LIQUID-APPLIED POLYURETHANE WATERPROOFING SYSTEM
Professional waterproofing applicators in over 45 countries, use thefor demanding waterproofing. The reasons are: Simple application.A flat roof is constantly exposed to humidity,ultraviolet degradation, weathering, acid rain attack,mechanical wear and ongoing movement stresses,due to temperature changes. As a result, most flatroofs are leaking and require renovation. When applied, forms a seamless membrane,without joints or leak possibilities. Resistance to water. Crack-bridging up to 2mm, even at -100C. Maintainance of its mechanical properties,over a temperature span of -300C to 900C. Provides water vapor permeability. Provides full surface adhesion. Provides sun reflectivity, contributing to thermoinsulation. Provides anti-root properties.The professional, long lasting,waterproofing solution is the The waterproofed surface can be used for mediumto heavy pedestrian traffic, depending on theMARISEAL SYSTEM top-coat. Resistant to detergents, oils and common chemicals. Easy local repair, if the membrane is mechanically damaged. Low cost.Theis a group of coatingsbased on Polyurethane resins, which used incombination, creates a seamless membrane on theflat roof, that protects the building structure reliablyand on a long term basis, even under the mostdifficult conditions.usesThecan be used on: Roofs, Balconies and Terraces Wet areas Water tanksMORTARCONCRETEBITUMENFELTPVC AND EPDM MEMBRANEMETALWOOD Flowerbeds Public Walkways Foundations, etc.etc.
Products rangeThe MARISEAL SYSTEM consists ofMARISEAL PRIMERSMARISEAL TOP COATSThe MARISEAL 710 is a fast curing, one-component polyurethaneprimer, used to prepare absorbent surfaces like concrete, cement screed,mortar, wood, etc.The MARISEAL 400 is a pigmented, colorfast, UV-stable, permanentelastic, one-component aliphatic polyurethane coating, used as atop-coat over exposed polyurethane waterproofing coatings. Used onroofs and terraces where a medium pedestrian traffic is expected.The MARISEAL AQUA PRIMER is a two-component epoxy waterbasedprimer, used to prepare the majority of construction surfaces includingabsorbent and non-absorbent surfaces like bitumen-felts, ceramic tiles,moist concrete, etc.The MARISEAL 420 is a pigmented, colorfast, UV-stable, permanenthard-elastic, one-component aliphatic polyurethane coating, used as atop-coat over exposed polyurethane waterproofing coatings.Used on public walkways and areas where a heavy pedestrian traffic isexpected.MARISEAL WATERPROOFING COATINGSThe MARISEAL 250 is a premium, one-component, permanent elastic,liquid applied polyurethane coating, that cures to a seamless, highlyelastic waterproofing membrane. Used on most waterproofingapplications, as roofs, balconies, terraces, etc.The MARISEAL DETAIL is a one-component, permanent elastic,liquid applied polyurethane coating, reinforced by fibers. It is used towaterproof details on the roof like exhaust pipes, light domes, etc.The MARITRANS is a transparent, UV-stable, permanent hard-elastic,one-component aliphatic polyurethane coating, used as a sealer overdecorative polyurethane waterproofing coatings. Used on balconies andterraces where a medium pedestrian traffic is expected.The MARITRANS can be also used as a transparent coating towaterproof ceramic tiles surfaces.MARISEAL SYSTEM AUXILIARY PRODUCTSPolyester, non-wooven, reinforcing geotextile.Used for reinforcing roofing details or the entire surface.The MARISEAL 270 is a one-component, permanent elastic, liquidapplied polyurethane coating, that cures to a seamless, elastic waterproofingmembrane. Used on wet areas, foundations, balconies (below tiles), etc.The MARISEAL 300 is a two-component, solvent free, liquid-applied,permanent elastic polyurethane coating that cures to a seamless,elastic waterproofing membrane. Used in potable water tanks, waterchannels, sewage tanks, etc.Accelerator for use with the MARISEAL 250 and MARISEAL 270.Low modulus Polyurethane sealant used to seal joints and cracks.application iongun
DetailsGutter DetailNo Problem with DetailsAll the waterproofing coatings of the MARISEAL SYSTEM cure to formpermanently elastic, seamless membranes providing waterproofing ona long-term basis, even to the most difficult and problematic details.MARISEAL 400MARISEAL FABRICMARISEAL 250/DETAILMARISEAL AQUA-COATWhile other waterproofing membranes or systems fail at these difficultdetail areas, the MARISEAL SYSTEM has proven itself toperform, even in the most extreme climatic zones on the planet.The MARISEAL SYSTEM creates a seamless membrane with fullsurface adhesion to the surface, so no additional mechanical fixings oradditional flashings are required.Crack DetailCoping Detail250 orMARISEAL DETAILAbutment DetailExternal Corner Abutment DetailPipe DetailorMARISEAL DETAILorMARISEAL DETAILor MARISEAL DETAIL
Waterproofing of Roofs, Balconies and TerracesThe MARISEAL 250 has been tested by the German State Testing Institute forConstruction Materials MPA-Braunschweig, according the European Union Directivefor liquid-applied roof waterproofing ETAG 005, and was found conforming.Theis the backbone of the MARISEAL SYSTEMfunctioning as the main elastic and waterproofing membrane ofthe system.The MARISEAL 250 is a one-component, liquid-applied, coldapplied and cold curing, polyurethane coating that cures to aseamless, highly permanent elastic waterproofing membrane.The MARISEAL 250is used on most waterproofing applications as:ROOFSThe MARISEAL 250 was tested by the French Testing Institute for ConstructionMaterials BUREAU-VERITAS according the French Norms and was found conforming.The MARISEAL 250 was certified by the German State Intitute for ConstructionTechniques DIBt-Berlin, with the European Technical Approval (ETA) and with the CEmark and certification.LEVELS OF USE CATEGORIES ACCORDING ETAG 005:Working Life:W210 years minimumBALCONIESClimate zone:M and SNorth and South EuropeTERRACESImposed loads:P1 to P3Up to high pedestrial trafficWET AREASDachneigung:S1 bis S4Roof slope from 50 to 300Lowest surface temperature:TL3-200 CHighest surface temperature:TH9900 CFLOWERBEDSReaction to fire:Class EEN 13501, DIN 4102-1 und -7POLYURETHANE FOAM PROTECTIONResistant to wind loads: 50 kPaResistant to all wind loadsPUBLIC WALKWAYSThe MARISEAL 250 was additionally testedand approved according:DIN 1928, which classifies it as a waterproofing coating.DIN 4102 part I, which classifies it as a B2 fire rating constructionmaterial.DIN 4102 part 7, which classifies it as a surface coating resistant toflying sparks and radiating heat.The MARISEAL 250has also been tested and certified inmany countries around the world according to local and nationalregulations and norms.Root Resitancefor Waterproofingof Green RoofsThe MARISEAL 250 was tested according EN 53420which classifies it as a root-resistant coating, suitable tobe used in green roofs, flowerbeds and planters.
Waterproofing of Wet Areas & FoundationsDetailWaterproofingmariseal310Τhe MARISEAL 270, is the elastic and waterproofing coating ofthe system for concealed areas and below ground applications.Theis a liquid-applied, thixotropic, permanentelastic, fiber-reinforced, one component polyurethane coating used forlong-lasting waterproofing of complex roofing details and connections.The MARISEAL 270 is a one-component, liquid-applied, coldapplied and cold curing, polyurethane coating that cures toa seamless, permanent elastic waterproofing membrane.The MARISEAL 270is used on waterproofing applications as:WET AREAS (under tile)FOUNDATIONSTheis mainly used to waterproof details like:PIPESFLASHINGS AND 900 ANGLESLIGHTDOMESCHIMNEYSRETAINING WALLS, etcThewas specially developed to meet theeconomical demands of today’s construction industry, by providingthe highest product quality matched with a very interesting pricing.PHOTOVOLTAIC SYSTEMSWALL-FLOOR CONNECTIONSGUTTERS, etc.ETA 09/0241Waterproofing of potable Water TanksTheis the elastic and waterproofing coating ofthe system for potable water tanks, water channels and sewagetanks.Theis a two-component, odourless, solvent-free,liquid-applied, polyurethane coating that cures to a seamless,permanent elastic waterproofing membrane.Theis used on waterproofing applications as:WATER TANKSWATER CHANNELSSEWAGE TANKS, etcTheis certified for direct and permanentcontact with potable (drinking) water.By using theall complex roof details are quickly andsecurly waterproofed. MARIS POLYMERS, with over 60 years combinedexperience in developing polyurethane systems, have formulated theto meet modern constructiondemands.
Top Coat for Roofs, Balconies and TerracesTop Coat for Public Pedestrian AreasFor perfect waterproofing as well as optimum opticalresult, thetop-coat is applied over the mainMARISEAL waterproofing membrane, to give a decorativeand color-stable finish.Theis an elastic, pigmented, color stable,aliphatic polyurethane top-coat that is applied over the mainwaterproofing membrane, providing a glossy, decorative andeasy-to-clean surface.Theis color stable, UV-stable and weatherresistant.It has been tested and certified by the German State InstituteMaterialpruefanstalt MPA-Braunschweig, as a non-yellowing,color stable and non-chalking coating.The MARISEAL SYSTEM, can be applied on surfacesthat require a wear resistant and abrasion resistant finish,to withstand heavy pedestrian traffic conditions, as publicpedestrian walkways, stadiums, etc.This is accieved by using theover the mainMARISEAL waterproofing membrane.Theis a hard-elastic, pigmented colorstable, aliphatic polyurethane top-coat that is applied overthe main waterproofing membrane, providing a wearresistant finish that can withstand heavy pedestrian and lightvehicle traffic conditions.The use of theresults in an abrasionresistant, glossy and easy-to-clean surface which is colorstable, UV-stable and free of chalking.
ApplicationIMPRESSIVE REFERENCES IN ALL INDUSTRIESSOME OF THE PROJECTS IN WHICH MARIS POLYMERS PRODUCTS WHERE USED:AUTOMOTIVE1Surface PreparationCracks are filled with the MARIFLEX PU30 joint-sealant (step 1). The sealed crack is then covered with the MARISEAL waterproofing coating, andthen reinforced with a piece of MARISEAL FABRIC (step 2). The rest of the surface is then primed with the appropriate MARISEAL primer (step 3),depending on the substrate.VOLKSWAGENVOLKSWAGEN, WOLFSBURGVOLKSWAGEN, ZWICKAUAUDIBMWCITROENDAEWOOFIATHONDALADAABU DHABI FORMULA 1 TRACKMAZDAMERCEDES-BENZNISSANROVERCTR CITROEN PLAZADUBAI MOTOR CITYAUTOSTRADA, MESSINA SICILYCOMPUTERS AND ELECTRONICSAEGINTEL MICRO PROCESSORSDATA ELECTRONICSINTRACOMLOGIC DATAGENERAL BATTERIESNETCOMPILUXPETROL, CHEMICALAND HEAVY INDUSTRYWaterproofing of Critical AreasCritical areas, such as wall-floor connections, pipe outlets, chimneys, siphons etc. must first be waterproofed with the MARISEAL waterproofing coating andthen reinforced with the MARISEAL FABRIC. The MARISEALFABRIC is rolled over the still wet waterproofing coating and pressed in to soak (step 4, 5).Enough MARISEAL coating is then applied until full saturation of the fabric (step ORFALU-SUISSEKONTIELFICOGASPROM HEAD OFFICEMELKO PETROLIOUMRUSSIAN BELOGIARSKA NUCLEAR STATIONACP CHEMICALSUPER MARKETSSurface WaterproofingThe MARISEAL waterproofing coating is being applied on the prepared surface (step 7). The MARISEAL FABRIC is applied as previously described (step8, 9, ULOSMETROTRESCOIDEA STORESWOOD AND FURNITURE ULOSANIMAL AND FISH BREEDINGFARMSAGGELAKISLETSOSSEA FARM IONIONOLYMPOS SEA FARMFREEZERSARCTIKIGROBAL INT.THERMOVENT,Top-coat applicationAfter curing of the waterproofing membrane, the appropriate MARISEAL top-coat is being applied on the entire surface (step 11).FOOD INDUSTRYCOCA COLAPEPSISOGAT, SUGAR PROCESSINGKATOGI, WINESBOUTARIS, WINESHBI, FRESH JUICESARACHTHOS, FRESH JUICESBOSINAKIS, BAKERY PRODUCTSKARAMOLEGOS, BAKERY PRODUCTSBLUE BELL, FROZEN FOODSKORONA, PASTAFLOCA, SWEETSBEKA, MEAT PROCESSINGAFRICOFFEE, COFFEEHELLAS CAN, CANNED FOODSAEGEAN MUSHROOMSEL.PA., OLIVE OILBEF, SAUCESSILIGRADO, MILK PROCESSINGHOTELS AND TOURISTICHILTON HOTELINTERCONTINENTAL HOTELORIENTAL MANDARIN HOTELMARRIOT HOTELATLANTIS HOTEL AT THE PALM ISLANDHOTEL THEOXENIA PALACEHOTEL PRESIDENTHOTEL GRAND CHALETHOTEL SOSIMEXADA HOTELMARAKIA TOURISTIC VILLAGESMOUHA CLUBJUMEIRAH BEACH HOTELGLORIA HOTELGOKSU HOUSING COMPLEXADEM HAVVA HOTEL,TEXTILE AND CLOTHING INDUSTRIESBSBDIESELEROSPUTMANBOTEKS TEXTILEINDUSTRIES IN SEVERAL CATEGORIESEKSIOGLY ALMETSABA INDUSTRIALSSPRAY PACKTETRA PACKALEMCOJEWELER URAL FACTORYMETAL YAPI KONUTKALELI INSAATKRAVSIDONA BRIDGENOVURASK SANITARY LANDFILITIMEX FACTORYPRINTING ELISTRANSPORT AND AVIATIONOSE-GREEK RAILWAYSOLYMPIC AIRWAYSALEXANDRIA TRAM AUTHORITYBALLAUF LOGISTICSTRANMERE TRANSPORTSMESSINA AIRPORT SICILYPUBLIC BUILDINGSATHENS AIRPORTDUBAI INTERNATIONAL AIRPORTHIPPOKRATION HOSPITALEGYPTIAN CHAMBER OF COMMERCEBANK OF GREECEOSK-GREEK SCHOOL BUILDING AUTHORITYEGYPTIAN KHALADEEN GARDENSPRINCE TALLAL VILLA, CAIROCHELABINSK CITY BUSINESS CENTER, RUSSIAMAIN BUILDING OF COAST GUARD MESSINASICILY, ITALYCATHEDRAL RAGUSA, ITALYUS EMBASSY, SKOPJAOLYMPIC BATMINGTON STADIUMFOOTBALL STADIUM, BULGARIAASTRONOMY BUILDING, SINGAPORESEVERAL PUBLIC CHILDREN PLAYGROUNDSBARCELONA AIRPORT, SPAINNORWEGIAN REFUGEE PROJECT- HOUSINGPROJECT, LEBANONVOLLEY STADIUM CATANIA, SICILY ITALYUNIVERSITIESUNIVERSITY OF ATHENSUNIVERSITY OF ALEXANDRIAUNIVERSITY OF JERUSALEMUNIVERSITY OF PIRAEUSUNIVERSITY OF THESSALONIKITECHNION ENGEENIRING ACADEMY, ISRAELSAINT LUCIA UNIVERSITY, AUSTRALIABILFEN SCHOOL, TURKEYTECHNICAL UNIVERSITY, SLOVENIAUNIVERSITY OF OPORTO, PORTUGALUNIVERSITY OF BARCELONAMILITARYGREEK ARMYGREEK NAVYGREEK AIR FORCEWATER, ELECTRICITY AND TELECOMDEH, GREEK ELECTRICITY PROVIDEREYDAP, ATHENS WATER PROVIDERATHENS CENTRAL SEWAGE PLANT (PSITALIA)OTE, GREEK TELECOMMUNICATIONS PROVIDERTEL AVIV WATER PROVIDERCOSMETIC AND PHARMACEUTICAL INDUSTRIESLOREAL HELLASAGISELPENSHIPPINGSUPERFAST FERRIESMINOAN FERRIESHELLAS FERRIESALLIED MARITIMEBARCLEY SHIPPINGTHENAMARIS SHIPPINGWORLD WIDE OCEAN CARTERINGVANIMAR INC.OLYMPIC STADIUMSOLYMPIC BASEBALL STADIUM(USED IN THE OLYMPIC GAMES IN ATHENS 2004)OLYMPIC KARAISKAKI STADIUM(USED IN THE OLYMPIC GAMES IN ATHENS 2004)OLYMPIC VILLAGE, GREECEBRUNEI OLYMPIC STADIUMPAOK FOOTBALL STADIUMALEPPO FOOTBALL STADIUMAND MANY OTHERS
SUCCESSFUL PRESENCE IN OVER 45 COUNTRIES WORLDWIDEwww.marispolymers.comMARIS POLYMERS SAINDUSTRIAL AREA OF INOFITAGR-32011 INOFITA, GREECETEL.: 30 22620 32918-9, FAX: 30 22620 32040e-mail: info@marispolymers.grMARIS POLYMERS DEUTSCHLAND GmbHBorsinghauserstrasse 21D-44627 HerneGermanyTel: 49(0)800 6227777, Fax: 49(0)800 6228888e-mail: info@marispolymers.deMARIS POLYMERS FRANCE SARL35, Chemin de MontjeanF-94260 FresnesFranceTél: 33(0)146689200, Fax: 33(0)146689202e-mail: info@resines.euMARIS POLYMERS ASIA Pte Ltd37 Kallang Pudding Road, Block BTong Lee Bulding, 10-01ASingaporeTel: 65 67463528, Fax: 65 67463529e-mail: lancekhoo@marispolymers.gr
beka, meat processing africoffee, coffee hellas can, canned foods aegean mushrooms el.pa., olive oil bef, sauces siligrado, milk processing hotels and touristic hilton hotel intercontinental hotel oriental mandarin hotel marriot hotel atlantis hotel at the palm island hotel theoxenia palace hotel president hotel grand chalet hotel sosimex ada hotel
1) Waterproofing should be fully bonded and continuous. 2) Compatibility is crucial. Quality is crucial. 3) Get expert input early - Sika has over 100 years of global waterproofing expertise on tap. Version: 0217 BELOW GROUND WATERPROOFING TO BS:8012/2009 Balcony waterproofing over non-habitable space connection to facade Balcony / podium deck
1.1 Hydrathane Exterior Waterproofing Membrane is a liquid-applied waterproofing membrane for use under ceramic or stone tile finishes on external decks and balconies. Scope 2.1 Hydrathane Exterior Waterproofing Membrane has been appraised for use as a deck and balcony waterproofing membrane for buildings within the following scope:
3.7 Waterproofing details in horizontal and vertical areas 16 3.8 Installation of waterproofing membranes 19 3.9 Compartment waterproofing with waterstops 20 4. Welding methods 23 5. Quality control 24 6. Cleaning and inspection of completed waterproofing 26 7. Protection of completed waterproofing 26 8. Proposal for bills of quantities 28 9.
Basic Chemistry Reaction of 1:1 mixing of two liquids 2012 SPFA - Spray Polyurethane Foam Overview . BLOW: Expansion of liquid into a cellular structure a. MDI chemical blowing agent (H 2 O) CO 2 gas b. Exothermic heating of polymerization transforms liquid physical blowing agent (HFC) into vapor SET: Polymerization of liquid into solid polyurethane a. MDI polyols polyurethane Other .
Guidelines for Waterproofing Underground Structures Table of Contents: 1.00 Introduction 1 2.00 Waterproofing: A System Approach 1 3.00 Waterproofing Systems 2 . 4.10 Vinyl or PVC Waterstops 18 4.20 Swelling Rubber Waterstops 19 4.30 Injection Waterstops 22 5.00 Costs 24 5.10 Membrane Costs 24 . ii 5/8/2009 5.20 Waterstops 26 .
Waterproofing Details – Design Under Constrained Conditions Samuel Vesely, B.Sc. Key Words: Waterproofing details, constrained conditions, expansion joints Abstract The research and development (R&D) effort to develop high quality waterproofing materials is an ongoing, worldwide, process.
790-11 waterproofing membrane on split-slab construction Blueskin WP200 waterproofing on foundation walls of new construction CAPITOL VISITORS CENTER Henry integrated waterproofing systems are the choice of some buildings like this one: the three-level, underground complex is the biggest expansion in the Architect: RTKL Associates, Inc. HOW .
Oct 23, 2020 · SWR Institute Below-Grade Waterproofing Manual Sealant, Waterproofing & Restoration Institute 1999 10 The Manual of Below-Grade Waterproofing Systems 2nd Edition Justin Henshell 2016 * The references listed above are only some of