Network Integration Engine (NIEx9) For Third-Party Integrations Catalog .

1y ago
5 Views
1 Downloads
913.81 KB
12 Pages
Last View : Today
Last Download : 2m ago
Upload by : Brenna Zink
Transcription

Network Integration Engine (NIEx9) forThird-Party Integrations Catalog PageMS-NIE29xx-0, MS-NIE39xx-x, MS-NIE49xx-xJohnson 17 Release 9.0.7

NIEx9s for Third-party IntegrationsNetwork Integration Engines (NIEx9s) for third-party integrations enable IP connectivity and webbased access to Metasys Building Management Systems (BMSs).NIEx9s integrate standard building management communication technologies, including BACnet MS/TP, BACnet/IP, N2 Bus, Modbus , M-Bus (EN 13757-3), KNX, and third-party proprietaryprotocols to monitor and supervise a wide variety of HVAC, lighting, security, fire, electrical andthermal measuring, and access control equipment. For third-party integrations, one NIEx9 cansupport two Modbus integrations, two M-Bus integrations, a combination of one Modbus and oneM-Bus, or a single KNX integration. The NIEx9 comes from the factory with these three integrationspre-installed and pre-licensed, ready for your use.NIEx9s provide comprehensive equipment monitoring and control, scheduling, alarm and eventmanagement, energy management, data exchange, data trending, and data storage.NIEx9s feature an embedded Site Management Portal (SMP) UI, support multiple concurrent webbrowser sessions with password and permission access control, and provide the protection ofindustry-standard IT security.The NIE29 models enable compact and combined solutions including supervisory and controlcapacity. They can be used in smaller facilities where an all-in-one (supervisory, control, andintegration) platform is required.The NIE39/NIE49 models enable cost-effective NIEx9 connectivity and control in smaller facilities,and can extend NIEx9 supervisory functions in larger facilities.LonWorks versions of the NIE29s, NIE39s, and NIE49s are not supported at Release 9.0.7. Thesemodels will remain at Release 9.0. In addition, the NIE59 and NIE89 models are no longer availableat Release 9.0.7. The functionality provided by these models is now available with the NAE55and NAE85 at Release 10.0, respectively. For details, refer to the Network Engine Product Bulletin(LIT-12012138).Figure 1: NIE49 Network Integration EngineA tool called the VMD Generator Express (VGE) tool is available to create Vendor Model Definition(VMD) tables for specific third-party equipment using Modbus protocol. You can also purchasetables from the System Integration Services North America (SIS-NA) or the SIS-Europe office, or youcan create them with the VGE tool. The VGE tool requires certification and licensing for its use. Toobtain a license, attend the training listed in Table 9.Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page3

Features and BenefitsCommunication Using Commonly Accepted IT Standards at the Automation and EnterpriseLevelProvides the ability to install a system on your existing IT infrastructure within a building orenterprise and use standard IT communication services over the company intranet, WAN, orpublic internet with firewall protection.Web-Based User InterfaceProvides the ability to access system data in the NIEx9s from any supported web browsingdevice connected to the network, including remote users connected by dial-up telephone oran ISP.Support for Web Services at the Automation Network LevelProvides the ability to to develop facility-specific advanced data interfaces and applications.Embedded Site Management Portal System Configuration SoftwareProvides you with password-protected access to system configuration, monitoring,commanding, diagnosis, and cloud-based applications from any device with web browsersoftware without the need for separate workstation software.Improved Security with New Operating SystemProvides a higher level of protection from threats with the adoption of the Linux Buildrootoperating system, a full replacement of the recently expired Windows CE operating system.Supervision of Controller Networks Including BACnet MS/TP, BACnet/IP, N2 Bus, LonWorks,Modbus RTU, Modbus TCP, M-Bus (EN 13757-3) serial and IP, KNX IP, and third-party protocoldevicesSupports connectivity to open network standards for complete flexibility in the selection offield devices. The LonWorks NIE29, NIE39, and NIE49 models are not supported at Release9.0.7.Support for Dual TrunksSignificantly improves the flexibility and extends the investment of integrations to thirdparty equipment. The dual trunk feature potentially reduces the number of NIEx9s requiredon a project and allows you to add integrations to existing NIEx9s that are at Release 7.0and later. You can more easily adapt to the requirements of projects that have fewer devicesthat require integration but use separate networks and different protocols.4Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page

Ordering Information - NIEx9 ModelsTable 1: NIE29 Ordering Information (Release 9.0 or 9.0.7 Only)Product CodeNumberReleaseDescriptionMS-NIE29xx-x (basefeatures on eachNIE29)n/aEach NIE29 Series model requires a 24 VAC power supply andincludes one RS-232-C serial port, one USB serial port, oneSA Bus port, one RS-485 or LON port, one Ethernet port, andan MS-BAT1020-0 Data Protection Battery. Each NIE29 Seriesmodel supports 33 hard-wired Input/Output points. Up to twoports can be defined for third-party integration. The otherports have to be defined in order to use standard protocols(N2, BACnet MS/TP, or LON). Supports BACnet/IP network.MS-NIE2910-09.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus, orKNX) and one N2 Bus. The number of supported devices on thethird-party trunk depends on the protocol. For the N2 Bus, upto 32 devices are supported.MS-NIE2916-09.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus, orKNX) and one N2 Bus. The number of supported devices on thethird-party trunk depends on the protocol. For the N2 Bus, upto 32 devices are supported. Includes integral display screen.MS-NIE2920-09.0 onlySupports two third-party trunks (Modbus RTU or TCP, M-Bus,or KNX), and one LonWorks trunk. The number of supporteddevices on the third-party trunk depends on the protocol. Forthe N2 Bus, up to 32 devices are supported. For the LonWorkstrunk, up to 32 devices are supported. This product does notsupport the 9.0.7 upgrade.MS-NIE2926-09.0 onlySupports two third-party trunks (Modbus RTU or TCP, MBus, or KNX), and one LonWorks network trunk. The numberof supported devices on the third-party trunk depends onthe protocol. For the LonWorks trunk, up to 32 devices aresupported. Includes integral display screen. This product doesnot support the 9.0.7 upgrade.MS-NIE2960-09.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus,or KNX) and one BACnet MS/TP (RS-485) trunk. The numberof supported devices on the third-party trunk depends on theprotocol. For the BACnet MS/TP trunk, up to 32 devices aresupported.MS-NIE2966-09.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus,or KNX) and one BACnet MS/TP (RS-485) trunk. The numberof supported devices on the third-party trunk depends on theprotocol. For the BACnet MS/TP trunk, up to 32 devices aresupported. Includes integral display screen.Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page5

Table 2: NIE39 Ordering Information (Release 9.0 or 9.0.7 Only)Product CodeNumberReleaseDescriptionMS-NIE39xx-x (BaseFeatures of EachNIE39)n/aEach NIE39 Series model requires a 24 VAC power supply.Each model includes two RS-232-C serial ports, one USB serialport, one RS-485 or LON port, one Ethernet port, and an MSBAT1020-0 Data Protection Battery. Up to two ports can bedefined for third-party integration. The other ports have to bedefined in order to use standard protocols (N2, BACnet MS/TP,or LON). Supports BACnet/IP network.MS-NIE3910-29.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus, orKNX) and one N2 Bus or one BACnet MS/TP (RS-485) trunk. Thenumber of supported devices on the third-party trunk dependson the protocol. For the N2 Bus or BACnet MS/TP trunk, up to50 devices are supported.MS-NIE3920-29.0 onlySupports two third-party trunks (Modbus RTU or TCP, M-Bus,or KNX) and one LonWorks trunk. The number of supporteddevices on the third-party trunk depends on the protocol.For the LonWorks trunk, up to 64 devices are supported. Thisproduct does not support the 9.0.7 upgrade.Table 3: Modbus Accessories Ordering InformationProduct Code NumberIU-9100-8401 (Europe)IU-9100-8404 (Europe)or BM485-CIP (North1DescriptionRS232-to-RS485 converter, 230 VACRS232-to-RS485 converter, 24 VAC1America)1European market: order this accessory in AOMS from the Essen Distribution Center. North American market: orderthis accessory from duTec (http://www.interfaceconverter.com or 1-800-248-1632), specify vendor #290904.Table 4: NIE49 Ordering Information (Release 9.0 or 9.0.7 Only)Product CodeNumberReleaseDescriptionMS-NIE49xx-x (Basefeatures of eachNIE49)n/aEach NIE49 Series model requires a 24 VAC power supply.Each model includes two RS-232-C serial ports, one USB serialport, one RS-485 or LON port, one Ethernet port, and an MSBAT1020-0 Data Protection Battery. Up to two ports can bedefined for third-party integration. The other ports have to bedefined in order to use standard protocols (N2, BACnet MS/TP,or LON). Supports BACnet/IP network.MS-NIE4910-29.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus, orKNX) and one N2 Bus or one BACnet MS/TP (RS-485) trunk. Thenumber of supported devices on the third-party trunk dependson the protocol. For the N2 Bus or BACnet MS/TP trunk, up to100 devices are supported.6Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page

Table 4: NIE49 Ordering Information (Release 9.0 or 9.0.7 Only)Product CodeNumberReleaseDescriptionMS-NIE4920-29.0 onlySupports two third-party trunks (Modbus RTU or TCP, M-Bus,or KNX) and one LonWorks trunk. The number of supporteddevices on the third-party trunk depends on the protocol. Forthe LonWORKS trunk, up to 127 devices are supported. Thisproduct does not support the 9.0.7 upgrade.Table 5: NIEx9 Accessories Ordering InformationProduct Code NumberDescriptionMS-BAT1010-0Replacement data protection battery for NAE55 and NIE59.Rechargeable gel cell battery: 12 V, 1.2 Ah, with a typical life of three tofive years at 21 C (70 F)MS-BAT1020-0Replacement data protection battery for NAE35, NIE39, NAE45, NIE45,NIE49, NCE25, or NIE29. Rechargeable NiMH 3.6 VDC, 500 mAh batterywith a typical life of five to seven years at 21 C (70 F). (Higher operatingtemperatures reduce battery life.)Table 6: Modbus Accessories Ordering InformationProduct Code NumberIU-9100-8401 (Europe)1IU-9100-8404 (Europe)or BM485-CIP (NorthDescriptionRS232-to-RS485 converter, 230 VACRS232-to-RS485 converter, 24 VAC1America)1European market: order this accessory in AOMS from the Essen Distribution Center. North American market: orderthis accessory from duTec (http://www.interfaceconverter.com or 1-800-248-1632), specify vendor #290904.Table 7: M-Bus Accessories Ordering InformationProduct Code Number1RS232-to-M-Bus level converter for up to 6 unit loads; 24 VAC/VDC1RS232-to-M-Bus level converter for up to 100 unit loads; 24 VAC/VDC1RS232-to-M-Bus level repeater for up to 100 unit loads; 24 0E1RS232-to-M-Bus level repeater for up to 100 unit loads; 230 VAC1IP-to-M-Bus level converter for up to 100 unit loads; 24 -0E1INT-DX-KAB011DescriptionIP-to-M-Bus level converter for up to 100 unit loads; 230 VACOptional connection cable SUB-D to RJ-12 for use with SIS-MBUSSCLL-0EEuropean market: order this accessory in AOMS from the Essen Distribution Center.Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page7

Table 8: KNX Accessories Ordering InformationProduct Code X IP interface module to connect KNX line through Ethernet to anNIEx9KNX IP router to connect KNX line through Ethernet to an NIEx9,including line or area coupler functionalityEuropean market: order this accessory in AOMS from the Essen Distribution Center.Table 9: VGE Tool TrainingProduct Code NumberDescriptionC-10077VGE Tool Software Training (North America)The VGE tool is required to generate custom Modbus mapping tablesfor the NIE.PTK-CONT-26VGE Tool Software Software Training (Europe and Asia)The VGE tool is required to generate custom Modbus mapping tablesfor the NIE.Technical Specifications - NIEx9 ModelsTable 10: NIE29Power RequirementDedicated nominal 24 VAC, Class 2 power supply (North America),SELV power supply (Europe), at 50/60 Hz (20 VAC minimum to 30 VACmaximum)Power Consumption25 VA maximum for NCE25 onlyThe 25 VA rating does not include any power supplied to devicesconnected at the NIE BOs. Binary output devices connected to andpowered by an NIE can require an additional 125 VA (maximum).Power Source 15 VDC power source terminals provide 100 mA total current; quantityof inputs: five, located in Universal IN terminals; for active (3-wire) inputdevicesAmbient OperatingConditions0 to 50 C (32 to 122 F); 10 to 90% RH, 30 C (86 F) maximum dew pointAmbient StorageConditions-40 to 70 C (-40 to 158 F); 5 to 95% RH, 30 C (86 F) maximum dew pointData Protection BatterySupports data protection on power failure. Rechargeable NiMH battery:3.6 VDC 500 mAh, with a typical life of 5 to 7 years at 21 C (70 F);Product Code Number: MS-BAT1020-0ProcessorsSupervisory Controller: 192 MHz Renesas SH4 7760 RISC processorField Controller: 20 MHz Renesas H8S2398 processorMemorySupervisory Controller: 128 MB flash nonvolatile memory foroperating system, configuration data, and operations data storage andbackup and 128 MB SDRAM for operations data dynamic memoryField Controller: 1 MB flash and 1 MB RAM8Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page

Table 10: NIE29Operating SystemMicrosoft Windows Embedded CE 6.0 (Release 9.0)Buildroot 2017.08.2 with Linux kernel 14.4 (Release 9.0.7 patch)Network and SerialInterfacesMS-NIE291x-0 (MS/TP) or MSNIE296x-0 (N2)Release 9.0.7:Analog Input/AnalogOutputResolution and AccuracyMS-NIE292x-0 (LON)Release 9.0 only, not 9.0.7: One Ethernet port: 10/100Mbps; 8-pin RJ-45 connector One optically isolated RS-485 FCBus port or N2 Bus port; with apluggable and keyed 4-position terminal block One optically isolated RS-485 SABus port; with a pluggable andkeyed 4-position terminal block One RS-232-C serial port:standard 9-pin sub-Dconnectors, that support allstandard baud rates One USB serial port: not usedfor engine at Release 9.0.7Analog Input Points: 16-bit resolutionOne Ethernet port: 10/100Mbps; 8-pin RJ-45 connectorOne optically isolated RS-485 SABus port; with a pluggable andkeyed 4-position terminal blockOne RS-232-C serial port:standard 9-pin sub-Dconnectors, that support allstandard baud ratesOne USB serial port: standardUSB connector to support anoptional, user-supplied externalmodemOne LonWorks port; FTT1078 Kbps; pluggable, keyed 3position terminal blockAnalog Output Points: 16-bit resolution and 200 mV accuracy on 0-10VDC applicationsDimensions (Height xWidth x Depth)155 x 270 x 64 mm (6.1 x 10.6 x 2.5 in.)HousingPlastic housingMinimum mounting space required: 250 x 370 x 110 mm (9.8 x 14.6 x4.3 in.)Plastic material: ABS and polycarbonateProtection: IP20 (IEC60529)MountingOn flat surface with screws on three mounting clips or a single 35 mmDIN railShipping Weight1.2 kg (2.7 lb)ComplianceUnited States: UL Listed, File E107041, CCN PAZX, UL 916, EnergyManagement Equipment, FCC Compliant to CFR47, Part 15, Subpart B,Class ACanada: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205,Signal Equipment, Industry Canada Compliant, ICES-003Europe CE Mark - Johnson Controls declares that this product isin compliance with the essential requirements and other relevantprovisions of the EMC Directive.Australia and New Zealand RCM Mark, Australia/NZ EmissionsCompliantBACnet International: BTL 135-2010 Listed B-BCNetwork Integration Engine (NIEx9) for Third-Party Integrations Catalog Page9

Table 11: NIE39 and NIE49Power RequirementDedicated nominal 24 VAC, Class 2 power supply (North America),SELV power supply (Europe), at 50/60 Hz (20 VAC minimum to 30 VACmaximum)Power Consumption25 VA maximumAmbient OperatingConditions0 to 50 C (32 to 122 F); 10–90% RH, 30 C (86 F) maximum dew pointAmbient StorageConditions-40 to 70 C (-40 to 158 F); 5–95% RH, 30 C (86 F) maximum dew pointData Protection BatterySupports data protection on power failure. Rechargeable NiMH battery:3.6 VDC 500 mAh, with a typical life of 5 to 7 years at 21 C (70 F);Product Code Number: MS-BAT1020-0Processor192 MHz Renesas SH4 7760 RISC processorMemory128 MB flash nonvolatile memory for operating system, configurationdata, and operations data storage and backup and 128 MB SDRAM foroperations data dynamic memoryOperating SystemMicrosoft Windows Embedded CE 6.0 (Release 9.0)Buildroot 2017.08.2 with Linux kernel 14.4 (Release 9.0.7 patch)Network and SerialInterfacesHousingMS-NIE3910-2/MS-NIE4910-2 (MS/ MS-NIE3920-2/MS-NIE4920-2TP and N2)(LON)Release 9.0.7:Release 9.0 only, not 9.0.7 One Ethernet port: 10/100Mbps; 8-pin RJ-45 connector One optically isolated RS-485port: 9,600, 19.2k, 38.4k, or76.8k baud; pluggable andkeyed 4 position terminal blocks Two RS-232-C serial ports:standard 9-pin sub-Dconnectors, that support allstandard baud rates One USB 2.0 serial port: notused for engine at Release 9.0.7 One Ethernet port: 10/100Mbps; 8-pin RJ-45 connector One optically isolated RS-485port: 9,600, 19.2k, 38.4k, or76.8k baud; pluggable andkeyed 4 position terminal blocks Two RS-232-C serial ports:standard 9-pin sub-Dconnectors, that support allstandard baud rates One USB 2.0 serial port:standard USB connectorssupport an optional, usersupplied external modem One LonWorks port; FTT1078 Kbps; pluggable, keyed 3position terminal blockPlastic housing material: ABS polycarbonateUL94-5VB Protection: IP20 (IEC 60529)MountingOn flat surface with screws on three mounting clips or a single 35 mmDIN railDimensions (Height xWidth x Depth)131 x 270 x 62 mm (5.2 x 10.6 x 2.5 in.)Shipping Weight1.2 kg (2.7 lb)10Minimum space for mounting NIE: 210 x 350 x 110 mm (8.3 x 13.8 x 4.3in.)Network Integration Engine (NIEx9) for Third-Party Integrations Catalog Page

Table 11: NIE39 and NIE49ComplianceUnited States: UL Listed, File E107041, CCN PAZX, UL 916, EnergyManagement Equipment; FCC Compliant to CFR47, Part 15, Subpart B,Class ACanada: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205,Signal Equipment; Industry Canada Compliant, ICES-003Europe: CE Mark – Johnson Controls declares that this product isin compliance with the essential requirements and other relevantprovisions of the EMC Directive.Australia and New Zealand: RCM Mark, Australia/NZ EmissionsCompliantBACnet International: BTL 135-2010 Listed B-BCNetwork Integration Engine (NIEx9) for Third-Party Integrations Catalog Page11

2018 Johnson Controls. All rights reserved. All specifications and other information shown were current as of documentrevision and are subject to change without notice.

MS-NIE2916- 9.0 » 9.0.7 Supports two third-party trunks (Modbus RTU or TCP, M-Bus, or KNX) and one N2 Bus. The number of supported devices on the third-party trunk depends on the protocol. For the N2 Bus, up to 32 devices are supported. Includes integral display screen. MS-NIE2920- 9.0 only Supports two third-party trunks (Modbus RTU or TCP .

Related Documents:

Bruksanvisning för bilstereo . Bruksanvisning for bilstereo . Instrukcja obsługi samochodowego odtwarzacza stereo . Operating Instructions for Car Stereo . 610-104 . SV . Bruksanvisning i original

1.Engine Oil SABA 13 1.Engine Oil 8000 14 1.Engine Oil 6000 15 1.Engine Oil 3000 16 1.Engine Oil Alvand 17 1.Engine Oil Motor Cycle Engine Oil M-150 18 1.Engine Oil M-100 19 1.Engine Oil Gas Engine Oil CNG-BUS 20 1.Engine Oil G.I.C.X.LA 21 1.Engine Oil G.I.C.X. 22 1.Engine Oil Diesel Engine Oil Power 23 1.Engine Oil Top Engine 24

10 tips och tricks för att lyckas med ert sap-projekt 20 SAPSANYTT 2/2015 De flesta projektledare känner säkert till Cobb’s paradox. Martin Cobb verkade som CIO för sekretariatet för Treasury Board of Canada 1995 då han ställde frågan

service i Norge och Finland drivs inom ramen för ett enskilt företag (NRK. 1 och Yleisradio), fin ns det i Sverige tre: Ett för tv (Sveriges Television , SVT ), ett för radio (Sveriges Radio , SR ) och ett för utbildnings program (Sveriges Utbildningsradio, UR, vilket till följd av sin begränsade storlek inte återfinns bland de 25 största

Hotell För hotell anges de tre klasserna A/B, C och D. Det betyder att den "normala" standarden C är acceptabel men att motiven för en högre standard är starka. Ljudklass C motsvarar de tidigare normkraven för hotell, ljudklass A/B motsvarar kraven för moderna hotell med hög standard och ljudklass D kan användas vid

LÄS NOGGRANT FÖLJANDE VILLKOR FÖR APPLE DEVELOPER PROGRAM LICENCE . Apple Developer Program License Agreement Syfte Du vill använda Apple-mjukvara (enligt definitionen nedan) för att utveckla en eller flera Applikationer (enligt definitionen nedan) för Apple-märkta produkter. . Applikationer som utvecklas för iOS-produkter, Apple .

The Aircraft Engine Design Project Fundamentals of Engine Cycles Ken Gould Spring 2009 Phil Weed 1. g GE Aviation Technical History GE Aircraft Engines U.S. jet engine U.S. turboprop engine Vibl tt iVariable stator engine Mach 2 fighter engine Mach 3 bomber engine High bypass engine

The Group met four times in Brussels to complete its work: on 12 December 2013, on 14/15 January 2014, on 13/14 March 2014 and on 24/25 April 2014. During the term of the Group Mr Pierre Collin was appointed as member of the cabinet of Mr Moscovici, Minister of Finance in France. He continued participating in