Solenoid Valves, Mechanical And Manual Valves
23/2 valve, normally openValve control, general symbol3 14 25/2 valve, bi stableValve control, roll51344 2Valve control, spring5/2 valve, mono stable513Valve control, push button4 25/3 valve, closed center513Valve control, pilot valve4 25/3 valve, open centerValve control, direct acting solenoid5134 25/3 valve, pressurized centerValve control, solenoid pilot valve51322/2 valve, normally closed,mono stable, push button-controlledwith spring return3/2 valve, normally closed,mono stable, pressure-controlledwith spring return4Double 3/2 valve,normally closed/normally closed12125Double 3/2 valve,normally open/normally open5243 1Double 3/2 valve,normally closed/normally open53143 13/2 valve, normally closed2231213Solenoid valves,mechanicaland manual valvesDownloaded from Arrow.com.47
So l en oid va lves, mechanical a nd ma nua l va lvesContentsMultiply Cv by 980 to get a Qn value in ln/min.SY3000 & -5000 – overview4Cv 0.2898SV1000 – solenoid valve,cassette typeCv 0.2399SV2000 – solenoid valve,tie rod typeCv 0.48101SV2000 – solenoid valve,cassette typeCv 0.56102SV3000– solenoid valve, plug-inCv 0.93104SV4000– solenoid valve, plug-inCv 1.6106SV1000, -2000 & -3000– solenoid valve, body portedCv 0.28–0.93108VFN NAMUR – solenoid valveCv 1.4109Cv 0.8110Cv 1111SY3000– solenoid valve, plug-inCv 0.44SY5000– solenoid valve, plug-inCv 0.8861VQD1000 – 4/2 solenoid valveCv 0.0564SYJ3000 – solenoid valveCv 0.1265SYJ5000 – solenoid valveCv 0.2166SYJ7000 – solenoid valveCv 0.7468SY3000 – solenoid valveCv 0.2970SY5000 – solenoid valveCv 0.972SY7000 – solenoid valveCv 1.474SY9000 – solenoid valveCv 2.576VFS2000– solenoid valve, plug-inCv 0.98–2.4579VSR8-4 & VSS8-4 – solenoid valve,plug-in, ISO 15407-2SY3060 – valve manifold,cassette typeCv 0.1980EVS7-6 & VQ7-6– solenoid valve, ISO1Cv 1.5113SY5060 – valve manifold,cassette typeCv 0.581EVS7-8 & VQ7-8– solenoid valve, ISO2Cv 3.2115SY7060 – valve manifold,cassette typeCv 4.983EVS7-10 – solenoid valve, ISO3117Cv 1SJ2000 & -3000 – solenoid valve manifold,plug-in, cassette typeCv 0.08–0.12Cv 1.5–4.984118VQC1000– solenoid valve, plug-inCv 0.2586VQC2000– solenoid valve, plug-inS070 – 3/2 miniaturesolenoid valveCv 0.006–0.021119Cv 0.8VQC4000– solenoid valve, plug-inV114 & V111– solenoid valveCv 0.008–0.016120Cv 2VQ5000– solenoid valve, plug-inCv 0.008121Cv 4.7VF3000 & -5000– solenoid valve4857SV1000 – solenoid valve,tie rod typeDownloaded from Arrow.com.58909498EVS7-XSE647– solenoid valve, ISO3/2 solenoid valvesVV100 – 3/2 block mountedsolenoid valve, cassette typeSubject to change4/2, 5/2 and 5/3 solenoid valves
S o l e n oid va lves , mec h a n ica l a n d man u a l va lvesSYJ300, -500 & -700– 3/2 solenoid valveCv 0.1–0.5123LVM09/090 – 2/3 port direct operated solenoidvalve for chemistry & analysisCv 0.018139EVT307, VO307 & EVT317– 3/2 solenoid valveCv 0.2–0.7125LVM10/100 – 2/3 port direct operated solenoidvalve for chemistry & analysis Cv 0.03–0.04139Cv 0.2126VKF300 – 3 port direct operatedsolenoid valveVP – 3/2 solenoid valve,body portedCv 0.9–3.7VG342 – solenoid valve,body ported, IP65Cv 7.4–13.1LVM15/150 & -20/200 – 2/3 portdirect operated solenoid valvefor chemistry & analysisCv 0.015–0.065140127VDW10, -20 & -30 – 2/2 solenoidvalve for water & airCv 0.03–0.44141129VDW200 & -300 – 3/2 solenoidvalve for water & airCv 0.03–0.44142Cv 0.33–2.11432/2 solenoid valvesVQ20 & -30– 2/2 solenoid valveVCA – solenoid valvefor air & inert gasesCv 0.39–0.78130Mechanical, manual valvesVM, EVM, EVZM, VHK, VH & VR– mechanical, manual valvesCv 0.05–3.2Air operated valvesSYJA, SYA & EVPA – 3/2, 5/2, 5/3air operated valveCv 0.05–1VGA342 – air operated 3/2 valve,body portedCv 7.4–13.1Cv 0.17–2.2146VXK21, -22 & -23 – 2 port direct operated solenoidvalve with built-in strainerCv 0.17–2.2151VXK with electronic timerand built-in strainerCv 0.61152133VXD21 & -22 – pilot operated solenoid valvefor water & other neutral mediaCv 1.9–13153134VXZ22 & -23 – zero differential pressuresolenoid valve with brass bodyCv 1.9–12154Proportional flow valvesVXZ22 & -23 – zero differential pressure solenoidvalve with stainless steel bodyCv 1.9–12155PVQ10– proportional flow valve135PVQ30– proportional flow valveVXS22 & -23 – zero differential pressuresolenoid valve for steamCv 2.4–12156136VNB & VND – 2/2 air operated valvefor neutral media or steamCv 1–48157SGC – 2/2 air operated valvefor cutting fluids158Media valvesLVC – 2/2 air operatedchemical valveCv 0.35–6137LVA – 2/2 air operatedchemical valveCv 0.07–6137Cv 0.35–3.3138LVQ – 2/2 air operated corrosion resistantchemical valveCv 0.35–8138LVH – 2/2 manually operatedchemical valveSubject to changeNew VX21, -22 & -23 – normally closed, 2 portdirect operated solenoid valve Cv 0.23–2.21144VX21, -22 & -23 – 2 portdirect operated solenoid valve131Downloaded from Arrow.com.4Cv 1.25–18.349
So l en oid va lves, mechanical a nd ma nua l va lvesDirectional control valves – solenoid valvesSeal type,main valveIdeal size for actuator controlMetal sealRubber seal4ValveseriesFlowcharacteristicsA, B E(2 position/mono stable)Cv value3VQD10.07VQD1000 VK10.12VK3000 SJ0.08–0.12SJ2000/3000 SYJ0.12–0.74SYJ3000 SXVQZSpeed: 100Applicable cylinderØ6Ø10Ø16Ø20Ø25Ø32Ø40Ø50Ø63mm/s or lowerØ80Ø100Ø125SYJ5000 SYJ7000 0.18–0.82SX3000 SX5000 SX70000.32–1.2VQZ1000 VQZ2000 VQZ3000SV0.28–1.6SV1000 SV2000 VQ/VQC0.2–4.7VQC1000 VQC2000 VQC4000 SY0.26–2.5SY3000 SY3000PLUG-IN 16.7VZS0.33–0.53VZS2000 VZS3000 VQZ0.17–0.74VQZ1000 VQZ2000 VS41VQ/VQC0.18–3.4VQ71.1–3VFS0.4–9VF1000 SY5000 SV3000Ø160 SV4000VQ5000 SY9000 (see example 1)VF3000 VF5000 VQ7-8 VQ7-6 VFR2000 Ø140VFR3000 VFR4000 VFR5000VP4050 VQZ3000VS4 10 VQC1000 VQC2000 VQ5000 VQC4000 VQ7-6 VFS1000 VFS2000 VFS3000VQ7-8 VFS4000 VFS50001. Only available with single coil. 2. Number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.Conditions Pressure: 0.5 MPaTubing length: 1 mLoad: 50%Stroke: 200 mmSpeed: 100 mm/s or lowerSeal typeRubber seal: Resistant to dust when the seals betweenthe spool and sleeve are made of rubber.Metal seal: Long life thanks to the air bearing between metal spool and steel sleeve.Cylinder size and speedSubject to changeExample 1: When using the valve series SY9000(2500 ln/min) for driving Ø40 to Ø100 cylinders, they willhave an average speed under the following conditions.50Downloaded from Arrow.com.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves5 port for pneumaticsØ180Ø200Ø250Ø300Powerconsumption (W)Connection sizePush-in fitting (Ø)ApplicableThreaded connection (G)tubing size (mm)2M544M5, 1/84, 6M3, M52, 4, 6M3, M5, 1/8, 1/44, 6, 80.6M5, 1/8, 1/4, 3/84, 6, 8, 100.4M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 100.61/8, 1/4, 3/8, 1/24, 6, 8, 10, 120.4M53.2, 4, 6, 8, 10, 120.35 (0.1)2M5, 1/8, 1/4, 3/8, 1/24, 6, 8, 10, 121.8M5, 1/8, 1/4, 3/8, 1/2—1/4, 3/8, 1/2, 3/46, 8, 101.81/8, 1/4, 3/8, 1/2, 3/4, 1—123/8, 1/2, 3/4, 1, 1 1/4, 1 1/2—1.81/8, 1/44, 6, 80.60.35 (0.1)21VFR6000 VP4070 1VFS6000 M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 105.51/8, 1/4, 3/8—1M5, 1/4, 3/83.2, 4, 6, 8, 10, 1211/4, 3/8, 1/2, 3/46, 8, 10, 121/8, 1/4, 3/8, 1/2, 3/4, 1—1.84Power consumptionReduction of necessary power for the valveWith power saving circuit: The power consumption isreduced to one quarter of the standard product powerconsumption. (The effect occurs when the on time isgreater than 62 ms and operated at rated voltage of24 VDC.)Electrical circuit (with energy saving circuit)DiodeTime circuitRed ( )LEDCoil12Black (–)2: Holding currentSubject to change1: Actuation powerDownloaded from Arrow.com.51
So l en oid va lves, mechanical a nd ma nua l va lvesDirectional control valves – solenoid valvesSeal type,main valveIdeal size for actuator controlMetal sealRubber seal4ValveseriesFlow characteristicsA, B E(2 position/mono stable)Cv value3VQD10.07VQD1000 VK10.12VK3000 SJ0.08–0.12SJ1000/2000 SYJ0.12–0.74SYJ3000 SXVQZSpeed: 300Applicable cylinderØ6Ø10Ø16Ø20Ø25Ø32Ø40Ø50Ø63SYJ5000 SYJ7000 0.18–0.82SX3000 SX5000 SX70000.32–1.2VQZ1000 VQZ2000 VQZ3000SV0.28–1.6SV1000 SV2000 VQ/VQC0.2–4.7VQC1000 VQC2000 VQC4000 SY0.26–2.5SY3000 SY3000PLUG-IN 16.7VZS0.33–0.53VZS2000 VZS3000 VQZ0.17–0.74VQZ1000 VQZ2000 VS41VQ/VQC0.18–3.4VQ71.1–3VFS0.4–9VF1000 SY5000 SV3000Ø80Ø100Ø125Ø140Ø160 SV4000VQ5000 SY9000 (see example 1)VF3000 VF5000 VQ7-6 VFR2000 mm/s or lowerVFR3000 VQ7-8 VFR4000VFR6000 VFR5000VP4050 VQZ3000VS4 10 VQC1000 VQC2000 VQC4000 VQ7-6 VFS1000 VFS2000 VFS3000VQ5000 VQ7-8 VFS4000 VFS5000VFS6000 1. Only available with single coil. 2. Number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.Conditions Pressure: 0.5 MPaTubing length: 1 mLoad: 50%Stroke: 200 mmSpeed: 300 mm/s or lowerSeal typeRubber seal: Resistant to dust when the seals betweenthe spool and sleeve are made of rubber.Metal seal: Long life thanks to the air bearing between metal spool and steel sleeve.Cylinder size and speedSubject to changeExample 1: When using the valve series SY9000(2500 ln/min) for driving Ø40 to Ø100 cylinders, they willhave an average speed under the following conditions.52Downloaded from Arrow.com.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves5 port for pneumaticsØ180Ø200Ø250Ø300Power consumption (W)Connection sizePush-in fitting (Ø)ApplicableThreaded connection (G)tubing size (mm)2M544M5, 1/84, 6M3, M52, 4, 6M3, M5, 1/8, 1/44, 6, 80.6M5, 1/8, 1/4, 3/84, 6, 8, 100.4M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 100.61/8, 1/4, 3/8, 1/24, 6, 8, 10, 120.4M53.2, 4, 6, 8, 10, 120.35 (0.1)2M5, 1/8, 1/4, 3/8, 1/24, 6, 8, 10, 121.8M5, 1/8, 1/4, 3/8, 1/2—1/4, 3/8, 1/2, 3/46, 8, 101.81/8, 1/4, 3/8, 1/2, 3/4, 1—123/8, 1/2, 3/4, 1, 1 1/4, 1 1/2—1.81/8, 1/44, 6, 80.60.35 (0.1)21VP4070 M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 105.511/8, 1/4, 3/8—1M5, 1/4, 3/83.2, 4, 6, 8, 10, 1211/4, 3/8, 1/2, 3/46, 8, 10, 121/8, 1/4, 3/8, 1/2, 3/4, 1—1.84Power consumptionReduction of necessary power for the valveWith power saving circuit: The power consumption isreduced to one quarter of the standard product powerconsumption. (The effect occurs when the on time isgreater than 62 ms and operated at rated voltage of24 VDC.)Electrical circuit (with energy saving circuit)DiodeTime circuitRed ( )LEDCoil12Black (–)2: Holding currentSubject to change1: Actuation powerDownloaded from Arrow.com.53
So l en oid va lves, mechanical a nd ma nua l va lvesDirectional control valves – solenoid valvesSeal type,main valveIdeal size for actuator controlMetal sealRubber seal4ValveseriesFlow characteristicsA, B E(2 position/mono stable)Cv value3VQD10.07 VQD1000VK10.12 VK3000SJ0.08–0.12SYJ0.12–0.74SXVQZSpeed: 500Applicable cylinderØ6Ø10Ø16Ø20Ø25Ø32Ø40Ø50Ø63mm/s or lowerØ80Ø100Ø125Ø140Ø160 SJ1000/2000SYJ5000 SYJ7000 0.18–0.82SX3000 SX5000 SX70000.32–1.2VQZ1000 VQZ2000 VQZ3000SV0.28–1.6SV1000 SV2000 VQ/VQC0.2–4.7VQC1000 VQC2000 VQC4000 SY0.26–2.5SY3000 SY3000PLUG-IN 16.7VZS0.33–0.53VZS2000 VZS3000 VQZ0.17–0.74VQZ1000 VQZ2000 VS41VQ/VQC0.18–3.4VQ71.1–3VFS0.4–9 SYJ3000 SY5000 SV3000 SV4000 SY9000 (see example 1)VF3000 VF1000VF5000 VQ7-6 VFR2000 VQ5000 VFR3000 VQ7-8 VFR4000VFR6000 VFR5000VP4070 VP4050 VQZ3000VS4 10 VQC1000 VQC2000 VQC4000 VQ7-6 VFS1000 VFS2000 VFS3000VQ5000 VQ7-8 VFS4000 VFS5000VFS6000 1. Only available with single coil. 2. Number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Qn value in ln/min.Conditions Pressure: 0.5 MPaTubing length: 1 mLoad: 50%Stroke: 200 mmSpeed: 500 mm/s or lowerSeal typeRubber seal: Resistant to dust when the seals betweenthe spool and sleeve are made of rubber.Metal seal: Long life thanks to the air bearing between metal spool and steel sleeve.Cylinder size and speedSubject to changeExample 1: When using the valve series SY9000(2500 ln/min) for driving Ø40 to Ø100 cylinders, they willhave an average speed under the following conditions.54Downloaded from Arrow.com.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lves5 port for pneumaticsØ180Ø200Ø250Ø300Power consumption (W)Connection sizePush-in fitting (Ø)ApplicableThreaded connection (G)tubing size (mm)2M544M5, 1/84, 6M3, M52, 4, 6M3, M5, 1/8, 1/44, 6, 80.6M5, 1/8, 1/4, 3/84, 6, 8, 100.4M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 100.61/8, 1/4, 3/8, 1/24, 6, 8, 10, 120.4M53.2, 4, 6, 8, 10, 120.35 (0.1)2M5, 1/8, 1/4, 3/8, 1/24, 6, 8, 10, 121.8M5, 1/8, 1/4, 3/8, 1/2—1/4, 3/8, 1/2, 3/46, 8, 101.81/8, 1/4, 3/8, 1/2, 3/4, 1—123/8, 1/2, 3/4, 1, 1 1/4, 1 1/2—1.81/8, 1/44, 6, 80.60.35 (0.1)21M5, 1/8, 1/4, 3/83.2, 4, 6, 8, 105.511/8, 1/4, 3/8—1M5, 1/4, 3/83.2, 4, 6, 8, 10, 1211/4, 3/8, 1/2, 3/46, 8, 10, 121/8, 1/4, 3/8, 1/2, 3/4, 1—1.84Power consumptionReduction of necessary power for the valveWith power saving circuit: The power consumption isreduced to one quarter of the standard product powerconsumption. (The effect occurs when the on time isgreater than 62 ms and operated at rated voltage of24 VDC.)Electrical circuit (with energy saving circuit)DiodeTime circuitRed ( )LEDCoil12Black (–)2: Holding currentSubject to change1: Actuation powerDownloaded from Arrow.com.55
So l en oid va lves, mechanical a nd ma nua l va lvesSMC’s metal seal valvesValves in high-frequency use often suffer from wear on the seals.SMC’s metal seal valves resist such wear and have superior life time.4Avalve spool change position inside the valve whenit is affected manually, with spring force, or whenpower is applied to the coil. The spool position determines which ports are pressurised and exhausted.Many valves have a so called rubber seal, which canbe compared to a rubber O-ring. This type of seal worksvery well and is found in many of SMC’s valves.In some applications, for example high-frequencyapplications, rubber seal can wear out, and the valvesneed to be replaced regularly.SMC offer an optional metal seal for these applications. This option extends the life time of the valve andyour application.A metal seal spool moves in a fixed sleeve, which inturn is rubber sealed against the valve body. The fit between spool and sleeve is very precise. At least 200 million cycles life time. There are documented cases where more than 1 billion cycles havebeen achieved.Less sensitive to impurities than conventional rubberseal valves.Friction free.Air gap between spool and sleeve.Highest precision, surface finish, and small gap (1 µm).Minimum leakage (slightly more than rubber sealvalve).Valve series available with metal seal: EVS, SQ, SY,VQ1000/2000/4000, VQ7, VQC and VSS.Subject to changeDetail of the metal spool inside its sleeve.56Downloaded from Arrow.com.
S o l e n oid va lves , mec h a n ica l a n d man u a l va lvesSY3000 & -5000 – overview SMC’s new SY3000 and SY5000 series is extremely flexible and versatile. The high flow rate version enables you in many cases to use a smaller valve than usually. See below for an overview of some series with unique advantages.Cable interface4D-sub/flat cableL connectionCircular multipoleTerminal boxFieldbus interfaceEX250EX260EX500EX600FlexibilityFunction modulesin sandwich formatMix SY3000 and SY5000on the same manifoldEasy to change port modeSubject to changeAlso available in hygienic design. Contact SMC for more information. Delivery Ex-StockDownloaded from Arrow.com.For more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nl57
So l en oid va lves, mechanical a nd ma nua l va lvesSY3000 – solenoid valve, plug-inMediumDegree of filtrationMax. working pressureMin. working pressureOperating temperatureVoltage/power4FlowEnclosureAir (dry)5 µm0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar)5/2 mono stable: 0.15 MPa (1.5 bar);5/2 bi stable: 0.1 MPa (1 bar);5/3 with center position: 0.2 MPa (2 bar);double 3/2: 0.15 MPa (1.5 bar);metal seal (not double 3/2): 0.1 MPa (1 bar)–10 to 50 CStandard: 24 VDC 10% (12 VDC on request)/0.4 W (energy saving 0.1 W)470 ln/minIP40/IP67 depending on choice of electrical connection Unmatched flexibility and easy configuration because of new internal connector technology and the ability to mix different sizes in the same manifoldValve – plug-in, 24 VDCPart K-5U1SY3A00-5U1SY3B00-5U1SY3C00-5U1TypeWeight74 g5/2 mono stable, rubber seal5/2 mono stable, rubber seal,74 gexternal pilot76 g5/2 mono stable, metal seal, high pressure76 g5/2 mono stable, metal seal, external pilot83 g5/2 bi stable, rubber seal83 g5/2 bi stable, rubber seal, external pilot86 g5/2 bi stable, metal seal, high pressure86 g5/2 bi stable, metal seal, external pilot87 g5/3 closed center, rubber seal87 g5/3 exhausted center, rubber seal87 g5/3 pressurized center, rubber seal90 g5/3 closed center, metal seal, high pressure90 g5/3 exhausted center, metal seal, high press.90 g5/3 pressurized center, metal seal, high press.83 gDouble 3/2 NC/NC, rubber seal83 gDouble 3/2 NO/NO, rubber seal83 gDouble 3/2 NC/NO, rubber sealValve, plug-inAll versions available with external pilot supply. Contact SMC for delivery times.Valve manifold, D-subValve manifold for fieldbus – circular and L connection,Ø6 mm, add valves and electrical connectorPart 0-12B-C6Valve stations24681012TypeSide portedSide portedSide portedSide portedSide portedSide portedValve manifold for D-sub connection– Ø6 mm, add valves and D-sub cablePart 1-12B-C658Valve stations24681012 Delivery Ex-StockDownloaded from Arrow.com.TypeSide portedSide portedSide portedSide portedSide portedSide portedSub plate, side portedSub plate, bottom portedMetal sub plate for D-sub connection– Ø6 mm, add valves and D-sub cablePart SS5Y3-51F1-10D-C6FSS5Y3-51F1-12D-C6FValve stations46810124681012TypeSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedFor more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nlSubject to changeValve manifold, fieldbus
S o l e n oid va lves , mec h a n ica l a n d man u a l va lvesSY3000 – solenoid valve, plug-inReplacement & extension partsManifold bottom plateEnd plate D-side, fieldbusManifold bottom plate – side portedPart 30M-2-1DA-C6TypeSingle solenoid, Ø4 mmSingle solenoid, Ø6 mmDouble solenoid, Ø4 mmDouble solenoid, Ø6 mmEnd plate D-side for fieldbus – circularand L connection, with supply and exhaust, side ported, Ø8 mmPart e—Built-in silencerExternal pilotIndividual P-supplyIndividual exhaustIndividual P-supply – for individual valvePart numberSY30M-38-1A-C6TypeØ6 mmIndividual exhaust – for individual valveTypeØ6 mmEnd plate U-sideEnd plate D-side for D-sub connection– with supply and exhaust, side ported, Ø8 mmPart -C8Type—Built-in silencerExternal pilot4End plate U-side – with supply and exhaust, side ported, Ø8 mmPart nking plateType—Built-in silencerExternal pilotDIN rail mountBlanking plate – for unused valve stationsPart numberSY30M-26-1ASY30M-26-2ATypeFor valve manifoldFor metal sub plateDIN rail mount – for manifold, 1 mount per packPart numberSY30M-15-1ASubject to changePart numberSY30M-39-1A-C6End plate D-side, D-sub Delivery Ex-StockDownloaded from Arrow.com.For more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nl59
So l en oid va lves, mechanical a nd ma nua l va lvesSY3000 – solenoid valve, plug-inReplacement & extension parts4P-shut-offCheck valveP-shut-off – for individual valveDouble check moduleSealing discDouble check module– maintains correct position during long stopsPart numberSY30M-50-1APart numberSY30M-60-1ACheck valve – for exhaust channelsSealing discPart numberSY30M-24-1APart numberSY30M-40-1ASY30M-40-2ATypeFor P-supply (2 different pressures in manifold)For exhaust (2 different exhausts in manifold)Electrical connectionsL connector cable – 34 wirePart numberTypeSY30M-14-4A-1-2Connector with 1,5 m cableSY30M-14-4A-1-3Connector with 3 m cableSY30M-14-4A-1-4Connector with 5 m cableSY30M-14-4A-1-6Connector with 10 m cableL connector cable – 17 wireL connector cablePart numberTypeSY30M-14-4A-2-3Connector with 3 m cableL connector cable – 9 wirePart numberTypeSY30M-14-4A-3-3Connector with 3 m cableCircular connector – 26-pin (IP67)Part MC26-030AXT100-MC26-050AXT100-MC26-080TypeCircular connectorConnector onlyConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cableD-sub cable with connector – 25-pin, in accordance with MIL-norm (0,3 mm2)Circular connectorCircular connector, connector onlyCircular connector,connector with cableD-sub cable with connectorPart numberVVQC1000-T0-1Type20 connections (IP67)Fieldbus – all SI-units can be used with manifolds for fieldbus,see chapter 5For other versions, contact SMC.60 Delivery Ex-StockDownloaded from Arrow.com.For more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nlSubject to changePart numberTypeVVZS3000-21A-2*Connector with 3 m cableVVZS3000-21A-3*Connector with 5 m cableVVZS3000-21A-4*Connector with 8 m cableTerminal box – suitable for same manifolds as fieldbus connection
S o l e n oid va lves , mec h a n ica l a n d man u a l va lvesSY5000 – solenoid valve, plug-inMediumDegree of filtrationMax. working pressureMin. working pressureOperating temperatureVoltage/powerFlowEnclosureAir (dry)5 µm0.7 MPa (7 bar); high pressure type: 1 MPa (10 bar)5/2 mono stable: 0.15 MPa (1.5 bar);5/2 bi stable: 0.1 MPa (1 bar);5/3 with center position: 0.2 MPa (2 bar);double 3/2: 0.15 MPa (1.5 bar);metal seal (not double 3/2): 0.1 MPa (1 bar)–10 to 50 CStandard: 24 VDC 10% (12 VDC on request)/0.4 W (energy saving 0.1 W)1060 ln/minIP40/IP67 depending on choice of electrical connection4 Unmatched flexibility and easy configuration because of new internal connector technology and the ability to mix different sizes in the same manifoldValve – plug-in, 24 VDCPart K-5U1SY5A00-5U1SY5B00-5U1SY5C00-5U1TypeWeight82 g5/2 mono stable, rubber seal5/2 mono stable, rubber seal,82 gexternal pilot91 g5/2 mono stable, metal seal, high pressure91 g5/2 mono stable, metal seal, external pilot90 g5/2 bi stable, rubber seal90 g5/2 bi stable, rubber seal, external pilot5/2 bi stable, metal seal, high pressure 101 g101 g5/2 bi stable, metal seal, external pilot100 g5/3 closed center, rubber seal100 g5/3 exhausted center, rubber seal100 g5/3 pressurized center, rubber seal111 g5/3 closed center, metal seal, high pressure111 g5/3 exhausted center, metal seal, high press.5/3 pressurized center, metal seal, high press. 111 g90 gDouble 3/2 NC/NC, rubber seal90 gDouble 3/2 NO/NO, rubber seal90 gDouble 3/2 NC/NO, rubber sealAll versions available with external pilot supply. Contact SMC for delivery times.Valve manifold for fieldbus – circular and L connection,Ø8 mm, add valves and electrical connectorSubject to changePart 1S0-12B-C8Sub plate, side ported Delivery Ex-StockDownloaded from Arrow.com.Valve stations2468101224681012TypeSide portedSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedBottom portedSub plate, bottom portedValve, plug-inValve manifold, fieldbus, side portedValve manifold, D-sub, side portedValve manifold for D-sub connection– Ø8 mm, add valves and D-sub cablePart 1F1-12B-C8Valve stations2468101224681012TypeSide portedSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedBottom portedMetal sub plate for D-sub connection– Ø8 mm, add valves and D-sub cablePart SS5Y5-51F1-10D-C8FSS5Y5-51F1-12D-C8FValve stations46810124681012TypeSide portedSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedBottom portedFor more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nl61
So l en oid va lves, mechanical a nd ma nua l va lvesSY5000 – solenoid valve, plug-inReplacement & extension parts4Manifold bottom plateEnd plate D-side, fieldbusManifold bottom platePart A-C6SY50M-2-2DA-C8and L connection, with supply and exhaust, side ported, Ø10 mmSide portedSide portedSide portedSide portedBottom portedBottom portedBottom portedBottom portedManifold bottom plate – for mixing SY3000/5000, side portedTypeSingle solenoid, Ø6 mmDouble solenoid, Ø4 mmDouble solenoid, Ø6 mmIndividual P-supplyIndividual exhaustIndividual P-supply – for individual valvePart numberSY50M-38-1A-C8TypeØ8 mmIndividual exhaust – for individual valveTypeØ8 mmPart Type—Built-in silencerExternal pilotEnd plate D-side for D-sub connection– with supply and exhaust, side ported, Ø10 mmPart R1-C10Type—Built-in silencerExternal pilotEnd plate U-side – with supply and exhaust, side ported, Ø10 mmPart Blanking plateType—Built-in silencerExternal pilotDIN rail mountBlanking plate – for unused valve stationsPart numberSY50M-26-1ASY50M-26-2ATypeFor valve manifoldFor metal sub plateDIN rail mount – for manifold, 1 mount per packPart numberSY50M-15-1ASubject to changePart numberSY50M-39-1A-C8End plate U-sideEnd plate D-side for fieldbus – circularTypeSingle solenoid, Ø6 mmSingle solenoid, Ø8 mmDouble solenoid, Ø6 mmDouble solenoid, Ø8 mmSingle solenoid, Ø6 mmSingle solenoid, Ø8 mmDouble solenoid, Ø6 mmDouble solenoid, Ø8 mmPart d plate D-side, D-sub62 Delivery Ex-StockDownloaded from Arrow.com.For more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nl
S o l e n oid va lves , mec h a n ica l a n d man u a l va lvesSY5000 – solenoid valve, plug-inReplacement & extension partsP-shut-offCheck valveP-shut-off – for individual valvePart numberSY50M-50-1ACheck valve – for exhaust channelsPart numberSY50M-24-1ADouble check moduleSealing discDouble check module– maintains correct position during long stopsPart numberSY50M-60-1A4Sealing discPart numberSV2000-59-2ATypeFor P-supply and exhaust (2 different pressures in manifold)Electrical connectionsL connector cable – 34 wirePart numberTypeSY30M-14-4A-1-2Connector with 1,5 m cableSY30M-14-4A-1-3Connector with 3 m cableSY30M-14-4A-1-4Connector with 5 m cableSY30M-14-4A-1-6Connector with 10 m cableL connector cable – 17 wireL connector cablePart numberTypeSY30M-14-4A-2-3Connector with 3 m cableL connector cable – 9 wirePart numberTypeSY30M-14-4A-3-3Connector with 3 m cableCircular connector – 26-pin (IP67)Part MC26-030AXT100-MC26-050AXT100-MC26-080TypeCircular connectorConnector onlyConnector with 1,5 m cableConnector with 3 m cableConnector with 5 m cableConnector with 8 m cableD-sub cable with connector – 25-pin, in accordance with MIL-norm (0,3 mm2)Circular connectorCircular connector, connector onlyCircular connector,connector with cableD-sub cable with connectorPart numberTypeVVZS3000-21A-2*Connector with 3 m cableVVZS3000-21A-3*Connector with 5 m cableVVZS3000-21A-4*Connector with 8 m cableTerminal box – suitable for same manifolds as fieldbus connectionSubject to changePart numberVVQC1000-T0-1Type20 connections (IP67)Fieldbus – all SI-units can be used with manifolds for fieldbus,see chapter 5For other versions, contact SMC. Delivery Ex-StockDownloaded from Arrow.com.For more info, ask the SMC experts: Phone 31 (0) 20 531 88 88 / info@smcpneumatics.nl63
So l en oid va lves, mechanical a nd ma nua l va lvesVQD1000 – 4/2 solenoid valveMediumDegree of filtrationMax. working pressureMin. working pressureOperating temperatureVoltage/powerFlowEnclosureManual overrideLED, surge voltage suppressor4Air or neutral gases5 µm0.7 MPa (7 bar)0.0 MPa (0 bar) (vacuum: –100 kPa)–10 to 50 C24 V/2 W (high flow type: 3.2 W)50 ln /min (high flow type: 70 ln /min)IP40Push button, non-lockableStandard. Valve has no polarity Direct acting High flow Compact Low weight Also for vacuum (leakage 0.03 cm3/s He) Quick response time – on: 4 ms; off: 2 msValve – 4/2Blanking plate – with screws and gasketPart numberTypeStandard, including screwsand gasketStandard, including plateHigh flow QWeight34 g54 g54 gSub platePart V4QD15-06C4F-QVV4QD15-08C4F-QStations224
LVM09/090 2/3 port direct operated solenoid Cv 0.018 139 LVM10/100 2/3 port direct operated solenoid Cv 0.03 0.04 139 LVM15/150 & -20/200 2/3 port direct operated solenoid valve Cv 0.015 0.065 140 VDW10, -20 & -30 2/2 solenoid Cv 0.03 0.44 141 VDW200 & -300 3/2 solenoid Cv 0.03 0.44 142 VCA solenoid valve Cv 0.33 2.1 143 N
S - 5,20 bar (75 psi) check Solenoid Energization Identity Blank - Standard arrangement for ANSI B93.9 (i.e. energize solenoid A to follow flow P to A). V - Solenoid identification determined by position of solenoid (i.e. solenoid A at port A end/solenoid B at port B end). Note 4 and 8 type spools are always V. Solenoid
Solenoid Controlled Pilot Operated Directional Valves Solenoid Controlled Pilot Operated Directional Valves These valves are composed of a solenoid operated pilot valve and a pilot operated slave valve. When a solenoid is energised the pilot valve directs the flow to move the spool of the slave valve, thus changing the direction of flow in the .
Manual 36541 Solenoid Troubleshooting Guide Woodward 1 Chapter 1. General Information Solenoid Operation Single Coil Solenoid A solenoid is a device that converts electrical energy into mechanical force. The basic single coil solenoid is made of a free moving steel plunger that sits within a wound coil of copper wire.
MANUAL VALVES PVC-U The PVC-U manual valves line consists of a comprehensive range of ball valves, butterfly valves, diaphragm valves, check valves, sediment strainers, air release valves, foot valves and angle seat valves for use in the construction of process and service lines fo
1 subject page bronze gate valves 6-17 bronze globe valves 18-25 bronze swing check valves 26-29 engineering data 58-68 iron swing check valves 39-40 iron gate valves 31-36 iron globe valves 37-38 the wm.powell company—profile 2-3 terms and conditions 69-71 iron ul and fm gate valves 42-51 iron ul and fm check valves 52-55 figure number cross comparison table 57 bronze and iron valve index 4
4 Section Pages Argus Atomac Automax Deutsche Audco Durco McCANNA 3-Piece Ball Valves 6 - 9 One Piece Threaded Valves 9 Flanged Ball Valves 10 - 14 One-Piece Butt Weld Valves 15 Top Entry Valves 15 Butterfly Valves 16 Non-lubricated Plug Valves 17 - 19 Lined Valves and Accessories 20 - 24 Check Valves 25 Gate Valves 25 Rotary Contro
FC & FL valves, WKM type valves, Shaffer type valves, Flocon type valves, check valves, cup testers, pulsation dampeners: www.mcmoiltools.com o’Drill / mCm Centrifugal pumps, cyclone pump, skid packages, gate valves, shear relief valves, reset relief valves, float valves, butterfly valves, plug
successfully in captivity, yet animal nutrition is a new and relatively unexplored field. Part of the problem is a lack of facilities in zoological institutions and a lack of expertise. There is, thus, a strong need to develop nutritional studies and departments in zoological institutions. Research on nutrition is carried out both as a problem-solving exercise (in relation to ill-health or .
