CONDUX - Comstar City
CONDUX 2 0 1 4 - 2 0 15 UNDERBRIDGE CONDUIT SUPPORT & BORE SPACER CONDUIT-IN-CASING SYSTEMS CATALOG Leading the world in the design & manufacture of conduit underbridge hanger systems and conduit bore spacers, Condux hangers are supporting conduit on over 3000 bridges worldwide, including San Francisco’s famous Golden Gate Bridge & the spectacular Sunshine Skyway Bridge in Tampa Bay. Special designs to meet your specific needs, large or small, is our hallmark. Condux engineers are ready to supply you with personalized service which will successfully accomplish your next bridge hanger project. Rapid turnaround is guaranteed thanks to computerized estimation design and manufacturing. No matter what stage of the project you’re in, Condux can help you secure the most cost-effective solution. www. CONDUX .com
providing labor-saving Good businesses know the importance of productivity and efficiency. That’s why we take pride in working directly with the industries we serve to offer tools that are engineered to reduce installation time and increase safety. Condux has the specialized tools to help you do the job right, and do it safely. Reliable Customer Service Every tool we sell is backed by our commitment to reliable Customer Service through our international network of knowledgeable representatives and our international Customer Service personnel. You will receive the most reliable customer support available anywhere. Product Training Seminars A product is most effective with the proper knowledge and training behind it. That’s why Condux offers in-depth product information and hands-on product training. Our outdoor facility has precast manholes, four conduit runs, power poles at the perimeter, handholes, and transformer boxes for realistic training. Participants work in both classroom and hands-on settings, with involvement in a variety of product installations over a two-day period. To our knowledge, all products and other information in this catalog are accurate at the time of printing. Condux International, Inc. reserves the right to change products and other information without prior notice. Tools shown in this catalog are designed for their intended use only by trained craftspeople. Before using any Condux tool, make certain you have read and understand any safe- ty, operating, and maintenance instructions for that tool. Call or write for any additional product information required for operation. All rights reserved. No part of this catalog may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storage on an information retrieval system without prior written permission from Condux International, Inc. Copyright 2014, Condux International, Inc. Litho in USA Catalog Part Number: CAT14-ETO
CONDUX INTERNATIONAL, INC. CONDUIT SUPPORT SYSTEMS & CONDUIT-IN-CASING SYSTEMS Table of Contents The Condux Engineering Advantage . 2 Underbridge Conduit Support Estimating Guide . 3 Underbridge Hanger Installation Guide . 4 Bracket Options .5-11 Conduit-In-Casing with Condux Bore Spacers .12-13 Bore Spacers Estimating Guide . 14 Our Schedule Will Fit Your Schedule . 15 Don’t Forget the Hidden Benefits . 15 How to Order . 15 Bore Spacers Product Ordering Guide .16-17 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 1
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS The Condux Engineering Advantage “Free” space allows the conduit movement that results from expansion/ contraction. Condux underbridge duct support systems are complete, pre-engineered and field-proven. The hangers can be provided in any configuration (horizontal and vertical) from our inventory of components and preassembled to your specifications. Support Features: Our experience is your assurance against problems such as conduit sagging and hanger weakening. t PSSPTJPO SFTJTUBOU GJCFSHMBTT construction t .BYJNVN TUSFOHUI UP XFJHIU SBUJP t 4RVBSF UVCFT JODPSQPSBUFE GPS increased strength Condux engineers are ready to design a support structure for your underbridge system. We will provide the following: Sagging conduit creates “nodes” which can damage the hanger. t PTU BOE EFMJWFSZ FWBMVBUJPO t "EWBODFE DPNQVUFS BJEFE EFTJHO DBQBCJMJUZ t &TUJNBUF CBTFE PO ZPVS JOGPSNBUJPO PS CSJEHF plans t #FTU IBOHFS TPMVUJPO GPS ZPVS BQQMJDBUJPO Support System Components Expansion Joint Braced Anchor Point / Stop Rings Intermediate Conduit Hanger Adapter Fitting 2 12” minimum www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## Underbridge Conduit Support Estimating Guide Threaded Support Rod, 3 4-10 Std. Call Condux—We will work with you to initialize the estimate. photocopies of this sheet and keep them with this design guide for future use. Threaded Intermediate Rod, 3 4-10 Std. Flat Crossbar (1 2” x 2”) Round Spacer Tube (1” Dia.) Square Crosstube (1 8” x 2” x 2”) A and then e-mail (cndxinfo@ condux.com) this order information sheet. an estimate. B (B 1) 1. Grid Type Hanger ! ! " Number of square crosstubes Flat bar material (FGL, PVC) Number of ducts high Round tube material (FGL, PVC) Number of ducts wide Square tube material (FGL, AL, HDG) Spacing between crossmembers (B) Hardware material (316, 304, HDG, ZNC) Spacing between rod centers (B 1”) Locations of support rods from left Overall length of support rods (A) Locations of square crosstubes from top Quantity Conduit OD and type (Example shown: 1 & 5) (Example shown: 2) 2. Adjustable Bar Brace X Capscrew (H) ! ! # Run (horizontal distance between bolt centers) (X) Rise (dist. from top of sq. tube to bottom of deck) (Y) Bolt diameter to be used at hanger (G) 4–10 Adj. Rod 3 ( 2” standard) 1 Y Threaded stud dia. to be used at support (H) (3 4” standard) Type of material (316, HDG) Brace can be adjusted at this point by adjusting the hexnuts Quantity % # Capscrew, Hexnut, Lock & Flat Washer (G) Name Address Zip Company City Phone ( ) State FAX ( ) E-mail Return Quotation by Materials required at job site by Mail or FAX a copy of this page to Condux www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 3
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Underbridge Hanger Installation Guide Adjustable Bar Brace 1. Begin at one abutment by installing a double bell stop coupling or adapter coupling onto the conduit that is protruding from the abutment. This conduit may be PVC, threaded steel, or fiberglass. 2. Install as many supports as are required to reach the first conduit joint. This may require the installation of expansion anchors into the bridge deck if concrete inserts or other means of support have not previously been installed. 3. Next, install the first piece of conduit and make the connection at the abutment according to standard practices for the type of conduit being used. Continue the process of installing segments of supports and conduit, working from one abutment to the other. No joint should be within 12 inches of a hanger. 4. Expansion joints are installed in the conduit system during this ongoing assembly process. The expansion joints must be placed at the required locations by attaching the expansion sleeve to the conduit that is in place. If the expansion sleeve is of the type that will accept the spigot end of the next conduit piece, then the next conduit piece should be insert to the halfway point of the sleeve allowing for equal movement in either direction.* If the expansion sleeve is of the type that requires an expansion nipple, then the nipple should be adjusted to the halfway point of the sleeve and subsequently assembled to the end of the next conduit section. A. Care must be taken that the expansion joints remain at mid-travel during the remainder of the installation process. The joint may be wrapped with tape for assurance. B. No expansion joint should be closer than 12 inches to any support. The ideal location is ¼ the distance to the next support. 5. Split stop rings are installed on the conduit at anchor points which occur at the midway point between expansion joints. When an anchor point location is reached, two stop rings should be slipped over the conduit section so that one falls on each side of the anchor point support. After the conduit connection has been made, and the last expansion joint has been checked to make sure that it has not moved, the stop rings can be epoxied to the outside of the conduit against each side of the support. Plastic tie wraps or tape can be used to hold the stop rings in place until the epoxy has cured. Adjustable Bar Brace A. It is convenient at this time to install the anchor point bracing between the anchor point support and the bridge deck. 6. The last section of conduit should be cut to length so that it fits end to end with the conduit that protrudes from the abutment. If the two conduits are the same, the connection can be made with a sleeve coupling or slip coupling. Simply slide the sleeve onto one of the conduits, apply epoxy to each end, place the ends together and slide the sleeve over the joint. If an adapter coupling is required, then the last connection is made by retracting the last expansion joint, thereby allowing enough space between the conduit ends to install the adapter. After the connection has been made, the expansion joint should be back at mid-travel.* *This principle holds true for a temperature range of approx. 50 – 70 F. Account for your jobsite ambient temperature when installing expansion joints. NOTE: Any calculations noted or implied in this guide are not to be used unless the results are validated by Condux engineers. 4 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS ATTACHMENT METHOD SEE PAGES 10 & 11 CONDUIT YOKE ROLLER HANGER THREADED ROD SIZE CONDUIT DEPTH ORDERING INFO QUANTITY: YOKE AND THREADED ROD MATERIAL: GALVANIZED OR STAINLESS CONDUIT SIZE: THREADED ROD SIZE: CONDUIT DEPTH: CONDUIT SIZE YOKE & THREADED ROD MATERIAL TYPE: ROLLER MATERIAL: ROLLER MATERIAL: GALVANIZED NOTE: STAINLESS DELRIN ATTACHMENT METHOD SEE PAGES 10 & 11 CONDUIT TWO ROD ROLLER HANGER THREADED ROD SIZE ORDERING INFO QUANTITY: CONDUIT DEPTH BLOCKS AND THREADED ROD MATERIAL: GALVANIZED OR STAINLESS CONDUIT SIZE: THREADED ROD SIZE: CONDUIT DEPTH: BLOCKS & THREADED ROD MATERIAL TYPE: CONDUIT SIZE ROLLER MATERIAL: ROLLER MATERIAL: GALVANIZED STAINLESS NOTE: DELRIN ATTACHMENT METHOD SEE PAGES 10 & 11 CONDUIT TURNBUCKLE HANGER THREADED ROD SIZE ORDERING INFO QUANTITY: CONDUIT DEPTH CONDUIT SIZE: TURNBUCKLE THREADED ROD SIZE: CONDUIT DEPTH: EYE BOLT WITH LEFT HAND THREADS MATERIAL TYPE: (GALVANIZED OR STAINLESS) CONDUIT SIZE NOTE: SPLIT PIPE CLAMP ATTACHMENT METHOD SEE PAGES 10 & 11 THREADED ROD SIZE CONDUIT DEPTH CONDUIT J-HANGER ORDERING INFO QUANTITY: CONDUIT SIZE: J-HANGER AND THREADED ROD MATERIAL: GALVANIZED OR STAINLESS THREADED ROD SIZE: CONDUIT DEPTH: J-HANGER & THREADED ROD MATERIAL TYPE: CONDUIT SIZE NOTE: www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 5
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS CONDUIT U-BOLT HANGER HARDWARE SIZE ORDERING INFO QUANTITY: CONDUIT SIZE: HARDWARE SIZE: MATERIAL TYPE: (GALVANIZED OR STAINLESS) U-BOLT CONDUIT SIZE NOTE: ATTACHMENT METHOD SEE PAGES 10 & 11 CONDUIT TWO EAR PIPE STRAP HANGER HARDWARE SIZE ORDERING INFO QUANTITY: TWO EAR PIPE STRAP CONDUIT SIZE: HARDWARE SIZE: CONDUIT SIZE SPACER PLATE THICKNESS: SPACER PLATE MATERIAL TYPE: (GALVANIZED, STAINLESS OR FIBERGLASS) NOTE: CONDUIT CLEVIS HANGER ATTACHMENT METHOD SEE PAGES 10 & 11 CONDUIT DEPTH THREADED ROD, HEX NUTS, LOCKWASHER ORDERING INFO QUANTITY: CONDUIT SIZE: THREADED ROD SIZE: CONDUIT DEPTH: MATERIAL TYPE: CONDUIT SIZE NOTE: ATTACHMENT METHOD SEE PAGES 10 & 11 MATERIAL CONDUIT SIDE MOUNT ORDERING INFO QUANTITY: MATERIAL SIZE: HOLE SIZE: MATERIAL TYPE: (GALVANIZED OR STAINLESS) HOLE SIZE NOTE: 6 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS I-BEAM ATTACHMENT A ORDERING INFO QUANTITY: B MEASUREMENT “A”: A MEASUREMENT “B”: I-BEAM CLAMP EYE NUT THREAD SIZE: MATERIAL TYPE: (GALVANIZED OR STAINLESS) A EYE NUT SECTION A-A NOTE: I-BEAM SIDE MOUNT ORDERING INFO QUANTITY: B MATERIAL SIZE A MEASUREMENT “A”: MEASUREMENT “B”: HARDWARE SIZE: MATERIAL SIZE: HARDWARE SIZE HOLE SIZE: HOLE SIZE MATERIAL TYPE: (GALVANIZED OR STAINLESS) NOTE: DOUBLE I-BEAM SIDE MOUNT A ORDERING INFO QUANTITY: MEASUREMENT “A”: C MEASUREMENT “B”: MATERIAL SIZE B MEASUREMENT “C”: MATERIAL SIZE: HOLE SIZE: HOLE SIZE MATERIAL TYPE: (GALVANIZED OR STAINLESS) NOTE: ATTACHMENT METHOD SEE PAGE ANGLE IRON HANGER MOUNT HOLE SIZE ORDERING INFO QUANTITY: MATERIAL GUSSET SIZE: A MATERIAL ANGLE IRON SIZE: MEASUREMENT: A: B: C: GUSSET SIZE B ANGLE IRON SIZE C D: E: HOLE SIZE: MATERIAL TYPE: (GALVANIZED OR STAINLESS) D E NOTE: HOLE SIZE www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 7
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS C-CLAMP ORDERING INFO QUANTITY: THREAD SIZE: A MEASUREMENT “A”: MATERIAL TYPE: (GALVANIZED OR STAINLESS) THREAD SIZE NOTE: EXISTING BRIDGE BEAM BOX TYPE ATTACHMENT ANGLE IRON CONDUX GRID TYPE SUPPORT HANGER OPTIONAL ATTACHMENTS CALL CONDUX INTERNATIONAL ENGINEERING DEPARTMENT FOR ORDERING ASSISTANCE THREADED ROD, HEX NUT, LOCK AND FLAT WASHER ANGLE CLIP ATTACHMENT EXISTING BRIDGE BEAM ANGLE CLIP CAPSCREW, HEXNUT, LOCK AND FLAT WASHER CONDUX GRIDE TYPE SUPPORT HANGER EXISTING BRIDGE BEAM FLAT BAR CONDUX GRIDE TYPE SUPPORT HANGER BEAM CLAMP ATTACHMENT CAPSCREW, HEX NUT LOCK AND FLAT WASHER FLAT BAR BEAM CLAMP 8 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS HANGER BRACE ANGLE IRON B HARDWARE SIZE ORDERING INFO QUANTITY: A MEASUREMENT “A”: MEASUREMENT “B”: HARDWARE SIZE: ANGLE: 2 X 2 X 1/4 MATERIAL TYPE: (GALVANIZED OR STAINLESS) FITTING: 1/4 X 2.0 NOTE: HARDWARE SIZE B HANGER BRACE ADJUSTABLE ORDERING INFO QUANTITY: A MEASUREMENT “A”: MEASUREMENT “B”: 3/4" THREADED ROD HARDWARE SIZE: MATERIAL TYPE: (GALVANIZED OR STAINLESS) NOTE: GUY STRAND CLAMP STRAND OPENING: 3/16 THRU 3/8 3-BOLT ORDERING INFO QUANTITY 3-BOLT: 1-BOLT: STRAND OPENING: 3/16 THRU 3/8 1-BOLT MATERIAL TYPE: (GALVANIZED OR STAINLESS) NOTE: HOT DIP GALVANZIED IS ONLY AVAILABLE IN A 3-BOLT CLAMP NOTE: GUY STRAND WIRE ORDERING INFO STRAND SIZE: 1/4” OR 3/8” LENGTH: GUY STRAND DIAMETER MATERIAL TYPE: (GALVANIZED OR STAINLESS) NOTE: www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 9
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS THREAD SIZE CONCRETE STUD INSERT ORDERING INFO QUANTITY: THREAD SIZE: LENGTH LENGTH: MATERIAL TYPE: (ELECTRO GALVANIZED OR STAINLESS STEEL) NOTE: HOT DIP GALVANIZED INSERTS ARE THREADED OVERSIZED TO FIT HOT DIP GALVANIZED THREADS CONCRETE CAST-IN PLACE LOOP INSERT ORDERING INFO QUANTITY: THREAD SIZE: MATERIAL TYPE: (ELECTRO GALVANIZED, HOT DIP GALVANIZED OR STAINLESS STEEL 303 TYPE) THREAD SIZE NOTE: CONCRETE CAST-IN PLACE SETTING PLUG ORDERING INFO QUANTITY: THREAD SIZE: THREAD SIZE NOTE: CONCRETE DROP IN WEDGE ANCHOR ORDERING INFO QUANTITY: THREAD SIZE: MATERIAL TYPE: (ELECTRO GALVANIZED OR STAINLESS STEEL 303 TYPE) THREAD SIZE 10 NOTE: www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
UNDERBRIDGE CONDUIT SUPPORT SYSTEMS Visit the Engineer to Order Products % ! "## BRACKET OPTIONS CONCRETE EXPOY ADHESIVE CAPSULT INSERT ORDERING INFO QUANTITY: EPOXY CAPSULE SIZE: SIZE NOTE: CONCRETE THREADED ANCHOR ROD ORDERING INFO QUANTITY: THREAD SIZE: LENGTH LENGTH: MATERIAL TYPE: (ELECTRO GALVANIZED, HOT DIP GALVANIZED OR STAINLESS STEEL) TREADED SIZE NOTE: INJECTION ADHESIVE ANCHOR SYSTEM MIXING TIP DESCRIPTION: TWO PART ADHESIVE TWO PART ADHESIVE QTY: DISPENSER GUN QTY: WIRE BRUSH SIZE: QUANTITY: REPLACEMENT MIXING TIP QTY: WIRE BRUSH DISPENSER GUN NOTE: CONCRETE CAST-IN PLACE ADJUSTABLE INSERT ORDERING INFO QUANTITY: THREAD SIZE: TREADED SIZE MATERIAL TYPE: HOT DIP GALVANIZED NOTE: www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 11
BORE SPACERS CONDUIT-IN-CASING SYSTEMS Conduit-In-Casing with Condux Bore Spacers The Process Conduit-in-casing is a simple process that allows telecom and power utilities to quickly and easily place power and communication cable below ground and under structures such as roadways, rail lines, etc. After the casing is installed and soil removed, multiple ducts supported by Condux Bore Spacers are then installed. Grout is typically injected between the individual ducts. Once the grout has cured, the telecom/power cables are pulled into place. Maximum Protection & Effectiveness Condux Bore Spacers are designed to support the conduit bundles reliably throughout the installation process and help disperse installation stress. This protects the conduit, which, in turn, protects the installed cables. In addition, bore spacers keep the conduit well organized inside of the casing, which allows for easy cable installation and quick identification for future installation in any unused conduit. Condux Bore Spacers also help maximize the allotted space within the diameter of a casing by facilitating the safe installation of the greatest number of conduit within that casing. This saves time and money. are used in conjunction with the stabilization holes to counteract rotational torque placed on the duct bank during installation and prevent twisting. In addition, Condux Bore Spacers can be equipped with heavy-duty casters to improve installation times. Special float stops also help protect the conduit during the application of grout. .PTU JNQPSUBOUMZ POEVY #PSF 4QBDFST are manufactured to job site specifications based on the size of the casing and the number of conduits required. This also lets the end user specify the minimum separation between individual duct runs, as well as the number, size and configuration of the grout holes. Grout Groutt is typically used to fill the space between een the ducts and casing once they are in place. The grout serves several ral purposes. Custom Bore Spacer Design Bore spacer design is essential for proper conduit installation and alignment, which ultimately contributes to the reliability and longevity of the system. Condux Bore Spacers are manufactured with several innovative features like special contoured grout flow holes and stabilization holes. Contoured grout flow holes make grout injection fast and efficient. Ropes or cables 12 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
BORE SPACERS CONDUIT-IN-CASING SYSTEMS Conduit-In-Casing with Condux Bore Spacers First, grout helps stabilize the conduit, especially when cable is being pulled in place. This will help limit the potential for the duct bank to collapse either from the force being applied during cable installation or due to the weight of the cables themselves. Second, grout also helps keep the duct bank in place, preventing it from moving because of the unbalanced weight distribution of placed cables. Finally, grout isolates the individual conduit from one another, further protecting them in case of a cable fault, as well as minimizing heat transfer when used in a power utility application. Choosing the right grout for the project is another essential component of a successful installation. The objective is to completely fill the annular space of the casing, without damaging the conduits. Contact Condux for specific conduit-in-casing grout options. www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 13
BORE SPACERS CONDUIT-IN-CASING SYSTEMS Bore Spacers Estimating Guide t Call Condux - we will work with you to initialize the estimate. t We suggest you make several photocopies of this sheet and keep them with this design guide for future use. t Use the area below to sketch your ideas if necessary. t Fill out and mail, FAX or scan and e-mail (cndxinfo@condux.com) this order information sheet. t Condux will provide you with an estimate. Casing I.D. (Inches) O.D. Diameter and Type of Duct NOTE: Condux Bore Spacers are not intended for use with steel conduit. Number of Ducts Minimum Duct Separation (if required) Grout (if required) Y-N Casters (if required) Y-N Quantity (if known) Length of Bore % # Name Address Zip Company City Phone ( ) State FAX ( ) E-mail Return Quotation by Materials required at job site by Mail, FAX or scan and e-mail (cndxinfo@condux.com) a copy of this page to Condux 14 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
BORE SPACERS CONDUIT-IN-CASING SYSTEMS Our Schedule Will Fit Your Schedule The Condux Bore Spacer program is specially designed to ensure fast turnaround for all aspects of spacer design and manufacture. Even though the spacers are a custom designed product, our rapid turnaround will make it seem like we just took them right out of inventory. This rapid response includes all aspects of spacer production including: Design All we need is the size of the casing and the number of conduits you need to install. We’ll get back to you immediately with a recommended design. Quotation Once the design is approved, we will generate a quotation that spells out a guaranteed project price - and a delivery rate! Manufacture Turnaround time to fill your bore spacer order is measured in days, not weeks or months. In most cases the bore spacers are ready for shipment in 10 working days or less! Don’t Forget the Hidden Benefits The real value of Condux Bore Spacers may be in the support that’s available from Condux if you need it. With our many years of experience dealing with conduit and cable installation problems, we’re an excellent source of information and expertise. You can count on us at every step of the way to help you keep small problems from becoming major headaches, but more importantly, to help you set up the job right in the first place. Whatever help you need, count on Condux. How to Order Ø6.75 Establish your conduit installation procedure early in the project development. Then call us and let us know what you need, or use the estimating guide on page 16 of this catalog. We’ll take it from there. OPENING FOR GROUT FLOW Ø27.75 Ø2.50 OPENING FOR GROUT FLOW OPENING FOR CASTER Condux Bore Spacers.When the Engineering Matters www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 15
BORE SPACERS PRODUCT ORDERING GUIDE Banding/Strapping Part No. Description 02290127 Steel Banding 3/4” wide by 1800 ft. coil (2070 lbs) Tensioner Part No. Description 02290128 Industrial Banding Tensioner Sealer Part No. Description 02290129 Industrial Banding Sealer 16 www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442
BORE SPACERS PRODUCT ORDERING GUIDE Cutter Part No. Description 02290130 Industrial Banding Cutter Metal Seals Part No. Description 02290131 Box of 3/4” wide steel seals (approx. 1,000 per box) Carts Part No. Description 02290132 Heavy duty deluxe steel banding cart www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 17
Condux Customer Commitment U X N D C O UNDE RGRTO E D OGU L N A U A OLS C IAL & AER UIPMENT & TO EQ TOOLS AERIAL ING & RODD G IN FISH SORIES ES C C S&A SWIVEL SORIES & ACCES G EYES N PULLIN ALLATIO ST IN CABLE POWER ATION LL A ST ABLE IN FIBRE C CTS PRODU OTHER You can be confident when you order from Condux that every product we sell is backed by our commitment to reliable Customer Service through our network of knowledgeable Condux Representatives and our internal Customer Service personnel. Cable Installation Equipment & Tools OUND For the latest in solutions, tools, and equipment for cable installation, the new Condux cable Installation Catalog is just what you need. It features over 250 photos and illustrations of the latest time and money-saving products to assist power utilities, telephone companies, and electrical contractors with installing cable. An expanded offering in fiber optic products is included in this latest edition. Products include: duct rodders, cable pullers, pulling eyes, swivels, cable guides, sheaves and much more. C A B LE IN S TA LL ATI U IP M ON EQ TO O L S ENT & C A TA LO To receive a catalog or place an order, contact your Condux Representative or call Condux Customer Service at the number below. GUE w w w .c on d u x. eu CONDUX INTERNATIONAL, INC. CONDUX.com
www.CONDUX.com t TOLL-FREE (US & Canada) t TEL. t FAX 1-507-387-1442 UNDERBRIDGE CONDUIT SUPPORT SYSTEMS 2 The Condux Engineering Advantage Condux underbridge duct support systems are complete, pre-engineered and field-proven. The hangers can be provided in any configuration
C A B L E B L O w i N ghand held Fiber Blower The Condux hand held fiber blower is ideal for shorter run fiber optic cable or micro fiber optic cable installations. The unit's hinged design makes it easy to install and remove duct and fiber. The Condux hand held fiber blower installs fiber from 0.20 inches (5.8 mm) to 1.13 inches (28.7 mm)
The Condux Fiber Optic Cable Blower is precision manufactured in the USA by Condux International, Inc. Over four decades of technical experience and superior customer service is behind every product sold. Smart Design, Easy to Operate Convenient tilting of the Condux Gulfstream 400 Deluxe Fiber
The Condux winch line blower will work with nearly all type of existing steel cable winches that are currently being used for the installation of underground utility cables. Because of the unique design of the winch line blower, it will operate in a wide range of conduit sizes, from 2to 6 inch duct,
Page 6 of 18 City of Glendale Casanova, Pastor City of Inglewood Frisby, Harry City of Inglewood Morrow, Dan City of Inglewood Nunez, Victor City of Inglewood Puglese, Peter City of Irvine Nguyen, Sally City of La Verne Ciotti, Anthony City of La Verne Jarvinen, Clay City of La Verne Keesey, Daniel City of Laguna Niguel Abreni
Nine roles city governments can play to support innovation and entrepreneurship 12 OPENNESS 14 1. CITY AS REGULATOR 15 2. CITY AS ADVOCATE 18 3. CITY AS CUSTOMER 21 INFRASTRUCTURE 24 4.CITY AS HOST 25 5. CITY AS INVESTOR 28 6.CITY AS CONNECTOR 31 LEADERSHIP 34 7. CITY AS STRATEGIST 35 8. CITY AS DIGITAL GOVERNOR 38 9. CITY AS DATAVORE 41 .
13 AC- 13 09.08.1967 Surveyor 5 Atlas-LV3C Centaur-D Lewis . 43 AC- 38 05.13.1976 Comstar 1A Atlas-SLV3D Centaur-D1AR Lewis . Atlas [Centaur] 2A 81 AC-105 06.09.1992 Intelsat K Atlas Centaur-2A Gen Dynamics 88 AC-
8719 Brooks Drive Easton, Maryland 21601 www.gipe.net marketing@gipe.net . Consultant and Professional Development Services Room to Discover 1426 Briarcliff Avenue Charlottesville, Virginia 22903 . 610-692-4021 Comstar is a full-service technology provider. We
Anatomy is the study of the structure of living things. b. Physiology is the science of the functioning of living organisms and their component parts. SELF-ASSESSMENT EXERCISE 2 i. Factors that determine divisions in anatomy are: a. Degree of structural detail under consideration 5. HEM 604 BASIC ANATOMY AND PHYSIOLOGY OF HUMAN BODY b. Specific processes c. Medical application ii. The analysis .
