Gage Block - Action Industrial Supply

1y ago
8 Views
2 Downloads
1.17 MB
23 Pages
Last View : 15d ago
Last Download : 6m ago
Upload by : Aiyana Dorn
Transcription

Gage Block Selecting Gage Blocks SERIES 516 FEATURES Precision gage blocks are the primary standards vital to dimensional quality control in the manufacture of parts. Mitutoyo offers a complete selection of gage blocks available in a choice of rectangular or square, metric or inch and steel or CERA (ceramic) types. Accuracy Mitutoyo gage blocks guarantee such a high accuracy that users can use them without anxiety. Mitutoyo has established a traceability system for our measurement products, up to the Metrology Management Center of the National Institute of Advanced Industrial Science and Technology (AIST), and we have been certified by the Japanese government as an accredited laboratory. Select gage blocks in accordance with the combination range required. If a large length is required, add a long block set. Select gage blocks in accordance with the minimum length step required. Add wear block sets if necessary. If a set containing a large number of gage blocks is selected, the number of combination gage blocks required for a length is reduced and the number of combinations is increased. The accuracy will be retained and damage will be reduced. The specific gage block set for micrometer inspection and caliper inspection is available. If using only one length repeatedly, it is a good idea to purchase discrete gage blocks. The 2mm-based gage blocks, which take the base of the minimum length step as 2mm, are easy to handle and will not warp, as compared to the 1mm-based gage blocks. Wringing The lapping technique is one of Mitutoyo’s specialties. Our advanced lapping technique, developed for more than a half century, allows us to achieve the best flatness and surface roughness needed for gage blocks. Abrasion Resistance and Dimensional Stability High-carbon, high-chrome steel is employed to sufficiently satisfy a variety of material characteristics required for gage blocks. A high degree of hardness, obtained by our heat treatment technology, as well as methodically repeated heat treatment, have successfully reduced deterioration change over time. CERA Blocks Rectangular Block Gage Size Up to 2” Over .2” up to 40” Up to 10mm Over 10mm up to 1000mm Face Width (A) 1.181” 1.378” 30mm 35mm Face Depth (B) .355” .355” 9mm 9mm Gage Size Face Width (C) Inch (up to 40”) .95” Metric (up to 1000mm) 24.1mm Face Depth (D) .95” 24.1mm CERA blocks, made of ceramic materials with superior surface quality, were developed by Mitutoyo’s ultra-precision machining techniques and solve problems commonly associated with steel gage blocks. LÀ Ã Ê Ãà 1. Corrosion-Resistant Anti-corrosion treatment is not required when handled normally (i.e. with fingers), resulting in simple maintenance and storage. 2. No Burrs Caused by Dents, etc. Since the CERA Block is very hard it will not scratch and is highly resistant to burrs. If a burr is formed, it can easily be removed with a ,ià ÃÌ ViÊÌ ÊÜi À ceramic deburring stone (Ceraston). 3. Abrasion Resistant ä { CERA Blocks have 10 times the abrasion resistance of steel gage blocks. ä Ó 4. Dimensional Stability CERA Blocks are free from dimensional ä change over time. Óäää {äää 5. Marking The black characters, indicating the nominal length, are inscribed by laser and are clearly visible against the white surface of the block. E-2 Square Block -Ìii - V Ê ÌÀ i /Õ }ÃÌi Ê V ÀL i , Ê V Èäää näää Õ ÌÊ vÊÌÀ Ûi Ê

Grade and Application Refer to the following table to select the gage block grade according to usage. Applications Workshop use Mounting tools and cutters Manufacturing gages Calibrating instruments Inspection use Inspecting mechanical parts, tools, etc. Checking the accuracy of gages Calibrating instruments Calibration use Checking the accuracy of gage blocks for workshop Checking the accuracy of gage blocks for inspection Checking the accuracy of instruments Reference use Checking the accuracy of gage blocks for calibration For academic research Grade AS-1 or AS-2 0 or AS-1 0 or AS-1 00 or 0 K or 00 K Grade AS-1: These gage blocks are intended for shop-floor use to set and calibrate fixtures, as well as precision instruments. Grade 0: This grade is used within an inspection area to verify the accuracy of plug and snap gages, as well as for setting electronic measuring devices. Grade 00: These higher accuracy gages are intended for use within a controlled environment by skilled inspection staff. Mainly used as reference standards for setting high-precision measuring equipment and for the calibration of lower grade gage blocks. Grade K: Gage blocks of this accuracy are intended for use within a temperature-controlled inspection room or calibration laboratory. They should be used as masters with certificates against other gage blocks which are calibrated by comparison. Combination of a Required Length Multiple combinations of gage blocks can be used to make a required length. Care should be exercised in the following points. 1. Use as few gage blocks as possible to obtain the required length. (Select thick gage blocks whenever possible.) 2. Select gage blocks starting with the one that has the least significant digit required, and then work up to ones with more significant digits. 3. There are multiple combinations for the integer part of a length. To prevent wear as much as possible, do not always use the same gage blocks. Example combination Required length 45.6785mm For the 1mm-based gage block set (112 pcs.) 1.0005 1.008 1.17 17.5 25 45.6785mm For the 2mm-based gage block set (112 pcs.) 2.0005 2.008 2.17 14.5 25 45.6785mm 6. Anti-magnetic Nature Keeps Away Steel Powders 7. High Wringing Force An even, dense tissue can maintain a strong wringing force. 8. Material of CERA block Material Property Hardness (HV) Coefficient of thermal expansion (10-6/K) Flexural strength by 3-point bending (MPa) Fracture toughness K1c (MPa m1/2) Young’s Modulus x104 (MPa) Poisson’s Ratio Specific gravity Thermal conductivity (W/m k) CERA Block (ZrO2) 1350 9.3 0.5 1270 7 20.6 0.3 6.0 2.9 9. Closest Expansion Coefficient to Steel The thermal expansion coefficient of a CERA Block is similar to that of a steel gage block. 10. Highly Resistant Against Drops and Other Shocks The CERA block material is one of the toughest ceramics materials. It is extremely difficult to crack under normal use. Steel (Fe) 800 10.8 0.5 1960 120 20.6 0.3 7.8 54.4 Carbide (WC-Co) 1650 5.5 1.0 1960 12 61.8 0.2 14.8 79.5 vviÀi ViÊ Ê i Ã Ê Î Silicon nitride (Si3N4) 1500 2 580 6.5 28.4 0.3 3.2 16.7 - V Ê ÌÀ i Ó /Õ }ÃÌi ÊV ÀL i Ç n , Ê V Óä Ó Î Features of Square Gage Blocks 1. Perfect wringing is possible using the center hole. After wringing the square gage blocks, an optional tie rod can be inserted through the center hole to fix the blocks using a screw. 2. A height reference standard can easily be made. A precision height reference standard can be made easily and inexpensively using accessories such as the plain jaw and block base. 3. A dedicated inspection jig can be easily made. A dedicated inspection jig for periodic inspection of instruments can be made easily and inexpensively. 4. A wide measuring surface with cross section dimensions of [24.1 x 24.1mm / .95 x .95”] is available. A square gage block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers. Long and Ultra-Thin Gage Blocks Mitutoyo offers extra thin gage blocks from 0.10 mm to 0.99 mm (increments of 0.01 mm), as well as long gage blocks up to 1,000 mm as standard products. E-3 Ó ÓÓ ÓÎ /i «iÀ ÌÕÀiÊ vviÀi ViÃÊ ÊÌ iÊ i à ÊLiÌÜii Ê Ã iÊ ÌiÀ ÃÊ ÊÃÌii ÊÌ ÌÊ ÀiÊ LÌ i ÊÜ i Ê i ÃÕÀ }ÊÌiÃÌ« iViÃÊÜ Ì Ê i }Ì Ê vÊ ää Ê ÌÊi V ÊÌi «iÀ ÌÕÀi

Gage Block SERIES 516 Accuracies of Mitutoyo Gage Blocks All Mitutoyo gage blocks meet or exceed all known specifications. The flatness, parallelism and surface finish necessary to achieve the required accuracies are the same as or better than government requirements. ASME (American Society of Mechanical Engineers) Deviations and Tolerance on Length for Metric and inch Gage Blocks: ASME B89.1.9-2002 (USA) Calibration Grade K Grade 00 Grade 0 Grade AS-1 Grade AS-2 Limit Limit Limit Limit Limit Nominal Deviations Deviations Deviations Deviations Deviations Length Range of Length Tolerance for of Length Tolerance for of Length Tolerance for of Length Tolerance for of Length Tolerance for l n in inches at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation From Nominal In Length From Nominal In Length From Nominal In Length From Nominal In Length From Nominal In Length tv µin. tv µin. tv µin. tv µin. Length Length Length Length Length tv µin. te µin. te µin. te µin. te µin. te µin. ln .05 .05 ln .4 .45 ln 1 1 ln 2 2 ln 3 3 ln 4 4 ln 5 5 ln 6 6 ln 7 7 ln 8 8 ln 10 10 ln 12 12 ln 16 16 ln 20 20 ln 24 24 ln 28 28 ln 32 32 ln 36 36 ln 40 12 10 12 16 20 24 32 32 40 40 48 56 72 88 104 120 136 152 160 2 2 2 2 2 3 3 3 4 4 4 4 5 6 6 7 8 8 10 Calibration Grade K Nominal Length Range l n in mm ln 0.5 0.5 ln 10 10 ln 25 25 ln 50 50 ln 75 75 ln 100 100 ln 150 150 ln 200 200 ln 250 250 ln 300 300 ln 400 400 ln 500 500 ln 600 600 ln 700 700 ln 800 800 ln 900 900 l n 1000 4 3 3 4 5 6 8 8 10 10 12 14 18 20 25 30 34 38 40 2 2 2 2 3 3 3 3 4 4 4 4 5 6 6 7 8 8 10 6 5 6 8 10 12 16 16 20 20 24 28 36 44 52 60 68 76 80 Grade 00 4 4 4 4 4 5 5 5 6 6 6 7 8 10 10 12 12 14 16 Grade 0 12 8 12 16 20 24 32 32 40 40 48 56 72 88 104 120 136 152 168 6 6 6 6 6 8 8 8 10 10 10 10 12 14 16 18 20 20 24 Grade AS-1 24 18 24 32 40 48 64 64 80 80 104 112 144 176 200 240 260 300 320 0.05 0.05 0.05 0.06 0.06 0.07 0.08 0.09 0.10 0.10 0.12 0.14 0.16 0.18 0.20 0.20 0.25 0.10 0.07 0.07 0.10 0.12 0.15 0.20 0.25 0.30 0.35 0.45 0.50 0.65 0.75 0.85 0.95 1.00 0.05 0.05 0.05 0.06 0.06 0.07 0.08 0.09 0.10 0.10 0.12 0.14 0.16 0.18 0.20 0.20 0.25 0.14 0.12 0.14 0.20 0.25 0.30 0.40 0.50 0.60 0.70 0.90 1.10 1.30 1.50 1.70 1.90 2.00 E-4 0.10 0.10 0.10 0.10 0.12 0.12 0.14 0.16 0.16 0.18 0.20 0.25 0.25 0.30 0.30 0.35 0.40 0.30 0.20 0.30 0.40 0.50 0.60 0.80 1.00 1.20 1.40 1.80 2.20 2.60 3.00 3.40 3.80 4.20 0.16 0.16 0.16 0.18 0.18 0.20 0.20 0.25 0.25 0.25 0.30 0.35 0.40 0.45 0.50 0.50 0.60 A Certificate of Inspection is furnished with all Mitutoyo gage blocks with a serial number on the case and an identification number on each block. The deviation of each block is registered. For this inspection, each gage block is measured relative to the upper level master using a gage block comparator. Grade K gage blocks are manufactured by absolute measurement using an interferometer. The gage block set and discrete gage block are supplied with a Certificate of Calibration. The Certificate of Calibration specifies the deviation from the nominal length. (Comparative measurement, however, is performed for all square gage blocks.) 12 12 12 12 14 14 16 16 16 16 18 20 20 24 28 28 32 36 40 Grade AS-2 Limit Limit Limit Limit Limit Deviations Deviations Deviations Deviations Deviations Tolerance for Tolerance for Tolerance for Tolerance for Tolerance for of Length of Length of Length of Length of Length at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation at any Point the Variation In Length From Nominal In Length From Nominal In Length From Nominal In Length From Nominal From Nominal In Length tv µm tv µm tv µm tv µm tv µm Length Length Length Length Length te µm te µm te µm te µm te µm 0.30 0.20 0.30 0.40 0.50 0.60 0.80 1.00 1.20 1.4 1.80 2.20 2.60 3.00 3.40 3.80 4.20 Mitutoyo Gage Blocks and Inspection Certificates 0.60 0.45 0.60 0.80 1.00 1.20 1.60 2.00 2.40 2.80 3.60 4.40 5.00 6.00 6.50 7.50 8.00 0.30 0.30 0.30 0.30 0.35 0.35 0.40 0.40 0.45 0.50 0.50 0.60 0.70 0.70 0.80 0.90 1.00 A Certificate of Accuracy, traceable to the NIST, is furnished with each gage block set and individual block. Mitutoyo America Corporation Calibration Laboratory: ISO 17025-2005 accredited calibration available Calibration capability up to 1000mm/40" length Low measurement uncertainty Contact Information: 965 Corporate Blvd. Aurora, Illinois 60502 Phone: (888) 648-8869 option 7 Fax: (630) 978-6477

Metric Rectangular Gage Block Set SERIES 516 — 1mm Base Block Set Steel 112-block set Steel 103-block set Steel 47-block set Provided with Inspection Certificate CERA 112-block set CERA 56-block set CERA/Steel combination 47-block set SPECIFICATIONS 1mm Base Block Set Blocks per set 112 103 87 56 47 Order No. Steel 516-531-56 516-937-26 516-938-26 516-939-26 516-940-26 516-533-56 516-941-26 516-942-26 516-943-26 516-944-26 516-535-56 516-945-26 516-946-26 516-947-26 516-948-26 516-536-56 516-953-26 516-954-26 516-955-26 516-956-26 CERA 516-541-56 516-337-26 516-338-26 516-339-26 516-340-26 516-542-56 516-341-26 516-342-26 516-343-26 516-344-26 515-543-56 516-345-26 516-346-26 516-347-26 516-348-26 516-544-56 516-353-26 516-354-26 516-355-26 516-356-26 Grade K 00 0 AS-1 AS-2 K 00 0 AS-1 AS- 2 K 00 0 AS-1 AS- 2 K 00 0 AS-1 AS-2 516-537-56 516-957-26 516-958-26 516-959-26 516-960-26 516-545-56 516-357-26 516-358-26 516-359-26 516-360-26 K 00 0 AS-1 AS-2 Blocks included in set Size 1.0005 1.001 - 1.009 1.01 - 1.49 0.5 - 24.5 25 - 100 1.005 1.01 - 1.49 0.5 - 24.5 25 - 100 1.001 - 1.009 1.01 - 1.49 0.5 - 9.5 10 - 100 0.5 1.001 - 1.009 1.01 - 1.09 1.1 - 1.9 1 - 24 25 - 100 1.005 1.01 - 1.09 1.1 - 1.9 1 - 24 25 - 100 E-5 Step Qty. 0.01 0.5 25 1 9 49 49 4 1 49 49 4 0.001 0.01 0.5 10 9 49 19 10 0.001 0.01 0.5 25 0.001 0.01 0.1 1 25 0.01 0.1 1 25 1 9 9 9 24 4 1 9 9 24 4

Metric Rectangular Gage Block Set SERIES 516 — Long Block Set, Wear Block Set Steel 8-block set CERA 8-block set SPECIFICATIONS Long Block Set Blocks Order No. per set Steel — 8 — 516-115-26 516-116-26 516-540-56 8 516-701-26 516-702-26 516-703-26 CERA 516-547-56 516-164-26 516-165-26 516-166-26 516-546-56 516-731-26 516-732-26 516-733-26 Grade ASME K 00 0 AS-1 K 00 0 AS-1 Blocks included in set Size Step 25-200 25 — — — — — — 25 125 - 175 50 200 - 250 100 300 - 500 CERA 2-block set Carbide 2-block Qty. 8 — — — 3 2 3 7i ÀÊL V xÊ SPECIFICATIONS Wear Block Set Blocks Order No. per set Carbide 516-807-26 2 516-806-26 516-803-26 2 516-802-26 CERA 516-832-26 516-833-26 516-830-26 516-831-26 Grade ASME 0 AS-1 0 AS-1 Blocks included in set Size Qty. 1 2 2 E-6 2 7i À L V Provided with Inspection Certificate

Inch Rectangular Gage Block Set SERIES 516 — Inch Block Set, Thin Block Set, Long Block Set, Wear Block Set SPECIFICATIONS Inch Block Set Blocks per set Provided with Inspection Certificate 81 35 Order No. Steel 516-549-56 516-901-26 516-902-26 516-903-26 516-904-26 516-550-56 516-913-26 516-914-26 516-915-26 516-916-26 Grade CERA 516-557-56 516-301-26 516-302-26 516-303-26 516-304-26 516-558-56 516-313-26 516-314-26 516-315-26 516-316-26 Steel/CERA — — 516-302-27** — — — — — — — K 00 0 AS-1 AS-2 K 00 0 AS-1 AS-2 Blocks included in set Size Step .0001 .1001 – .1009 .001 .101 – .149 .05 .05 – .95 1 1-4 Qty. 9 49 19 4 .10005 .1001 – .1009 .101 – .109 .11 – .19 .1 - .3 .5, 1, 2, 4 1 9 9 9 3 4 ** CERA blocks are adopted for frequently-used blocks. 81-block set: All are CERA blocks, except 2”, 3”, and 4” are steel blocks SPECIFICATIONS Thin Block Set Blocks per set 28 10 Order No. Steel 516-551-56 516-917-26 516-918-26 516-919-26 516-920-26 516-926-26 516-927-26 Grade CERA — — — — — — — K 00 0 AS-1 AS-2 0 AS-1 Blocks included in set Size Step .02005 .0001 .0201 – .0209 .001 .021 – .029 .01 .01 – .09 Qty. 1 9 9 9 .005 - .050 10 .005 SPECIFICATIONS Long Block Set Blocks per set 8 8 Order No. Steel 516-126-26 516-127-26 — — 516-712-26 516-713-26 Grade CERA 516-176-26 516-177-26 516-564-56 516-741-26 516-742-26 516-743-26 0 AS-1 K 00 0 AS-1 Blocks included in set Size Step 1-8 1 Qty. 8 5-7 8, 10, 12 16, 20 3 3 2 1 2 4 SPECIFICATIONS Wear Block Set Blocks per set 2 2 Order No. Carbide 516-809-26 516-808-26 516-805-26 516-804-26 Grade CERA 516-836-26 516-837-26 516-834-26 516-835-26 0 AS-1 0 AS- 1 Blocks included in set Size Qty. .05 2 .1 E-7 2 .0001 .001 .01 .1

Micrometer Inspection Gage Block Sets SERIES 516 Gage blocks for inspecting a variety of micrometers. Can be measured in both vertical and horizontal posture. Parallelism is measured by attaching the optical parallel (optional accessory) to the gage block set. Micro Checker SPECIFICATIONS Metric Order No. Applicable gage block set Applicable gage block size (mm) Inch/Metric Micro Checker (holder only) 516-607 516-106-26, 516-107-26, 516-156-26, 516-157-26 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25 Metric Block Set Blocks Order No. per set Steel 516-103-26 10 516-101-26 516-106-26 10 516-107-26 Inch Block Set Blocks Order No. per set Steel 516-552-56 10 516-921-26 516-922-26 516-923-26 516-529-26* 10 516-554-56 9 516-929-26 516-930-26 516-931-26 — 9 — 516-934-26 516-935-26 * For QuantuMike CERA 516-152-26 516-153-26 516-156-26 516-157-26 Order No. Applicable gage block set Applicable gage block size (inch) Micro Checker (holder only) 516-608 516-921-26, 516-922-26, 516-923-26, 516-321-26, 516-322-26, 516-323-26 .105, .210, .315, .420, .5, .605, .815, .920 Grade Blocks included in set 0 AS- 1 0 AS-1 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20, 25mm 2.5, 5.1, 7.7, 10.3, 12.9, 15, 17.6, 20.2, 22.8, 25mm Optical parallel (t 12mm) Grade CERA 516-559-56 K 516-321-26 00 516-322-26 0 516-323-26 AS-1 516-319-26* 0 Blocks included in set 516-561-56 516-333-26 516-334-26 516-335-26 516-563-56 516-329-26 516-330-26 516-331-26 .0625, .100, .125, .200, .250, .300, .500, 1, 2” Optical parallel (t .5") K 00 0 AS- 1 K 00 0 AS- 1 .105, .210, .315, .420, .500, .605, .710, .815, .920, 1” Optical parallel (t .5") .087, .189, .307, .409, .472, .598, .669, .772, .890, 1" Optical parallel (t .5") .0625, .100, .125, .200, .250, .300, .500, 1, 2” Bore Gage Calibration Kit SERIES 516 SPECIFICATIONS Blocks per set 9 Order No. Carbide 516-120-26 Grade 0 (Gage blocks are optional.) Blocks included in set Size .04”, .08”, .16”, .2”, .4”, .8”, 1”, 2”, 3” 619018 (plain jaw 2 pc. set) and 619004 (160mm holder) E-8 Provided with Inspection Certificate

Individual Metric Rectangular Gage Block FEATURES If using only one length repeatedly, it is good practice to purchase discrete gage blocks. Each gage block is supplied with a Certificate of Inspection. Each Grade K gage block of ASME standard is specially supplied with a Certificate of Calibration, which certificates that the gage block was manufactured via interferometry. Suffix Number for Selecting Standard and Certificate Provided ASME Grade K 00 0 AS-1 AS- 2 SPECIFICATIONS Metric Block Length (mm) Steel, CERA -516** -521* -531* -541* -551* * provided with Inspection Certificate ** provided with Calibration Certificate and Inspection Certificate Example: 611821-521 0.1mm gage block in grade 00. We make custom length gage blocks: 0.1-1000mm Inspection Certificate 0.1 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.2 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.3 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.4 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.5 0.51 0.52 Order No. Steel 611821 611860 611861 611862 611863 611822 611864 611865 611866 611867 611823 611868 611869 611870 611871 611824 611872 611873 611874 611875 611825 611876 611877 611878 611879 611826 611880 611881 611882 611883 611827 611884 611885 611886 611887 611828 611888 611889 611890 611891 611506 611892 611893 Length (mm) CERA — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 613506 — — 0.53 0.54 0.55 0.56 0.57 0.58 0.59 0.6 0.61 0.62 0.63 0.64 0.65 0.66 0.67 0.68 0.69 0.7 0.71 0.72 0.73 0.74 0.75 0.76 0.77 0.78 0.79 0.8 0.81 0.82 0.83 0.84 0.85 0.86 0.87 0.88 0.89 0.9 0.91 0.92 0.93 0.94 0.95 Order No. Steel 611894 611895 611896 611897 611898 611899 611900 611901 611902 611903 611904 611905 611906 611907 611908 611909 611910 611911 611912 611913 611914 611915 611916 611917 611918 611919 611920 611921 611922 611923 611924 611925 611926 611927 611928 611929 611930 611931 611932 611933 611934 611935 611936 E-9 Length (mm) CERA — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 0.96 0.97 0.98 0.99 0.991 0.992 0.993 0.994 0.995 0.996 0.997 0.998 0.999 1 1.0005 1.001 1.002 1.003 1.004 1.005 1.006 1.007 1.008 1.009 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.1 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 Order No. Steel 611937 611938 611939 611940 611551 611552 611553 611554 611555 611556 611557 611558 611559 611611 611520 611521 611522 611523 611524 611525 611526 611527 611528 611529 611561 611562 611563 611564 611565 611566 611567 611568 611569 611570 611571 611572 611573 611574 611575 611576 611577 611578 611579 CERA — — — — 613551 613552 613553 613554 613555 613556 613557 613558 613559 613611 613520 613521 613522 613523 613524 613525 613526 613527 613528 613529 613561 613562 613563 613564 613565 613566 613567 613568 613569 613570 613571 613572 613573 613574 613575 613576 613577 613578 613579

E-10 Length (mm) CERA — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 613642 — — — — 613613 613643 613614 613644 613615 613850 613645 613616 613646 613617 613647 613851 613618 613648 613619 613649 613671 613852 613650 613621 613651 613622 613652 613853 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 17.6 18 18.5 19 19.5 20 20.2 20.5 21 21.5 22 22.5 22.8 23 23.5 24 24.5 25 25.25 30 35 40 41.3 45 50 60 70 75 80 90 100 125 131.4 150 175 200 250 300 400 500 600 700 750 800 900 1000 Order No. Steel 611623 611653 611624 611654 611625 611655 611626 611656 611627 611657 611854 611628 611658 611629 611659 611672 611855 611660 611631 611661 611632 611662 611856 611633 611663 611634 611664 611635 611754 611673 611755 611674 611857 611756 611675 611676 611677 611801 611678 611679 611681 611802 611858 611803 611804 611682 611805 611683 611684 611685 611840 611841 611842 611843 611844 611845 CERA 613623 613653 613624 613654 613625 613655 613626 613656 613627 613657 613854 613628 613658 613629 613659 613672 613855 613660 613631 613661 613632 613662 613856 613633 613663 613634 613664 613635 613754 613673 613755 613674 613857 613756 613675 613676 613677 613801 613678 613679 613681 613802 613858 613803 613804 613682 613805 613683 613684 613685 — — — — — — Metric Wear Block Length (mm) 1 2 Order No. Tungsten carbide 612611 612612 DIMENSIONS Unit: mm Nominal length: 0.1mm - 5.5mm 9 Length -0.05 -0.2 Nominal Value Measuring face 0 30 -0.3 2.17 2.18 2.19 2.2 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.3 2.31 2.32 2.33 2.34 2.35 2.36 2.37 2.38 2.39 2.4 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.5 2.6 2.7 2.8 2.9 3 3.5 4 4.5 5 5.1 5.5 6 6.5 7 7.5 7.7 8 8.5 9 9.5 10 10.3 10.5 11 11.5 12 12.5 12.9 Order No. Steel 611717 611718 611719 611720 611721 611722 611723 611724 611725 611726 611727 611728 611729 611730 611731 611732 611733 611734 611735 611736 611737 611738 611739 611740 611741 611742 611743 611744 611745 611746 611747 611748 611749 611642 611750 611751 611752 611753 611613 611643 611614 611644 611615 611850 611645 611616 611646 611617 611647 611851 611618 611648 611619 611649 611671 611852 611650 611621 611651 611622 611652 611853 92123 Serial number Nominal length: 6mm - 10mm 9 -0.05 -0.2 Length mm Nominal Value 0 30 -0.3 Length (mm) CERA 613580 613581 613582 613583 613584 613585 613586 613587 613588 613589 613590 613591 613592 613593 613594 613595 613596 613597 613598 613599 613600 613601 613602 613603 613604 613605 613606 613607 613608 613609 613641 613516 613517 613518 613519 613612 — — — — — — — — — — — — — — — — — — — — — — — — — — 92123 Serial number Measuring face Nominal length: 10.3mm - 100mm 9 -0.05 -0.2 Length mm 0 35 -0.3 1.2 1.21 1.22 1.23 1.24 1.25 1.26 1.27 1.28 1.29 1.3 1.31 1.32 1.33 1.34 1.35 1.36 1.37 1.38 1.39 1.4 1.41 1.42 1.43 1.44 1.45 1.46 1.47 1.48 1.49 1.5 1.6 1.7 1.8 1.9 2 2.0005 2.001 2.002 2.003 2.004 2.005 2.006 2.007 2.008 2.009 2.01 2.02 2.03 2.04 2.05 2.06 2.07 2.08 2.09 2.1 2.11 2.12 2.13 2.14 2.15 2.16 Order No. Steel 611580 611581 611582 611583 611584 611585 611586 611587 611588 611589 611590 611591 611592 611593 611594 611595 611596 611597 611598 611599 611600 611601 611602 611603 611604 611605 611606 611607 611608 611609 611641 611516 611517 611518 611519 611612 611690 611691 611692 611693 611694 611695 611696 611697 611698 611699 611701 611702 611703 611704 611705 611706 611707 611708 611709 611710 611711 611712 611713 611714 611715 611716 Nominal Value 92123 Serial number Measuring face Nominal length 125mm - 1000mm Length 9 -0.05 -0.2 x0.211 Nominal Value 2-Ø10 x0.211 125 mm 0 35 -0.3 Length (mm) 92123 Measuring face Airy line 25 0.5 Serial number 25 0.5

Suffix Number for Selecting Standard and Certificate Provided ASME Grade K 00 0 AS-1 AS-2 Individual Inch Rectangular Gage Block SPECIFICATIONS Steel, CERA -516** -521* -531* -541* -551* Inch Block * provided with Inspection Certificate ** provided with Calibration Certificate and Inspection Certificate Example: 611310-521 .1" gage block in grade 00. We make custom length gage blocks: .004 - 20" Inspection Certificate DIMENSIONS Unit: Inch Nominal length: .004 - .25” -.002 .354 -.008 Length 0 1.181 -.012 Nominal Value Measuring face 92123 Serial number .354 -.002 -.008 Length mm 0 1.181 -.012 Nominal length: .3 - 4” Nominal Value 92123 Serial number Measuring face Nominal length: .45 - 4” -.002 .354 -.008 0 1.378 -.012 Length mm Nominal Value 92123 Serial number Measuring face Nominal length 5 - 20” Length .354 -.002 -.008 Nominal Value 2-Ø10 x0.211 5” 0 1.378 -.012 x0.211 92123 Measuring face .984 .02 Order No. Steel .004 611304 .005 611305 .006 611306 .007 611307 .008 611308 .009 611309 .01 611310 .011 611311 .012 611312 .013 611313 .014 611314 .015 611315 .016 611316 .017 611317 .018 611318 .019 611319 .02 611320 .02005 611240 .0201 611231 .0202 611232 .0203 611233 .0204 611234 .0205 611235 .0206 611236 .0207 611237 .0208 611238 .0209 611239 .021 611321 .022 611322 .023 611323 .024 611324 .025 611325 .026 611326 .027 611327 .028 611328 .029 611329 .03 611330 .031 611331 .03125 (1/32) 611101 .032 611332 .033 611333 .034 611334 .035 611335 .036 611336 .037 611337 .038 611338 .039 611339 .04 611340 .041 611341 .042 611342 .043 611343 .044 611344 .045 611345 .046 611346 .046875 (3/64) 611102 .047 611347 .048 611348 .049 611349 .05 611105 Airy line Serial number .984 .02 Order No. Steel .06 611106 .0625 611303 .07 611107 .078125 (5/64) 611103 .08 611108 .09 611109 .09375 (3/32) 611104 .1 611191 .100025 611111 .10005 611135 .100075 611112 .1001 611121 .1002 611122 .1003 611123 .1004 611124 .1005 611125 .1006 611126 .1007 611127 .1008 611128 .1009 611129 .101 611141 .102 611142 .103 611143 .104 611144 .105 611145 .106 611146 .107 611147 .108 611148 .109 611149 .109375 (7/64) 611110 .11 611150 .111 611151 .112 611152 .113 611153 .114 611154 .115 611155 .116 611156 .117 611157 .118 611158 .119 611159 .12 611160 .121 611161 .122 611162 .123 611163 .124 611164 .125 611165 .126 611166 .127 611167 .128 611168 .129 611169 .13 611170 .131 611171 .132 611172 .133 611173 .134 611174 .135 611175 .136 611176 .137 611177 .138 611178 Length (inch) Length (inch) CERA — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 613103 — — — — — — — — — — — — — — — 613104 — — — 613105 E-11 Length (inch) CERA — 613303 — 613100 — — 613101 613191 613110 613135 613111 613121 613122 613123 613124 613125 613126 613127 613128 613129 613141 613142 613143 613144 613145 613146 613147 613148 613149 613102 613150 613151 613152 613153 613154 613155 613156 613157 613158 613159 613160 613161 613162 613163 613164 613165 613166 613167 613168 613169 613170 613171 613172 613173 613174 613175 613176 613177 613178 .139 .14 .141 .142 .143 .144 .145 .146 .147 .148 .149 .15 .16 .17 .18 .19 .2 .21 .25 .3 .315 .35 .375 (3/8) .4 .420 .45 .5 .55 .6 .605 .65 .7 .710 .75 .8 .815 .85 .9 .920 .95 1 2 3 4 5 6 7 8 10 12 16 20 Order No. Steel 611179 611180 611181 611182 611183 611184 611185 611186 611187 611188 611189 611115 611116 611117 611118 611119 611192 611221 611212 611193 611209 611213 611113 611194 611210 611214 611195 611215 611196 611211 611216 611197 611220 611217 611198 611226 611218 611199 611227 611219 611201 611202 611203 611204 611205 611206 611207 611208 611222 611223 611224 611225 CERA 613179 613180 613181 613182 613183 613184 613185 613186 613187 613188 613189 613115 613116 613117 613118 613119 613192 613221 613212 613193 613209 613213 613112 613194 613210 613214 613195 613215 613196 613211 613216 613197 613220 613217 613198 613226 613218 613199 613227 613219 613201 613202 613203 613204 613205 613206 613207 613208 613222 613223 613224 613225 Inch Wear Block Length (inch) .05 .1 Order No. Tungsten carbide 612105 612191

Rectangular Gage Block with CTE Gage Blocks with Thermal Expansion Coefficient Data FEATURES Mitutoyo offers top-level gage blocks (steel and ceramic) which are superior to K class blocks. Double-faced interferometer (DFI) Comes with a highly accurate thermal expansion coefficient measured with a high-accuracy double-faced interferometer (DFI). The high-accuracy gage block interferometer (GBI) guarantees high dimensional accuracy. Mitutoyo offers rectangular gage blocks, having nominal values from 100 to 500mm Grade: K class in ASME Uncertainty of thermal expansion coefficient: 0.035 x 10-6/K (k 2) Uncertainty of dimension measurement: 30nm (k 2), for 100mm block SPECIFICATIONS Order No. Steel 611681-51B 611802-51B 611803-51B 611804-51B 611682-51B 611805-51B 611683-51B 611684-51B 611685-51B ASME Grade K Steel, CERA

in the manufacture of parts. Mitutoyo offers a complete selection of gage blocks available in a choice of rectangular or square, metric or inch and steel or CERA (ceramic) types. CERA Blocks CERA blocks, made of ceramic materials with superior surface quality, were developed by Mitutoyo's ultra-precision machining techniques

Related Documents:

The Sources of Variation in a Gage R&R Study Average and Range Gage R&R Analysis ANOVA Gage R&R Analysis EMP Gage R&R Analysis Comparison of Results Summary Quick Links The Data The data we will use is from the 4th edition of the Measurement Systems Analysis manual published by AIAG. In this Gage R&R study, there are three operators and ten parts.File Size: 809KBPage Count: 10

Linear Gage Gage Heads / Display Units Selection Guide G-2,3 Linear Gage LGK G-4 Linear Gage LGF G-5 . Ideal for integration into harsh environments . Attachment thread for thr

You can also use Gage R&R to determine where any weaknesses are. For example, you can use Gage R&R to figure out why different operators reported different readings. The Standard Approach to Gage R&R “You take 10 parts and have 3 operators measure each 2 times.” This approach to a Gage R&am

mag-gage.com Process Level Technology, Ltd. 281.332.6241 mag-gage.com Process Level Technology, Ltd. 281.332.6241 The Process Level Technology Mag-Gage is a proven method to measure liquid levels. The Mag-Gage is one of the safest and most economical ways to

Snatch Block, Shackle 6:24 Snatch Block, Hook 6:24 Snatch Block, others (page 6:29) 6:25 Tilt Wall Block 6:26 Oilfield Blocks 6:27 - 6:30 Tubing Block 6:27 Manhandler Block 6:28 Derrick Block 6:28 Laydown Block 6:29 Tong Line Block 6:30 Hay Fork Pulley 6:30 Guyline Block 6:30 J-Latches 6:31 T

Mitutoyo offers extra thin gage blocks from 0.10 mm to 0.99 mm (increments of 0.01 mm) as well as long : gage blocks up to 1,000 mm as standard products. Applications: Grade Workshop use Mounting tools and cutters AS-1 or AS-2 Manufacturing gages Calibrating instruments 0 or AS-1

Spring 2018 :: CSE 502 Simple Interleaved Main Memory Divide memory into n banks, “interleave” addresses across them so that cache-block A is –in bank “A mod n” –at block “A div n” Can access one bank while another one is busy Bank 0 Bank 1 Bank 2 Bank n Block in bank Bank Block 0 Block n Block 2n Block 1 Block n 1 Block .

From table 9.1, this diameter requires a class Z gage tolerance Hence, the diameter of the no-go gage would be 1.2506 /-0.00006 in. Disadvantage –If the hole to be gaged is reamed to the low limit, say, 1.2494 in., and if the no-go gage is at the low limit, 1.24934 in, then the gage enters the hole and part passes inspection