AT UHD H2H-88M Guide - Atlona

1y ago
16 Views
2 Downloads
1.83 MB
6 Pages
Last View : 2m ago
Last Download : 2m ago
Upload by : Casen Newsome
Transcription

8x8 4K/UHD HDMI to HDMIMatrix SwitcherAT-UHD-H2H-88M Installation GuidePlease check http://www.atlona.com/product/AT-UHD-H2H88M for the most recent firmware update or manual.The Atlona 8x8 4K/UHD HDMI to HDMI Matrix Switcher is designed for the best audio, video,and control experience. Pass through of video up to 4K/UHD or 2560x2048, audio up to Dolby TrueHD, DTS-HD Master Audio , or Dolby Atmos , and multiple control options (such as TCP/IP, RS-232, IR, front panel, and WebGUI) enables the UHD-H2H-88M to provide the highest qualityexperience no matter if playing a movie, giving a presentation, and more.Package Contents 1 x AT-UHD-H2H-88M 1 x 5 pin captive screw female connectorIR: 2 pin, RS-232: 3 pin 1 x 12V DC power supply 1 x IEC C13 power cable 1 x IR Remote control 1 x Pair of rack mount ears 1 x Installation Guideatlona.comToll free: 1-877-536-3976Local: 1-408-962-0515

Panel DescriptionFront Panel445768132d123478ENTER56FNCCANCELEDIDINFOab2 3132cPOWERAT-UHD-H2H-88M15456LAN7FWRS-23286IR INSRX TX1. IR Receiver Window - Receives the signal from the included IR Hand Held Remote Control or 3rdparty controller2. Function (FNC) Button - Select for command options. (blue backlight when selected)a. EDID Button: Save/Load EDIDs to individual inputsb. INFO Button: Displays the firmware, IP, and MAC addressc. 1 Button: Save a single input to all the outputs with this functiond. 2 Button: View additional matrix RS-232 baud information3. Cancel Button - Within the function menu use this button to go back one screen or to return tothe home screenHDMI INDC 12VHDMI OUTNote: You cannot power off or change functions unless you return to the home screen4. Power Button - Cycles the power between On (blue backlight) or Standby (red backlight) mode5. Enter Button - Use to view current status for inputs and outputs or to confirm a command6. Number buttons - Use these buttons to select input and output paths or use with the functionbutton to change matrix settingsBack DINFO32RS-23212345671823HDMI IN4567LANRX TXIR INSDC 12VHDMI OUT54FW861. LAN port - Connect to a network for TCP/IP, WebGUI and firmware updates2. FW port - USB not enabled at this time for future functionality3. Main control - Connect IR or RS-232 control system to the matrix4. HDMI Input - Connect HDMI sources to these portsEx. DVD players, Blu-ray players, computers, game consoles, etc5. HDMI outputs - Connect to HDMI displays or HDBaseT extender sets (for extended zone support)Ex. AT-UHD-EX-100CE-KIT, AT-UHD-EX-70C-KIT, or AT-UHD-EX-70-KIT6. Internal power supply - Connect included 12V power supply from here to a power outlet.atlona.com2Toll free: 1-877-536-3976Local: 1-408-962-0515

Rack OENTERCANCEL12345678EDIDINFOTo rack mount the UHD-H2H-88M unit: use the rack mount ears, the 4 screws from the sides ofthe UHD-H2H-88M, and 4 rack screws.To affix the rack mount ears, remove the two screws on each side of the UHD-H2H-88M and affixthe rack ears to the UHD-H2H-88M (as shown in the picture above).Place the UHD-H2H-88M in the rack, lining the holes in the rack ears with the holes in the rack.Once placed, use the rack screws to keep the unit in place. (as shown in the picture to the left).Note: Increase the air flow as needed to maintain the recommended temperature inside the rack.Note: Do not exceed maximum weight loads for the rack. Install heavier equipment in the lower part of the rack forstability.Category Cable and ConnectorFor the category cables used in the installation of these products, please be sure to use a 568Btermination as pictured below:Important! 4K (UHD) signals are sensitive to cable quality and installation technique. It is recommended touse CAT6a/7 solid core cables for best results.Connector type and size is very important to ensure extenders work correctly. Please use thematching cable type with the correct RJ45 connector. (e.g. CAT 7 cable should use a CAT 7 connector)atlona.com3Toll free: 1-877-536-3976Local: 1-408-962-0515

Captive ScrewThe captive screw connectors allow you to cut cables to a suitable length, reducing cable clutterwhile providing a more reliable connection.ConnectingWhen connecting the cables to the female captive screw connector it is important that the wires beterminated correctly. The female captive screw connector has a contact plate at the top and musthave the wires touching it for signal to pass. When wired correctly (see picture A) the signal will pass,incorrectly (see picture B) no signal will pass.AThe captive screw connectors havea contact bar that is adjusted tocompress the wire against the topcontact plate. Use the screws at thetop of the connector to compressthe wire against the contact plate.BCounterClockwiseClockwiseTurn the screws clockwise toraise the contact bar to theupper contact plate and holdthe wires in place.Turn the screws counterclockwise to lower thecontact bar to release thewires.RS-232RS-232 captive screw connector is included. RS-232 pin out will be determined by the RS-232 cableand will connect as Rx (receiver), Tx (transmitter), and (ground). (See picture 1)1RS-2325 4 3 2 1Typical pin out:2 - TX - Transmitter3 - RX - Receiver5 - GND - Ground9 8 7 6Pin out color will differper RS-232 cable.IRIR pin out will bedetermined by the IR cableand will connect as(ground), and S (signal)SIR INThere are two wires on the optional IR captive screw ready cable (AT-LC-CS-IR-2M sold separately): signaland ground. The signal wire is red and ground wire is black. The IR cable will plug into the IR INports and connect to third party control systems.One side of the optional IR cable is markedto differenciate pin outs.atlona.comS4Signal (S)Ground ( )Toll free: 1-877-536-3976Local: 1-408-962-0515

EthernetFor convenience, the UHD-H2H-88M comes with DHCP on. This enables the matrix to beconnected to a network without knowing available IP addresses. If your network does not allowdynamic IP addresses or if you are using the matrix with a TCP/IP control system, this feature maybe turned off and the IP address set using RS-232 commands or AMS.To disable DHCP, use the following command: IPDHCP off. Once disabled, set the IP address usingthe IPStatic command (e.g. IPStatic 192.168.1.56).Connection Blu-ray H-88MSet top boxGame ConsoleIR INRS-232Game Console1324576183245HDMI IN6LAN7FWDC 12VVideo2.4135246HDMICOMPONENTWIFI 1DIGITALCOAX OUTeSATAL234SERIAL 1TCP/IPVIDEO OUTAUDIO OUTAUDIO EX-100CE-TXPOWER2SERIAL 21RGNDSIG 12VGNDSIG 12VGNDSIG 12VGNDSIG 12VIR OUTRELAYSWIFI 2iIDROUTER12V DC FACTORYRESTORE51ZIGBEESRX TXHDMI ol System4ETHERNET -SRX TXRS-232DC 48VIR INFWLINKSIR OUTHDMI INHDBaseT OUTHDBaseTRouterAudioPOWERRX TXVideoControlP SRS-232IR INSIR OUTHDBaseT IN112V DC FACTORYRESTORE1ID3546COMPONENTHDMIWIFI 1DIGITALCOAX OUTeSATAHDMI RNETAT-UHD-EX-100CE-RXLSERIAL 12RELAYSWIFI 2RVIDEO OUTSERIAL 2AUDIO INAUDIO OUTETHERNETBlu-ray player123478GNDSIG 12VGNDSIG 12VGNDSIG 12VGNDSIG 12VIR OUTCONTACTSControl SystemPOWERENTER56FNCCANCELEDIDINFOGame ConsoleAT-UHD-H2H-88MGame ConsoleControlVideoSet top boxRS-2321234567812345HDMI IN6LAN7FWRS-232SVideoControlDC 48VSSIR INIR OUTRX TXIR INAT-UHD-EX-70C-TXPOWERFW RX TXDC 12VHDMI OUT-8HDBaseT OUTLINKHDMI X TXRS-232PIR INSLINKVideoSIR OUTHDBaseT INHDMI OUTControlatlona.com5Toll free: 1-877-536-3976Local: 1-408-962-0515

Troubleshooting1. After I installed the matrix, some of the ports weren’t working. Why does power-cyclingfix the ports?During the installation process, electrostatic build-up can occur. By power-cycling thematrix, it allows the built up to be discharged and the ports reset.2. Why am I not getting multichannel audio or 3D?By default, multichannel audio and 3D will not pass unless all connected devicessupport these features.3. How do I check the firmware version, IP address, or MAC address?Locate the FNC and INFO buttons on the front panel. Press the FNC button. Press the INFObutton once to display the firmware version. Press the INFO button two times to display theIP address. Press the INFO button four times to display the MAC address.4. How do I check the baud rate setting of the matrix?On the front panel, press the following buttons in sequence: FNC, INFO, 2.5. How do I reset the matrix to factory-default settings?On the front panel, simultaneously press and hold both the EDID and INFO buttons for fiveseconds.6. When watching blu-rays, the color doesn’t look right. My other device look alright.Make sure that Deep Color is set to OFF on the blu-ray player.7. What is the default IP address of the matrix?192.168.0.1508. Can I update the matrix firmware through the USB port?The FW mini-USB port is reserved for future use. To update the matrix firmware, connect tothe webGUI or AMS.atlona.com6Toll free: 1-877-536-3976Local: 1-408-962-0515

the UHD-H2H-88M, and 4 rack screws. To affix the rack mount ears, remove the two screws on each side of the UHD-H2H-88M and affix the rack ears to the UHD-H2H-88M (as shown in the picture above). Place the UHD-H2H-88M in the rack, lining the holes in the rack ears with the holes in the rack.

Related Documents:

UHD-H2H-88M, and 4 rack screws. To affix the rack mount ears, remove the two screws on each side of the UHD-H2H-88M and affix the rack ears to the UHD-H2H-88M (as shown in the picture above). Place the UHD-H2H-88M in the rack, lining the holes in the rack ears with the holes in the rack. On

1. LG UK6190PUB Series 4K HDR Smart LED UHD TV Specifications Manual LG UK6190PUB Series 4K HDR Smart LED UHD TV Specifications. 2. 4K UHD TV UN8570 User Manual UN8570PUC Series LG UHD TV UN8570 86″ 82″ 75″. 3. 4K UHD TV UN7370 User Manual UN7370PUE/PUC Series LG UHD TV UN7370 75″ 70″ * Class. 4. Onn Roku TV 50″ 4K UHD TV User .

The Atlona AT-HDR-H2H-88MA is an 8 8 HDMI matrix switcher for high dynamic range (HDR) formats. It is HDCP 2.2 compliant and supports 4K/UHD video @ 60 Hz with 4:4:4 chroma sampling, as well as HDMI data rates up to 18 Gbps. The AT-HDR-H2H-88MA is ideal for professional HDMI signal rout

atlona.com 5 Toll free: 1-877-536-3976 Local: 1-408-962-0515 To rack mount the UHD-H2H-44M unit: us

The 4K/UHD Dual-Distance 8x8 HDMI to HDBaseT Matrix Switcher with PoE is a multi zone switcher with long distance and extended distance ports, multiple control options, supports HDCP 2.2, and multi-channel audio up to Dolby Atmos. Package Contents Features 1 x AT-UHD-PRO3-

at dateline@gator.uhd.edu or fill out the “Get Involved” form found at uhd.edu/dateline. March 22 - april 5 Events calendar March 22-30: uhd faculty Publications Showcase, Library north side reading room, 4th floor. All day Mar

The Foundation 4K UHD adds HDMI 2.0 and HDCP 2.2 technology to the award winning Foundation processor. Designed to be upgradeable, existing Foundation processors can be upgraded to the Foundation 4K UHD platform at the Krell facility. The Foundation 4K UHD updates 4 of the 10 HDMI 1.4a inputs to HDMI 2.0/HDCP 2.2 capability. New on screen display

JS/Typescript API JS Transforms [More] WebGL support Extras What’s next? 8 Completely rewritten since 0.11 Powerful and performant Based on tornado and web sockets Integrated with bokeh command (bokeh serve) keep the “model objects” in python and in the browser in sync respond to UI and tool events generated in a browser with computations or .