APEX (4 BIKE CARRIER) 9025 , APEX (5 BIKE CARRIER) 9026 - CARiD

1y ago
15 Views
2 Downloads
804.17 KB
7 Pages
Last View : 1m ago
Last Download : 2m ago
Upload by : Matteo Vollmer
Transcription

QUICK START GUIDE for: APEX (4 BIKE CARRIER) Fold up stinger to 90 degrees. (STEP 1). Pull back on Auto Pin to engage in receiver hole. Use knob to tighten. Lock. DO Load heaviest bike first - front to the right (STEP 6). Alternate bike direction. Secure bicycle to rack with rubber straps and black safety strap through the frames and around the mast of the rack (STEP 8). Check tightness of all bolts and knobs periodically (every 6 months). Check rubber straps for wear and replace if worn. DO NOT Install on a trailer or other towed vehicle. Put more than 2 bikes on a class 1 hitch. Do not “overstretch” the straps. Use the rack while traveling on dirt roads. Use the rack to carry tandems or recumbents. Put more than the intended number of bikes on the rack. 5015924 04 9025, APEX (5 BIKE CARRIER) 9026

APEX APEX 9025 9026 ( 4 BIKE CARRIER ) ( 5 BIKE CARRIER ) PARTS INCLUDED H G F I J A B description D E K L part number 9025 qty. Apex ( 4 bike carrier) / — 1 Apex ( 5 bike carrier) / — part A C 9026 qty. 1 B ripple strap / 8523006001 12 15 C anti-sway with overmold / 8523037001 4 5 D anti-sway angled extension / 8523108001 2 2 E buckle strap / 753203017 1 1 F Apex 2" hitch adapter / 8523185001 1 1 G M8 lock knob / 753190902 1 1 H cradle overmold / 8523503001 8 10 I M8 X 30 flat head screw / 8523136001 2 2 J hex key 5mm / K lock, 2 cylinders, 2 keys per each part / L lock cylinder change key / WARNINGS / LIMITATIONS Number of bicycles should not exceed designated carrying capacity for your specific Apex model. Check tightness of all bolts and knobs periodically. Check straps for wear and replace if worn. Not intended for off-road use. Not intended for tandems or recumbents. Do not exceed weight per class of receiver class 1 2 bike class 2 and up 4 or 5 bikes (150 lbs. max) Do not install on a trailer or other towed vehicle. Failure to use strap may result in loss of bicycles. 5015924 04 8530930 1 1 — — — 8531251 1 1

1 SET UP / Pull up on lower Hitch Switch and rotate stinger perpendicular to mast. 2 STINGER INSTALLATION / A FOR 2" RECEIVERS ATTACH 2" ADAPTER B A ttach carrier to receiver by pulling back gently on Auto Pin while sliding stinger into receiver. U sing hex key attach adapter sleeve to stinger with two M8 x 30 flat head screws. C D O nce Auto Pin clears receiver lip, release Auto Pin so that it rests against receiver. E I nstall lock cylinder into lock knob on stinger assembly with Change Key. P ush carrier in until Auto Pin engages with the receiver hole as illustrated. F F irmly tighten locking knob to secure carrier in receiver. NOTE: 5015924 04 Knob will not tighten fully without lock cylinder inserted.

3 BICYCLE TRANSPORTATION B A Lift Hitch Switch Lever as illustrated. W ith the other hand lift bike arm assembly upward until the Hitch Switch “clicks” into position. Reverse operation to store or when traveling with no bike attached. 4 Attach cradle strap to cradle. 5015924 04

5 3 A 1 4 B C 2 Attach anti-sway angled extension to underside of cradles 1 and 4 as illustrated. 6 A Load heaviest bike first onto the inner most cradles - handle bars facing passenger side of vehicle. Fasten cradle straps. Use Thule Frame Adaptor (#982XT, sold separately) for bikes without traditional top tubes. 5015924 04 B

7 ATTACHING HOLD FAST ANTI-SWAY CAGES A B T o attach anti-sway cage, hold horizontal with smooth edge facing down and slide C-slot opening onto Anti-sway Extension / Cradle. Swing down to vertical position. Place smooth curved surface against seat tube and attach strap as shown. Mount bikes in alternate directions. 8 Secure bikes to mast of carrier with black strap. 9 NOTE: BIKES MUST BE REMOVED TO LOWER CARRIER. Firmly hold the mast of the carrier with one hand. Lift lower Hitch Switch lever as illustrated. 5015924 04

10 SECURITY INSTALLING END CAP LOCK CORE A B I nstall lock cylinder into locking end cap with Change Key. USING LOCKING CABLE / A B Lock bikes to carrier with cable lock. 5015924 04

APEX (4 BIKE CARRIER) 9025 , APEX (5 BIKE CARRIER) 9026 DO. DO NOT Fold up stinger to 90 degrees. . Lock. Load heaviest bike first - front to the right (STEP 6). Alternate bike direction. Secure bicycle to rack with rubber straps and black safety strap through the frames and around the . lock cylinder change key / 8531251: 1 .

Related Documents:

Create and Set Up an APEX Service Instance3-2. Create an APEX Service Instance3-2. Set Up a New APEX Service3-4. Upgrade to Oracle Autonomous Database3-6. Access APEX Service. Access APEX Service from the OCI Console UI4-1. Navigate to the APEX Instances Page4-1. About the APEX Instances Page4-3. About the APEX Instance Details Page4-4

Maya DCC plug-in overview APEX Integration Demos APEX Modules APEX Destruction APEX Particles . OBJ FBX BMP USER APEX Destruction Renderer PhysX SDK APEX Core APX APEX Asset file Mesh data & Fracture Map. APEX Particles Full Collision with

Bike, dirt bike PART # 10056 16 oz. Tube Sealant Bike, dirt bike, wheelbarrow Family Size PART # 10056HT 16 oz. Tube Sealant with hang tag Bike, dirt bike, wheelbarrow Family Size PART # 10159 3 oz. Slime Pro Tubeless Sealant Bike PART # 10160SL 8 oz. Slime Pro Tubeless Sealant Bike PART # 10004 16 oz. Tube Sealant B

Thule Bike Wheel Holder To be used in conjunction with the Fork Mounted Bike Carrier, this accessory allows you to mount your bike’s front wheel to the roof of your vehicle.* SOA567B030 Thule Bike Carrier – Roof Mounted This bike carrier features self-adjusting jaws that automati

Vixia HF S10/S100 Vixia HF10/HF11 Vixia HF100 Vixia HF20/HF200 Vixia HG10 Vixia HR10 Vixia HV20 Vixia HV30 Vixia HV40 ZR80/85/90 ZR800 ZR830/850 ZR900 ZR930 ZR950 ZR960 EXILIM EX-FC100 EXILIM EX-FH2

5.4 Plugging in a PDB When 21.2 Oracle APEX Is Installed in the Root Container 5-11 5.4.1 Scenario 1: Plug-in Non-CDB with Oracle APEX 5-12 5.4.2 Scenario 2: Plug-in PDB with a Common APEX from Another CDB 5-12 5.4.3 Scenario 3: Plug-in PDB with a Local Oracle APEX from Another CDB 5-13 5.4.4 Scenario 4: Plug-in Non-CDB or PDB with No Oracle .

Cora Bike Rack - Bike Maintenance Stand and Pump (BMSP) This instruction sheet is to be used for installation of the BMSP Cora Bike Maintenance Stand and Pump Cora Bike Rack - Australia’s Bike Parking Expert

counseling appointments. ontact Army hild Youth Services re-garding hourly childcare. an I see another provider? Absolutely. After your appointment, please speak with a MSA and they will be happy to assist you in scheduling an appointment with another provider. Frequently Asked Questions