Qualification Test Record ( QTR ) NORSOK M-650 - Cogne

1m ago
2 Views
0 Downloads
1.94 MB
9 Pages
Last View : 11d ago
Last Download : n/a
Upload by : Olive Grimm
Transcription

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650QTR. No.:1Rev. No.: 1Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S31803 - UNS S32205NORSOK M-630, Ed. 6, MDS D47 rev. 5Products andmanufacturingprocess(es):Bars for machining of components without welding endsMachined round bars up to 101.6mm or black bars up to 105mm.Square bloom continuous casting Hot rolling Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1 and Gadda F2 furnacesOther information:All tests performed at in-house labs.Qualification expires:09/2024ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS01)Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Hot rolled, solutionannealed andmachined round barsTest record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)2019051811105 mm105 mm412Qualified weight(kg)AllQualification/Acceptance signaturesManufacturer:Prepared by/Date:cciE. BalducciPrododucoductt MaucManageTechnical ProductManagerSteeeell BaeeBarsrsStainless Steel2026/03/2020Checked by/Date:byA.MisulisululQualityInnovationalititityy & InInnonovanovativationtion DirectorDirDirecir26/03/20203/2020202020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S32760NORSOK M-630, Ed. 6, MDS D57 rev. 5Products andmanufacturingprocess(es):QTR. No.:2Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Red. MS05)Machined round bars up to 101.6mm or black bars up to 105mm.Square bloom continuous casting/ingot casting Hot rolling Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1 and Gadda F2 furnacesOther information:All tests performed at in-house labs.Qualification expires:09/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Hot rolled, solutionannealed andmachined round barsfrom CC bloom.Hot rolled, solutionannealed andmachined round barsfrom ingot.Test record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)2019051780105 mm105 mm422All2019051814105 mm105 mm415AllQualification/Acceptance signaturesManufacturer:Prepared by/Date:E. BalduccicciTechnical ProductManagerPrododucoductt MaucManageStainless SteelSteeeell BarseeBars26/03/202020Checked by/Date:A.MisulsullsuQualityDirectorityy & InnovationInnovaInvationvaon DDirirecirec26/03/20203/203/20202020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

!"!" # ( )*&' .' ,/#''!"' '10-&'()((./3 4 .04 56 #* #''6 114 '1 .21 47 / 00##10!"3',' '. ' 305 1. ' 305 1, "11:9 ; / .20.1 ,'3#11,.' 3'.,# 1 0./ . 1 &19 "93'8 0#&37,' '3' 5013' 50110./89'1111,-%##10 0%#,-011 4 56',' '"#" ,-''23"!%" # ! # !:9 #01'0 1 : 39 "94','3'2)8 ''.' 3 3%; .6 '# 72)8 ''' ,4' ,',3# 7' ',' 9#''19 */9HULWDVYHLHQ ¡YLN1RUZD\33' 6,' ''','/'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH 3'9

NORSOK standard M-650Edition 4, September 2011QTR. No.:4Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S31254NORSOK M-630, Ed. 6, MDS R17 rev. 5Products andmanufacturingprocess(es):Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS11)Machined round bars up to 101.6mm or black bars up to 105mm.Ingot casting Hot rolling Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1 and Gadda F2 furnacesOther information:All tests performed at in-house labs.Qualification expires:09/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Hot rolled, solutionannealed andmachined round barsTest record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)2019051955105 mm105 mm448AllQualification/Acceptance signaturesManufacturer:Prepared by/Date:Checked by/Date:E. BalducciProducuctt MaucMananagerTechnical ProductManagerSteeeell BaeeBarsrsStainless tionQualQualititityy & InalInnonovanovativationtion DirectorD26/026/03//03/203/2020202026/03/2020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S32750NORSOK M-630, Ed. 6, MDS D57 rev. 5Products andmanufacturingprocess(es):QTR. No.:5Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS10)Machined round bars up to 250mm or black bars up to 265mm.Ingot casting hot forging Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on ELTI2 furnaceOther information:All tests performed at in-house labs.Qualification expires:11/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Test record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)Hot forged, solutionannealed andmachined round tance signaturesManufacturer:Prepared by/Date:Checked by/Date:E. BalducciTechnical ProductManagerProducuctt MaucMananagerStainless SteelSteeeell vationQualQualityy & Innoalnovanovativationtion e manufactureQTR are evaluated and found to be in compliance with the requirements of NORSOK M-650 Edition 4 forsupply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S31254NORSOK M-630, Ed. 6, MDS R17 rev. 5Products andmanufacturingprocess(es):QTR. No.:6Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS13)Machined round bars up to 250mm or black bars up to 265mm.Ingot casting Hot forging Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on ELTI2 furnaceOther information:All tests performed at in-house labs.Qualification expires:11/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Hot rolled, solutionannealed andmachined round barsTest record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)2019065032265 mm265 mm2815AllQualification/Acceptance signaturesManufacturer:Prepared by/Date:Checked by/Date:E. BalducciProducuctt MaucMananagerTechnical ProductManagerSteeeell BaeeBarsrsStainless ualalititityy & Innoalnovanovativationtion DirectorDirDirec/03//03/203/2020202026/03/2020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S32760NORSOK M-630, Ed. 6, MDS D57 rev. 5Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS07)Products andmanufacturingprocess(es):QTR. No.:7Machined round bars up to 304.8mm or black bars up to 325mm.Ingot casting Hot forging Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1 and Gadda F2 furnacesOther information:All tests performed at in-house labs.Qualification expires:11/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Test record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)Hot forged, solutionannealed andmachined round barsfrom eptance signaturesManufacturer:Prepared by/Date:E. BalduccicciTechnical ProductManagerPrododucoductt MaucManageStainless SteelSteeeell BaeeBarsrs26/03/202020Checked by/Date:ulA.Misulityy & InInnovavativationon 020202026/03/2020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S31803 UNS S32205NORSOK M-630, Ed. 6, MDS D47 rev. 5Products andmanufacturingprocess(es):QTR. No.:8Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS03)Machined round bars up to 140mm or black bars up to 148mm.Continuous casting bloom Hot Rolling Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1, Gadda F2, SOTTRI3, ELTI2 furnacesOther information:All tests performed at in-house labs.Qualification expires:11/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Test record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)Hot forged, solutionannealed andmachined round barsfrom ptance signaturesManufacturer:Prepared by/Date:E. BalduccicciTechnical ProductManagerPrododucoductt MaucManageStainless SteelSteeeell BaeeBarsrs26/03/202020Checked by/Date:isulisulA.Misulalititityy & Innonovanovativationtion 020202026/03/2020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650Edition 4, September 2011Qualification Test Record ( QTR )NORSOK M-650Manufacturername/address/Web page:COGNE ACCIAI SPECIALI S.p.a.Via Paravera, 16 11100 AOSTAwww.cogne.comReference standardNORSOK M-650, Edition 4Material designationand MDS No.:Manufacturingsummary doc. No.:ASTM A479 - UNS S31803 UNS S32205NORSOK M-630, Ed. 6, MDS D47 rev. 5Products andmanufacturingprocess(es):QTR. No.:9Rev. No.: 1ItalyRev. No.0PQ x NORSOK Ed.11 (Ref. MS04)Machined round bars up to 355.6mm or black bars up to 386mm.Ingot casting Hot forging Solution AnnealingMandatory conditionsand sub-contractors:Heat treatment performed on Gadda F1, Gadda F2, SOTTRI3, ELTI2 furnacesOther information:All tests performed at in-house labs.Qualification expires:11/2024Tested and Qualified Thickness and WeightProducts andmanufacturingprocess(es):Test record No.Testedthickness(mm)Qualifiedthickness(mm)Test pieceweight(kg)Qualified weight(kg)Hot forged, solutionannealed andmachined round barsfrom ptance signaturesManufacturer:Prepared by/Date:E. BalduccicciTechnical ProductManagerPrododucoductt MaucManageStainless SteelSteeeell BaeeBarsrs26/03/202020Checked by/Date:.MisisulisA.Misulalititityy & Innoalnovanovativationtion 02026/03/2020The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of NORSOK M-650Edition 4 for supply of the above listed products and materials.This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is valid for hisproducts within the essential variables of NORSOK M-650 Edition 4.Qualified/Accepted by:'19 */9HULWDVYHLHQ ¡YLN1RUZD\Signature/Date:'LJLWDOO\ 6LJQHG %\ HOVHP 0RUWHQ 5R/RFDWLRQ '19 */ ¡YLN 1RUZD\6LJQLQJ 'DWH

NORSOK standard M-650 Edition 4, September 2011 Qualification Test Record ( QTR ) NORSOK M-650 QTR. No.:1 Rev. No.: 1 Manufacturer name/address/ Web page: COGNE ACCIAI SPECIALI S.p.a. Via Paravera, 16 11100 AOSTA Italy www.cogne.com Reference standard NORSOK M-650, Edition 4 Material designation and MDS No.: ASTM A479 - UNS S31803 - UNS S32205

Related Documents:

Y T D T ota l 5 M % Cha ng e 34% eR es ou rc e U s a g e 0M 1M Qtr 1 Qtr 2 Qtr 3 Qtr 4 Qtr 1 Qtr 2 Qtr 3 Qtr 4 2019 2020. K E Y P E R F O R M A N C E I N D I C ATO R S JANUARY TO DECEMBER 2020 vs 2019 YTD Total 451K Physical Circulation - Early Literacy The number of customer checkouts and

NORSOK C-002, Architectural components and equipment NORSOK M-501, Surface preparation and protective coating NORSOK N-001, Integrity of offshore structure NORSOK N-002, Collection of met ocean data NORSOK S-001, Technical safety NORSOK S-002, Working environment

WE requirements in NORSOK NORSOK C‐001 Living quarters area NORSOK C‐002 Architectural components and equipment NORSOK S‐002 Working Environment NORSOK S‐005 Machinery Safety Other disciplinary standards

Transfer of Personnel by Basket on the UK Continental Shelf NORSOK R-002 Lifting equipment (Edition 2, draft) NORSOK R-003 Safe of use lifting equipment (Rev. 2) NORSOK R-005 Safe of use lifting and transport equipment on onshore petroleum plants (Edition 1) NORSOK S-002 Working environment (Rev. 4) NORSOK Z-008 Critically Analysis for mainte-

Oct 15, 2018 · NORSOK M-001 Materials Section. Fifth Edition, September 2014. NORSOK M-501 Surface preparation and protective coating. Sixth Edition, February 2012. NORSOK R-001 Mechanical Equipment NORSOK R-001. Rev. 3, Nov. 1997. ANSI/API 12A Oil storage tanks with riveted shells. ANSI/API 14B Recommended practices. Design, Installation, Operation, Test .

NORSOK standard M-630 Edition 6, October 2013 NORSOK standard Page 3 of 155 1 Scope This NORSOK standard includes material requirement in a collection of MDS’ for use in piping systems, selected according to NORSOK L-001. The MDSs can also be applied for components other than piping, e.g. pressure vessels, pumps, strainer, etc.

The NORSOK standards are developed according to the consensus principle generally applicable for most standards work and according to established procedures defined in NORSOK A-001. The NORSOK standards are prepared and published with support by The Norwegian Oil Industry Association

Form 941 Lookback Period for Calendar Year 2019 2017 2018 July 1 Oct 1 Jan 1 Apr 1 to toto to Sep 30 Dec 31 Mar 31 Jun 30 ——— ——— ——— 3rd Qtr 4th Qtr 1st Qtr 2nd Qtr To determine your deposit schedule for Calendar Year 2019, you look back to this four quarter period. If the total taxes you reported in the Lookback Then you are .

2027760 NEW Lionel Lines StationSounds Diner MOUNT CLEMENS 6-7 254.99 339.99 3rd QTR 2022120 BTO Lionel 120th Deluxe LionChief Plus 2.0 F3 Set 8-9 899.99 999.99 4th QTR 2029010 NEW 85th Anniversary Gateman 8-9 82.49 109.99 3rd QTR 2029270 NEW Lionelville Freight Station 8-9 93.74 124.99 3rd QTR 203505

Refer to NORSOK Standard M-501 - A.2 NOTE 4. NORSOK M-501 Coating System Guide NIPPON PAINT 03 All products supplied and technical advice or recommendations given are subject to our standard Conditions of Sales. THERMALLY SPRAYED ALUMINIUM/ZINC AND ALLOYS OPERATING AT HIGH TEMPERATURE Pre-qualification Not Required NORSOK COATING SYSTEM 2

InErTa maSTIC mIOx 110 NORSOK M-501 rev. 5 TEknOdur aqua 3390-09 40 Total 320 1.3 TEknOzInC 3485 SE 60 report no. P9902304-203/08 Short InErTa maSTIC mIOx 110 SP, Sweden InErTa maSTIC mIOx 110 NORSOK M-501 rev. 5 TEknOCryl 2k 2540-05 40 Tested and certified as free from di-isocyanates. Total(IFkan no: 9252617) 320

Norsok standards are developed by the Norwegian petroleum industry. They are owned by . 11.3.2 Grounds for prioritisation – Norsok Z-001 . M-004 on piping and equipment insulation 45 11.5.14 Grounds for prioritisation: the D standard on well integrity in drilling

The NORSOK standards are developed by experts from the Norwegian petroleum industry and approved according to the consensus principles as laid down by the guidelines given in . NORSOK A -001 N:2016 directive. The NORSOK standards are owned by the Norwegian Oil and

sidered seawater resistant by NORSOK M-001 and ISO 21457 up to 20 C because of crevice corrosion concerns.13-14 The most common SDSS for subsea connection systems, piping, and tubing are UNS S32750, UNS S32550, and UNS S32760, which are all treated as equivalent13 in NORSOK M-001,4 NORSOK M-630,7 and ISO 21457.5 Table 1 sum-

Hardtop CA 60 160 60 280 LAB11-0835-REP NORSOK M-501 Edition 5 1-102 Sa 2,5 Barrier Penguard Express 150 Hardtop XP 75 60 285 LAB10-0821-REP NORSOK M-501 Edition 5 1-82 Sa 2,5 Barrier Jotamastic Plus 130 Hardtop Optima 75 75 3410-08-0043 Mt01 NORSOK M-501 Edition 5 Náterový system no.1 JOTUN Jcltun Protects Property

This NORSOK standard defines basic requirements for personnel, equipment and systems for MUOs within the petroleum industry. Main focus for this NORSOK standard is diving down to 180 msw. For diving deeper than 180 msw, special consideration, evaluations and mitigating actions, some of which are specified in this standard, are required.

5.D Qualification of water supplies 5.D.1 Introduction 5.D.2 Risk analysis 5.D.3 Design qualification 5.D.4 Installation qualification 5.D.5 Operational qualification (OQ) 5.D.6 Transfer to the user 5.D.7 Process validation/performance qualification (PQ) 5.D.8 Qualification report 5.E Operation of water supplies

An equipment qualification is handled in different phases of the equipment lifecycle, start-ing with design qualification, installation qualification, and then operational qualification and performance qualification. Every step in the equipment qualification formally comprises a plan, the execution and a report.

exempting qualification. B Structure of the qualification The structure of the qualification and syllabus subjects is shown on the following diagram. C Progression through the qualification Subjects within each learning pillar of the qualification are designed to be sequential, from operational to strategic level, encouraging

1 1 Novel engineered high performance sugar beetroot 2D nanoplatelet-cementitious 2 composites 3. 4. Hasan Hasan. 1, Bo Huang , Mohamed Saafi. 1 *, Jiawei Sun. 2, Yin .