COMPACT Pendant Arm Series 2
Mounting Options COMPACT Pendant Arm Series 2HMI - Human-Machine InterfaceMounting OptionsCOMPACT Pendant Arm Series 2Spec-00350G763.422.2211763.422.2600COMPACT Pendant Arm Series 2, Type 12APPLICATIONCOMPACT Series 2 Pendant Arms allow operators to easily movecontrols into and out of position as needed, and they are easilymounted to a machine, wall or floor. Offering both superior loadbearing capacity and functional reliability, the COMPACT Series 2Pendant Arm has a maximum load of 101 lb. (45.8 kg) at 3.3 ft. (1 m)and is recommended for use with INLINE , CC2000, CC4000 andCONCEPT HMI enclosures as well as Consolets.SPECIFICATIONS ast aluminum couplings and extruded aluminum tubing. SeriesCcomponents provide excellent structural strength. Multiple coupling types and three standard tube lengths (500,1000 and 1500 mm) combine to form numerous configurations asconduits for equipment wiring (see configuration guide) Removable access plates simplify cable installation inside fittings Heavy duty bearings in all movable joints for convenient, smoothoperation and enhanced durability Deep tube fittings in all couplings Adjustable set screws allow accurate alignment of supportingtubes Oil-resistant neoprene gasketFINISHCouplings and access plates have RAL 7035 light-gray polyesterpowder paint finish. Tubing is anodized aluminum.INDUSTRY STANDARDSNEMA/EEMAC Type 12IEC 60529, IP55DIN 40050Standard Cutout for MountingDimensions for CutoutØDEFØGSet-Up Jointin./mm1.58403.54903.54900.359Vertical or Horizontal Wall Jointin./mm2.76703.54904.331100.359Flange or Flange Elbow Coupling/Swivel Tilt Straight or 90 Elbowin./mm1.58402.36602.36600.267Wall Flange or Base Bracketin./mm——3.54903.54900.359Rotational Basein./mm1.58403.54903.54900.359See product drawings for alternate shallow enclosure mounting.1HMI - Human-Machine InterfaceSUBJECT TO CHANGE WITHOUT NOTICEEQUIPMENT PROTECTION SOLUTIONSSpec-00350 G
Mounting Options COMPACT Pendant Arm Series 2System Load CapacityThe Series 2 pendant arm load graph is the result of load capacity tests. Please contact Hoffman for specific application information.EQUIPMENT PROTECTION SOLUTIONSSpec-00350 GPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMHMI - Human-Machine Interface2
Mounting Options COMPACT Pendant Arm Series 2TubesHollow aluminum extrusionavailable in 500-, 1000- and1500-mm lengths. Connectioncomponents fastened to supportarm with set screws. DIN 59411 and2395.Bulletin: CS4Catalog NumberCCS2T5CCS2T10CCS2T20AxBxC in./mm19.68 x 1.77 x 2.36500 x 45 x 6039.37 x 1.77 x 2.361000 x 45 x 6059.06 x 1.77 x 2.361500 x 45 x 60Set-Up l Dimensionsin./mm1.77 x 2.3645 x 601.77 x 2.3645 x 601.77 x 2.3645 x 60Wall Thickness Dimensionsin./mm0.3180.3180.318Joint includes access plate for easywire installation. Turning rangeof 300 degrees. Cast aluminumwith RAL 7035 light-gray polyesterpowder paint finish. Setscrews,gasket and removable access plateincluded. Mounting fasteners arenot provided.Catalog NumberCCS2SJLGInside Cross Section (cm2)12.65Inside Cross Section (in.2)1.96Weight (lb.)4.512.651.969.012.651.9614.0Weight (lb.)4.0Bulletin: CS43HMI - Human-Machine InterfaceSUBJECT TO CHANGE WITHOUT NOTICEEQUIPMENT PROTECTION SOLUTIONSSpec-00350 G
Mounting Options COMPACT Pendant Arm Series 2Wall Joint (Vertical)Vertical joint includes accessplate for easy wire installation.Turning range of 300 degrees. Castaluminum with RAL 7035 lightgray polyester powder paint finish.Setscrews, gasket and removableaccess plate included. Mountingfasteners are not provided.Catalog NumberCCS2WJVLGWeight (lb.)5.0Catalog NumberCCS2WJHLGWeight (lb.)5.0Catalog NumberCCS2IJLGWeight (lb.)5.0Bulletin: CS4Wall Joint (Horizontal)Includes access plates for easy wireinstallation. Turning range of 300degrees. Cast aluminum with RAL7035 light-gray polyester powderpaint finish. Setscrews, gasket andremovable access plates included.Mounting fasteners not provided.Bulletin: CS4Intermediate JointJoint is cast aluminum with RAL7035 light-gray polyester powderpaint finish. Turning range is 360degrees with stop. Includes accessplates for easy wire installation,installation hardware and gasket.Use of the intermediate jointreduces pendant arm load capacityby 43 percent.Bulletin: CS4EQUIPMENT PROTECTION SOLUTIONSSpec-00350 GPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMHMI - Human-Machine Interface4
Mounting Options COMPACT Pendant Arm Series 2Heavy Duty ElbowElbow is made of aluminum withincreased wall thickness foradditional strength and support.Setscrews for tube adjustment. Castaluminum with RAL 7035 light-graypolyester powder paint finish. Allinstallation hardware and gasketincluded.Catalog NumberCCS2EHDLGWeight (lb.)3.0Catalog NumberCCS2FCLGWeight (lb.)2.5Catalog NumberCCS2FC15LGProduct Weight (lb.)2.5Bulletin: CS4Flange CouplingCoupling can rotate 300 degrees.Maintenance-free bearing is steeland polyamide. Cast aluminumwith RAL 7035 light-gray polyesterpowder paint finish. Installationhardware, mounting fasteners andgasket included.Bulletin: CS4Flange Coupling, 15-DegreeCoupling can rotate 300 degrees.Maintenance-free bearing issteel and polyamide. Enclosureis mounted at a 15-degree inclineangle. Cast aluminum with RAL7035 light-gray polyester powderpaint finish. Installation hardware,mounting fasteners and gasketsincluded.Bulletin: CS45HMI - Human-Machine InterfaceSUBJECT TO CHANGE WITHOUT NOTICEEQUIPMENT PROTECTION SOLUTIONSSpec-00350 G
Mounting Options COMPACT Pendant Arm Series 2Flange Elbow CouplingTurning range of 300 degrees.Maintenance-free bearing is steeland polyamide. Includes accessplate for easy wire installation. Castaluminum finished in RAL 7035light-gray polyester powder paint.Installation hardware, mountingfasteners and gasket included.Catalog NumberCCS2FECLGWeight (lb.)3.0Catalog NumberCCS2FEC15LGProduct Weight (lb.)3.1Catalog NumberCCS2WFBLGWeight (lb.)2.5Bulletin: CS4Flange Elbow Coupling, 15-DegreeTurning range of 300 degrees.Maintenance-free bearing issteel and polyamide. Access plateincluded for easy wire installation.Enclosure is mounted at a 15-degreeincline angle. Cast aluminumfinished in RAL 7035 light-graypolyester powder paint. Installationhardware, mounting fasteners andgaskets included.Bulletin: CS4Base Bracket/Wall FlangeCast aluminum with RAL 7035light-gray polyester powder paintfinish. Set screws and gasket areincluded. Mounting fasteners arenot provided.Bulletin: CS4EQUIPMENT PROTECTION SOLUTIONSSpec-00350 GPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMHMI - Human-Machine Interface6
Mounting Options COMPACT Pendant Arm Series 2Rotational BaseTurning range of 300 degrees.Cast aluminum finished in RAL7035 light-gray polyester powderpaint. Setscrews and gasket areincluded. Mounting fasteners arenot provided.Catalog NumberCCS2RBLGWeight (lb.)3.5Catalog NumberCCS2RBBLGProduct Weight (lb.)2.7Catalog NumberCCS2RBB15LGProduct Weight (lbs.)2.7Bulletin: CS4Rotational Base BracketTurning range of 300 degrees.Cast aluminum finished in RAL7035 light-gray polyester powderpaint. Setscrews and gaskets areincluded. Mounting fasteners arenot provided.Bulletin: CS4Rotational Base Bracket, 15-DegreeTurning range of 300 degrees.Enclosure is mounted at a 15-degreeincline angle. Cast aluminumfinished in RAL 7035 light-graypolyester powder paint. Setscrewsand gaskets are included. Mountingfasteners are not provided.Bulletin: CS47HMI - Human-Machine InterfaceSUBJECT TO CHANGE WITHOUT NOTICEEQUIPMENT PROTECTION SOLUTIONSSpec-00350 G
Mounting Options COMPACT Pendant Arm Series 2Swivel Tilt StraightMounts between pendant arm andHMI enclosure to provide both swiveland tilt options for the machineoperator. Swivel allows 300-degreemaximum rotation. Tilt allowsinfinite adjustment from horizontalto 30 degrees. Cast aluminumfinished in RAL 7035 light-graypolyester powder paint. Installationhardware, mounting fasteners andgasket included.Maximum load is 66 lb. (30 kg).Catalog NumberCCS2STLGWeight (lb.)7.0Catalog NumberCCS2ESTLGWeight (lb.)7.5Bulletin: CS4Swivel Tilt 90-Degree ElbowMounts between pendant arm andHMI enclosure to provide both swiveland tilt options for the machineoperator. A 90-degree elbow isincorporated into this design. Swivelallows 300-degree maximumrotation. Tilt allows infiniteadjustment from horizontal to 30degrees. Cast aluminum finishedin RAL 7035 light-gray polyesterpowder paint. Installation hardware,mounting fasteners and gasket areincluded.Maximum load is 66 lb. (30 kg).Bulletin: CS4EQUIPMENT PROTECTION SOLUTIONSSpec-00350 GPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMHMI - Human-Machine Interface8
Mounting Options COMPACT Pendant Arm Series 2Pedestal BaseBase is cast aluminum one-piececonstruction finished with RAL 7035light-gray textured polyester powderpaint. Includes all hardware forattaching tubes.Catalog NumberCCS2PBBulletin: CC3Monitor PlatformPlatform attaches to pendant armto provide a surface for a monitor.Adjustable stops hold monitorsecurely in place. Aluminumconstruction finished with RAL 7042gray polyester powder paint. OrderMonitor Platform, Keyboard Trayand Keyboard Frame separately.Catalog NumberCCS1MPDescriptionMonitor Platform (Does not include Keyboard Frame or Keyboard Tray)Catalog NumberCCS1KBFDescriptionKeyboard Frame onlyCatalog NumberCCS1KBTDescriptionKeyboard Tray onlyBulletin: CS4Keyboard FrameMounts to monitor platform.Frame locks at desired position bytightening knobs. Chrome platedfinish. Order Monitor Platform,Keyboard Tray and Keyboard Frameseparately.Bulletin: CS4Keyboard TrayTray attaches to keyboard frame.Provides a surface for a PC mouseas well as a platform for a keyboard.Aluminum construction finished withRAL 7042 gray polyester powderpaint. Order Monitor Platform,Keyboard Tray and Keyboard Frameseparately.Bulletin: CS49HMI - Human-Machine InterfaceSUBJECT TO CHANGE WITHOUT NOTICEEQUIPMENT PROTECTION SOLUTIONSSpec-00350 G
mounting options compact pendant arm series 2Mounting Options COMPACT Pendant Arm Series 2Hmi-Human-macHine interfacemounting optionscompact pendant arm series 2763.422.2211763.422.2600Spec-00351FCOMPACT PendantArm Series2 Configurationscompact pendantarm series2 configurations1DescriptionQty.Catalog NumberSet up joint1ccs2slgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberWall joint (horizontal)1ccs2wjhlgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt orFlange coupling talog NumberSet up joint1ccs2sjlgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberWall flange/base bracket1ccs2wfblgFlange elbow coupling or90º Swivel tilt orFlange elbow coupling .Catalog NumberWall flange/base bracket1ccs2wfblgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberSet-up joint1ccs2sjlgFlange elbow coupling or90º Swivel tilt11ccs2feclgccs2estlgDescriptionQty.Catalog NumberWall joint (horizontal)1ccs2wjhlgFlange elbow coupling or90º Swivel tilt11ccs2feclgccs2estlgDescriptionQty.Catalog NumberWall joint (vertical)1ccs2wjvlgFlange coupling orSwivel tilt11ccs2fclgccs2stlg2 and 34 and 567 and 8910 and 1112 and 131Hmi-Human-macHine interfaceEQUIPMENT PROTECTION SOLUTIONSSpec-00350 GSUBJECT TO CHANGE WITHOUT NOTICEPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMEQUIPMENT PROTECTION SOLUTIONSSpec-00351 FHMI - Human-Machine Interface10
Mounting Options COMPACT Pendant Arm Series 2mounting options compact pendant arm series 214DescriptionQty.Catalog NumberRotational base1ccs2rblgHeavy duty elbow2ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberSet up joint1ccs2sjlgIntermediate joint1ccs2ijlgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberWall Joint (horizontal)1ccs2wjhlgIntermediate joint1ccs2ijlgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlgDescriptionQty.Catalog NumberSet up joint1ccs2sjlgIntermediate joint1ccs2ijlgFlange elbow coupling or90º Swivel tilt11ccs2feclgccs2estlgDescriptionQty.Catalog NumberWall joint (horizontal)1ccs2wjhlgIntermediate joint1ccs2ijlgFlange elbow coupling or90º Swivel tilt11ccs2feclgccs2estlgDescriptionQty.Catalog NumberWall flange/base bracket1ccs2wfblgHeavy duty elbow1ccs2ehdlgFlange coupling orSwivel tilt11ccs2fclgccs2stlg1516 and 171819 and 2021 and 22Note to the Specifier:1. Select pendant system sizing using the COMPACT Series 2 load capacity chart.2. Tube catalog numbers are not included in configuration tables.11 PROTECTIONHMI - Human-MachineTO CHANGEWITHOUT NOTICEEQUIPMENTSOLUTIONS InterfacePH 763.422.2211SUBJECT FAX 763.422.2600 HOFFMANONLINE.COMSpec-00351 FEQUIPMENTPROTECTION 2SOLUTIONSHmi-Human-macHineinterfaceSpec-00350 G
Mounting Options COMPACT Pendant Arm Series 2NotesEQUIPMENT PROTECTION SOLUTIONSSpec-00350 GPH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COMHMI - Human-Machine Interface12
COMPACT Series 2 Pendant Arms allow operators to easily move controls into and out of position as needed, and they are easily mounted to a machine, wall or floor. Offering both superior load-bearing capacity and functional reliability, the COMPACT Series 2 Pendant Arm
new york R12 500 ninety R9750 1 2. monaco 1 R12 500. tilt desk lamp dimmable integral led black / white R1250 . talk white / anthracite grok R1150 loong pendant R650 darling pendant white glass R1150 para cone 30 pendant . desi outdoor ceiling light R760 1 1 8. CUMULUS PENDANT SMALL / LARGE R350 R420 OUTLINE PENDANT GOLD BLACK / CHROME
Reference Material §ARM ARM(“Architecture Reference Manual ”) §ARM DDI 0100E covers v5TE DSP extensions §Can be purchased from booksellers - ISBN 0-201-737191 (Addison-Wesley) §Available for download from ARM’swebsite §ARM v7-M ARM available for download from ARM’swebsite §Conta
(Dual-Monitor Arm, Single Monitor Arm, Monitor Arm Laptop Stand) If your monitor is too heavy (arm won't stay up) or too light (arm won't stay down), you need to . adjust the spring arm tension to hold them at the right height. Insert the long M6 Allen Wrench that came with your Monitor Arm into the . opening to adjust the tension bolt.
Trx arm workouts pdf. Trx band arm workout. Trx full arm workout. Trx chest and arm workout. Trx shoulder and arm workout. Trx arm workout video. Trx arm workout youtube. Whether you're looking for TRX exercises for beginners or a more advanced TRX workout plan, these moves have something for everyone. "The pike is a personal favorite of mine!"
Clear SD530-PG-E1 Pendant, Environmental, Pressurized* Grey Smoked SD530-PRE0 Clear SD530-PRE1 Pendant, Environmental, Stainless Steel* Grey Clear SD530-PSGE1 Back Box Dome Drive Lower Drive BB4-F In-ceiling indoor DD530 Day/Night (NTSC/PAL) camera (30X) LDHQF-0 Smoked, surface, white BB4-PG Pendant mount, grey LDHQPB-0 Smoked, pendant, black .
-1 personne année correspond à la durée de suivi de : –1 personne non-malade pendant 1 an. Si cette personne n’est pas malade pendant l’année de suivi, elle aura été susceptible de produire un nouveau cas de maladie pendant 1 an. –2 personnes non-malades pendant 6 mois. Il pourrait s’agir de personnes décédées au bout de 6 mois de suivi.
Puritan Bennett 980 Pendant Ventilator PENDANT CHARACTERISTICS Pendant base dimensions 14.7” width x 15.5” depth x 22.5” height (37 cm width x 39 cm depth x 57 cm height) Pendant base weight 76 lb (34.5 kg) including BDU, GUI, and primary battery; 60 lb (27.2 kg) for BDU only Graphical user interface dimensions 15” (38.1 cm) screen
November 2014 HR: Getting smart about agile working WORK WORKFORCE WORKPLACE in association with . Championing better work and working lives The CIPD’s purpose is to champion better work and working lives by improving practices in people and organisation development, for the benefit of individuals, businesses, economies and society. Our research work plays a critical role – providing the .
