Power Factor Controller RVC The User-friendly PF Controller - ABB
Power Factor Controller RVCThe user-friendly PF controller
RVC: the user-friendly PF controllerLCD DisplayIndicates a demand for switching on/off acapacitor stepAlarm indicationActive outputsDisconnection indicationOvertemperature indicationUser programmable parameters/ measurementKeypadInductive/capacitive PFMeasurement unitProgrammable parameters : Target Power Factor (cos j) Phase shift (for special connections) C/k (starting current) Switching delay times Switching sequenceAutomatic / manual set modeAutomatic setting of : Phase shift C/k Switching delay Type of switchingsequencePowerful features Common range for all network voltages from 100V to 440V. Measurement and display of key parameters like voltage,current, power factor, THDV and THDI. Fully programmable switching sequence. 1A or 5A current input. Easy commissioning. Complete auto set-up (starting current-C/k, type of switchingsequence, phase shift, special connections). Easy to use thanks to a user-friendly interface and ease ofaccess to parameters for manual setting. Highly efficient switching strategy combining integral, direct andcircular switching. This allows to : control the cos j in presence of rapidly varying loads, reduce the number of switching, avoid unnecessary intermediary switchings, increase the lifetime of the capacitors and contactors.2 RVC: the user-friendly PF controller Power Factor Controller RVCEasy commissioning with automaticrecognition of Special connections (single-phase, CT leads) Number of outputs Type of switching sequence Suitable for hot environments thanks to max. ambienttemperature rating of 60 C. Not affected by the harmonics. Overvoltage / undervoltage protection and protections againstharmonic distortion (THDV). Alarm : an alarm contact is opened when any of theseconditions are reached: the target cos j is not reached within 6 minutes after alloutputs have been switched on, the internal temperature of the RVC rises above 85 C, overvoltage / undervoltage limits are reached, the power supply is out of range, the THDV exceeds the limits.
Easy commissioning and programmingEasy commissioningThe AUTO SET mode allows the RVC commissioning in only 2simple steps :Easy programmingAll parameters are easily accessible for manual setting.AUTOActivation of the automatic setting of : Phase shift C/k Switching sequenceMANAUTO SETPHASEC/kDELAYSTEPSMAN SET - COSMAN SET - PHASEMAN SET - C/kMAN SET - DELAYandSetting of the target cos jMAN SET - STEPSto change valueMAN SET - FEATURE: LINEAR-CIRCULARMAN SET - FEATURE: REGENERATIVE COSMAN SET - PROTECTION: OVERVOLTAGEMAN SET - PROTECTION: UNDERVOLTAGEMAN SET - PROTECTION: OVER THDVorEasy commissioning and programming Power Factor Controller RVC 3
Wiring diagram K, IL2, L3M1, M2A1-12leads of the current transformer2 of the 3 phases (not monitored by the CT)leads of the normally open contactoutput relay common sourceoutputsWiring diagram Power Factor Controller RVC 4
Technical specificationsMeasuring system:micro-processor system for balanced three-phase networks orsingle-phase networks.Saving-function: all programmed parameters and modes aresaved in a non-volatile memory.Operating voltage: 100V to 440V.Power outage release: quick automatic disconnection in lessthan 20ms (50Hz) in case of power outage or voltage drop.Voltage tolerance: /- 10% on indicated operating voltages.Power outage reset delay time: 40 s.Frequency range: 50 or 60 Hz /- 5% (automatic adjustment tonetwork frequency).Overvoltage and undervoltage protection.Measuring circuit terminals (L2, L3 and k, I): CAT III rated.Autoadaptation to the phase-rotation of the network and theCT-terminals.Current input: 1A or 5A (RMS).Not affected by the harmonics.Current input impedance: 0.1 Ohm (recommended CT class1.0, 10 VA min).Working with generative and regenerative loads.LCD contrast automatically compensated with temperature.Consumption of the controller: 8 VA max.Operating temperature: -10 C to 60 C.Output contact rating: max. continuous current: 1.5A; max. peak current: 5 A; max. voltage: 440Vac; terminal A is rated for a continuous current of 16A.Storage temperature: - 30 C to 85 C.Mounting position: vertical panel mounting.Dimensions: 144x144x80 mm (hxwxd).Alarm contact: normally open contact; max. continuous current: 5 A; rated/max. breaking voltage: 250Vac/440 Vac.Cut-out dimensions: 138x138 mm (hxw).Weight: 0.4 kg (unpacked).Power Factor setting: from 0.7 inductive to 0.7 capacitive.Connector: spring clamp terminal block.Starting current setting (C/k): 0.01 to 3A. automatic measurment of C/k.Front plate protection: IP40.Number of outputs: RVC-3:programmable up to 3 outputs RVC-6:programmable up to 6 outputs RVC-8:programmable up to 8 outputs RVC-10:programmable up to 10 outputs RVC-12:programmable up to 12 outputsCE marked.Switching time between steps: programmable from 1s to 999s(independent of reactive load).Switching sequences: user defined.Mode of switching: the mode of switching for all the programmable switching sequences is integral, direct, circular or linear.5 Technical specifications Power Factor Controller RVCRelative humidity: maximum 95%, non-condensing.Article numbers for ordering: RVC-3:2GCA288098A0050 RVC-6:2GCA288097A0050 RVC-8:2GCA288096A0050 RVC-10:2GCA288095A0050 RVC-12:2GCA288094A0050
ABB n.v.Power Quality ProductsAvenue Centrale 10Zoning Industriel de JumetB-6040 Charleroi (Jumet), BelgiumPhone: 32 (0) 71 250 811Fax: 32 (0) 71 344 007E-Mail: Power.Quality@be.abb.comWhile all care has been taken to ensure thatthe information contained in this publication iscorrect, no responsibility can be accepted forany inaccuracy. We reserve the right to alteror modify the information contained hereinat any time in the light of technical or otherdevelopments. Technical specifications arevalid under normal operating conditions only.We do not accept any responsibility for anywww.abb.com/lowvoltagemisuse of the product and cannot be heldliable for indirect or consequential damages. Copyright 2010 ABB. 2GCS301017A0050 - June 2010Contact us
2 RVC: the user-friendly PF controller Power Factor Controller RVC RVC: the user-friendly PF controller Indicates a demand for switching on/off a capacitor step Alarm indication Inductive/capacitive PF Measurement unit Programmable parameters : Target Power Factor (cos j ) Phase shift (for special connections) C/k (starting current)
Using The V-RVC-PRO With Other Amplifiers (requires the optional V-RVC-RJ45) The V-RVC-PRO or multiple V-RVC-PRO units can be connected to any amplifier, mixer, pre-amplifier or receiver using the optional V-RVC-RJ45 which converts the cat5/6 cable and RJ45 jack to individual outputs. The V-RVC-RJ45 includes a power supply with enough
May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)
Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .
On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.
̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions
Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have
SYNC3-RVC Interface 3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com SYNC3-RVC NTV-KIT957 Overview The SYNC3-RVC interfaces a backup camera input (and 1 additional video input) to the factory media screen in select Ford vehicles equipped with SYNC 3 (8" only) media systems (2016
Introduction to Qualitative Field Research 3 01-Bailey-(V-5).qxd 8/14/2006 6:24 PM Page 3. He observed, interviewed, and took photographs of them, even one of “Primo feeding cocaine to Caesar on the benches of a housing project courtyard” (p. 101). Purpose of Research and Research Questions Although all field research takes place within natural settings, it serves different purposes. It is .
