DVI Full HD LCD Console CL6700MW User Manual - ATEN

1y ago
157 Views
2 Downloads
2.93 MB
50 Pages
Last View : 11d ago
Last Download : 1m ago
Upload by : Kelvin Chao
Transcription

DVI Full HD LCD ConsoleCL6700MWUser Manualwww.aten.com

CL6700MW User ManualEMC InformationFEDERAL COMMUNICATIONS COMMISSION INTERFERENCESTATEMENT: This equipment has been tested and found to comply with thelimits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference when the equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipment ina residential area is likely to cause harmful interference in which case the userwill be required to correct the interference at his own expense.The device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by theparty responsible for compliance could void the user's authority to operate thisequipment.Warning: Operation of this equipment in a residential environment couldcause radio interference.Achtung: Der Gebrauch dieses Geräts in Wohnumgebung kannFunkstörungen verursachen.KCC StatementRoHSThis product is RoHS compliant. Copyright 2021 ATEN International Co., Ltd.Manual Date: 2021-01-05ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved.All other brand names and trademarks are the registered property of their respective owners. Theterms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks orregistered trademarks of HDMI Licensing Administrator, Inc.ii

CL6700MW User 被要求採取某些適當的對策。KVM me單滑軌 LCD 控制端型號 ( 型式 )CL6700MWType designation (Type)限用物質及其化學符號Restricted substances and its chemical symbols單元 Unit鉛 Lead(Pb)電纜線 Cable印刷電路部件PCBA塑膠 / 其他部件Plastic / Otherparts螢幕 Panel鍵盤 Keyboard滑鼠 Mouse汞鎘Mercury Cadmium(Cd)(Hg)六價鉻Hexavalentchromium(Cr 6 )多溴聯苯多溴二苯醚Polybrominated Polybrominatedbiphenylsdiphenyl ethers(PBDE)(PBB)-- --- 備考 〝超出〞及 �出百分比含量基準值。:備考 〝 �出百分比含量基準值。: 備考 �:1.0.1 wt %0.01 wt %Note 1 “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restrictedsubstance exceeds the reference percentage value of presence condition.2.Note 2 “” indicates that the percentage content of the restricted substance does not exceed the percentage ofreference value of presence.3.Note 3 “ ” indicates that the restricted substance corresponds to the ��北市汐止區大同路二段 125 � : 40ºC最大額定電壓 : 100 - 240V ACiii

CL6700MW User ManualUser InformationOnline RegistrationBe sure to register your product at our online support one SupportFor telephone support, call this -0-810Japan81-3-5615-5811Korea82-2-467-6789North America1-888-999-ATEN ext 49881-949-428-1111iv

CL6700MW User ManualUser NoticeAll information, documentation, and specifications contained in this manualare subject to change without prior notification by the manufacturer. Themanufacturer makes no representations or warranties, either expressed orimplied, with respect to the contents hereof and specifically disclaims anywarranties as to merchantability or fitness for any particular purpose. Any ofthe manufacturer's software described in this manual is sold or licensed as is.Should the programs prove defective following their purchase, the buyer (andnot the manufacturer, its distributor, or its dealer), assumes the entire cost of allnecessary servicing, repair and any incidental or consequential damagesresulting from any defect in the software.The manufacturer of this system is not responsible for any radio and/or TVinterference caused by unauthorized modifications to this device. It is theresponsibility of the user to correct such interference.The manufacturer is not responsible for any damage incurred in the operationof this system if the correct operational voltage setting was not selected priorto operation. PLEASE VERIFY THAT THE VOLTAGE SETTING ISCORRECT BEFORE USE.A typical LCD (Liquid Crystal Display) monitor has millions of pixels. A deadpixel refers to a pixel with a defect in its ability to display the correct coloroutput. It most often looks like a tiny black or white spot on your screen,although it can be any other color. Since even a tiny dust particle on one of thepixels during the manufacturing process or a slight bump during shipping cancreate a dead pixel, the ISO 13406-2 norm defines 4 classes of acceptablescreens with dead pixels--Class 1 is the best; Class 4 is the worst. Almost allmanufacturers use Class 2 to establish their warranties, which allows a certainamount of dead pixels to exist before they will replace the screen. Since themanufacturers consider these screens to be acceptable under ISOspecifications, we cannot be responsible for replacement or warranty of theTFT LCD panel.v

CL6700MW User ManualPackage ContentsBasic PackageThe basic CL6700MW package consists of:1 CL6700MW DVI Full HD LCD Console with Standard Rack Mount Kit1 Custom USB DVI KVM Cable Set1 Power Cord1 Firmware Upgrade Cable1 User Instructions*Check to make sure that all of the components are present and in good order.If anything is missing, or was damaged in shipping, contact your dealer.Read this manual thoroughly and follow the installation and operationprocedures carefully to prevent any damage to the console or to any otherdevices on the CL6700MW installation.* Changes may have been made to the manual since it was published. Pleasevisit our web site to download the most up-to-date version of the manualvi

CL6700MW User ManualContentsEMC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiRoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiUser Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ivOnline Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ivTelephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ivUser Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vPackage Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viBasic Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viAbout this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixOverview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ixConventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xProduct Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xChapter 1.IntroductionOverview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3LCD Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3External Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Chapter 2.Hardware SetupBefore you Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Standard Rack Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Optional Rack Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Connecting Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Chapter 3.OperationOpening the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Closing the Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17LCD OSD Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18LCD Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Manufacturing Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Adjustment Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Hot Plugging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Powering Off and Restarting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21vii

CL6700MW User ManualChapter 4.Firmware UpgradeThe Firmware Upgrade Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Firmware Upgrade Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Performing the Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Starting the Upgrade: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Upgrade Succeeded:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Upgrade Failed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Exiting Firmware Upgrade Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29AppendixSafety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Sun Keyboard Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Mac Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40viii

CL6700MW User ManualAbout this ManualThis User Manual is provided to help you get the most from your CL6700MWsystem. It covers all aspects of installation, configuration and operation. Anoverview of the information found in the manual is provided below.OverviewChapter 1, Introduction, introduces you to the CL6700MW KVMConsole. Its purpose, features and benefits are presented, and its componentsare described.Chapter 2, Hardware Setup, provides step-by-step instructions for settingup your installation, and explains some basic operation procedures.Chapter 3, Operation, describes the fundamental concepts involved inoperating the CL6700MW.Chapter 4, Firmware Upgrade, explains how to upgrade theCL6700MW’s firmware with the latest available versions.An Appendix, provides specifications and other technical informationregarding the CL6700MW.ix

CL6700MW User ManualConventionsThis manual uses the following conventions:MonospacedIndicates text that you should key in.[]Indicates keys you should press. For example, [Enter] means topress the Enter key. If keys need to be chorded, they appeartogether in the same bracket with a plus sign between them:[Ctrl Alt].1.Numbered lists represent procedures with sequential steps. Bullet lists provide information, but do not involve sequentialsteps. Indicates selecting the option (on a menu or dialog box, forexample), that comes next. For example, Start Run meansto open the Start menu, and then select Run.Indicates critical information.Product InformationFor information about all ATEN products and how they can help you connectwithout limits, visit ATEN on the Web or contact an ATEN AuthorizedReseller. Visit ATEN on the Web for a list of locations and telephone numbers:Internationalhttp://www.aten.comNorth Americahttp://www.aten-usa.comx

Chapter 1IntroductionOverviewThe CL6700MW DVI Full HD LCD Console is a single rail KVM consolefeaturing a 17.3" HD widescreen with integrated keyboard and touchpad in a1U rack-mountable sliding housing. The CL6700MW provides front endaccess to compatible KVM switches and utilizes space by closing flat andsliding into the rack. In addition, ports for an external USB keyboard andmouse as well as a monitor are provided on the rear panel.The CL6700MW features DVI, HDMI, and VGA ports for the KVM switchand external console’s video connection. This added convenience providesthree video options for both the external console and KVM switch connection.The CL6700MW also includes two mini stereo ports for connecting audiospeakers.Server rooms already installed with compatible KVM switches will have theadvantage of easy LCD access, an additional KVM console, and a built-inspace saving sliding module, without having to purchase a new KVM switch.The CL6700MW’s firmware is upgradable, so you can stay current with thelatest updates by downloading them from the ATEN website. Setup is fast andeasy. Simply use the custom cables included with your device to connect theCL6700MW to the console ports of your KVM switch and you are ready to go!1

CL6700MW User ManualFeatures Integrated KVM console with a 17.3” Widescreen DVI Full HD LCDmonitor Single rail housing with top and bottom clearance for smooth operation ina 1U high system rack Supports an external console with DVI / VGA / HDMI video ports Superior video quality – up to 1920 x 1080 @60Hz; DDC, DDC2,DDC2B Optional rack mount kits available, including easy installation options Compatible with most ATEN DVI KVM Switches Adjustable depth to fit within the rack Audio support for connecting speakers Standard 105-key keyboard; Sun keyboard emulation Multiplatform support – Windows, Linux, Mac, and Sun Firmware upgradeable Console lock – enables the console drawer to remain securely locked awayin position when not in use DDC emulation – video settings of attached computers are automaticallyadjusted for optimal output to the monitor2

Chapter 1. IntroductionRequirementsLCD Console The LCD console supports most ATEN DVI KVM switches. If you areunsure whether your switch is supported or not, check with your dealer. The integrated LCD monitor's maximum resolution is 1920 x 1080@60Hz. Make sure that none of the resolution settings of the connectedcomputers exceed the LCD monitor's maximum resolution.External Console A VGA, SVGA, MultiSync, DVI, or HDMI monitor capable of displayingthe highest resolution provided by any computer in the installation USB keyboard and mouseCablesFor optimum signal integrity and to simplify the layout, we stronglyrecommend that you use high quality custom cable sets available in varyinglengths, described in the table below, which can be purchased from your dealer.Length (m)Part D02UH3

CL6700MW User ManualOperating SystemsSupported operating systems are shown in the table below.OSWindowsLinuxUNIXNovellVersionNT or laterRedHat9.0 or laterSuSE10 or laterMandriva (Mandrake)9.0 or laterAIX4.3 or laterFreeBSD5.5 or laterSunSolaris 8 or laterNetware5.0 or laterMac9.0 or laterDOS6.2 or later4

Chapter 1. IntroductionComponentsFront View212346513714118129105

CL6700MW User ManualNo.6ComponentDescription1Upper HandlePull to slide the LCD module out; push to slide it in.See Opening the Console, page 15, for details on sliding theconsole in and out2Module ReleaseCatchesIn order to slide the console out, you must first release it bysliding these catches to the inside.3LCD ModuleAfter sliding the LCD module out, flip up the cover to accessthe LCD display.4LCD ControlsThe buttons to control the position and picture settings of theLCD display are located here. See page 18, for details.5LCD On / OffButtonPush this button to turn the LCD monitor on and off. Thebutton lights when the LCD monitor is off.Note: The light indicates that only the monitor is off, not theattached KVM switch.6Keyboard ModuleStandard 105-key keyboard7TouchpadStandard mouse touchpad8USB PortThe USB port is available to connect a USB peripheraldevice (flash drive, CD-ROM drive, etc.) to the console, or aUSB mouse for users who prefer to use an external mouse.9Power LEDLights (green) to indicate that the unit is receiving power.10Rack MountingBracketsRack mounting brackets are located at each corner of theunit. See Standard Rack Mounting, page 9, for details.11Lock LEDsThe Num Lock, Caps Lock, Scroll Lock LEDs are locatedhere.12Reset SwitchLocated to the right of the Lock LEDs. Press this recessedswitch in with a thin object to perform a system reset.13FirmwareUpgrade PortThe firmware upgrade cable that transfers the firmwareupgrade data from the administrator’s computer plugs intothis RJ-11 connector.14FirmwareUpgrade SwitchDuring normal operation and while performing a firmwareupgrade, this switch should be in the NORMAL position. If afirmware upgrade operation does not complete successfully,this switch is used to perform a firmware upgrade recovery.See Upgrade Failed:, page 28, for details.

Chapter 1. IntroductionRear View1243HDMIHDMI5No.ComponentDescription1Power SocketThis is a standard 3 prong AC power socket. The power cordfrom an AC source plugs in here.2Power SwitchThis is a standard rocker switch that powers the CL6700MWon and off.3ExternalConsole SectionFor flexibility and convenience, the CL6700MW supports anindependent, external, KVM console. The external console'sUSB keyboard and mouse, DVI, VGA, or HDMI monitor, andaudio cables plug in here.4KVM PortSectionThe custom KVM cable supplied with the package for linkingthe CL6700MW to a computer or switch plugs in here. Anadditional HDMI and VGA port are provided.5GroundingTerminalThe grounding wire (used to ground the unit) attaches here.7

CL6700MW User ManualThis Page Intentionally Left Blank8

Chapter 2Hardware SetupBefore you Begin1. Important safety information regarding the placement of this device isprovided on page 31. Please review it before proceeding.2. Make sure that power to all the devices you will be connecting up hasbeen turned off. You must unplug the power cords of any computersthat have the Keyboard Power On function.Standard Rack MountingA standard rack mounting kit can be purchased separately for yourCL6700MW. The kit enables the CL6700MW to be mounted in rack with adepth of 52–85 cm.Left & Right L-shaped BracketsSide MountngBracketsNote: It takes two people to mount the console. The standard rack mounting kit does not include screws or cagenuts. If you need additional screws or cage nuts, contact your rackdealer.9

CL6700MW User ManualTo rack mount the CL6700MW, do the following:1. Have one person position the unit in the rack and hold it steady. Have thesecond person screw the front brackets to the rack.2. While the first person still holds the unit in place, the second person slidesthe left & right L-shaped brackets into the unit’s side mounting bracketsfrom the rear, installing four screws in the brackets to secure them in place.3. After the L-shaped brackets are secured, tighten all the screws.Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7cm at the back for the power cord and cable clearance.10

Chapter 2. Hardware SetupOptional Rack Mount KitsFor convenience and flexibility, optional rack mount kits are available and arelisted in the table below:Mounting KitDescriptionStandard Long Rack MountKitThis kit is the long-railed version of your standardmounting kit that lets you fit your device to racks withgreater depth.Easy Installation RackMount KitThis kit is designed to be easy to install and can beinstalled by one personNote: For more information, visit the product webpage and refer to theCompatible Accessories. For detailed installation steps, visit the product webpage and referto the Optional Rack Mount Kits Installation Guide.11

CL6700MW User ManualConnecting UpRefer to the example installation diagram as you perform the following steps:1. Plug the USB; then DVI, VGA, or HDMI, and audio connectors of a KVMcable (either supplied with the unit, or purchased separately, see Cables,page 3) into the KVM ports located in the CPU section on the rear of theCL6700MW.Note: The CL6700MW supports speakers only. It does not support amicrophone. Connect the KVM cable’s speaker jack (green) to theCL6700MW’s audio port.2. Plug the keyboard, monitor, mouse and audio connectors of the KVMcable into their respective ports in the Console Section of a KVM switchor computer.3. If you are installing an external console, plug your keyboard, monitor,mouse and speakers into their respective ports in the Console Section ofthe CL6700MW.Note: The CL6700MW supports a DVI, VGA or HDMI external consolemonitor, but only one video signal (DVI-D, VGA, or HDMI) can bedisplayed at a time. The DVI monitor will display a DVI-D signalonly.4. Plug the CL6700MW’s power cord into the CL6700MW's power socketand into a power source.5. Power up your KVM installation.6. Turn on the power to LCD Console.12

Chapter 2. Hardware SetupInstallation DiagramDVI-D, VGA, or HDMI43CL6700MW Rear ViewHDMIHDMI61DVI-D25CS1768 Rear View13

CL6700MW User ManualThis Page Intentionally Left Blank14

Chapter 3OperationOpening the ConsoleThe CL6700MW’s console is located under the top cover. To access theconsole, slide the console module out and raise the cover.Note: As a safety precaution, to keep the console from accidentally slidingout, the console is locked into the In position. Before you can pull theconsole module out, you must release it by pushing the catches on theunit's front panel as indicated below.15

CL6700MW User ManualClosing the ConsoleTo slide the console module back in, close the cover and do the following:1. Pull the safety catches on the unit's side rails toward you and push themodule in until it stops.2. Release the catches. Pull the module slightly toward you, then push it allthe way in.Note: The reason for the two step procedure is to minimize the chances of youpinching your fingers when sliding the module in.16

Chapter 3. OperationOperating PrecautionsThe maximum load bearing capacity of the keyboard module is 30 kg.Failure to heed the information below can result in damage to thekeyboard module.Right!Rest your hands and arms lightly on thekeyboard module as you work.Wrong! DO NOT lean your body weight on thekeyboard module. DO NOT place heavy objects on thekeyboard module.17

CL6700MW User ManualLCD OSD ConfigurationLCD ButtonsThe LCD OSD allows you to set up and configure the LCD display. Fourbuttons are used to perform the configuration, as described in the table, below:ButtonMENUFunction When you have not entered the LCD OSD Menu function,pressing this button invokes the Menu function, and brings upthe Main Menu. When you have entered the LCD OSD Menu function, andhave reached a setting choice with the navigation buttons,pressing this button brings up its adjustment screen.When navigating through the menus, this button moves you Rightor Up. When making an adjustment, it increases the value.When navigating through the menus, this button moves you Leftor Down. When making an adjustment, it decreases the value.EXIT When you have not entered the LCD OSD Menu function,pressing this button performs an auto adjustment. An autoadjustment automatically configures all the settings for theLCD panel to what the OSD considers their optimum values tobe. When you have entered the LCD OSD Menu function, pressingthis button exits the current menu and returns you to theprevious menu. Use it to leave an adjustment menu when youare satisfied with the adjustment you made. When you are at the Main Menu, pressing this button exits theLCD OSD.Manufacturing NumberThe “MFG Number” (Manufacturing Number) is an internal serial numberused by ATEN’s factory and technical support staff to identify products. Thisnumber does not affect products’ warranty. If your product requires after-salesservices, you may provide the MFG Number to ATEN’s sales or technicalsupport staff to identify the product and model number.18

Chapter 3. OperationAdjustment SettingsAn explanation of the LED OSD adjustment settings is given in the tablebelow:SettingBrightnessExplanationAdjusts the background black level of the screen image.ContrastAdjusts the foreground white level of the screen image.PhaseIf pixel jitter or horizontal line noise is visible on the display,your LED may have the wrong phase setting. Adjust thephase setting to eliminate these problems.ClockIf vertical banding is visible on the display, your LED mayhave the wrong clock setting. Adjust the clock setting toeliminate vertical banding.H-PositionPositions the display area on the LED panel horizontally(moves the display area left or right).V-PositionPositions the display area on the LED panel vertically(moves the display area up or down).Color TemperatureAdjusts the color quality of the display. You can adjust thewarmth value, color balance, etc. The Adjust Colorselection has a further submenu that lets you fine tune theRGB values.LanguageSelects the language that the OSD displays its menus in.OSD DurationLets you set the amount of time the OSD displays on thescreen. If there is no input for the amount of time youchoose, the OSD display turns off.ResetResets the adjustments on all menus and submenus totheir factory default settings.Note: The Language setting does not return to the factorydefault, but remains at the one that you have set it to.19

CL6700MW User ManualHot PluggingThe CL6700MW supports hot plugging – components can be removed andadded to the console by unplugging their cables from the ports without the needto shut down the CL6700MW.Powering Off and RestartingIf it becomes necessary to Power Off the CL6700MW (to upgrade thefirmware, for example), simply turn off the power to the unit using the rearpanel power switch. To restart the CL6700MW, turn the rear panel powerswitch back on.Port ID Numbering & Port SelectionPort ID numbering and Port Selection follow the method used by the KVMswitch connected to the CL6700MW. Consult your KVM switch's UserManual for details.20

Chapter 3. OperationHotkeysConsole selection is accomplished with the following hotkey combinations:CombinationActionBeepsLEDs[Ctrl] [Alt] [Shift] [P] [C][Enter]To select normal mode (pc, etc.).2None[Ctrl] [Alt] [Shift] [M] [A] [C][Enter]To select Mac2None[Ctrl] [Alt] [Shift] [S] [U] [N][Enter]To select SUN2None[Ctrl] [Alt] [Shift]Activates the Firmware UpgradeMode.None3Flashing[u] [p] [g] [r] [a] [d] [e][Enter]Note: this Hotkey sequence onlyworks when the firmware upgradeswitch (see page 24) is in theNormal position.whenupgradeis inprocess[Ctrl] [Alt] [Shift] [L] [Enter]Enable Local (LCD) console; Disable2nd console or external consolevideo.2None[Ctrl] [Alt] [Shift] [R] [Enter]Enable 2nd console, or externalconsole video; Disable Local (LCD)console.2None[Ctrl] [Alt] [Shift] [L] [R][Enter] orEnable both consoles (default).2None[Ctrl] [Alt] [Shift] [F11] [F][Enter]Set the KVM port to be full speedUSB.2None[Ctrl] [Alt] [Shift] [F11] [L][Enter]Set the KVM port to be low speedUSB.2None[Ctrl] [Alt] [Shift] [U] [M][Enter]Configures the front USB Port tomouse mode (Mouse functionality isimmediate upon switching to USBmouse mode). (USB mouse mode[U] [M] is the default)2None[Ctrl] [Alt] [Shift] [U] [P][Enter]Configures the front USB Port toperipheral mode.2None[Ctrl] [Alt] [Shift] [R] [L][Enter]Note: 1. Press the keys in sequence – one key at a time. First [Ctrl], then [Alt],then [Shift], etc.21

CL6700MW User Manual2. Console selections are not saved. If the CL6700MW is powered off,it reverts to the default setting of both consoles enabled when it ispowered on again.3. Either side of the keyboard can be used to invoke [Shift] [Ctrl] [Alt]hotkeys.4. If the KVM switch connected to the CL6700MW uses the [Ctrl] [Alt][Shift] combination to invoke its hotkey mode, you won't be able toaccess any of its hotkey operations because the CL6700MW willcapture the combination for console selection first.22

Chapter 4Firmware UpgradeThe Firmware Upgrade Utili

CL6700MW User Manual 4 Operating Systems Supported operating systems are shown in the table below. OS Version Windows NT or later Linux RedHat 9.0 or later SuSE 10 or later Mandriva (Mandrake) 9.0 or later UNIX AIX 4.3 or later FreeBSD 5.5 or later Sun Solaris 8 or later Novell Netware 5.0 or later Mac 9.0 or later

Related Documents:

Both distribution amplifiers accept one single link DVI-D input and drive two (DVI DA2) or four (DVI DA4) single link DVI-D output signals. 0.4A MA12V X POWER DVI-D INPUT DVI-D OUTPUT 1 2 DVI DA2 Extron DVI DA 2 Distribution Ampli er PC w/ DVI Output Local Monitor Flat Panel Display w/ DVI In

1 DVI EXTRON DVI 101 Equaliser 1 DVI 104 Tx/Rx Multimode 4 fibre link 2 Terminals DVI, on stage and in control room 1 SANYO PLC-HF 10000L (10000 lights/ just 2K) Videoprojector 1 EXTRON SW DVI Switcher with 4 inputs and 1 output. Our video channel can support up to 2k formats. 1 ANALOG

extron 60-931-21_4 dvi-d o/p 1 dvi-d i/p dvi-d o/p 2 dvi-d o/p 3 dvi-d o/p 4 dvi_2.2.1. .

Before setting up your LCD Monitor Some LCD Monitor models are packaged with a detached Table-Top Stand so you can mount your LCD Monitor to a wall right away. See page 10 (Installing the LCD Monitor to the Wall) if you want to mount the LCD Monitor to a wall. If you are not mounting the LCD Monitor to a wall, you will

Monitores LCD da HP Os monitores LCD da HP (visor de cristais líquidos) têm uma matriz activa, o ecrã Thin-Film Transistor (TFT - transístor de película fina). Este manual refere-se aos seguintes modelos: vp15 Monitor LCD vp17 Monitor LCD vp19 Monitor LCD FP1707 Monitor LCD WF1907 Monitor LCD w1707 Monitor LCD

The XL1708 VGA 17” LCD KVM console is a control unit that allows access to multiple computers from an USB or PS/2 KVM console. An extra console port is provided on the rear panel to manage the LCD KVM switch from an external console. It allows to access and control up to 8 computers fro

104-key keyboard with touchpad One man installation design Modern, molded front handle with two point lock DF117 1U Dual Slide 17" FHD LCD Console Drawer Benefits 1U 21" LCD console drawer 1920 x 1080 native resolution 16.7M colors DVI-D VGA video input / USB KB / MS 104-key keyboard with either touchpad or trackball One man installation design

104-key keyboard with touchpad One man installation design Modern, molded front handle with two point lock DF117 1U Dual Slide 17" FHD LCD Console Drawer Benefits 1U 21" LCD console drawer 1920 x 1080 native resolution 16.7M colors DVI-D VGA video input / USB KB / MS 104-key keyboard with either touchpad or trackball One man installation design