Installation And User Manual Ge Oodbridge

1y ago
21 Views
2 Downloads
1.90 MB
16 Pages
Last View : 1d ago
Last Download : 2m ago
Upload by : Averie Goad
Transcription

EGEGDIRINSTALLATION AND USER MANUALBDRWOODBRIDGEOOWRemote Control SAGESTOPBDOOWTEMPERATUREWATERDRYSEATAUTOWRThank you for choosing our product.Please read the instructions carefully beforeRinstallation and keep it available for future maintenance or reference.EGEGDIRBDOOWCustomer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time)Or Email: 723 REV. 2W

EGRDIRWOODBRIDGEREMOTE CONTROL ILLUSTRATIONBDDORemote control installationOOWRemote control hanger installationOW(1)Drill two holes, which are parallel to the floor, on the wall with depth of 35mm,and center distance between two holes of 106mm.Make sure end-user be able to reach theremote control when sitting on the seat.106mmREGDIRBD(2)Insert expansion tube into the hole on the wall, install the hanger to the wall witha screw, and paste the double faced adhesive tape on hanger to the wall, tightenthe screw.mmOOWDO106OWHoleHoleR(3)Install battery and place remote control to the REWATER DRYSEATBDThe position ofanti-theft screwDONotice:Please do not install and use the product in moist place, such as steamroom, and prohibit to place in the space where is easily got wet.In public place, please use screw to fix the remote control with bracket inavoid remote control missing.OOW1www.woodbridgebath.comOW

EGGIDRDIRREMOTE CONTROL ILLUSTRATIONBWOODBRIDGERBDORemote control illustrationOWFlush buttonRearEnergy saver Nozzle cleaningREGDIRZLENOZ INGANCLERGYENE RSAVEBAVERGY SENERFront9 H3 PRESSUPSTODRYSEATGIDMassageAGEMASSDRYOWAuto rear/front cleaningAuto Front cleaningAuto rear cleaningWater pressure adjustmentTemperature adjustmentAdjustment of nozzle positionRWater temperature,Dry temperature, Seat temperatureTemperatureEGStopLid close / seat closeLid open / seat closeDIRBLid open / seat openGIDRBNotice:If the toilet you buy is with auto open/close function, the remote control is asthe picture above. Please refer to page 8 for operation method and turningoff auto open/close function.DOOWwww.woodbridgebath.com2

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGERear/Front cleaningPress “Rear”/“Front” button, the water comes out of wand to clean the rear/frontportion of body. It automatically stops after a cycle of cleaning. If press “STOP”button when using, the function will stop immediately.MassagePress “MASSAGE” button to activate massage function, the nozzle moves forwardand back to extend the cleaning scope; Press “MASSAGE” button again to stop thefunction.Drying OperationPress “DRY” button, warm wind comes out of wand to dry. After a cycle or userleaves the seat, it automatically stops.Rear6 9 HR .com

EGRDIRWOODBRIDGEREMOTE CONTROL ILLUSTRATIONRBBDDOOAuto functionOWFull-automatic function can be achieved by three “AUTO” buttons, convenientand practical. User can pre-set the suitable nozzle position, water pressureand temperature and save the setting. Full-automatic function will be activated bypressing the related function button when using afterwards.REGDIRBDAGEMASSRBDOAUTOOOWRAuto rear cleaningRear cleaning 90sDry 180sAutomatic stopDry 180sAutomatic stop(Refer to page 11 for automatic setting detail)EGDIRFront cleaning 90s(Refer to page 13 for automatic setting detail)OBDRear cleaning 90sFront cleaning 90sRBDry 180sDOAutomatic stop(Refer to page 14 for automatic setting detail)OWwww.woodbridgebath.com4

EGEGRIDDIRREMOTE CONTROL ILLUSTRATIONWOODBRIDGEBDEnergy saverOOWSetting energy saver timePress “ENERGY SAVER” button, LCD screen shows energy saver and figures. Itshows three options of energy saver period as 3-6-9-off, which can be selectedaccordingly. For example, user can set from 9:00 to 15:00 as energy saveraccording to following operation.Renergy saver icon(1)Press“ENERGY SAVER”button, LCD screen shows“ENERGY SAVER” icon.EGIDRGYENE RSAVEENERGYSAVERPSTODIRPRESSUREPERTEMEATURYR DRWATEEGENERGY SAVER 3 HZLENOZ GY SAVER”button again, LCD screen shows figure “6”, and the “ENERGY SAVER”icondisappear after 3 seconds, the setting succeeds. The toilet enters the energy saver mode from 9:00 to15:00 every day. During this period, power light is off, and the energy saver light is on. It goes back toOOWnormal operation mode after energy saver time.ENERGY SAVEREnergy saver light is on6 HPOWERENERGY SAVEREnergy saver timeR9:00PRESSUREEGWATERIDR15:00POSITIONDRYEGThe toilet enters the energy savermode from 9:00 to 15:00.SEATDIR(3)Cancel energy saver set: Press“ENERGY SAVER”button continuously until this function iscancelled. (Nothing display on the screen.)Energy saver:The toilet will be under energy saver mode automatically after setting. Under energy saver mode,BDseat temperature is on low temperature status (first level) to achieve energy saver.Notice:OOWIf user sits on the seat, the energy saver mode is paused, and enters into the function mode, theseat starts to heat immediately (under opening seat temperature circumstance). The energy saver moderestores after user leaves.When the energy saver mode is set, the icon disappears automatically, which is normal set.5www.woodbridgebath.com

EGRDIRWOODBRIDGEREMOTE CONTROL ILLUSTRATIONBDSpray nozzle position adjustmentOOWOOWDuring “REAR” or “FRONT”, press spray nozzle button of“ ” and “ ”, to move the position forward and backward by adjusting 5 levels.Water pressure adjustmentRDuring “REAR” or “FRONT”, press water pressure button of “ ” and “-”, to adjustpressure for rear and front cleaning.EGDIRAutomatic deodorizationBDRemark:The deodorization function starts to work automatically as the user sits on the seatand stops automatically 3 seconds after the user leaves the seat. When drying, thefunction of automatic deodorization stops.OOWOOWMassageRZLENOZ OSITIONOOW6

EGRDIRDIRREMOTE CONTROL ILLUSTRATIONWOODBRIDGEBDTemperature adjustmentGYENERRSAVEBDOOWLENOZZ ter temperature adjustment:Press “TEMPERATURE” button one time, “WATER ”light is on,icon on the screen WATER lights on, then adjustOOWwater temperature by “ ”, “-” button. It is regarded asTEMPERATUREWATERDRYoperation completed if there is no operation in 5 seconds,SEATPRESSUREPOSITIONand then “WATER ” light is off, andicon disappears.Long press “-” button until the “WATER ” icon disappearsWATERDRYSEATto close the “WATER ” function.Press “TEMPERATURE” button twice, “DRY ” light ison, andRTEMPERATUREWATERDRYEGoperation completed if there is no operation in 5seconds, and then “DRY ” light is RYicon on the screen lights on, then adjustwind temperature by “ ”, “-” button. It is regarded asSEATWATERDRYicondisappears. Long press “-” button until the “DRY ” icondisappears to close the “DRY ” function.DIRPress “TEMPERATURE” button three times, “SEAT ”light is on, andSEATicon on the screen lights on, thenBDadjust seat temperature by “ ”, “-” button. It is regardedas operation completed if there is no operation in 5SEATPRESSUREPOSITIONseconds, and then “SEAT ” light is off,OOWicondisappears. Long press “-” button until the “SEAT ” iconWATERDRYSEATdisappears to close the “SEAT ” function.www.woodbridgebath.com

EGEGRDIRREMOTE CONTROL ILLUSTRATIONWOODBRIDGEBDFull flushOOWWPress “FLUSH” button to activate full flushing.RAuto lid open/close (Only for toilet with this function)Press “” button to close seat cover.Press “” button to open lid and close seat.Press “” button to open lid and seat.EGREGDIRBDOOWWNozzle cleaningREGZLENOZ INGANCLERGYENE RSAVEGENER6 9 HER 3Y SAVRERWATETEMRYER DWATONPOSITIPRESSUPSTOETURERARDRYEGSEATDIRSEATLid close / seat closePLid open / seat openLid open / seat closeBDOOWwww.woodbridgebath.comW8

EGRDIRWOODBRIDGEREMOTE CONTROL ILLUSTRATIONBDDONozzle cleaningOOWOWREGDIRZLENOZ INGANCLERGYENE STOEATURPER6 9 HR 3SAVEDRYDRYSEATAUTODOSEATOWTEMNozzle self-cleaning by quick press:Quick press “NOZZLE CLEANING”button, the nozzle self-cleans for a whileand moves to the front position (nospray). People can continue to cleannozzle manually.RDIREGself-clean for90 seconds.BDOOW9Nozzle self-cleaning by long press:Long press “NOZZLE CLEANING” button,the spray won’t move forward and nozzleself-cleans for 90 seconds.www.woodbridgebath.comOWDO

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGESet Auto FunctionActivate/Deactivate some functions with combination buttonAuto open/closePress and hold “STOP” button (step 1), then press and release “” ,button (step 2) ,it is the mode of auto open/close, lastly release the “STOP” button (step 3). Repeatabove action to stop this function. (This key combination is only for toilet seat with autoopen/close function. The default setting of auto open/close is in the off status,so itneeds to be turned on at the first time use.)Step 2: Press then ReleaseStep 1: Press and HoldStep 3: ReleaseZLENOZ INGANCLERGYENE RSAVEVERGY SAH3 6 9ENERNPRESSUPSTOWATERRRATUPETEMRYER DPOSITIOREDRYSEATSEATE WATActivate/Deactivated Night lightTo activate/deactivate the light, press and hold the “STOP” button (step 1), then pressand release the “DRY” button (step 2) , lastly release the ‘STOP” button(step 3). Makesure you hear a beep sound to confirm the setting is completed or you will have torestart the same process again.Step 1: Press and HoldStep 3: EPOSITIONStep 2: Press then se note night light feature is default at the off status because the room must becompletely dark for the light to turn on. Repeat the process and the night light willswitch to intelligent status. Repeat above process constantly, the night light will switchbetween off status and intelligent status.www.woodbridgebath.com10

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGESet Auto FunctionSet automatic Rear cleaning functionThe default setting of automatic function is water pressure on level three, nozzleposition on level three, water temperature, wind temperature and seat temperatureon level three, the massage function is in the off state. User can re-set based onpersonal preference.(1)Adjust water pressure, nozzle position, temperature by function button in belowgrey circle, and open/close massage TIONPRESSUREWATERTEMPERATUREWATER DRYDRYPOSITIONSEATSEATWATERDRYSEATFor example, the nozzle position ison level 2, and massage function isopen; the water pressure is on level4; water temperature is on level 2,while dry temperature and seattemperature are on level 1.(2)After setting is completed, long press rear cleaning automatic button for 3seconds to save the setting.(3)After above steps, quick press “ ” afterwards when using, LCD displays theprevious saved settings of rear cleaning level, temperature level and massagestatus. By this time, the toilet operates rear cleaning 90s, and then dry 180sautomatically without pressing other buttons.(4)During automatic rear cleaning, user still can change the level, temperatureand massage status, and press “REAR” button 3 seconds to save thenew settings.www.woodbridgebath.com11

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGESet Auto FunctionQuiet modeTo activate/deactivate the Quiet mode, press and hold the “STOP” button (step 1),then press and release“MASSAGE” button (step 2), lastly release the “STOP” button(step 3). Make sure you hear a beep sound to confirm the setting is completed or youwill have to restart the same process again.Repeat the process to start buzzer function.Step 1: Press and HoldStep 3: ReleaseENERGYSAVERstep 2: Press MPERATUREWATERDRYDRYPOSITIONSEATAUTOSEATUser codeThe user code needs to be set to avoid disturbance from remote controls when morethan one toilet is use in the house.Turn on the toilet for setting while turn off others.(1) Press and hold “STOP”button (step 1) and then press and release “REAR” button(step 2), lastly release “ STOP” button (step 3) to enter to user code setting.Theremote control shows only water pressure and spray position level. Characters areblinking on the screen.(2) Press water pressure buttons of “ ”and “-”to choose user code 1-9.(3) Press and hold “STOP”button and then press and release “REAR” button again,lastly release the “STOP” button and remote control will save the setting and exituser code setting window,the buzzer will ring “click” to indicate successful setting.The sum of water pressure and position level on LCD is the user code.Restart toclear the user code and resetAutomatic flush buttonPress and hold “STOP” button (step 1)and then press and release “FLUSH”button (step 2), lastly release “STOP”button (step 3) to start or closeautomatic flushing function.Whenthe automatic flushing function isturned on, toilet will automaticallyflush after detecting user sitting formore than 6 seconds and leavingthe seat for more than 3.5 seconds.12Step 2: Pressthen ReleaseZLENOZ INGANCLEH3 6 9Step 1: Press and HoldStep 3: ReleaseRGYENE RSAVEENERVERGY SAREPRESSUPSTOWATERATERRE SEAT

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGESet Auto FunctionSet automatic Front cleaning function(1)Press spray nozzle position adjustment button to adjust nozzle to suitableposition; Press “ ”, “-” to adjust water pressure; set temperature level; open/close massage function.(2)Press “” front cleaning automatic button for 3 seconds, see below picture,and save the setting.(3)After above steps, quick press “” afterwards when using, LCD displaysthe previous saved settings of front cleaning level, temperature level andmassage status. By this time, the toilet operates rear cleaning 90s, andthen dry 180s automatically without pressing other buttons.(4)During automatic front cleaning, user still can change the level, temperatureand massage status, and press “FRONT” button 3 seconds to save thenew settings.13www.woodbridgebath.com

RREMOTE CONTROL ILLUSTRATIONWOODBRIDGESet Auto FunctionSet automatic Rear and Front cleaning combination functionNote: During using toilet, user can find the suitable level and temperature aftercomparing repeatedly. Please set the automatic Rear and Front cleaningcombination function during using toilet.The first stage: rear cleaning 90s(1)Automatic Rear and Front cleaning combination function includes rearcleaning 90s, front cleaning 90s and drying 180s. User can adjust leveland temperature in different stages.1. After user sits on the toilet, press automatic Rear and Frontcleaning button, it starts to rear cleaning about 90s.2. Adjust nozzle position, water pressure, wind temperature,seat temperature and open/close massage function duringrear cleaning.3. After adjust the parameters, remote control saves the parametersunder the first stage.4. During adjusting, if user adjusts many times, the remote controlsaves the latest parameter.The second stage: front cleaning about 90s(2)After finishing rear cleaning, toilet enters front cleaning stage automatically.User can set nozzle position, water pressure, temperature and open/closemassage function, and the remote control saves the latest parameterunder the second stage.The third stage: Drying about 180s(3)After finishing front cleaning, toilet enters drying stage automatically. Usercan set wind temperature, and the remote control saves the latest parameterunder the third stage.(4)After set all parameters, quick press “ ” button afterwards when using, LCDdisplays the previous saved settings. By this time, the toilet operates rearcleaning, front cleaning and drying automatically by one-button operation.If user needs to change previous settings, please repeat step 1-3.AUTOwww.woodbridgebath.com14

EGDIRRBDDIRREMOTE CONTROL ILLUSTRATIONWOODBRIDGEBDSet Auto FunctionOOWRemark:By pressing the button, the signal indicator will flash which means the signal is sentout;Then the buzzer rings “click” means the main unit receives the signal andexecutesthe instruction. If the signal indicator doesn't flash, that means the button is notefficiently pressed and needed to be re-pressed. If the buzzer does not ring, thatmeans the main unit doesn’t receive the signal. Please regulate the remote controldirection and re-press the button.RIn case of power cut during wand’s spray operation, the wand cannot go back to place,please wait until the power is reset. In case of a power cut for a long period, pleasepush the wand softly back by hand. Do not push hard, to avoid damage to wand andelectrical machine.EGDIRDIRThe body should touch the seat and the buzzer rings “click”, which means functionsof front cleaning, rear cleaning and drying are in operation. The nozzle will continueto spray for 1-2 seconds after user stands up during spray operation, so please press"STOP" button before standing up.BDBDUse nozzle self-cleaning function after user leaves the seat. After cleaning, if userdoesn't press "NOZZLE CLEANING" or "STOP" button, nozzle wand will go backafter 10 minutes or user sits on the seat.OOWREGDIRDIRBDBDOOWThank you for using WoodBridge products!Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time)Or Email: help@woodbridgebath.comwww.woodbridgebath.com

The toilet enters the energy saver mode from 9:00 to 15:00. Energy saver light is on Energy saver Setting energy saver time Press "ENERGY SAVER" button, LCD screen shows energy saver and figures. It shows three options of energy saver period as 3-6-9-off, which can be selected accordingly. For example, user can set from 9:00 to 15:00 as .

Related Documents:

Morphy Richards Fastbake Breadmaker 48280 User Manual Honda GCV160 User Manual Canon Powershot A95 User Manual HP Pocket PC IPAQ 3650 User Manual Navman FISH 4200 User Manual - Instruction Guide Jensen VM9021TS Multimedia Receiver User Manual Sanyo SCP-3100 User Manual Honda GC160 User Manual Canon AE-1 Camera User Manual Spektrum DX7 User Manual

Ademco Passpoint Plus User Manual Morphy Richards Fastbake Breadmaker 48280 User Manual Honda GCV160 User Manual Canon Powershot A95 User Manual HP Pocket PC IPAQ 3650 User Manual Navman FISH 4200 User Manual - Instruction Guide Jensen VM9021TS Multimedia Receiver User Manual Sanyo SCP-3100 User Manual Honda GC160 User Manual Canon AE-1 Camera .

E-816 DLL Manual, PZ120E E-621.CR User Manual, PZ160E E-816 LabVIEW Software Manual, PZ121E E-621.SR, .LR User Manual, PZ115E Analog GCS LabVIEW Software Manual, PZ181E E-625.CR User Manual, PZ166E PIMikromove User Manual, SM148E E-625.SR, .LR User Manual, PZ167E E-665 User Manual, PZ127E E-801 User Manual

5.3. STAFInst Uninstall 6. Platform Installation Notes 6.1. Linux installation 6.2. AIX installation 6.3. HP-UX IA64 64-bit installation 6.4. IBM i 32-bit (previously known as i5/OS or OS/400) installation 6.5. z/OS installation 6.6. FreeBSD installation 6.7. Mac OS X installation 6.8. Solaris installation 7. Environment Variable Settings 7.1.

This installation manual is part of and shipped with the unit, and contains information on its safe installation. Read this installation manual completely before installing the unit. This installation manual must be kept available to installers at all times at the installation loca- tion. Keep this installation manual on hand throughout

user manual. The user manual will give you the information you need to operate the ap-pliance properly and safely. Carefully read this user manual prior to using the appliance. Keep the user manual AND the installation manual in a safe place. As a user you are only entitled to perform the work described in the user ma-nual.

Nov 11, 2010 · User Story 1 User Story 2 User Story 4 User Story 5 User Story 5 (Cont.) User Story 3 User Story 6 User Story 7 rint 1 User Story 8 2 User Story 1 User Story 2 User Story 4 . Process Template Light on security artifacts/documentati on. OWASP Making SDL-Agile Manageable Toolin

manual, icom 718 user manual, icom 7000 user manual, icom 705 user manual, icom bc-160 user manual, icom ic-41pro user manual Your Icom radio generates RF electromagnetic energy . manual contains important operating instructions for the IC-F14/ . FA-SC56VS: 150–162 MHz. EvaluationIcom IC-R30 Handheld Broadband Receiver, Easy to.