Cisco 800 Series Routers Hardware Installation Guide
Cisco 800 Series RoutersHardware Installation GuideCorporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 526-4100Customer Order Number: DOC-785373 Text Part Number: 78-5373-04
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUTNOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUTARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FORTHEIR APPLICATION OF ANY PRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATIONPACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TOLOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a ClassA digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference whenthe equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installedand used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in aresidential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiateradio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and televisionreception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications inpart 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.However, there is no guarantee that interference will not occur in a particular installation.Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for ClassA or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correctany interference to radio or television communications at your own expense.You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Ciscoequipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference byusing one or more of the following measures: Turn the television or radio antenna until the interference stops. Move the equipment to one side or the other of the television or radio. Move the equipment farther away from the television or radio. Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the televisionor radio are on circuits controlled by different circuit breakers or fuses.)Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) aspart of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS AREPROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSEDOR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ANDNONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTALDAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE ORINABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCHDAMAGES.
CCSP, CCVP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work,Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP,CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, theCisco Systems logo, Cisco Unity, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare,GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys,MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, ProConnect, RateMUX,ScriptShare, SlideCast, SMARTnet, StrataView Plus, TeleRouter, The Fastest Way to Increase Your Internet Quotient, and TransPath are registeredtrademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply apartnership relationship between Cisco and any other company. (0502R)Cisco 800 Series Routers Hardware Installation GuideCopyright 2005 Cisco Systems, Inc. All rights reserved.
CONTENTSAbout This taining Documentation ixCisco.com ixDocumentation DVD ixOrdering Documentation ixDocumentation FeedbackxCisco Product Security Overview xReporting Security Problems in Cisco ProductsObtaining Technical Assistance xiCisco Technical Support Website xiSubmitting a Service Request xiiDefinitions of Service Request SeverityxiiObtaining Additional Publications and InformationCHAPTER1Overview1-2Router Ports SummaryCHAPTER2Front Panels1-3Back Panels1-41-31-7InstallationSafetyxii1-1Feature SummaryLEDsx2-12-2European Union Statements 2-2Network Termination Point StatementISDN S/T Ports Statement 2-3Preventing Electrostatic Discharge DamagePreventing Router DamageUnpacking Your RouterPreinstallation Activities2-32-32-42-42-4Cisco 800 Series Routers Hardware Installation Guide78-5373-04v
ContentsInstalling Your Router 2-5Connecting Ethernet Devices 2-6Connecting an ISDN Line 2-10Connecting an IDSL Line 2-13Connecting a Digital Telephone 2-14Connecting an Analog Telephone, Fax, or ModemConnecting a Terminal or PC 2-17Connecting the Power Supply 2-182-15Mounting Your Router 2-18Mounting on a Table 2-18Mounting on a Wall 2-19Verifying Installation2-20Where to Go from HereCHAPTERTroubleshooting32-223-1Problems During First StartupProblems After First Startup3-23-3Problems After Router Is Running3-5When Contacting Your Cisco ResellerAPPENDIXAISDN and IDSL ConceptsAPPENDIXBSpecifications and Cables3-7A-1B-1System SpecificationsB-1Port Connector PinoutsB-2Cabling Specifications B-6Ethernet Cable Specifications B-7Maximum Cable Distances B-7GLOSSARYINDEXCisco 800 Series Routers Hardware Installation Guidevi78-5373-04
About This GuideThis preface discusses the audience, organization, and conventions used in this guide.AudienceThis guide is intended for service technicians with all levels of experience in installing routers. The goalof all technicians is to connect the router to the network as quickly as possible. Where relevant, this guideexplains how the router is implemented and why. Conceptual information is usually in a separate sectionor appendix so that technicians who are not interested can skip this information.OrganizationThis guide contains the following information: About This Guide—Describes audience, organization, conventions used in this guide, and how toaccess related documentation. Overview—Contains router features and a description of router LEDs, ports, and other components. Installation—Provides information on safety, preventing damage, unpacking, and preparing forinstallation as well as installing, mounting, and verifying the connections to your router. Troubleshooting—Describes how to identify and solve problems with your router. ISDN and IDSL Concepts—Describes how ISDN is implemented on the router. Specifications and Cables—Provides router, port, and cable specifications. Glossary—Defines technical terms frequently used in this guide.ConventionsThis section describes the conventions used in this guide.NoteMeans reader take note. Notes contain helpful suggestions or references to additional information andmaterial.Cisco 800 Series Routers Hardware Installation Guide78-5373-04vii
About This GuideConventionsCautionThis symbol means reader be careful. In this situation, you might do something that could result inequipment damage or loss of data.WarningThis warning symbol means danger. You are in a situation that could causebodily injury. Before you work on any equipment, be aware of the hazardsinvolved with electrical circuitry and be familiar with the standard practicesfor preventing accidents.WaarschuwingDit waarschuwingssymbool betekent gevaar. U verkeert in een situatie dielichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaatwerken, dient u zich bewust te zijn van de bij elektrische schakelingenbetrokken risico's en dient u op de hoogte te zijn van standaard maatregelenom ongelukken te voorkomen.VaroitusTämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaaruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, otaselvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisistaonnettomuuksien ehkäisykeinoista.AttentionCe symbole d'avertissement indique un danger. Vous vous trouvez dans unesituation pouvant causer des blessures ou des dommages corporels. Avant detravailler sur un équipement, soyez conscient des dangers posés par lescircuits électriques et familiarisez-vous avec les procédures courammentutilisées pour éviter les accidents.WarnungDieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, diezu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit anirgendeinem Gerät beginnen, seien Sie sich der mit elektrischenStromkreisen verbundenen Gefahren und der Standardpraktiken zurVermeidung von Unfällen bewußt.AvvertenzaQuesto simbolo di avvertenza indica un pericolo. La situazione potrebbecausare infortuni alle persone. Prima di lavorare su qualsiasiapparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici edessere al corrente delle pratiche standard per la prevenzione di incidenti.AdvarselDette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føretil personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på defaremomentene som elektriske kretser innebærer, samt gjøre deg kjent medvanlig praksis når det gjelder å unngå ulykker.AvisoEste símbolo de aviso indica perigo. Encontra-se numa situação que lhepoderá causar danos físicos. Antes de começar a trabalhar com qualquerequipamento, familiarize-se com os perigos relacionados com circuitoseléctricos, e com quaisquer práticas comuns que possam prevenir possíveisacidentes.Cisco 800 Series Routers Hardware Installation Guideviii78-5373-04
About This GuideObtaining Documentation¡Atención!Varning!Este símbolo de aviso significa peligro. Existe riesgo para su integridadfísica. Antes de manipular cualquier equipo, considerar los riesgos queentraña la corriente eléctrica y familiarizarse con los procedimientosestándar de prevención de accidentes.Denna varningssymbol signalerar fara. Du befinner dig i en situation som kanleda till personskada. Innan du utför arbete på någon utrustning måste du varamedveten om farorna med elkretsar och känna till vanligt förfarande för attförebygga skador.Obtaining DocumentationCisco documentation and additional literature are available on Cisco.com. Cisco also provides severalways to obtain technical assistance and other technical resources. These sections explain how to obtaintechnical information from Cisco Systems.Cisco.comYou can access the most current Cisco documentation at this URL:http://www.cisco.com/univercd/home/home.htmYou can access the Cisco website at this URL:http://www.cisco.comYou can access international Cisco websites at this URL:http://www.cisco.com/public/countries languages.shtmlDocumentation DVDCisco documentation and additional literature are available in a Documentation DVD package, whichmay have shipped with your product. The Documentation DVD is updated regularly and may be morecurrent than printed documentation. The Documentation DVD package is available as a single unit.Registered Cisco.com users (Cisco direct customers) can order a Cisco Documentation DVD (productnumber DOC-DOCDVD ) from the Ordering tool or Cisco Marketplace.Cisco Ordering isco dering DocumentationYou can find instructions for ordering documentation at this URL:http://www.cisco.com/univercd/cc/td/doc/es inpck/pdi.htmCisco 800 Series Routers Hardware Installation Guide78-5373-04ix
About This GuideDocumentation FeedbackYou can order Cisco documentation in these ways: Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation fromthe Ordering tool:http://www.cisco.com/en/US/partner/ordering/ Nonregistered Cisco.com users can order documentation through a local account representative bycalling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere inNorth America, by calling 1 800 553-NETS (6387).Documentation FeedbackYou can send comments about technical documentation to bug-doc@cisco.com.You can submit comments by using the response card (if present) behind the front cover of yourdocument or by writing to the following address:Cisco SystemsAttn: Customer Document Ordering170 West Tasman DriveSan Jose, CA 95134-9883We appreciate your comments.Cisco Product Security OverviewCisco provides a free online Security Vulnerability Policy portal at this URL:http://www.cisco.com/en/US/products/products security vulnerability policy.htmlFrom this site, you can perform these tasks: Report security vulnerabilities in Cisco products. Obtain assistance with security incidents that involve Cisco products. Register to receive security information from Cisco.A current list of security advisories and notices for Cisco products is available at this URL:http://www.cisco.com/go/psirtIf you prefer to see advisories and notices as they are updated in real time, you can access a ProductSecurity Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL:http://www.cisco.com/en/US/products/products psirt rss feed.htmlReporting Security Problems in Cisco ProductsCisco is committed to delivering secure products. We test our products internally before we release them,and we strive to correct all vulnerabilities quickly. If you think that you might have identified avulnerability in a Cisco product, contact PSIRT: Emergencies — security-alert@cisco.com Nonemergencies — psirt@cisco.comCisco 800 Series Routers Hardware Installation Guidex78-5373-04
About This GuideObtaining Technical AssistanceTipWe encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitiveinformation that you send to Cisco. PSIRT can work from encrypted information that is compatible withPGP versions 2.x through 8.x.Never use a revoked or an expired encryption key. The correct public key to use in your correspondencewith PSIRT is the one that has the most recent creation date in this public key server list:http://pgp.mit.edu:11371/pks/lookup?search psirt%40cisco.com&op index&exact onIn an emergency, you can also reach PSIRT by telephone: 1 877 228-7302 1 408 525-6532Obtaining Technical AssistanceFor all customers, partners, resellers, and distributors who hold valid Cisco service contracts, CiscoTechnical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco TechnicalSupport Website on Cisco.com features extensive online support resources. In addition, Cisco TechnicalAssistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco servicecontract, contact your reseller.Cisco Technical Support WebsiteThe Cisco Technical Support Website provides online documents and tools for troubleshooting andresolving technical issues with Cisco products and technologies. The website is available 24 hours a day,365 days a year, at this URL:http://www.cisco.com/techsupportAccess to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password.If you have a valid service contract but do not have a user ID or password, you can register at this oNoteUse the Cisco Product Identification (CPI) tool to locate your product serial number before submittinga web or phone request for service. You can access the CPI tool from the Cisco Technical SupportWebsite by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco ProductIdentification Tool from the Alphabetical Index drop-down list, or click the Cisco ProductIdentification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product IDor model name; by tree view; or for certain products, by copying and pasting show command output.Search results show an illustration of your product with the serial number label location highlighted.Locate the serial number label on your product and record the information before placing a service call.Cisco 800 Series Routers Hardware Installation Guide78-5373-04xi
About This GuideObtaining Additional Publications and InformationSubmitting a Service RequestUsing the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3and S4 service requests are those in which your network is minimally impaired or for which you requireproduct information.) After you describe your situation, the TAC Service Request Tool providesrecommended solutions. If your issue is not resolved using the recommended resources, your servicerequest is assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this tFor S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone.(S1 or S2 service requests are those in which your production network is down or severely degraded.)Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your businessoperations running smoothly.To open a service request by telephone, use one of the following numbers:Asia-Pacific: 61 2 8446 7411 (Australia: 1 800 805 227)EMEA: 32 2 704 55 55USA: 1 800 553-2447For a complete list of Cisco TAC contacts, go to this itions of Service Request SeverityTo ensure that all service requests are reported in a standard format, Cisco has established severitydefinitions.Severity 1 (S1)—Your network is “down,” or there is a critical impact to your business operations. Youand Cisco will commit all necessary resources around the clock to resolve the situation.Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of yourbusiness operation are negatively affected by inadequate performance of Cisco products. You and Ciscowill commit full-time resources during normal business hours to resolve the situation.Severity 3 (S3)—Operational performance of your network is impaired, but most business operationsremain functional. You and Cisco will commit resources during normal business hours to restore serviceto satisfactory levels.Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, orconfiguration. There is little or no effect on your business operations.Obtaining Additional Publications and InformationInformation about Cisco products, technologies, and network solutions is available from various onlineand printed sources. Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. VisitCisco Marketplace, the company store, at this URL:http://www.cisco.com/go/marketplace/Cisco 800 Series Routers Hardware Installation Guidexii78-5373-04
About This GuideObtaining Additional Publications and Information Cisco Press publishes a wide range of general networking, training and certification titles. Both newand experienced users will benefit from these publications. For current Cisco Press titles and otherinformation, go to Cisco Press at this URL:http://www.ciscopress.com Packet magazine is the Cisco Systems technical user magazine for maximizing Internet andnetworking investments. Each quarter, Packet delivers coverage of the latest industry trends,technology breakthroughs, and Cisco products and solutions, as well as network deployment andtroubleshooting tips, configuration examples, customer case studies, certification and traininginformation, and links to scores of in-depth online resources. You can access Packet magazine atthis URL:http://www.cisco.com/packet iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companieslearn how they can use technology to increase revenue, streamline their business, and expandservices. The publication identifies the challenges facing these companies and the technologies tohelp solve them, using real-world case studies and business strategies to help readers make soundtechnology investment decisions. You can access iQ Magazine at this URL:http://www.cisco.com/go/iqmagazine Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineeringprofessionals involved in designing, developing, and operating public and private internets andintranets. You can access the Internet Protocol Journal at this URL:http://www.cisco.com/ipj World-class networking training is available from Cisco. You can view current offerings atthis Cisco 800 Series Routers Hardware Installation Guide78-5373-04xiii
About This GuideObtaining Additional Publications and InformationCisco 800 Series Routers Hardware Installation Guidexiv78-5373-04
C H A P T E R1OverviewThe Cisco 800 series routers connect small professional offices or telecommuters over IntegratedServices Digital Network (ISDN) Basic Rate Interface (BRI) lines to the Corporate LANs and theInternet. The routers offer bridging and multiprotocol routing capability between LAN and WAN ports.This chapter contains the following topics: Feature Summary Router Ports Summary Front Panels Back Panels LEDsCisco 800 Series Routers Hardware Installation Guide78-5373-041-1
Chapter 1OverviewFeature SummaryFeature SummaryTable 1-1 summarizes the features of the Cisco 800 series routers.Table 1-1Cisco 800 Series Feature SummaryFeatureRoutersDescription10BASE-T Ethernet port(s)AllProvides connection to 10BASE-T (10 Mbps)Ethernet networks. Compatible with10/100-Mbps devices.ISDN BRI S/T portCisco 801 and 803Provides connection to ISDN S/T network.ISDN BRI U portCisco 802 and 804Provides connection to ISDN U network.IDSL portCisco 802 IDSLand 804 IDSLProvides connection to IDSL network.Telephone portsCisco 803 and 804Provide connection to telephone, fax machine,or modem, which are connected to telephoneservices through ISDN line.Internal Network Termination 1(NT1)Cisco 802 and 804Eliminates need for an external NT1 in NorthAmerica.1Flash memoryAll8 MB of Flash memory.2Dynamic RAM (DRAM)All4 MB of DRAM.2Easily distinguishable ISDNB-channel LEDsAllISDN B-channel LEDs in a different colorfrom other LEDs.Ease of installationAllColor-coded ports and cables to reduce thechance of error.Cisco IOS softwareAllSupports Cisco IOS software.Cisco 800 Fast Step applicationAllProvides a Windows 95–, Windows 98–, andWindows NT–based software tool for basicconfigurations.Console portAllProvides connection to terminal or PC forsoftware configuration using command-lineinterface and for troubleshooting.NoteThe console port is a service port.Cable lockAllProvides a way to physically secure the router.Locking power connectorAllLocks power connector in place.Wall-mount featureAllBrackets on router bottom provide a way tomount router on wall or vertical surface.1. Although the ISDN U interfaces on the Cisco 802 and Cisco 804 routers provide internal NT1s, the routers themselves do notfunction as NT1s. You cannot connect S/T devices to Cisco 802 and Cisco 804 routers.2. An additional 8 MB of Flash memory and 4 or 8 MB of DRAM can be added at the factory or later. You can order upgradekits and have trained and qualified personnel add the memory. The Cisco product number for the 8-MB Flash memory upgradekit is MEM800-8F and the numbers for the DRAM upgrade kits are MEM800-4D and MEM800-8D.Cisco 800 Series Routers Hardware Installation Guide1-278-5373-04
Chapter 1OverviewRouter Ports SummaryRouter Ports SummaryTable 1-2 lists the Cisco 800 series routers and ports.Table 1-2Router PortsRouterEthernet PortsISDN PortsTelephone PortsCisco 801OneISDN BRI S/TNoneCisco 802OneISDN BRI UNoneCisco 802 IDSLOneIDSLNoneCisco 803FourISDN BRI S/TTwoCisco 804FourISDN BRI UTwoCisco 804 IDSLFourIDSLNoneFront PanelsThe figures in this section show the front panel of the Cisco 800 series routers.Cisco 801, Cisco 802, and Cisco 802 IDSL Front Panel11664Figure 1-1NT1 LED onCisco 802 and802 IDSL routers onlyCisco 803 and Cisco 804 Front Panel11665Figure 1-2NT1 LED onCisco 804 router onlyCisco 800 Series Routers Hardware Installation Guide78-5373-041-3
Chapter 1OverviewBack PanelsFigure 1-3Cisco 804 IDSL Front PanelETHERNE30770IDSLTIDSLBack PanelsThe figures in this section show the back panel of each of the Cisco 800 series routers.If the symbol of suitability ( ) appears above a port, you can connect the port directly to a publicnetwork that follows the European Union standards.WarningCisco 801 Router Back PanelLink LEDIndicates stateof Ethernetport. On whenconnected.Ethernet portConnect Ethernetnetwork device.HULINK NOBHUBETHERNETISDN BRI S/T portConnect to externalNT1 or ISDN wall jack.Cisco 801CONSOLE10 BASECable lockUse cablelock tophysicallysecurerouter.Power switchl On. Standby or no power output.ISDN S/TTHUB/NO HUB button(for Ethernet port)Console portDetermines cableConnect PC ortype for Ethernetterminal.device connection.11666Figure 1-4If the symbol of suitability with an overlaid cross ( ) appears above a port, you must not connect theport to a public network that follows the European Union standards. Connecting the port to this typeof public network can cause severe injury or damage your router.Locking powerconnectorConnect powersupply.Cisco 800 Series Routers Hardware Installation Guide1-478-5373-04
Chapter 1OverviewBack PanelsCisco 802 Router Back PanelEthernet portConnect Ethernetnetwork device.Link LEDIndicates stateof Ethernet port.HULINK NOBHUBETHERNFigure 1-6Power switchl On. Standby or no power output.Cisco 80ET2CONSOLE10 BASEISDN UTHUB/NO HUB button(for Ethernet port)Determines cabletype for Ethernetdevice connection.11667Cable lockUse cablelock tophysicallysecurerouter.ISDN BRI U portConnect toISDN wall jack.Console portConnect PCor terminal.Locking powerconnectorConnect powersupply.Cisco 803 Router Back PanelISDN BRI S/T portConnect to externalNT1 or ISDN wall jack.Ethernet portsConnect Ethernetnetwork devices.HUBNO HUETHERN3SE TCONSOLE0Cable lockUse cablelock tophysicallysecurerouter.1Power switchl On. Standby orno power output.Cisco 80ET 10 BABTelephone portsConnect to telephone,fax machine, or modem.ISDN S/TPHONE231HUB/NO HUB button(for Ethernet port 0)Determines cabletype for Ethernetdevice connection.Console portConnect PC orterminal.11668Figure 1-52Locking powerconnectorConnect powersupply.Cisco 800 Series Routers Hardware Installation Guide78-5373-041-5
Chapter 1OverviewBack PanelsFigure 1-7Cisco 804 Router Back PanelHUBNO HUETHERNPower switchl On. Standby or nopower output.Cisco 80ET 10 BABTelephone portsConnect to telephone,fax machine, ormodem.ISDN BRI U portConnect to ISDNwall jack.Ethernet portsConnect Ethernetnetwork devices.4SE TCONSOLEISDN UCable lockUse cablelock tophysicallysecurerouter.31HUB/NO HUB button(for Ethernet port 0)Determines cabletype for Ethernetdevice connection.Console portConnect PC orterminal.2Locking powerconnectorConnect powersupply.Cisco 802 IDSL Router Back PanelLink LEDIndicates stateof Ethernet port.Ethernet portConnect Ethernetnetwork device.TOLINK TO HUBPCIDSL portConnect toIDSL wall jack.ET10 BASEPower switchl On. Standby or no power output.Cisco 80ETHERNCONSOLECable lockUse cablelock tophysicallysecurerouter.PHONE22 IDSLIDSLTTO HUB/TO PC(for Ethernet port)Determines cabletype for Ethernetdevice connection.30771Figure 1-81116690Console portConnect PCor terminal.Locking powerconnectorConnect powersupply.Cisco 800 Series Routers Hardware Installation Guide1-678-5373-04
Chapter 1OverviewLEDsFigure 1-9Cisco 804 IDSL Router Back PanelTO HUBTO PCETHERNPower switchl On. Standby or nopower output.IDSL portConnect to IDSLwall jack.Ethernet portsConnect Ethernetnetwork devices.Cisco 80ET 10 BASE T4 IDSLCONSOLEIDSLCable lockUse cablelock tophysicallysecurerou
Contents vi Cisco 800 Series Routers Hardware Installation Guide 78-5373-04 Installing Your Router 2-5 Connecting Ethernet Devices 2-6 Connecting an ISDN Line 2-10 Connecting an IDSL Line 2-13 Connecting a Digital Telephone 2-14 Connecting an Analog Telephone, Fax, or Modem 2-15 Connecting a Terminal or PC 2-17 Connecting the Power Supply 2-18 Mounting Your Router 2-18
Cisco 2600 Series Routers Hardware Installation Guide OL-2171-06 1 Overview of Cisco 2600 Series Routers Cisco 2600 series routers are modular access routers with LAN and WAN connections that can be configured by means of interchangeable modules and WAN interface cards. This guide discusses the router models listed in Table 1-1 .File Size: 545KB
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide 78-16262-04 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide Contents Cisco One-Year Limited Hardware Warranty Terms, page 1-2 † Locate the Product Serial Number, page 1-3 † Before Installation, page 1-3
Cisco ASA 5505 Cisco ASA 5505SP Cisco ASA 5510 Cisco ASA 5510SP Cisco ASA 5520 Cisco ASA 5520 VPN Cisco ASA 5540 Cisco ASA 5540 VPN Premium Cisco ASA 5540 VPN Cisco ASA 5550 Cisco ASA 5580-20 Cisco ASA 5580-40 Cisco ASA 5585-X Cisco ASA w/ AIP-SSM Cisco ASA w/ CSC-SSM Cisco C7600 Ser
Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unified Computing System (Cisco UCS), Cisco UCS B-Series Blade Servers, Cisco UCS C-Series Rack Servers, Cisco UCS S-Series Storage Servers, Cisco UCS Manager, Cisco UCS
Cisco 2951 ISR, Cisco 3925 ISR, Cisco 3925E ISR, Cisco 3945 ISR, and Cisco 3945E ISR, running Cisco IOS Release 15.1.2.T3. 1.5 Physical Scope of the TOE The TOE is a hardware and software solution that makes up the following router models Cisco 881 ISR, Cisco 881G ISR, Cisco 891 ISR, Cisco 1905 ISR, Cisco 1921 ISR, Cisco
Cisco Nexus 1000V Cisco Nexus 1010 Cisco Nexus 4000 Cisco MDS 9100 Series Cisco Nexus 5000 Cisco Nexus 2000 Cisco Nexus 6000 Cisco MDS 9250i Multiservice Switch Cisco MDS 9700 Series Cisco Nexus 7000/7700 Cisco Nexus 3500 and 3000 CISCO NX-OS: From Hypervisor to Core CISCO DCNM: Single
Supported Devices - Cisco SiSi NetFlow supported Cisco devices Cisco Catalyst 3560 Cisco 800 Cisco 7200 Cisco Catalyst 3750 Cisco 1800 Cisco 7600 Cisco Catalyst 4500 Cisco 1900 Cisco 12000 Cisco Catalyst 6500 Cisco 2800 Cisco ASR se
Routers by now offering four platforms (Figure 1): the Cisco 3945E, Cisco 3925E, Cisco 3945, and Cisco 3925 Integrated Services Routers. The Cisco 3900 Series offers embedded hardware encryption acceleration, voice- and video-capable DSP slots, optional firewall, intrusion prevention, call processing, voicemail, and application services.
