct is PC software designed tosupport, manage and enable optimalfunctionality for Jabra devices.ENGLISH7. SoftwareDownload the latest version from jabra.com/directJabra Speak 71022

Firmware updates improve performance oradd new functionality to Jabra devices.1. Connect the Jabra Speak 710 to a PC usingthe USB cable or Jabra Link 370.2. Install Jabra Direct on your PC.3. Use Jabra Direct to check for the latestfirmware updates.Jabra Speak 710ENGLISH7.2 Update firmware23

8.1 FAQ and technical specificationsView the FAQ, certifications, and technicalspecifications at jabra.com/speak710ENGLISH8. Support8.2 How to care for your Jabra device The Jabra Speak 710 is for indoor use only. Avoid storage at extreme temperatures(above 65 C/149 F or below -40 C/-40 F). Do not expose the Jabra Speak 710 to rain orother liquids. Do not cover the Jabra Speak 710 withstickers or labels.Jabra Speak 71024

ENGLISHREV Bwww.jabra.com/speak710Jabra Speak 71025

Plug the Jabra Speak 710 into a USB power source using the attached USB cable. The Jabra Speak 710 battery lasts for up to 15 hours of talk time and takes approx. 3 hours to fully charge. jabra. 4.2 Automatic power off. To preserve battery while unplugged, the Jabra Speak