E R Ed Ar T C S H It G E C R T Albany City Hall S G O N It Department

SHEET LIST 333 Broadalbin St. SW, Albany, OR 97321 COVER SHEET CODE SHEET ACCESSIBLE DETAILS FLOOR PLAN SCHEDULES REFLECTED CEILING PLAN - DEMO REFLECTED CEILING PLAN - NEW CONSTRUCTION INTERIOR DETAILS TE A REGULATIONS: 1. THE CONTRACTOR SHALL HAVE EVIDENCE OF CURRENT WORKER'S COMPENSATION INSURANCE ON FILE IN COMPLIANCE WITH LOCAL CODE. 2. BEFORE COMMENCING WITH THE WORK, THE GENERAL CONTRACTOR SHALL SHOW EVIDENCE OF ALL REQUIRED INSURANCE. 3. THE CONTRACTOR SHALL BE FAMILIAR WITH ALL OWNER REQUIREMENTS AND SHALL BE RESPONSIBLE FOR COMPLIANCE. THE CONTRACTOR SHALL INVESTIGATE LOCAL CODES AND PROCEDURES AND SHALL COMPLY WITH ALL REQUIREMENTS. 4. SIGN CONTRACTOR TO OBTAIN SIGN PERMITS FROM BUILDING DEPARTMENT AS APPLICABLE. 5. ALL CONDUIT, EQUIPMENT AND MATERIAL SHALL BE IN FULL ACCORDANCE WITH THE LATEST SAFETY RULES AND REGULATIONS OF ALL AUTHORITIES AND AGENCIES HAVING JUSIDICTION. 6. THE CONTRACTOR SHALL MAINTAIN FOR THE ENTIRE DURATION OF THE WORK ALL EXITS, EXIT LIGHTING, FIRE PROTECTION DEVICES, AND ALARMS IN COMFORMANCE WITH ALL APPLICABLE CODES AND ORDINANCES. A0.00 A0.01 A0.02 A2.01 A4.01 A6.01 A6.02 A9.00 NOTE: MECHANICAL, ELECTRICAL, AND PLUMBING WILL BE SUBMITTED UNDER SEPARATE COVER BY CONTRACTORS HIRED. FIRE PROTECTION: 1. PROVIDE SMOKE DETECTORS AS REQUIRED BY CODE. 2. PROVIDE STREET ADDRESS WITH NUMBERS FACING THE STREET AS REQUIRED BY FIRE MARSHAL. 3. CONSTRUCT FIRE BARRIER WALLS PER PLANS, IF SHOWN. CONTACT LIST JOB SITE OPERATIONS: 1. DURING ALL PHASES OF WORK, DO NOT DISTURB THE DELIVERIES AND FUNCTIONS OF THE ADJACENT AND NEIGHBORING PROPERTY OWNERS. 2. EACH CONTRACTOR SHALL LEAVE THE SITE IN A NEAT, CLEAN, AND ORDERLY CONDITION UPON THE COMPLETION OF HIS WORK ON A DAILY BASIS. AREA OF WORK TO BE DUSTED, SWEPT, AND MOPPED TO THE SAME CONDITION AS START OF WORK. ALL WASTE, RUBBISH AND EXCESS MATERIALS SHALL BE REMOVED FROM THE SITE PROMPTLY. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL AND DISPOSAL OF ALL TRASH, INCLUDING TRASH GENERATED FROM THE OWNER FURNISHED ITEMS AND BY OWNER'S CONTRACTORS FOR HTE DURATION OF THE PROJECT. 3. ALL EXISTING WORK NOT IN THIS SCOPE OF WORK SHALL BE MAINTAINED IN ITS ORIGINAL CONDITION, U.O.N., PROJECT WORK FROM DAMAGE RESULTING FROM THIS WORK. 4. REMOVE ALL ABANDONED IMPROVEMENTS, INCLUDING ELECTRICAL AND MECHANICAL, U.O.N. DRAWINGS: 1. ALL CONTRACTORS, SUBCONTRACTORS, VENDORS, AND MATERIAL SUPPLIERS SHALL BE RESPONSIBLE FOR REVIEWING THE COMPLETE SET OF DOCUMENTS AS SHOWN IN THE SHEET INDEX. FAILURE TO REVIEW CONSTRUCTION DOCUMENTS WILL NO RELIEVE ANY CONTRACTORS, SUBCONTRACTORS, VENDORS, OR MATERIAL SUPPLIERS FROM PERFORMING WORK OR PROVIDING MATERIALS REQUIRED FOR COMPLETION OF THE PROJECT AS DEFINED WITHIN THE DOCUMENTS AT TIME OF BID. 2. GENERAL CONTRACTOR SHALL COORDINATE WORK PERFORMED BY OTHER CONTRACTORS. ANY DISCREPENCIES SHALL BE BROUGHT TO THE ARCHITECT'S ATTENTION BEFORE PROCEEDING WITH WORK. 3. SHOULD A CONFLICT EXIST BETWEEN THE CONSTRUCTION DOCUMENTS AND/OR THE SPECIFICATIONS, THE ARCHITECT SHALL BE INFORMED OF THIS DISCREPANCY IMMEDIATELY, AT WHICH TIME THE ARCHITECT SHALL PROVIDE DIRECTION ON HOW TO PROCEED. 4. INSPECT SITE AND VERIFY FIELD DIMENSIONS BEFORE COMMENCING WITH CONSTRUCTION. NOTIFY ARCHITECT IMMEDIATELY IF THERE ARE ANY SIGNIFICANT DISCREPANCIES. 5. DO NOT SCALE THE DRAWINGS. WRITTEN DIMENSIONS TAKE PRECEDENCE OVER SCALED DRAWINGS. 6. LARGER SCALE DETAILING SHALL TAKE PRECEDENCE OVER SMALLER SCALE--VERIFY WITH ARCHITECT. 7. ARCHITECTURE DRAWINGS TAKE PRECEDENCE OVER OTHER DRAWINGS FOR LAYOUT, DIMENSIONS, AND NUMBER OF ITEMS PROVIDED. UPON DISCREPENCIES BETWEEN ARCHITECTURAL DRAWINGS AND ENGINEERING DRAWINGS, ARCHITECT SHALL BE IMMEDIATELY NOTIFIED IN WRITING. 8. IF ANY ERRORS OR OMISSIONS APPEARS IN CONTRACT DOCUMENTS, CONTRACTOR SHALL NOTIFY ARCHITECT IN WRITING OF SUCH ERRORS OR OMISSIONS. 9. DIMENSIONS SHOWN ON PLANS ARE TO FACE OF EXISTING WALLS OR CENTERLINE OF STUDS OF NEW WALLS, U.O.N. 10. DOORS NOT LOCATED BY DIMENSION ON PLANS OR DETAILS SHALL BE 5" FORM EDGE OF DOOR OPENING TO FINISH FACE OF ADJACENT WALL. 11. ALL RECESSED ELECTRICAL PANELS & CABINETS & OTHER RECESSED CABINETS SHALL BE BACK WITH A LAYER OF GYPSUM WALL BOARD. 12. THE CONTRACTOR SHALL REVIEW ALL DOCUMENTS, VERIFY ALL DIMENSIONS AND FIELD CONDITIONS, AND CONFIRM WORK IS BUILDABLE AS SHOWN. ANY CONFLICTS OR OMISSIONS, ETC. SHALL BE IMMEDIATELY REPORTED TO THE ARCHITECT/OWNER FOR CLARIFICATION PRIOR TO PERFORMANCE OF ANY WORK IN QUESTION. 13. CONSULT PLANS OF ALL WORK FOR ALL OPENINGS & ROUGH-OUTS THROUGH WALLS, CEILINGS, & ROOFS FOR DUCTS, PIPES, CONDUITS, CABINETS, & EQUIPMENT. VERIFY SIZE & LOCATION BEFORE PROCEEDING WITH WORK. 14. CONSULT WITH MECHANICAL CONTRACTOR FOR EXACT LOCATIONS OF ACCESS REQUIRED BY THEIR WORK. ACCESS MUST BE PROVIDED FOR ALL CONCEALED VALVES, CONTROLS, DUCTS, ELECTRICAL JUNCTION BOXES, ETC. 15. GRID LINES (OR COLUMN CENTER LINES) ARE SHOWN FOR REFERENCE. 16. A COPY OF APPROVED BUILDING PERMITS WITH ADDENDA AND BULLETINS MUST BE ON SITE AT ALL TIMES DURING CONSTRUCTION. 17. THE STRUCTURE SHOWN ON THESE DRAWINGS IS STRUCTURALL SOUND ONLY IN ITS COMPLETE FORM. THE CONTRACTOR SHALL PROVIDE ALL NECESSARY BRACING TO STABILIZE THE BUILDING DURING CONSTRUCTION. VARITONE ARCHITECTURE, LLC 231 SW 2nd Ave. ALBANY, OR 97321 PH: (541) 497-2954 CELL: (541) 224-2210 CONTACT: CHRISTINA LARSON, AIA CONTRACTOR: TO BE SELECTED APPLICABLE BUILDING CODES APPLICABLE CODES (PER DESIGN REQUIREMENTS FOR THE CITY OF ALBANY) TENANT: CITY OF ALBANY IT DEPARTMENT CONTACT: JORGE SALINAS PH: 541-704-2304 JURISDICTION: THE CITY OF ALBANY DEVELOPMENT DEPARTMENT 333 BROADALBIN ST SW ALBANY, OR 97321 PH: (541) 917-7500 OREGON STRUCTURAL SPECIALTY CODE (OSSC) 2014 OREGON MECHANICAL SPECIALTY CODE (OMSC) 2014 OREGON PLUMBING SPECIALTY CODE (OPSC) 2014 OREGON ELECTRICAL SPECIALTY CODE (OESC) 2014 ALL STATE & LOCAL ORDINANCES CURRENT SHALL MEET ALL RELEVANT VERSIONS OF NFPA CURRENT G PROJECT SUMMARY ABBREVIATIONS ACCESSIBILITY INFORMATION: & @ ø # AND AT CENTERLINE DIAMETER NUMBER / POUND PLATE / PROPERTY LINE LESS THAN GREATER THAN AB ABV A/C ACOUS ACT AFF ALM ALUM APPROX ARCH ANCHOR BOLT ABOVE AIR CONDITIONING ACOUSTICAL ACOUSTIC CEILING TILE ABOVE FINISH FLOOR ALARM ALUMINUM APPROXIMATE ARCHITECTURAL BD BLDG BLK BLKG BM BN BOT BTWN BUR BOARD BUILDING BLOCK BLOCKING BEAM BOUNDARY NAILING BOTTOM BETWEEN BUILT-UP ROOF C CATV CB CER CI C/J CLG CLOS CLR CMU CAMBER CABLE TELEVISION CATCH BASIN CERAMIC CAST IRON CEILING JOIST CEILING CLOSET CLEAR CONCRETE MASONRY UNIT CLEANOUT C/O COLUMN COL CONCRETE CONC CONNECTION CONN CONSTR CONSTRUCTION CONTINUOUS CONT COUNTERSINK CTSK CUBIC YARD CUYD DBL DEMO DEPT DTL DF DIA DIM DIST DN DR DS DWG (E) E EA EJ ELEC ELEV EP EQ EQUIP EXT DOUBLE DEMOLITION DEPARTMENT DETAIL DOUGLAS FIR DIAMETER DIMENSION DISTANCE DOWN DOOR DOWN SPOUT DRAWING EXISTING EAST EACH EXPANSION JOINT ELECTRICAL ELEVATION ELECTRICAL PANEL EQUAL EQUIPMENT EXTERIOR FND FD FF FIN FIXT FLR FL FLUOR FH FOM FOS FOW FS FT FTG FURR GA GALV GC GI GLB GL GND GYP FOUNDATION FLOOR DRAIN FINISH FLOOR FINISH FIXTURE FLOOR FLOW LINE FLUORESCENT FIRE HYDRANT FACE OF MASONRY FACE OF STUD FACE OF WALL FLOOR SINK FOOT / FEET FOOTING FURRING GAGE / GAUGE GALVANIZED GENERAL CONTRACTOR GREASE INTERCEPTOR GLU-LAM BEAM GLASS GROUND GYPSUM HB HC HDR HDW HT HM HORIZ HP HTG HDWD HVAC HOSE BID HOLLOW CORE HEADER HARDWARE HEIGHT HOLLOW METAL HORIZONTAL HIGH POINT HEATING HARDWOOD HEATING, VENTILATION & AIR CONDITIONING ID IE IN INFO INSUL INT JAN JT INSIDE DIAMETER INVERT ELEVATION INCH / INCHES INFORMATION INSULATION INTERIOR JANITOR JOINT L LAM LAV LB(S) LF LT LENGTH LAMINATE / LAMINATED LAVATORY POUND / POUNDS LINEAR FOOT / FEET LIGHT MACH MAX MB MECH MED MEZZ MFGR MH MIN MISC MO MTD MTL MULL MACHINE MAXIMUM MACHINE BOLT MECHANICAL MEDIUM MEZZANINE MANUFACTURER MANHOLE MINIMUM MISCELLANEOUS MASONRY OPENING MOUNTED METAL MULLION N/R (N) N NIC NFVA NOT RATED NEW NORTH NOT IN CONTRACT NET FREE VENTILATION AREA NUMBER NOMINAL NOT TO SCALE NO NOM NTS O/A OAR OC OD OF OFCI OCOI OPG OPP ORD ORS OSSC PARTN PLAM PLYWD PNL POC PR PSI PSF PT PVC OVERALL OREGON ADMINISTRATIVE RULES ON CENTER OUTSIDE DIAMETER OUTSIDE FACE OWNER FURNISHED CONTRACTOR INSTALLED OWNER FURNISHED OWNER INSTALLED OPENING OPPOSITE OVERFLOW ROOF DRAIN OREGON REVISED STATUTES OREGON STRUCTURAL SPECIALTY CODE PARTITION PLASTIC LAMINATE PLYWOOD PANL POINT OF CONNECTION PAIR POUNDS PER SQUARE INCH POUNDS PER SQUARE FOOT PRESSURE TREATED POLYVINYL CHLORIDE QT QUARRY TILE R RAD RB RD RDWD REF REFR REINF RISER RADIUS RUBBER BASE ROOF DRAIN REDWOOD REFERENCE REFRIGERATOR REINFORCED REPL REQ'D RESIL REV RM RO ROM ROW RS REPLACE REQUIRED RESILIENT REVISION ROOM ROUGH OPENING ROUGH ORDER OF MAGNITUDE RIGHT OF WAY RESAWN S SC SCHED SECT SHT SHTG SIM SP SPEC SQ SQFT SQIN SS STD STL STOR STRUCT SYM SOUTH SOLID CORE SCHEDULE SECTION SHEET SHEATHING SIMILAR SPANDREL SPECIFICATION SQUARE SQUARE FOOT / FEET SQUARE INCH STAINLESS STEEL STANDARD STEEL STORAGE STRUCTURAL SYMMETRICAL T TB TC TEL T&G THK TJ TOP TP THRU TS TYP UL TEMPERED TOP OF BEAM TOP OF CURB TELEPHONE TONGUE & GROOVE THICK TOP OF JOIST TOP OF PARAPET TOP OF PAVEMENT THROUGH TUBE STEEL TYPICAL UNDERWRITERS LABORATORY UNLESS OTHERWISE NOTED UON VCT VERT VEST VTR VINYL COMPOSITE TILE VERTICAL VESTIBULE VENT THROUGH ROOF W W/ WC WD WF WH W/O WP WR WRB WEST WITH WATER CLOSET WOOD WIDE FLANGE WATER HEATER WITHOUT WATERPROOF WATER RESISTANT WEATHER RESISTANT BARRIER WELDED WIRE FABRIC WWF SCOPE OF ARCHITECTURAL SERVICES: VARITONE ARCHITECTURE LLC HAS PERFORMED THE ARCHITECTURAL DESIGN AND PREPARED THE WORKING DRAWINGS FOR THIS PROJECT. CONSTRUCTION MUST BE PERFORMED IN STRICT ACCORDANCE WITH THE DRAWINGS. ANY DEVIATION FROM DRAWINGS MUST BE BROUGHT TO THE ATTENTION OF VARITONE ARCHITECTURE LLC. ERRORS AND/OR OMISSIONS FOUND ON THE DRAWINGS MUST BE BROUGHT TO THE ATTENTION OF VARITONE ARCHITECTURE LLC IMMEDIATELY. 1. ALL PUBLIC USE & COMMON USE AREAS SHALL BE ACCESSIBLE PER 2014 OSSC, CHAPTER 11. -SEE ACCESSIBLE DETAILS FOR MORE INFORMATION FIELD MEASUREMENTS AND THE VERIFICATION OF FIELD DIMENSIONS ARE NOT PART OF VARITONE ARCHITECTURE'S RESPONSIBILITY. THE CONTRACTOR MUST CHECK ALL (ASSUMED) EXISTING CONDITIONS SHOWN ON THESE DRAWINGS FOR ACCURACY AND NOTIFY VARITONE ARCHITECTURE LLC OF ANY DISCREPANCIES. OMISSIONS FROM THE DRAWINGS OR SPECIFICATIONS OR THE ADVERTENT MISLABELING OF DETAILS OF WORK WHICH ARE NECESSARY TO CARRY OUT THE INTENT OF THE DRAWINGS AND SPECIFICATIONS, OF WHICH ARE CUSTOMARILY PERFORMED, SHALL NOT RELIEVE THE CONTRACTOR FROM PERFORMING SUCH OMITTED OR INADVERTENTLY MISLABELED DETAILS OF WORK, BUT THEY SHALL PERFORM AS IF FULLY AND CORRECTLY SET FORTH AND DESCRIBED IN THE DRAWINGS AND SPECIFICATIONS. PREFABRICATED SYSTEMS DESIGNED BY OTHERS: VARITONE ARCHITECTURE LLC IS RESPONSIBLE FOR THE DESIGN OF PRIMARY STRUCTURAL SYSTEMS, EXCEPT FOR ANY COMPONENTS NOTED AS PRE-MANUFACTURED ON THE PLANS OR IN THE SPECIFICATIONS. RESPONSIBILITY FOR ANY SECONDARY STRUCTURAL & NON-STRUCTURAL SYSTEMS NOT SHOWN ON THE DRAWINGS REST WITH THE MANUFACTURER OF THAT SYSTEM. DEFERRED DOCUMENTS DEFERRED SUBMITTALS AND/OR SHOP DRAWINGS SHALL FIRST BE SUBMITTED TO THE ARCHITECT AND/OR ENGINEER FOR REVIEW AND COORDINATION FOLLOWING THE COMPLETION OF THE REVIEW AND COORDINATION BY THE ARCHITECT OF RECORD; A SUBMITTAL MAY THEN BE MADE TO THE CITY BUILDING DEPARTMENT FOR REVIEW AND APPROVAL, WHICH SHALL INCLUDE A LETTER STATING THIS REVIEW AND COORDINATION HAS BEEN PERFORMED AND COMPLETED AND PLANS AND CALCULATIONS FOR THE DEFERRED ITEMS ARE FOUND TO BE ACCEPTABLE WITH NO EXCEPTIONS. DEFERRED SUBMITTALS: - FIRE SPRINKLER - FIRE/SMOKE ALARM BUILDING CODE SUMMARY PROJECT LOCATION OCCUPANCY TYPE: PROJECT DESCRIPTION: B A-3 TENANT IMPROVEMENT OF EXISTING SPACE. BUSINESS, OFFICE SPACE ASSEMBLY CONSTRUCTION TYPE: II-B STORIES: 2 WITH BASEMENT TOTAL BUILDING AREA: 38,645 SF AREA OF TI: 2,655 SF 333 Broadalbin St SW, Albany, OR 97321 FINISH: 1. ALL FINISHES SHALL BE IDENTIFIED BY OWNER, INDLUCING CABINETS, DOORS, FINISH TRIM, ETC. 2. DOORS & WINDOWS TO BE WEATHER STRIPPED. 3. ALL WINDOWS TO BE INSULATED GLASS (DOUBLE GLAZED). ARCHITECT: O F ORE Albany City Hall - IT Department ELECTRICAL: 1. GROUND FAULT CIRCUIT PROTECTION REQ'D ON ALL 110 VOLT SINGLE PHASE 15 & 20 AMP OUTLETS IN BATHROOMS, OUTDOORS, WITHIN 6 FEET OF SINKS, & ABOVE COUNTER TOPS. 2. MARK ALL OUTLET LOCATIONS FOR REVIEW & APPROVAL BY OWNER PRIOR TO INSTALLATION. 3. LOCATE THE MIDDLE OF ALL OUTLETS AT 18" A.F.F U.O.N. 333 BROADALBIN ST. SW ALBANY, OR 97321 Commercial Building Remodel BUILDING ENVELOPE: 1. ALL OPENINGS, FLASHINGS, COUNTER FLASHINGS, AND EXPANSION JOINTS SHALL BE WATERTIGHT. 2. ALL OPEN JOINTS, PENETRATIONS, AND OTHER OPENINGS IN THE BUILDING ENVELOPE SHALL BE SEALED, CAULKED, GASKETED, OR WEATHER STRIPPED TO LIMIT AIR LEAKAGE. 3. USE ACOUSTICAL SEALANT AROUND ALL PIPES, DUCTS, CONDUIT, OUTLETS, SWITCHES, ETC. ON BOTH SIDES OF CROSSING/PENETRATING WALLS WITH THERMAL AND ACOUSTICAL INSULATION. 4. ALL SAW CUTTING AND CORING LOCATIONS SHALL BE REVIEWED AND COORDINATED WITH THE LANDLORD PRIOR TO CUTTING/CORING. 5. ALL FLASHING SHALL BE 24 GA. PREFINISHED METAL. GRAVEL STOPS AND BEAM CAPS TO BE 22 GA. PREFINISHED METAL. 6. EXPOSED EXTERIOR PLYWOOD SHALL BE EXTERIOR GRADE CDX. EXTERIOR WALLS SHALL BE SHEATHED ENTIRELY PER PLANS. 7. ALL DIMENSIONAL LUMBER TO BE DOUGLAS FIR-LARCH, STANDARD OR BETTER. 8. VAPOR BARRIER REQUIREMENTS: EXTERIOR WALLS: ONE-PERM REQUIRED, FACED INSULATION-TYP. FLOORS: ONE-PERM REQUIRED, FACED INSULATION BELOW FLOOR OR KRAFTER PAPER BETWEEN DECKING AND UNDERLAYMENT. CEILINGS: (NO REQUIREMENT FOR CEILINGS WIHTOUT ATTICS ABOVE THEM) 0.5 PERM REQUIRED IN CEILINGS WITHOUT ATTICS ABOVE (SUCH AS SINGLE RAFTER VAULTS), POLYETHYLENE SHEETS OR FOIL FACED BATTS. SITE ADDRESS: ALBANY, OREGON 6654 ST ALBANY CITY HALL IT DEPARTMENT GENERAL: 1. ALL WORK SHALL COMPLY WITH APPLICABLE CODES & ORDINANCES IN FORCE AT THE TIME OF CONSTRUCTION. Sheet Name 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 Sheet Number ON CHRISTINA M. LARSON PROJECT SCOPE: INTERIOR RENOVATION OF EXISTING OFFICE SPACE. MATERIALS: 1. WHEN CONTRACTOR ACCEPTS DELIVERY OF ALL ITEMS NOTES ON PLANS, WHETHER IN CONTRACT OR NOT IN CONTRACT, THEY SHALL BE RESPONSIBLE FOR LOSS AND/OR DAMAGE TO THESE ITEMS. 2. GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATION WITH OWNER TO PROVIDE TIMELY ARRIVAL OF ALL MATERIALS, EQUIPMENT, AND OTHER SUCH ITEMS TO BE UTILIZED ON THIS PROJECT (OWNER-PROVIDED OR OTHERWISE). GENERAL CONTRACTOR SHALL NOTIFY OWNER IN WRITING WITHIN 5 DAYS OF DATE OF APPROVED WORK AUTHORIZATION OF THOSE ITEMS THAT MAY NOT BE READILY AVAILABLE. IF NOTIFICATIONS ARE NOT PROVIDED TO THE OWNER, THE CONTRACTOR ACCEPTS RESPONSIBILITY FOR THE PROPER ORDERING AND FOLLOW-UP OF SPECIFIED ITEMS AND WILL PURSUE WHATEVER MEANS NECESSARY AT NO ADDITIONAL COST TO OWNER. 3. CONTRACTOR TO ENSURE AVAILABILITY OF ALL SPECIFIED ITEMS SO AS NOT TO CREATE A HARDSHIP TO THE OWNER AND NOT DELAY PROGRESS OF THE WORK. NO EXTENSION OF TIME SHALL BE PERMITTED. 4. CONTRACTOR SHALL BE RESPONSIBLE TO RECEIVE, INVENTORY, STORE, AND SECURE ANY OWNER FURNITURE ITEMS (O.F.I.) SUPPLIED AND DELIVERED TO THE JOBSITE OR OTHER AGREED UPON LOCATION, AND FORWARD THE RECEIVING DOCUMENT(S) TO THE OWNER. 5. THE CONTRACTOR SHALL LEAVE WITH OWNER ONE (1) GALLON OF PAINT OF EACH COLOR FOR FUTURE TOUCH-UP WORK. 6. NO SUBSTITUTIONS OF ANY MATERIALS OR ITEMS SPECIFIED IN THE DOCUMENTS ARE PERMITTED U.O.N. AND APPROVED BY THE OWNER. 7. WHERE NO SPECIFIC STANDARDS ARE APPLIED TO A MATERIAL OR METHOD OF CONSTRUCTION TO BE USED ON THE WORK, ALL SUCH MATERIALS AND METHODS ARE TO MAINTAIN STANDARDS OF THE INDUSTRY. 8. PROVIDE ALL NECESSARY ANCHORAGE BLOCKING, BACKING, FRAMING FOR DOOR STOPS, CASEWORK, SHELVING, MIRRORS, WALL MOUNTED EQUIPMENT, AND ALL OTHER ITEMS AS REQUIRED FOR COMPLETE INSTALLATION. ERED ARCH CT ITE REGIS T GENERAL NOTES Issue: CD SET Date: 06/30/17 Revision: Date: FIRE SPRINKLERS: EXISTING BUILDING REQUIREMENTS: 1. DOOR WIDTH 2. MAXIMUM TRAVEL DISTANCE SEE EGRESS PLAN 200'-0" SECTION 1010.1.1 TABLE 1017.2 COVER SHEET A0.00

REGIS T ALBANY, OREGON 6654 A TE ON ST BUILDING IS FULLY SPRINKLERED. BUILDING IS EQUIPPED WITH A VISUAL STROBE SYSTEM. EMERGENCY EGRESS LIGHTING FOR THE EGRESS PATH IN ALL PUBLIC AND OFFICE SPACES IN IN PLACE. MINIMUM INTESNITY SHALL NOT BE LESS THAN 1 FOOTCANDLE AT FLOOR LEVEL ALONG THE ENTIRE LENGTH OF THE PATH. CONNECT TO BUILDING ELECTRICAL SYSTEM BUILDING EXIT SIGNAGE TO REMAIN. 5. CT ITE CHRISTINA M. LARSON EXISTING BUILDING NOTES 1. 2. 3. 4. ERED ARCH O F ORE G OCCUPANT LOAD OCCUPANCY CLASSIFICATION 8 9 10 11 A ASSEMBY B BUSINESS AREAS OCCUPANT LOAD FACTOR 15 net 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 7 PER OSSC TABLE 1004.1.2 100 gross SYMBOLS LEGEND: TOTAL OFFICE AREA: 2,359 SF OCCUPANT LOAD FACTOR PER TABLE 1004.1.2 100 GROSS TOTAL OCCUPANT LOAD: 24 NEW DOOR 1 A101 SIM DETAIL TAG EXISTING DOOR G 1 DOOR TO BE DEMOLISHED OFFICE 210 110 SF OFFICE 209 104 SF OFFICE 208 118 SF OFFICE 211 116 SF OFFICE 207 199 SF SIM A101 WINDOW TAG NEW WALL 1t EXISTING WALL 1i ILLUMINATE EXIT SIGN SPOT ELEVATION 106 FT TRAVEL DISTANCE WALL TYPE TAG CENTER LINE WALL TO BE DEMOLISHED EXIT SECTION/ ELEVATION TAG 101 0 DOOR TAG GRID BUBBLE DATA OUTLET POWER OUTLET 2-HR RATED WALL FIRE EXTINGUISHER CABINET F FEC 44 75'-0" ALTERNATE TRAVEL DISTANCE PATH 75'-0" FEC EXIT * STARTING POINT FOR TRAVEL DISTANCE TRAVEL DISTANCE PATH EXIT EXIT TO PUBLIC WAY 20 CUMULATIVE ROOM OCCUPANT LOAD & EGRESS DIRECTION IT TRAINING 204A 258 SF ### PANIC HDW DOOR SHALL HAVE PANIC CRASH BAR 1-HR RATED CORRIDOR EXTENT OF ROOM OCCUPANT LOAD 20 OFFICE 204B 94 SF OFFICE 205 198 SF * E NOTE: WITH TOTAL OCCUPANT LOAD OF 44, ONE EXIT IS ACCEPTABLE ASSEMBLY SPACE: TRAINING ROOM OCCUPANCY TYPE: ASSEMBLY: UNCONCENTRATED OCCUPANCY FACTOR: 15 Issue: CD SET Date: 06/30/17 Revision: OCCUPANCY LOAD: 20 1 333 Broadalbin St SW, Albany, OR 97321 OFFICE 206 136 SF Albany City Hall - IT Department 1-HR RATED WALL Commercial Building Remodel EGRESS SYMBOLS LEGEND KITCHENETTE 203A 89 SF Date: AREA OF WORK SECOND FLOOR IT DEPARTMENT - CODE FLOOR PLAN 1/4" 1'-0" CODE SHEET 2ND FLOOR KEY PLAN - EXITS A0.01

REGIS T ON 48" MAX. 48" MAX. 15" ADJUSTABLE MIN. RANGE G (b) X WHERE FIXED OR BUILT-IN STORAGE FACILITIES SUCH AS CABINETS, SHELVES AND DRAWERS ARE PROVIDED IN ACCESSIBLE SPACES, AT LEAST ONE OF EACH TYPE PROVIDED SHALL CONTAIN STORAGE SPACE COMPLYING WITH SECTION 1109.17 42" MIN. TURNS AROUND 1109.17 STORAGE, SHELVING AND DISPLAY UNITS. 1109.17.1- STORAGE, SHELVING AND DISPLAY UNITS SHALL HAVE A CLEAR FLOOR SPACE NOT LESS THAN 30 INCHES BY 48 INCHES THAT ALLOWS EITHER A FORWARD OR PARALLEL APPROACH (SEE ADAAG FIGURE 38) 1109.17.2- WHERE REQUIRED TO BE ACCESSIBLE, AT LEAST ONE OF EACH TYPE OF STORAGE, SHELVING AND DISPLAY UNITS PROVIDED SHALL BE WITHIN THE REACH RANGES SPECIFIED IN SECTION 1109.2.3.5 OR 1109.2.3.6. CLOTHES RODS SHALL BE NOT MORE THAN 48 INCHES ABOVE THE FLOOR. AN OBSTRUCTION GENERAL ACCESSIBLE ROUTES SHALL BE DESIGNED AND CONSTRUCTED ACCORDING TO THIS SECTION. RAMPS IN AN ACCESSIBLE ROUTE SHALL COMPLY WITH SECTION 1109.7. DOOR IN AN ACCESSIBLE ROUTE SHALL COMPLY WITH SECTION 1109.9. PROTRUDING OBJECTS ALONG AN ACCESSIBLE ROUTE SHALL COMPLY WITH SECTION 1109.5. FLOOR COVERINGS AND SURFACE TREATMENTS OF AN ACCESSIBLE ROUTE SHALL COMPLY WITH SECTION 1109.6 5 ACCESSIBLE ROUTE 1 1" 1'-0" 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 CONVENIENCE OUTLETS STORAGE 1" 1'-0" 5'-0" 1'-0" 30" 10" 5'-0" 3'-0" 5'-0" MIN. 34" MAX. 9" MIN. 1'-0" 3'-0" 5'-0" MIN. 30" 24" MAX. 46" MAX. 54" MAX. 10" MAX. 30" MAX. 6 (a) CLEAR FLOOR SPACE (b) HIGH AND LOW (c) MAXIMUM SIDE REACH PARALLEL APPROACH SIDE REACH LIMITS OVER OBSTRUCTION SIDE REACH 2 1" 1'-0" 60" DIAMETER ALTERNATE CIRCULAR TURNING SPACE T-SHAPED TURNING SPACE WHEELCHAIR TURNING SPACE 1/4" 1'-0" FREESTANDING OBJECTS MOUNTED ON POSTS OR PYLONS MAY OVERHANG 12" MAX. FROM 27" TO 80" A.F.F. DOOR CLEAR AREA 1/4" MAX. THE DOOR SHALL SWING TO THE FULLY OPEN POSITION WHEN AN OPENING FORCE NOT TO EXCEED 5LBS. (EXTERIOR DOORS), 5 LBS. (INTERIOR DOORS) & 15 LBS. (FIRE DOORS) IS APPLIED TO THE LATCH SIDE. THRESHOLD 1/4" MAX. FINISH FLOOR HARDWARE 3 VERTICAL CLEARANCES 1/2" 1'-0" DOOR CLEAR AREA 1/4" 1'-0" 30" MIN. (a) HIGH FORWARD REACH LIMIT 'X' 0"-20" ITEMS WITHIN DASHED LINES ARE WITHIN REACH 15" MAX. Issue: CD SET Date: 06/30/17 30" 6" 12" 48" 30" CLEAR FLOOR OR GROUND SPACE SHALL EXTEND NO MORE THAN 25 IN. (635 M.M.) UNDER THE OBSTRUCTION. Revision: (c) CLEAR FLOOR SPACE THE MINIMUM CLEAR FLOOR SPACE REQUIRED TO ACCOMMODATE A SINGLE STATIONARY WHEELCHAIR AND OCCUPANT SHALL BE NOT LESS THAN 30 INCHES WIDE BY 48 INCHES LONG. WHERE THE CLEAR FLOOR SPACE IS LOCATED IN AN ALCOVE MORE THAN 24 INCHES DEEP AND A WHEELCHAIR USER MUST MAKE A FORWARD APPROACH, THE WIDTH OF THE CLEAR FLOOR SPACE SHALL BE INCREASED TO A MINIMUM OF 36 INCHES. WHERE THE CLEAR FLOOR SPACE IS LOCATED IN AN ALCOVE MORE THAN 15 INCHES DEEP AND THE WHEELCHAIR USER MUST MAKE A PARALLEL APPROACH, THE LENGTH OF TEH CLEAR FLOOR SPACE SHALL BE INCREASED TO A MINIMUM OF 60 INCHES. Z 48" ACCESSIBLE DETAILS (b) MAXIMUM FORWARD REACH OVER AN OBSTRUCTION 8 FORWARD REACH 1" 1'-0" Date: (b) ADDITIONAL MANUEVERING CLEARANCE FOR ALCOVES 'X' 'Z' 'X' OR GREATER 48" 24" MAX. 30" 30" 'X' 20"-25" 48" (a) CLEAR FLOOR SPACE IN ALCOVES 48" 48" NOTE: 'X' REACH DEPTH, 'Y' REACH HEIGHT, 'Z' CLEAR KNEE SPACE, 'Z' IS THE CLEAR SPACE BELOW THE OBSTRUCTION, WHICH SHALL BE AT LEAST AS DEEP AS THE REACH DISTANCE 'X'. 24" 30" 48" 48" MIN. 15" 7 OBJECTS PROJECTING FROM WALL LESS THAN 27" ABOVE FINISHED FLOOR MAY PROTRUDE ANY AMOUNT FLOOR SURFACE SHALL BE SLIP RESISTANT AND LEVEL WITH MAX. 1/4" CHANGE IN LEVEL 2'-3" LEVER (NO TWISTING OF WRIST) 3'-0" ACCESSIBLE ROUTE 333 Broadalbin St SW, Albany, OR 97321 60" MIN. CLR. 18" MIN. INT. 24" MIN. EXT. Albany City Hall - IT Department 4" 32" MIN. CLR. 12" MIN. OBJECTS PROJECTING FROM WALL BETWEEN 27" AND 80" ABOVE FINISHED FLOOR SHALL PROTRUDE NO MORE THAN 4" Commercial Building Remodel 44" MIN. (48" MIN.) LATCH & CLOSER 12" MIN. FOR DOORS WITH LATCH & CLOSER 6'-8" MIN. CLR. 48" MIN. CLR. 18" MIN. 'Y' 48" 3/8" 1'-0" 42" MIN. WIDTH OF ACCESSIBLE ROUTE 'Y' 44" 15" MIN ACCESSORY REACH HEIGHTS 36" MIN. 90 DEG. TURN 48" 9 48" MAX. WINDOW OPERATORS THERMOSTATS 48" MIN. 48" 15" MIN. 5. (a) PULL CORDS 36" MIN. 4. O F ORE STORAGE SHELVES AND CLOSETS 36" MIN. SWITCHES ALBANY, OREGON 6654 TE A 3. NOTE: THE FIXTURES & ACCESSORIES SHOWN HEREIN ARE NOT NECESSARILY INCLUDED IN THIS PROJECT. REFER TO PLANS & SPECIFICATIONS FOR FIXTURE OR ACCESSORY TYPE & LOCATIONS CHRISTINA M. LARSON ST 2. THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT AND NO PART THEREOF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONNECTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH THESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSION. CONTRACTOR SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. SHOP DETAILS MUST BE SUBMITTED TO THIS OFFICE FOR APPROVAL BEFORE PROCEEDING WITH FABRICATION. ALL DETAILS SHOWN ON THIS SHEET ARE TYPICAL FOR ACCESSIBLE FIXTURES AND EQUIPMENT AS DESCRIBED IN THE CONSTRUCTION DOCUMENTS. ITEMS SHOWN ON THIS SHEET THAT ARE NOT INCLUDED IN THE ARCHITECTURAL DOCUMENTS SHALL BE DISREGARDED. INFORMATION ON THE DOCUMENTS THAT IS MORE SPECIFIC TO INDIVIDUAL CONDITIONS SUPERSEDES THE INFORMATION SHOWN ON THIS SHEET. ERED ARCH CT ITE 1. 36" MIN. GENERAL ACCESSIBILITY NOTES: 48" MIN. NOTE: DIMENSIONS SHOWN APPLY WHEN 'X' 48 IN. 4 WHEELCHAIR ALCOVES 1" 1'-0" A0.02

10 1 11' - 6" 10' - 8 1/2" 12' - 4 1/2" 13' - 4" A9.00 1 1/2" 60" 36" 20" 3 EQUAL W4 W1 DAVID MIKE H. JORGE 09-05 4' - 11 3/4" 1' - 6" 2' - 0" 02-03 06-01 09-01 3' - 10" 09-02 7' - 6" 5' - 7" 6' - 6" KITCHENETTE 203A 89 SF GFI 8' - 6" 8' - 2" 4' - 1" 09-03 ON 20" BASE 3 EQUAL - 3 --- A9.00 INTERIOR ELEVATION - CONFERENCE ROOM 1/4" 1'-0" DAVE 9' - 6" PETE B. 36" 8' - 6" OFFICE 206 136 SF RICHARD 6' - 0" 10' - 5" 15' - 0 1/2" A2.01 GFI 7' - 4" 1A 60" FILLER 1 1/2" 1 GFI W4 02-02 OPEN OFFICE 204 578 SF 25 1/2" SEAN REF 12" OFFICE 207 199 SF RIM OF SINK OFFICE 208 118 SF 15' - 1" MICHAEL OFFICE 209 104 SF 34" TO TOP 18" 9' - 8 1/2" 4 A2.01 OFFICE 210 110 SF 4' - 6" 15' - 0 1/2" 30" G 24" FILLER OFFICE 211 116 SF G 11 35' - 5" 12' - 2" O F ORE 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 9 ALBANY, OREGON 6654 TE A 8 REMOVE ALL EXISTING BASEBOARD REMOVE ALL EXISTING CARPET REMOVE EXISTING WALL REMOVE EXISTING DOOR REMOVE EXISTING SHELVING REMOVE PART OF WALL FOR FUTURE OPENING NEW BASEBOARD THROUGHOUT NEW CP-1 CARPET THROUGHOUT NEW P-1 PAINT THROUGHOUT NEW ACOUSTIC TILE IN AREA FRAMED OPENING, DRYWALL FINISH, HEIGHT TO MATCH DOOR FRAME OF (E) DOORS NEW 36" TALL CUBICLE PANEL ST 7 CHRISTINA M. LARSON KEYNOTE DESCRIPTION 02-02 02-03 02-06 02-07 02-08 02-09 06-01 09-01 09-02 09-03 09-05 10-02 ERED ARCH CT ITE KEY VALUE REGIS T KEYNOTE LEGEND 02-06 02-07 W2 2' - 8" RUSS 02-07 02-09 OFFICE 204B 94 SF MATT 4 STORAGE ROOM DEMO FLOOR PLAN 1/4" 1'-0" 333 Broadalbin St SW, Albany, OR 97321 1' - 0" OFFICE 205 198 SF 15' - 0" IT TRAINING 204A 258 SF 204B W2 W1 9' - 0 1/4" W3 6' - 8 1/4" W2 PLOTTER AREA 02-02 02-03 02-08 Albany City Hall - IT Department 02-06 204A 6' - 8" 11' - 11 5/8" 3' - 11" RECEPTION 203 316 SF 5' - 0" 10' - 10 1/2" 10-02 Commercial Building Remodel F E 1' - 5" 32' - 4" 2 14' - 0" 9' - 2 1/8" 25' - 0" Issue: CD SET Date: 06/30/17 Revision: 13' - 4" Date: AREA OF WORK SECOND FLOOR IT DEPARTMENT - FLOOR PLAN 1/4" 1'-0" FLOOR PLAN 2ND FLOOR KEY PLAN A2.01

IT TRAINING OFFICE 3' - 0" 3' - 0" Door Type Height 7' - 0" 7' - 0" (1) LAYER 5/8" GYP. BOARD, EA. SIDE DOOR SCHEDULE GENERAL NOTES: 3-5/8" METAL STUDS 1. B A SCWD SCWD Frame Type Finish STAIN STAIN A A Frame Material HM HM Frame Finish PAINT PAINT Hardware Group 1 1 Fire Rating Door Details Door Notes TE NR NR Number Name 203 203A 204 204A 204B 205 206 207 208 209 210 211 NON-RATED, NONBEARING, INTERIOR PARTITION 1 1/2" 1'-0" FASTEN TOP PLATE TO STRUCTURE USING SIMPSON DEFLECTION CLIPS STC OR DTC AS REQ'D. LADDER FRAMING WILL BE USED WHERE WALLS PARALLEL THE TRUSSES O F ORE G RECEPTION KITCHENETTE OPEN OFFICE IT TRAINING OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE OFFICE Floor Finish CP CP CP CP CP CP CP CP CP CP CP CP Base Finish RB RB RP RB RB RB RB RB RB RB RB RB Wall Finish PAINT PAINT PAINT PAINT PAINT PAINT PAINT PAINT PAINT PAINT PAINT PAINT Ceiling Finish EXISTING EXISTING ACT ACT ACT EXISTING EXISTING EXISTING EXISTING EXISTING EXISTING EXISTING 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 FINISH SCHEDULE FIN. FLOOR AND BASE ALBANY, OREGON 6654 ALL OPENINGS TO BE 7'-0" HIGH X 3'-6" WIDE SOUND ATTENUATION BLANKET 3-1/2" UNFACED FIBERGLASS (IF DESIRED) W1 - INT. NON-RATED WALL Door Material A 204A 204B Width ST CEILING PER REFLECTED CEILING PLANS Location CHRISTINA M. LARSON ON Mark W1 REGIS T 0' - 6" DOOR SCHEDULE CT ITE BRACE TO STRUCTURE AS REQ'D ERED ARCH Notes ACOUSTIC INSULATION ABOVE TILES NOTE: NEW CARPET AND FINISHES TO BE SELECTED BY TENANT ACOUSTIC SEALANT BOTH SIDES (1) LAYER 5/8" GYP. BOARD (2) LAYER 5/8" GYP. BOARD 3-5/8" METAL STUDS SOUND ATTENUATION BLANKET 3-1/2" UNFACED FIBERGLASS (IF DESIRED) ACOUSTIC SEALANT EA. SIDE BOTTOM PLATE FIN. FLOOR AND BASE W2 W2 - 2 x 4 INT. SOUND WALL 1 1/2" 1'-0" WINDOW & DOOR KEY DOOR HARDWARE TYPES FINISH KEY HM SCWD KDHM WD FF FP HC AL NR T R.O. GROUP 1: 3 EA. HINGES 1 EA. OFFICE LOCKSET 1 EA. WALL STOP 3 EA. SILENCERS CP: RB: ACT: - HOLLOW METAL SOLID CORE WOOD DOOR KNOCK DOWN METAL WOOD FACTORY FINISH FACTORY PRIMED, FIELD PAINTED HOLLOW CORE ALUMINIM NON-RATED TEMPERED ROUGH OPENING CARPET RUBBER BASE ACOUSTIC CEILING TILE NON-RATED, NONBEARING, INTERIOR PARTITION DOOR TYPES APPROXIMATE STC RATING: 50-54 FRAME TYPES TEMPERED GLASS 1/2" PAINTED MDF W/ 1/16" RADIUS EASE 36" A.F.F. U.O.N. (1) LAYER 5/8" GYP. BD. EACH SIDE A B A BOTTOM PLATE FIN. FLOOR AND BASE W3 W3 - INT. PARTIAL WALL 333 Broadalbin St SW, Albany, OR 97321 T Albany City Hall - IT Department 2x DOUBLE TOP PLATE 1 1/4" X 3 5/8" LIGHT GAUGE METAL STUDS @ 16" O.C. (WIDTH TO MATCH ADJACENT WALL TYPE) Commercial Building Remodel FRYREGLET "Z" REVEAL MOLDING (DRMZ-625-375) NON-RATED, NONBEARING, INTERIOR PARTITION 1 1/2" 1'-0" Issue: CD SET Date: 06/30/17 0' - 6" Revision: Date: BRACE TO STRUCTURE AS REQ'D WALL ASSEMBLY PER WALL TYPES STEEL STUD HEADER CEILING PER REFLECTED CEILING PLANS WALL ASSEMBLY PER WALL TYPE HOLLOW METAL DOOR FRAME HOLLOW METAL DOOR FRAME 3-5/8" METAL STUD (1) LAYER 5/8" GYP. BOARD, EA. SIDE SCHEDULES 3-5/8" METAL STUDS SOUND ATTENUATION BLANKET 3-1/2" UNFACED FIBERGLASS (IF DESIRED) FIN. FLOOR AND BASE 4 W4 - INT. FURRING WALL 1 1/2" 1'-0" NON-RATED, NONBEARING, INTERIOR PARTITION 2 DETAIL - DOOR JAMB, TYP. 3" 1'-0" 1 DETAIL - DOOR HEAD, TYP. 3" 1'-0" A4.01

REGIS T CT ITE KEYNOTE LEGEND ERED ARCH 9 10 O F ORE G 231 SW 2nd Ave. Albany, Oregon 97321 Ph: 541.497.2954 / Fx: 541.926.4358 8 ALBANY, OREGON 6654 TE A 7 REMOVE LIGHT FIXTURE FOR REUSE REMOVE ACOUSTIC CEILING TILE IN THIS AREA ST 02-01 02-04 KEYNOTE DESCRIPTION ON CHRISTINA M. LARSON KEY VALUE 11 G 9' - 0" 02-01 02-01 02-01 02-04 02-01 E 2 SECOND FLOOR IT DEPARTMENT - RCP - DEMO 333 Broadalb

5. do not scale the drawings. written dimensions take precedence over scaled drawings. 6. larger scale detailing shall take precedence over smaller scale -- verify with architect. 7. architecture drawings take precedence over other drawings for layout, dimensions, and number of items provided. upon discrepencies between architectural drawings and