LIGHT LED - TME

LIGHT LED3030DZLxx SeriesLIGHT LED3030 Product Data SheetDZLxx SeriesCreated Date: 03 / 12 / 2015Revision: 0.0Preliminary1BNC-OD-C131/A4Created Date : 05/26/2007Revison : 1.01, 05/26/2008

LIGHT LED3030DZLxx Series1. DescriptionThe LiteON 3030 Product series is a wide beam angle standard-dimension package, combining the lifetime and reliabilityadvantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom andunmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.1.1 Features Package in 8mm tape on 7" diameter reels.Compatible with automatic placement equipment.Compatible with infrared and vapor phase reflow solder process.EIA STD package.I.C. compatible.Meet green product and Pb-free(According to RoHS)1.2 Available Part NumbersCCTPart KLTW-3030DZL576500KLTW-3030DZL6502Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series2. Package DimensionsPart No.Lens ColorSource 30DZL40OrangeInGaN . All dimensions are in millimeters.2. Tolerance is 0.2 mm (.008") unless otherwise noted.03Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series3. Absolute Maximum Ratings at Ta 25 CParameterSymbolRatingUnitCode4Po1320mWContinuous Forward CurrentIF200mAPulse Forward CurrentIFP200mAOperating Temperature RangePulse Forward CurrentStorage Temperature RangeTopr-40 100 CTstg-40 100 CTj 125 CPower DissipationJunction TemperatureNotes :1. 1/10 duty cycle, Pulse width 10μs.2. Forbid to operating at reverse voltage condition for long.3. It is recommended to follow de-rating curve to use maximum rating to ensure LED can operated normally.04Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4. Electro-Optical Characteristics4.1 Typical orrelated 123127131131129‘KTemperatureChromaticity CoordinatesLuminous Flux1-ΦvOptical EfficiencyηoptTyp.Color Rendering IndexCRIMin.Viewing Angle2θ1/2Forward VoltageThermal ResistanceVFRjslmlm/WIF 80-150mATyp.120degMin5.8Typ.6.3Max.6.6Typ.18V C/WNotes1. Luminous flux is the total luminous flux output as measured with an integrating sphere.2. Iv (flux v) classification code is marked on each packing bag.3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram.4. Caution in ESD:Static Electricity and surge damages the LED. It is recommended using a wrist band or anti-electrostaticglove when handling the LED. All devices, equipment and machinery must be properly grounded.5. CAS140B is the test standard for the chromaticity coordinates (x, y) & v.6. The chromaticity coordinates (x, y) guarantee should be added /- 0.01 tolerance7. CRI measurement allowance is 5, R9 005Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4.2 Forward Current vs. Lumen and VoltageLumen 151.1148.706Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4.3 Relative Spectral Power Distribution at Typical Current3000K5000K25degC25degC85degC85degC4.4 Radiation Characteristics0 100%90%30 Relative Intensity (%)80%70%60%60 50%40%30%20%10%0%90 6030 0 5010007Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4.5 Forward Voltage vs. Forward Current4.6 Color Shift vs. Forward Current Cool White Warm White08Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4.7 Forward Current Derating Curve vs. Ambient Temperature4.8 Relative Intensity vs. Junction Temperature09Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series4.9 Voltage vs. Junction Temperature4.10Color Shift vs. Junction Temperature010Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series5. Binning Definition5.1 Color Bin6500K5700K011Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx 00.360G140.3700.3800.390CIEx0.4000.410012Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx .440CIEx0.4500.460013Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx 0D13D21D22D32D23 D330.400D34D14 4700.4800.490CIEx014Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series Color RankTolerance on each Hue bin (x,y) is /- 0.01.Tolerance on each Hue bin (x,y) is /- 0.01.015Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx SeriesTolerance on each Hue bin (x,y) is /- 0.01.Tolerance on each Hue bin (x,y) is /- 0.01.016Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx SeriesTolerance on each Hue bin (x,y) is /- 0.01.Tolerance on each Hue bin (x,y) is /- 0.01.017Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx SeriesTolerance on each Hue bin (x,y) is /- 0.01.018Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series5.2 Flux Bin2700K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAMinMaxS1100108S2108S31183000K v Bin S1104114118S2114125130S3125135 v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAS1100108S2108S3118 v Bin v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAMaxS1104114118S2114125130S3125135Lumen (lm) at IF 150 mAMinMaxS1100108S2108S3118 5000KMin v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAMaxMax v Bin v Bin v Luminous Flux Spec. Table MinMin3500K4000K5700K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAMinMaxS1104114118S2114125130S31251356500K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF 150 mAMinMaxS1104114S2114125S3125135Tolerance on each Luminous Flux bin is /- 10%.019Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series5.3 Voltage BinVF Spec. TableForward Voltage (volts) at IF 150mAVF BinMinMaxV15.86.0V26.06.2V36.26.4V46.46.6Tolerance on each Forward Voltage bin is /- 0.1V6. Bin Code List※ Notes: Full Rank on LabelExample: V1 / S2/ D23Forward Voltage RankLuminous Flux RankColor RankV1S2D23020Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series7. Reflow Soldering CharacteristicsProfile FeatureLead Free AssemblyAverage Ramp-Up Rate (TSmax to TP)3 C / second maxPreheat Temperature Min (TSmin)150 CPreheat Temperature Max (TSmax)200 CPreheat Time (tSmin to tSmax)60 – 180 secondsTime Maintained Above Temperature (TL)217 CTime Maintained Above Time (tL)60 – 150 secondsPeak / Classification Temperature (TP)260 CTime Within 5 C of Actual Peak Temperature (tP)5 secondsRamp – Down Rate6 C / second maxTime 25 C to Peak Temperature8 minutes maxNotes:1.The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended handsoldering condition is 350 C max. and 2 secs max. for one time only, and the recommended reflow solderingcondition is 260 C max. and 5 secs max. for three times max.2.All temperatures refer to topside of the package, measured on the package body surface.021Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series3.The soldering condition referring to J-STD-020B. The storage ambient for the LEDs should not exceed 30 Ctemperature or 70% relative humidity. It is recommended that LEDs out of their original packaging aresoldered within one week. For extended storage out of their original packaging, it is recommended that theLEDs were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. Ifthe LEDs were unpacked more than 168hrs, baking the LEDs at 60 for 24hrs before soldering process.4.The soldering profile could be further referred to different soldering grease material characteristic. Thegrease vendor will provide this information.5.A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature.6.Although the recommended reflow conditions are specified above, the reflow or hand solderingcondition at the lowest possible temperature is desirable for the LEDs.7.LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dipsoldering method.022Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series8. Reliability TestNumber ofNoTest itemTest ConditionDurationDamagedSteady State Operating Life of1Ta 85 , IF 150mA1000 hrs0/20Ta -40 , IF 150mA1000 hrs0/20500 hrs0/20High Temperature (HTOL)Steady State Operating Life of2Low Temperature (LTOL)Pulse Wet Operating Life of60 /90%RH, IF 150mAHigh Temperature (PWHTOL)30mins ON/30min OFF4High Temperature Storage (HTS)100 1000 hrs0/205Low Temperature Storage (LTS)-40 1000 hrs0/206Thermal Cycle (TC)200 cycles0/20200 cycles0/203-40 100 30min dwell 5min transfer-40 100 7Thermal Shock (TS)20min dwell 20sec transfer8Solder Resistance (SR)265 , 3X MSL5sec0/209Solder Ability (SA)245 5sec, 95% coverage5sec0/1110Mechanical Shock (MS)1500G 0.5msec pulse shockeach 60/6axis11Random Vibration (RV)6G RMS, 10-2000Hz, 10minVariable Vibration Frequency10-2000-10Hz, log or linear sweep rate, 20G(VVF)for 1 min, 1.5mm each apply 3x per axisSalt Spread (SS)35 , 30g/m2/day1213per axis0/6over 6hrs0/648hrs0/11Criteria for Judging the DamageCriteria for JudgmentItemSymbolTest ConditionMin.Forward VoltageVFIF Typical CurrentLuminous FluxlmIF Typical CurrentCCX&CCYx,yIF Typical CurrentMax.U.S.L. x 1.1L.S.L. x 0.7Shift 0.02023Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series9. User Guide CleaningDo not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary,immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. Recommend Printed Circuit Board Attachment PadInfrared / vapor phaseReflow Soldering Package Dimensions of TapeNote: All dimensions are in millimeters (inches).024Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series Package Dimensions of ReelNotes:1. Empty component pockets sealed with top cover tape.2. 7 inch reel-1000 pieces per reel.3. Minimum packing quantity is 500 pieces for remainders.4. The maximum number of consecutive missing lamps is two.5. In accordance with EIA-481-1-B specifications.025Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4

LIGHT LED3030DZLxx Series10. Cautions10.1 ApplicationThe LEDs described here are intended to be used for ordinary electronic equipment (such as officeequipment, communication equipment and household applications).Consult Liteon’s Sales in advance forinformation on applications in which exceptional reliability is required, particularly when the failure ormalfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, trafficcontrol equipment, medical and life support systems and safety devices).10.2 StorageThis product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handingthis moisture sensitive product is important to ensure the reliability of the product.The package is sealed:The LEDs should be stored at 30 C or less and 90%RH or less. And the LEDs are limited to usewithin one year, while the LEDs is packed in moisture-proof package with the desiccants inside.The package is opened:The LEDs should be stored at 30 C or less and 60%RH or less. Moreover, the LEDs are limited tosolder process within 168hrs. If exceeding the storage limiting time since opened, that werecommended to baking LEDs at 60 C at least 24hrs. To seal the remainder LEDs return to package,it’s recommended to be with workable desiccants in original package.10.3 CleaningUse alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.10.4 Drive ModeAn LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDsconnected in parallel in an application, it is recommended that a current limiting resistor beincorporated in the drive circuit, in series with each LED as shown in Circuit A below(A) Recommended circuit.Circuit model ACircuit model B(B) The brightness of each LED might appear different due to the differences in the I-V characteristicsof those LEDs.10.5 ESD (Electrostatic Discharge)Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage:026Part No. : 3030DZLxx SeriesBNS-OD-FC002/A4