Data Sheet System Pro M Compact Miniature Circuit Breaker SU200 M For .

Data SheetThe miniature circuit breaker SU200 Mis ABB’s solution for UL 489 branchcircuit protection up to 480 Y/277 V ACand 96 V DC. This circuit breaker isan all-round device for AC and DCapplications for universal use in NorthAmerican and global markets due toits approvals acc. to the internationalstandards UL, CSA and IEC. Moreover,SU200 M is fully compatible withSystem pro M compact UL m pro M compact Miniature Circuit Breaker SU200 Mfor branch circuit protection acc. to UL 489Features High performance MCB with 10 kA interrupting capacityacc. to UL 489 / CSA 22.2 No. 5 and 15 kA breakingcapacity acc. to IEC/EN 60947-2 Certified up to In 40 A at 480 Y/277 V AC acc. toUL 489 / CSA 22.2 No. 5 Certified for AC and DC use acc. to UL and CSA 40 C reference temperature acc. to UL and CSA Current limiting acc. to UL 489 Clear contact position indication in red/green (”real CPI“)Standards and approvalsStandardsUL 489CSA 22.2 No. 5IEC/EN 60947-2ApprovalsUL 489USCSA 22.2 No. 5CAVDEDECCCCN

Miniature Circuit Breaker SU200 MTechnical dataGeneral DataStandardsPolesTripping characteristicsRated current InRated frequency fRated insulation voltage Ui acc. to IEC/EN 60664-1Overvoltage categoryPollution degreeIEC/EN 60947-2Rated operational voltage UeMax. power frequency recovery voltage UmaxMin. operating voltageRated ultimate short-circuit breaking capacity IcuRated service short-circuit breaking capacity IcsUL 489, CSA 22.2 No. 5, IEC/EN 60947-21P, 2P, 3P, 4PC, K, Z0.2 - 63 A50 / 60 Hz, DC (0 Hz)250 V AC (phase to ground), 440 V AC (phase to phase)III3AC1P: 230 V AC; 2P, 3P, 4P: 400 V AC1P: 253 V AC; 2P, 3P, 4P: 440 V AC12 V AC, 12 V DC15 kA 40 A: 11.25 kARated impulse withstand voltage Uimp (1.2/50µs) 40 A: 7.5 kA4 kV (test voltage 6.2 kV at sea level, 5 kV at 2,000 m)Dielectric test voltageReference temperature for tripping characteristicsElectrical endurance2 kV (50 / 60Hz, 1 min.)30 CIn 30 A: 20,000 ops (AC), In 30 A: 10,000 ops. (AC);UL / CSARated voltageRated interrupting capacity acc. to UL 1077Short-circuit current rating acc. to UL 489ApplicationReference temperature for tripping characteristicsElectrical enduranceMechanical dataHousingToggleContact position indicationProtection degree acc. to DIN EN 60529Mechanical enduranceShock resistance acc. to IEC/EN 60068-2-27Vibration resistance acc. to IEC/EN 60068-2-6Environmental conditions (damp heat cyclic) acc. to IEC/EN 60068-2-30Ambient temperatureStorage temperatureInstallationTerminalCross-section of conductors (top/bottom)Cross-section of busbars (top/bottom)Torque1 cycle (2 s - ON, 13 s - OFF, In 32 A), 1 cycle (2 s - ON, 28 s - OFF, In 32 A)AC1P: 277 V AC up to 40 A for C, Z char.,AC277 V AC up to 35 A for K char., 240 V ACAC2P, 3P, 4P: 480 Y / 277 V AC up to 40 A for C, Z char.,AC480 Y / 277 V AC up to 35 A for K char., 240 V ACDC1P: 48 V DC; 2P: 96 V DC (2p in series)–10 kA–40 C6,000 ops (AC), 6,000 ops. (DC); 1 cycle (1 s - ON, 9 s - OFF)Insulation group II, RAL 7035Insulation group II, black, sealableReal CPI (green OFF / red ON)IP20*, IP40 in enclosure with cover20,000 ops.25 g - 2 shocks - 13 ms5g - 20 cycles at 5 150 5 Hz with load 0.8 In28 cycles with 55 C/90-96% and 25 C/95-100%-25 55 C-40 . 70 CFailsafe bi-directional cylinder-lift terminalsolid, stranded: 35 mm² / 35 mm²flexible: 25 mm2 / 25 mm218 – 4 AWG10 mm² / 10 mm²18 – 8 AWG2.8 NmAWG 18-16: 13.3 in-lbs.AWG 14-10: 17.7 in-lbs.ScrewdriverMountingMounting positionSupplyDimensions and weightMounting dimensions acc. to DIN 43880Pole dimensions (H x D x W)Pole weightCombination with auxiliary elementsAuxiliary contactSignal contactShunt trip*Also fulfilling the requirements acc. to the protection degree IPXXB2 - 2CDC002177D0203AWG 8-4: 39.8 in-lbs.No. 2 PozidriveOn DIN rail 35 mm acc. to EN 60715 by fast clipanyoptionalMounting dimension 3111 x 69 x 17.5 mmapprox. 125 gYesYesYes

Miniature Circuit Breaker SU200 MTripping characteristicsTripping characteristicsAcc. toTrippingcharacteristicsRatedcurrentInIEC/EN 60947-2 CThermal onventionaltrippingcurrentI20.5 to 63 A 1.05 · In1.3 · InK0.2 to 63 A 1.05 · InZ0.5 to 63 A 1.05 · InElectromagnetic release 2)1)1.3 · In1.3 · InTrippingtimeRange ofinstantaneoustrippingTripping time 1h5 · In 0.2 s 1h 1h3) 1h 1h3) 1h3)10 · In 0.2 s 0.2 s14 · In 0.2 s 0.2 s3 · In 0.2 s10 · In2 · In1)The thermal releases are calibrated to a nominal reference ambient temperature of 30 C.In the case of higher ambient temperatures, the current values fall by approx. 6 % for each 10 K temperature rise.2)The indicated tripping values of electromagnetic tripping devices apply to a frequency of 50/60 Hz. The thermal release operates independent of frequency.3)As from operating temperature (after I1 1h)Z characteristic2CDC022004F02142CDC022002F0214K characteristic2CDC022005F0214C characteristic2CDC002177D0203 - 3

Miniature Circuit Breaker SU200 M DeratingDeviating ambient temperatureThe rated value of the current of a miniature circuit breaker ofSU200 M series refers to a reference ambient temperature of30 C acc. to IEC/EN 60947-2 and 40 acc. to UL/CSA. TheStandardRatedcurrentInAIEC/EN60947-2UL 4890.2 *0.3 *0.50.75 *11.6234568101315162025303235405060630.2 *0.3 *0.50.75 *11.623456810131516202530323540506063Maximum operating current at ambient temperature TA- 40 2.7946.8153.4966.8780.2484.25- 30 .2745.1451.5864.4877.3881.24- 20 7943.5349.7462.1874.6178.35- 10 3741.9747.9759.9671.9575.550 0140.4746.2657.8269.3972.85* Current ratings 0.2, 0.3 and 0.75 A available with K characteristic only4 - 2CDC002177D0203following table shows derating factors for ambient temperaturefrom -40 C to 70 C for the characteristics C, K, Z.10 6939.0344.6155.7666.9170.2520 4137.6443.0153.7764.5267.7530 51.8562.2265.3340 2354050606350 7138.5248.1557.7860.6760 4637.0946.3755.6458.4270 2635.7244.6553.5856.26

Miniature Circuit Breaker SU200 M DeratingInfluence of adjacent devices, internal resistance andpower lossInfluence of adjacent devicesIf several miniature circuit breakers are installed directly sideby side with high load on all poles, a correction factor has tobe applied to the rated current (see table). If distance piecesare used, the factor is not to be considered.No. of adjacent devicesFactor F112, 30.94, 50.8 60.75Internal resistance and power loss per poleC, K characteristicsRated currentZ characteristicsPower lossInAInternal resistanceper poleRimΩPower lossPvWInternal resistanceper ternal resistances are subject to application-specific and environment-specific conditionsand are therefore to be considered as typical values.2CDC002177D0203 - 5

Miniature Circuit Breaker SU200 MCurrent limiting – Ipeak and I2t values acc. to UL 489CharacteristicKC, Z6 - 2CDC002177D0203Nominal currentVoltageCurrentAVA 35480Y/27710000 35240 40480Y/277 40240Power FactorI PeakI .45-0.59.580.0100000.45-0.58.0110.0

Miniature Circuit Breaker SU200 MAccessories and dimensional drawingAccessory overviewSU200 MHAuxiliary contactS2C-H6RU2CDC092011F0014(change-over contact)S/HSignal contactS2C-S6RUSTShunt tripS2C-A.UThe certification of the Accessories has been done with oneaccessory only.The number of electrical operations is limited to 4,000operations for the maximum combinations and thecombinations including shunt trips.2CDC022007F0014Dimensional drawing2CDC002177D0203 - 7

Miniature Circuit Breaker SU200 MOrdering data characteristic CNumberRatedof polescurrentTypeOrder codeWeightPackingper 2CDC021045S00142CDC021004S0014128 - 05042CDS272337R06042CDS272337R0634

Miniature Circuit Breaker SU200 MOrdering data characteristic CNumberRatedof polescurrentTypeOrder codeWeightPackingper CDS274337R06042CDS274337R06342CDC002177D0203 - 9

Miniature Circuit Breaker SU200 MOrdering data characteristic KNumberRatedof polescurrentTypeOrder codeWeightPackingper 00142CDC021004S00141210 - S272337R0607

Miniature Circuit Breaker SU200 MOrdering data characteristic KNumberRatedof polescurrentTypeOrder codeWeightPackingper 177D0203 - 11

Miniature Circuit Breaker SU200 MOrdering data characteristic ZNumberRatedof polescurrentTypeOrder codeWeightPackingper 2CDC021045S00142CDC021004S00141212 - 05782CDS272337R05882CDS272337R0608

Miniature Circuit Breaker SU200 MOrdering data characteristic ZNumberRatedof polescurrentTypeOrder codeWeightPackingper CDS274337R05882CDS274337R06082CDC002177D0203 - 13

ABB STOTZ-KONTAKT GmbHEppelheimer Straße 8269123 Heidelberg, GermanyPhone: 49 (0) 6221 7 01-0Fax: 49 (0) 6221 7 01-13 25E-Mail: info.desto@de.abb.comYou can find the address of yourlocal sales organization on theABB home pagehttp://www.abb.com/contacts- Low Voltage Products and SystemsNote:We reserve the right to make technical changesor modify the contents of this document withoutprior notice. With regard to purchase orders, theagreed particulars shall prevail. ABB AG doesnot accept any responsibility whatsoever forpotential errors or possible lack of information inthis document.We reserve all rights in this document and inthe subject matter and illustrations containedtherein. Any reproduction, disclosure to thirdparties or utilization of its contents – in wholeor in parts – is forbidden without prior writtenconsent of ABB AG.Copyright 2016 ABBAll rights reservedBrochure number 2CDC002177D0203 (01/16-pdf)Contact us

System pro M compact Miniature Circuit Breaker SU200 M for branch circuit protection acc. to UL 489 Data Sheet The miniature circuit breaker SU200 M is ABB's solution for UL 489 branch circuit protection up to 480 Y/277 V AC and 96 V DC. This circuit breaker is an all-round device for AC and DC applications for universal use in North