3m Safety Data Sheet Scotchcast Brand Resin #4 (Part A & B)
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007Durango Electrical Services & NICE Electric (Section 1)Safety Data SheetCopyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properlyutilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement isobtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profitthereon.SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: SCOTCHCAST BRAND RESIN #4 (PART A & B)MANUFACTURER: 3MDIVISION: Electrical Markets DivisionADDRESS: 3M CenterSt. Paul, MN 55144-1000EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 07/23/2007Supercedes Date: 06/27/2006Document Group: 08-4935-6Product Use:Intended Use:Specific Use:INSULATING AND ENVIRONMENTAL SEALING OF POWER DISTRIBUTIONCABLE SPLICESELECTRICAL INSULATING RESINSECTION 2: INGREDIENTSIngredientC.A.S. No.% by WtPart A Components listed below are % of mixed resinEpoxy ResinPart B Components listed below are % of mixed resinNONYLPHENOLN-AMINOETHYLPIPERAZINEHEAVY NAPHTHENIC DISTILLATE SOLVENT PETROLEUM EXTRACTSFATTY ACIDS, TALL-OIL, REACTION PRODUCTS WITHTRIETHYLENETETRAMINETALL-OIL FATTY ACIDS, REACTION PRODUCTS WITH TETA ANDDGEBAamine/epoxy adductAROMATIC HYDROCARBONS, ETHYLENETETRAMINEDIETHYLENETRIAMINECARBON 11-668919-79-9Not Applicable50 - 60Not Applicable10 - 203- 73- 7 5Trade Secret 86-4 3 2 20.1 - 1 0.1 0.1Minute quantities of the substances listed below may be emitted during Normal Use:SubstanceConditionPage 1 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)Amine CompoundsHydrocarbonsIrritant Vapors or GasesToxic Vapor, Gas, Particulate07/23/2007Normal UseNormal UseNormal UseNormal Usetrade secret component above is on TSCA confidential InventorySECTION 3: HAZARDS IDENTIFICATION3.1 EMERGENCY OVERVIEWOdor, Color, Grade: A: CLEAR AMBER LIQUID B: BLACK LIQUID, AMINE ODORGeneral Physical Form: LiquidImmediate health, physical, and environmental hazards:May cause chemical eye burns. May cause allergic skin reaction.May cause chemical skin burns. May cause chemical gastrointestinal burns.Contains a chemical or chemicals which can causecancer. May cause target organ effects. Contains a chemical or chemicals which can cause birth defects or other reproductive harm.3.2 POTENTIAL HEALTH EFFECTSEye Contact:Corrosive (Eye Burns): Signs/symptoms may include cloudy appearance of the cornea, chemical burns, severe pain, tearing,ulcerations, significantly impaired vision or complete loss of vision.Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred orhazy vision.Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,pain, tearing, and blurred or hazy vision.Skin Contact:Corrosive (Skin Burns): Signs/symptoms may include localized redness, swelling, itching, intense pain, blistering, ulceration, andtissue destruction.Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.May be absorbed through skin and cause target organ effects.Inhalation:Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose andthroat pain.Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.May be absorbed following inhalation and cause target organ effects.Ingestion:Gastrointestinal Corrosion: Signs/symptoms may include severe mouth, throat and abdominal pain; nausea; vomiting; and diarrhea;blood in the feces and/or vomitus may also be seen.May be absorbed following ingestion and cause target organ effects.Target Organ Effects:Page 2 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination, nausea,slowed reaction time, slurred speech, giddiness, and unconsciousness.Contains a chemical or chemicals which can cause birth defects or other reproductive harm.Carcinogenicity:Contains a chemical or chemicals which can cause cancer.IngredientCARBON BLACKCARBON BLACK EXTRACTSC.A.S. No.1333-86-4NONEClass DescriptionGroup 2BGroup 2BRegulationInternational Agency for Research on CancerInternational Agency for Research on CancerSECTION 4: FIRST AID MEASURES4.1 FIRST AID PROCEDURESThe following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices arefollowed.Eye Contact: Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water for at least 15minutes. Get immediate medical attention. Wash contaminated clothing and clean shoes before reuse.Inhalation: Remove person to fresh air.If signs/symptoms develop, get medical attention.If Swallowed:Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconsciousperson. Get immediate medical attention.SECTION 5: FIRE FIGHTING MEASURES5.1 FLAMMABLE PROPERTIESAutoignition temperatureFlash PointFlammable Limits - LELFlammable Limits - UELOSHA Flammability Classification:No Data Available 230 ºF [Test Method: Closed Cup] [Details: MITS data]No Data AvailableNo Data AvailableClass IIIB Combustible Liquid5.2 EXTINGUISHING MEDIAOrdinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam). Use fire extinguisherswith class B extinguishing agents (e.g., dry chemical, carbon dioxide).5.3 PROTECTION OF FIRE FIGHTERSSpecial Fire Fighting Procedures: Water may be used to blanket the fire. Wear full protective equipment (Bunker Gear) and aself-contained breathing apparatus (SCBA).Unusual Fire and Explosion Hazards:Not applicable. No unusual fire or explosion hazards are anticipated.Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decompositionPage 3 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007information.SECTION 6: ACCIDENTAL RELEASE MEASURESAccidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for moreinformation on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should becleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanicalventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignitionsource and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drainsand build dikes to prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover withbentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry.Collect as much of the spilled material as possible. Clean up residue. Place in a closed container approved for transportation byappropriate authorities. Dispose of collected material as soon as possible.In the event of a release of this material, the user should determine if the release qualifies as reportable according tolocal, state, and federal regulations.SECTION 7: HANDLING AND STORAGE7.1 HANDLINGAvoid eye contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.Contents may be under pressure, open carefully. Avoid breathing of vapors, mists or spray. Avoid breathing of vapors created duringcure cycle. Wash hands after handling and before eating. Avoid skin contact with hot material. Avoid eye contact with vapors, mists,or spray. Keep out of the reach of children. Avoid breathing of dust created by cutting, sanding, grinding or machining. Forindustrial use only. Not intended for use as a medical device or drug. For industrial or professional use only. No smoking: Smokingwhile using this product can result in contamination of the tobacco and/or smoke and lead to the formation of the hazardousdecomposition products mentioned in the Reactivity Data section of this MSDS. Avoid contact with oxidizing agents.7.2 STORAGEStore away from acids. Keep container in well-ventilated area. Store away from areas where product may come into contact withfood or pharmaceuticals. Store away from oxidizing agents.SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 ENGINEERING CONTROLSProvide appropriate local exhaust ventilation on open containers. Provide ventilated enclosure for heat curing. Provide appropriatelocal exhaust for molten or extruded material. Provide appropriate local exhaust for cutting, grinding, sanding or machining. Curingenclosures must be exhausted to outdoors or to a suitable emission control device. Provide appropriate local exhaust when product isheated. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below OccupationalExposure Limits and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment.8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)8.2.1 Eye/Face ProtectionAvoid eye contact with vapors, mists, or spray.The following eye protection(s) are recommended: Full Face Shield, Indirect Vented Goggles.8.2.2 Skin ProtectionWear appropriate gloves, such as Nomex, when handling this material to prevent thermal burns. Avoid skin contact. Avoid skincontact with hot material.Page 4 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult withyour glove and/or protective clothing manufacturer for selection of appropriate compatible materials.Gloves made from the following material(s) are recommended: Neoprene. The following protective clothing material(s) arerecommended: Apron - Neoprene. Wear impervious protective clothing as necessary to prevent skin contact when handling.8.2.3 Respiratory ProtectionAvoid breathing of vapors, mists or spray. Avoid breathing of vapors created during cure cycle. Avoid breathing of dust created bycutting, sanding, grinding or machining.Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance withOSHA regulations: Fullface supplied-air respirator. Consult the current 3M Respiratory Selection Guide for additional informationor call 1-800-243-4630 for 3M technical assistance.8.2.4 Prevention of SwallowingDo not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.8.3 EXPOSURE GUIDELINESIngredientCARBON BLACKCARBON BLACKCARBON LAuthorityTypeLimitAdditional TWATWATWATWA3.5 mg/m30.5 mg/m33.5 mg/m31 ppm1 ppm1 ppm5 ppmTable A4Table Z-1Skin Notation*Skin Notation*; Table Z-1ASkin Notation** Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye,either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.SOURCE OF EXPOSURE LIMIT DATA:ACGIH: American Conference of Governmental Industrial HygienistsCMRG: Chemical Manufacturer Recommended GuidelineOSHA: Occupational Safety and Health AdministrationAIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)SECTION 9: PHYSICAL AND CHEMICAL PROPERTIESOdor, Color, Grade:General Physical Form:Autoignition temperatureFlash PointFlammable Limits - LELFlammable Limits - UELBoiling pointA: CLEAR AMBER LIQUID B: BLACK LIQUID, AMINE ODORLiquidNo Data Available 230 ºF [Test Method: Closed Cup] [Details: MITS data]No Data AvailableNo Data Available 200 ºFVapor DensityNo Data AvailableVapor Pressure 27 psia [@ 131.0000000000 ºF] [Details: MITS data]Specific GravitypH1.1 [Details: MITS data]Not ApplicablePage 5 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007Melting pointNo Data AvailableSolubility in WaterEvaporation rateVolatile Organic CompoundsPercent volatileVOC Less H2O & Exempt SolventsViscosityNegligibleNo Data AvailableNo Data Available3-5%No Data Available3500 - 5000 centipoise [@ 73.4000000000 ºF] [Details: MITS data]SECTION 10: STABILITY AND REACTIVITYStability: Stable.Materials and Conditions to Avoid: Strong acids; Strong bases; Strong oxidizing agents; None knownHazardous Polymerization: Hazardous polymerization will not occur.Hazardous Decomposition or By-ProductsSubstanceConditionAldehydesCarbon monoxideCarbon dioxideOxides of NitrogenToxic Vapor, Gas, ParticulateOxidative DegradationDuring CombustionDuring CombustionDuring CombustionDuring CombustionSECTION 11: TOXICOLOGICAL INFORMATIONPlease contact the address listed on the first page of the SDS for Toxicological Information on this material and/or itscomponents.SECTION 12: ECOLOGICAL INFORMATIONECOTOXICOLOGICAL INFORMATIONNot determined.CHEMICAL FATE INFORMATIONNot determined.SECTION 13: DISPOSAL CONSIDERATIONSWaste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposalalternative, dispose of waste product in a facility permitted to accept chemical waste.EPA Hazardous Waste Number (RCRA): Not regulatedSince regulations vary, consult applicable regulations or authorities before disposal.Page 6 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007SECTION 14:TRANSPORT INFORMATIONID Number(s):78-8111-0945-9, 78-8111-0947-5, 78-8111-0948-3, 78-8111-0949-1, 78-8111-0950-9, 78-8111-0951-7, 80-6109-7349-9, 806109-8166-6, 80-6109-8167-4, 80-6109-8168-2, 80-6109-8169-0, 80-6109-8170-8, 80-6109-8171-6, 80-6109-8241-7, 80-61098242-5, 80-6112-1861-3, 80-6112-1862-1, 80-6112-1863-9, 80-6112-1864-7, 80-6112-1866-2, 80-6112-1867-0, 80-6112-1868-8Please contact the emergency numbers listed on the first page of the SDS for Transportation Information for thismaterial.SECTION 15: REGULATORY INFORMATIONUS FEDERAL REGULATIONSContact 3M for more information.311/312 Hazard Categories:Fire Hazard - No Pressure Hazard - NoReactivity Hazard - NoImmediate Hazard - YesDelayed Hazard - YesThis material contains a chemical which requires export notification under TSCA Section 12[b]:Ingredient (Category if applicable)C.A.S. NoRegulationStatusDIETHYLENETRIAMINE111-40-0Toxic Substances Control Act (TSCA) 4 TestRule ChemicalsApplicableSTATE REGULATIONSContact 3M for more information.CALIFORNIA PROPOSITION 65IngredientC.A.S. No.ClassificationCARBON BLACKCARBON BLACK EXTRACTS1333-86-4NONE**Carcinogen**Carcinogen** WARNING: contains a chemical which can cause cancer.CHEMICAL INVENTORIESThe components of this product are in compliance with the chemical notification requirements of TSCA.All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),or are exempt polymers whose monomers are listed on EINECS.The components of this product are listed on the Australian Inventory of Chemical Substances.All the components of this product are listed on China's Inventory of Chemical Substances.The components of this product are listed on the Canadian Domestic Substances List.Page 7 of 8
3M SAFETY DATA SHEET SCOTCHCAST BRAND RESIN #4 (PART A & B)07/23/2007Contact 3M for more information.INTERNATIONAL REGULATIONSContact 3M for more information.This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.SECTION 16: OTHER INFORMATIONNFPA Hazard ClassificationHealth: 3 Flammability: 1Reactivity: 0 Special Hazards: NoneNational Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that arepresented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on theinherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known tobe generated in significant quantities.HMIS Hazard ClassificationHealth: 3 Flammability: 1Reactivity: 0Protection: BHazardous Material Identification System (HMIS ) hazard ratings are designed to inform employees of chemical hazards in the workplace. Theseratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergencysituations. HMIS ratings are to be used with a fully implemented HMIS program. HMIS is a registered mark of the National Paint and CoatingsAssociation (NPCA).Reason for Reissue: The SDS has been revised because 3M has adopted the 16-section ANSI/ISO format. The potential hazards ofthe product have not changed. We encourage you to reread the SDS and review the information.Revision Changes:Copyright was modified.Section 2: Ingredient table was modified.Section 15: California proposition 65 ingredient information was modified.Section 3: Carcinogenicity table was modified.Section 2: Ingredients comment was added.DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3MMAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OFTRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method ofuse or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquelywithin the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for aparticular purpose and suitable for user's method of use or application.3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer mayhave resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.In addition, information obtained from a database may not be as current as the information in the SDS available directly from 3M.3M MSDSs are available at www.3M.comPage 8 of 8
Scotchkote Electrical Coating FD07/08/14Durango Electrical Services & NICE Electric (Section 2)Safety Data SheetCopyright,2014,3M Company.All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products isallowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.Document Group:Issue Date:30-0188-007/08/14Version Number:Supercedes Date:3.0004/30/12SECTION 1: Identification1.1. Product identifierScotchkote Electrical Coating FDProduct Identification Numbers78-8141-5273-8, 80-6116-0413-51.2. Recommended use and restrictions on useRecommended useElectrical, Moisture proofing for wire connections.1.3. Supplier’s lectrical Markets Division3M Center, St. Paul, MN 55144-1000, USA1-888-3M HELPS (1-888-364-3577)1.4. Emergency telephone number1-800-364-3577 or (651) 737-6501 (24 hours)SECTION 2: Hazard identification2.1. Hazard classificationFlammable Liquid: Category 2.Serious Eye Damage/Irritation: Category 2A.Reproductive Toxicity: Category 2.Specific Target Organ Toxicity (central nervous system): Category 3.2.2. Label elementsSignal wordDangerSymbolsFlame Exclamation mark Health Hazard PictogramsPage 1 of 12
Scotchkote Electrical Coating FD07/08/14Hazard StatementsHighly flammable liquid and vapor.Causes serious eye irritation.May cause drowsiness or dizziness.Suspected of damaging fertility or the unborn child.Precautionary StatementsGeneral:Keep out of reach of children.Prevention:Obtain special instructions before use.Do not handle until all safety precautions have been read and understood.Keep away from heat/sparks/open flames/hot surfaces. - No smoking.Ground/bond container and receiving equipment.Use only non-sparking tools.Take precautionary measures against static discharge.Keep container tightly closed.Use explosion-proof electrical/ventilating/lighting equipment.Avoid breathing dust/fume/gas/mist/vapors/spray.Use only outdoors or in a well-ventilated area.Wear protective gloves and eye/face protection.Wash thoroughly after handling.Response:IF INHALED: Remove person to fresh air and keep comfortable for breathing.IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.If eye irritation persists: Get medical advice/attention.IF exposed or concerned: Get medical advice/attention.In case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide toextinguish.Storage:Store in a well-ventilated place. Keep cool.Keep container tightly closed.Store locked up.Disposal:Dispose of contents/container in accordance with applicable local/regional/national/international regulations.2.3. Hazards not otherwise classifiedNone.6% of the mixture consists of ingredients of unknown acute dermal toxicity.SECTION 3: Composition/information on ingredientsPage 2 of 12
Scotchkote Electrical Coating FD07/08/14IngredientAcetoneAcrylonitrile-Butadiene PolymerGlycerol Esters of Rosin AcidsPhenol-Formaldehyde PolymerSalicylic AcidZinc OxideC.A.S. 13-2% by Wt60 - 75 Trade Secret *10 - 205 - 105 - 101 - 3 Trade Secret *1- 2*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a tradesecret.SECTION 4: First aid measures4.1. Description of first aid measuresInhalation:Remove person to fresh air. If you feel unwell, get medical attention.Skin Contact:Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop,get medical attention.Eye Contact:Immediately flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. Get medicalattention.If Swallowed:Rinse mouth. If you feel unwell, get medical attention.4.2. Most important symptoms and effects, both acute and delayedSee Section 11.1. Information on toxicological effects.4.3. Indication of any immediate medical attention and special treatment requiredNot applicable.SECTION 5: Fire-fighting measures5.1. Suitable extinguishing mediaIn case of fire: Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.5.2. Special hazards arising from the substance or mixtureClosed containers exposed to heat from fire may build pressure and explode.Hazardous Decomposition or By-ProductsSubstanceHydrocarbonsCarbon monoxideCarbon dioxideOxides of NitrogenConditionDuring CombustionDuring CombustionDuring CombustionDuring Combustion5.3. Special protective actions for fire-fightersWater may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool andPage 3 of 12
Scotchkote Electrical Coating FD07/08/14prevent explosive rupture.SECTION 6: Accidental release measures6.1. Personal precautions, protective equipment and emergency proceduresEvacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools.Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and health hazards,respiratory protection, ventilation, and personal protective equipment.6.2. Environmental precautionsAvoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems orbodies of water.6.3. Methods and material for containment and cleaning upContain spill. Cover spill area with a fire-extinguishing foam. An appropriate aqueous film forming foam (AFFF) isrecommended. Working from around the edges of the spill inward, cover with bentonite, vermiculite, or commerciallyavailable inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbentmaterial does not remove a physical, health, or environmental hazard. Collect as much of the spilled material as possibleusing non-sparking tools. Place in a metal container approved for transportation by appropriate authorities. Clean up residuewith an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and followsafety precautions on the solvent label and SDS. Seal the container. Dispose of collected material as soon as possible.SECTION 7: Handling and storage7.1. Precautions for safe handlingKeep out of reach of children. Do not handle until all safety precautions have been read and understood. Keep away fromheat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Take precautionary measures againststatic discharge. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat,drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Avoid contactwith oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. Use personal protectiveequipment (gloves, respirators, etc.) as required. To minimize the risk of ignition, determine applicable electricalclassifications for the process using this product and select specific local exhaust ventilation equipment to avoid flammablevapor accumulation. Ground/bond container and receiving equipment if there is potential for static electricity accumulationduring transfer.7.2. Conditions for safe storage including any incompatibilitiesStore in a well-ventilated place. Keep cool. Keep container tightly closed. Protect from sunlight. Store away from heat.Store away from acids. Store away from oxidizing agents.SECTION 8: Exposure controls/personal protection8.1. Control parametersOccupational exposure limitsIngredientZinc OxideC.A.S. No.1314-13-2AgencyACGIHZinc Oxide1314-13-2OSHAAcetone67-64-1ACGIHLimit typeAdditional CommentsTWA(respirable fraction):2mg/m3;STEL(respirablefraction):10 mg/m3TWA(as fume):5mg/m3;TWA(as total dust):15mg/m3;TWA(respirablefraction):5 mg/m3TWA:500 ppm;STEL:750 ppm A4: Not class. as humanPage 4 of 12
Scotchkote Electrical Coating FD07/08/14carcinAcetone67-64-1OSHATWA:2400 mg/m3(1000 ppm)ACGIH : American Conference of Governmental Industrial HygienistsAIHA : American Industrial Hygiene AssociationCMRG : Chemical Manufacturer's Recommended GuidelinesOSHA : United States Department of Labor - Occupational Safety and Health AdministrationTWA: Time-Weighted-AverageSTEL: Short Term Exposure LimitCEIL: Ceiling8.2. Exposure controls8.2.1. Engineering controlsProvide appropriate local exhaust ventilation on open containers. Use general dilution ventilation and/or local exhaustventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray.If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment.8.2.2. Personal protective equipment (PPE)Eye/face protectionSelect and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/faceprotection(s) are recommended:Indirect Vented GogglesSkin/hand protectionSelect and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on theresults of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of thesubstance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protectiveclothing.Gloves made from the following material(s) are recommended: Butyl RubberRespiratory protectionAn exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part ofa full respiratory protection program. Based on the results of the exposure assessment, select from the following respiratortype(s) to reduce inhalation exposure:Half facepiece or full facepiece air-purifying respirator suitable for organic vaporsFor questions about suitability for a specific application, consult with your respirator manufacturer.SECTION 9: Physical and chemical properties9.1. Information on basic physical and chemical propertiesLiquidGeneral Physical Form:ViscousSpecific Physical Form:Dark brown liquid; sharp solvent odor.Odor, Color, Grade:No Data AvailableOdor thresholdNot ApplicablepHNot ApplicableMelting point 56 ºC [Details: Acetone]Boiling Point-4 ºF [Test Method: Closed Cup]Flash Point1.9 [Ref Std: ET
OSHA regulations: Fullface supplied-air respirator. Consult the current 3M Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance. 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.3 EXPOSURE GUIDELINES
Sheet 5 Sheet 6 Sheet 7 Sheet 8 Sheet 9 Sheet 10 Sheet 11 Sheet 12 Sheet 13 Sheet 2 Sheet 1 Sheet 3 Basic Information About Notes Lines and Spaces Trace Notes Stems Note Properties Writing Music Find the Way Home Crossword Puzzle Counting Notes Notes and Beats in 4/4 time Double Puzzle N
PLASKOLITE, INC. PRODUCTS: Acrylic Sheet Impact Modified Acrylic Sheet Copolyester Sheet Roll Stock Acrylic Sheet Colored Acrylic Sheet Patterned Sheet High Performance Coatings Thin & Thick Gauge Acrylic Sheet Frosted Acrylic Sheet Acrylic Sheet with Matte Finish Polystyrene Sheet Acrylic Mirror Sheet Acrylic
s.no. document/ drawing no. rev. no. pages page no. ii volume ii of ii 1 mr p.013751 d11071 101 1 12 1 2 data sheet p.013751 d 11087 006 0 2 13 3 data sheet p.013751 d 11087 007 0 2 15 4 data sheet p.013751 d 11087 008 1 2 17 5 data sheet p.013751 d 11087 009 1 2 19 6 data sheet p.013751 d 11087 013 0 2 21 7 data sheet p.013751 d 11087 014 0 2 23 8 data sheet p.013751 d 11087 010 1 2 25
The Create Sheet from Symbol command is for top-down design. Once the top sheet is fully defined, this command creates the sub-sheet for the chosen sheet symbol and places matching ports on it. The Create Symbol from Sheet command is for bottom-up design, creating a sheet symbol with sheet entries based on the chosen sub-sheet. This is the mode .
Cissp cheat sheet all domains. Cissp cheat sheet 2022 pdf. Cissp cheat sheet 2022. Cissp cheat sheet domain 4. Cissp cheat sheet pdf. Cissp cheat sheet 2021. Cissp cheat sheet domain 1. Cissp cheat sheet reddit. We use cookies to offer you a better browsing experience, analyze site traffic, personalize content, and serve targeted advertisements.
SAFETY DATA SHEET (according to Regulation (EC) No. 1907/2006 ) PLEDGE Aerosol - Multi-Surface Classic Version 1.1 Print Date 01.10.2014 : : SAFETY DATA SHEET PLEDGE Aerosol - Multi-Surface Classic 1. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its .
Safety Data Sheet Cover-Sheet – This page provides additional New Zealand specific information for this product, and must be read in conjunction with the Safety Data Sheet (SDS) attached. Product Name: G-CEM Capsules Manufacturer: GC
A local apparatus according to ASTM C167-82 was prepared to measure the thickness for loose materials to calculate the density of materials like rock wool. A new sonic viewer device was used to measure the average times of compressional and shear waves(Tp,Ts) respectively which are transit through the composites to calculate their velocities (Vp,Vs) in order to calculate the dynamic elastic .
